Complete Mars Mission Collection (K7699-1)
Price Comparison
No retailers currently stock Complete Mars Mission Collection in The United States.
Browse the 1061 part types in set K7699-1 with individual pricing from BrickLink or Brick Owl.
Pricing information known of 1022/1061 parts.
| Part | Color | Quantity | Average price | Total | Value | |
|---|---|---|---|---|---|---|
![]() | Technic Rubber Belt Medium [24mm ID] [Round Cross Section] ![]() | 4 x $19.64 $78.57 | ||||
![]() | Technic Rubber Belt Medium [24mm ID] [Round Cross Section] ![]() | 4 x $19.64 $78.57 | ||||
![]() | Brick Special 2 x 24 with 2 End Pegs ![]() | 2 x $11.43 $22.86 | ||||
![]() | Turntable 4 x 4 Top, Locking ![]() | 1 x $20.38 $20.38 | ||||
![]() | Bar 6.6L with Stop Ring [Umbrella Stand] ![]() | 2 x $9.65 $19.29 | ||||
![]() | Windscreen 6 x 6 x 3 Canopy Half Sphere with Dual 2 Fingers ![]() | 1 x $18.88 $18.88 | ||||
![]() | Wedge Plate 4 x 9 without Stud Notches ![]() | 2 x $9.26 $18.51 | ||||
![]() | Turntable 4 x 4 Locking Grooved Base ![]() | 1 x $17.47 $17.47 | ||||
![]() | Minifig Neckwear Jet Pack with Front Stud ![]() | 1 x $14.28 $14.28 | ||||
![]() | Tile Round 2 x 2 with Bottom Cross ![]() | 10 x $0.98 $9.79 | ||||
![]() | Technic Axle Connector 2 x 3 with Ball Socket, Open Sides ![]() | 7 x $1.36 $9.49 | ||||
![]() | Axle Hose, Soft 11L ![]() | 1 x $9.23 $9.23 | ||||
![]() | Windscreen 9 x 3 x 1 2/3 Bubble Canopy ![]() | 1 x $8.09 $8.09 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | 7 x $1.11 $7.79 | ||||
![]() | Technic Pin Connector Round [No Slot] ![]() | 4 x $1.88 $7.51 | ||||
![]() | Projectile, Large Figure Weapon, Zamor Sphere / Ball ![]() | 3 x $2.37 $7.12 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 4 x $1.76 $7.03 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | 6 x $1.11 $6.68 | ||||
![]() | Tile Round 2 x 2 with Bottom Cross ![]() | 6 x $0.98 $5.88 | ||||
![]() | Equipment Martian Hypersled with Pin (Mars Mission) ![]() | 3 x $1.96 $5.88 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 3 x $1.76 $5.27 | ||||
![]() | Technic Steering Pulley Large ![]() | 2 x $2.43 $4.86 | ||||
![]() | Technic Steering Pulley Large ![]() | 2 x $2.43 $4.86 | ||||
![]() | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout ![]() | 6 x $0.80 $4.83 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 7 x $0.64 $4.51 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | 4 x $1.11 $4.45 | ||||
![]() | Flexible Ribbed Hose 8mm Ends 19L ![]() | 3 x $1.42 $4.27 | ||||
![]() | Hose, Ribbed 7mm D. 4L / 3.2cm ![]() | 7 x $0.60 $4.23 | ||||
![]() | Technic Brick Special 2 x 2 with Ball Socket Reinforced and Axle Hole ![]() | 1 x $4.00 $4.00 | ||||
![]() | Equipment Martian Hypersled with Pin (Mars Mission) ![]() | 2 x $1.96 $3.92 | ||||
![]() | Equipment Martian Hypersled with Pin (Mars Mission) ![]() | 2 x $1.96 $3.92 | ||||
![]() | Brick Sloped 75° 2 x 2 x 3 [Hollow Studs] ![]() | 2 x $1.96 $3.92 | ||||
![]() | Equipment Martian Hypersled with Pin (Mars Mission) ![]() | 2 x $1.96 $3.92 | ||||
![]() | Tile 1 x 2 with Avionics Copper, Red & Silver Controls Print ![]() | 1 x $3.78 $3.78 | ||||
![]() | Technic Beam Triangle Thin [Type I] ![]() | 8 x $0.47 $3.76 | ||||
![]() | Technic Tread Large [36 Links] ![]() | 2 x $1.82 $3.65 | ||||
![]() | Technic Brick 1 x 16 [15 Pin Holes] ![]() | 4 x $0.91 $3.65 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 2 x $1.76 $3.52 | ||||
![]() | Technic Beam 3 x 5 L-Shape with Quarter Ellipse Thin ![]() | 1 x $3.43 $3.43 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | 3 x $1.11 $3.34 | ||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End ![]() | 4 x $0.82 $3.27 | ||||
![]() | Slope, Curved 8 x 8 x 2 Double with Cutout ![]() | 2 x $1.64 $3.27 | ||||
![]() | Technic Gear 8 Tooth ![]() | 3 x $1.09 $3.26 | ||||
![]() | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout ![]() | 4 x $0.80 $3.22 | ||||
![]() | Antenna 1 x 4 with Rounded Top ![]() | 8 x $0.40 $3.22 | ||||
![]() | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°] ![]() | 6 x $0.54 $3.22 | ||||
![]() | Projectile, Weapon Disc 2 x 2 with Marbled Yellow Pattern ![]() | 6 x $0.51 $3.06 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 17 x $0.17 $2.97 | ||||
![]() | Technic Pin 3/4 ![]() | 10 x $0.30 $2.95 | ||||
![]() | Tile Round 2 x 2 with Bottom Cross ![]() | 3 x $0.98 $2.94 | ||||
![]() | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section ![]() | 6 x $0.48 $2.90 | ||||
![]() | Flexible Ribbed Hose 8mm Ends 19L ![]() | 2 x $1.42 $2.84 | ||||
![]() | Flexible Ribbed Hose 8mm Ends 19L ![]() | 2 x $1.42 $2.84 | ||||
![]() | Brick 1 x 16 ![]() | 6 x $0.47 $2.82 | ||||
![]() | Fairing 1 x 4 Side Flaring Intake with Two Pins ![]() | 2 x $1.37 $2.74 | ||||
![]() | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar ![]() | 1 x $2.64 $2.64 | ||||
![]() | Technic Pin Long without Friction Ridges - Single Slot ![]() | 3 x $0.86 $2.58 | ||||
![]() | Brick Sloped Inverted 45° 6 x 4 Double with 4 x 4 Recessed ![]() | 5 x $0.51 $2.55 | ||||
![]() | Brick Wedged, Curved 12 x 3 Right ![]() | 1 x $2.54 $2.54 | ||||
![]() | Brick Wedged, Curved 12 x 3 Right ![]() | 1 x $2.54 $2.54 | ||||
![]() | Brick Wedged, Curved 12 x 3 Right ![]() | 1 x $2.54 $2.54 | ||||
![]() | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole ![]() | 8 x $0.31 $2.47 | ||||
![]() | Plate 8 x 8 ![]() | 2 x $1.22 $2.44 | ||||
![]() | Plate 2 x 8 ![]() | 13 x $0.17 $2.27 | ||||
![]() | Brick 1 x 2 x 2 with Inside Axle Holder ![]() | 6 x $0.38 $2.25 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | 2 x $1.11 $2.23 | ||||
![]() | Technic Axle Connector Ridged [with x Hole x Orientation] ![]() | 2 x $1.09 $2.17 | ||||
![]() | Technic Gear 8 Tooth ![]() | 2 x $1.09 $2.17 | ||||
![]() | Large Figure Skeletal, Limb, Angular with Ball Joint, and Axle Hole ![]() | 6 x $0.36 $2.17 | ||||
![]() | Technic Axle 32 ![]() | 1 x $2.15 $2.15 | ||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] ![]() | 4 x $0.54 $2.15 | ||||
![]() | Technic Brick 1 x 16 [15 Pin Holes] ![]() | 2 x $1.01 $2.01 | ||||
![]() | Brick 1 x 6 ![]() | 7 x $0.28 $1.97 | ||||
![]() | Tile Round 2 x 2 with Bottom Cross ![]() | 2 x $0.98 $1.96 | ||||
![]() | Tile Round 2 x 2 with Bottom Cross ![]() | 2 x $0.98 $1.96 | ||||
![]() | Equipment Martian Hypersled with Pin (Mars Mission) ![]() | 1 x $1.96 $1.96 | ||||
![]() | Equipment Martian Hypersled with Pin (Mars Mission) ![]() | 1 x $1.96 $1.96 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 4 x $0.48 $1.93 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 4 x $0.48 $1.93 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 4 x $0.48 $1.93 | ||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End ![]() | 1 x $1.91 $1.91 | ||||
![]() | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°] ![]() | 2 x $0.94 $1.88 | ||||
![]() | Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Across Part) ![]() | 4 x $0.46 $1.82 | ||||
![]() | Engine, Large ![]() | 2 x $0.91 $1.82 | ||||
![]() | Technic Brick 1 x 16 [15 Pin Holes] ![]() | 2 x $0.91 $1.82 | ||||
![]() | Tap 1 x 1 with Hole in Spout ![]() | 2 x $0.91 $1.82 | ||||
![]() | Tap 1 x 1 with Hole in Spout ![]() | 2 x $0.91 $1.82 | ||||
![]() | Tile 1 x 8 with Groove ![]() | 11 x $0.16 $1.77 | ||||
![]() | Technic Axle 3 with Stud ![]() | 4 x $0.43 $1.72 | ||||
![]() | Brick Round Corner 4 x 4 Full Brick ![]() | 4 x $0.43 $1.72 | ||||
![]() | Technic Axle Connector 2 x 3 with Ball Socket, Open Sides ![]() | 1 x $1.72 $1.72 | ||||
![]() | Technic Pin Long without Friction Ridges - Single Slot ![]() | 2 x $0.86 $1.72 | ||||
![]() | Brick Wedged, Curved 12 x 3 Left ![]() | 1 x $1.70 $1.70 | ||||
![]() | Brick Wedged, Curved 12 x 3 Left ![]() | 1 x $1.70 $1.70 | ||||
![]() | Brick Wedged, Curved 12 x 3 Left ![]() | 1 x $1.70 $1.70 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 14 x $0.12 $1.69 | ||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End ![]() | 2 x $0.82 $1.64 | ||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End ![]() | 2 x $0.82 $1.64 | ||||
![]() | Antenna 1 x 4 with Rounded Top ![]() | 4 x $0.40 $1.61 | ||||
![]() | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout ![]() | 2 x $0.80 $1.61 | ||||
![]() | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout ![]() | 2 x $0.80 $1.61 | ||||
![]() | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout ![]() | 2 x $0.80 $1.61 | ||||
![]() | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout ![]() | 2 x $0.80 $1.61 | ||||
![]() | Wheel Hard Plastic Small (22mm D. x 24mm) ![]() | 6 x $0.27 $1.61 | ||||
![]() | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth ![]() | 2 x $0.75 $1.50 | ||||
![]() | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth ![]() | 2 x $0.75 $1.50 | ||||
![]() | Technic Beam 1 x 13 Thick ![]() | 2 x $0.74 $1.48 | ||||
![]() | Weapon Gun / Torch (Space) [with Grooves] ![]() | 2 x $0.72 $1.45 | ||||
![]() | Plate 2 x 8 ![]() | 6 x $0.24 $1.45 | ||||
![]() | Flexible Ribbed Hose 8mm Ends 19L ![]() | 1 x $1.42 $1.42 | ||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch ![]() | 2 x $0.71 $1.42 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 8 x $0.17 $1.40 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 8 x $0.17 $1.40 | ||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick U Clip] ![]() | 6 x $0.23 $1.37 | ||||
![]() | Technic Beam 1 x 15 Thick ![]() | 3 x $0.46 $1.37 | ||||
![]() | Tile Special 1 x 1 with Clip and Straight Tips ![]() | 2 x $0.68 $1.37 | ||||
![]() | Tile Special 1 x 1 with Clip and Straight Tips ![]() | 2 x $0.68 $1.37 | ||||
![]() | Brick 2 x 10 ![]() | 2 x $0.68 $1.37 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 11 x $0.12 $1.33 | ||||
![]() | Technic Axle 3 with Stud ![]() | 3 x $0.43 $1.29 | ||||
![]() | Hose, Ribbed 7mm D. 4L / 3.2cm ![]() | 2 x $0.64 $1.29 | ||||
![]() | Windscreen 10 x 6 x 2 Curved ![]() | 2 x $0.64 $1.29 | ||||
![]() | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim ![]() | 4 x $0.32 $1.29 | ||||
![]() | Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly] ![]() | 1 x $1.26 $1.26 | ||||
![]() | Windscreen 4 x 4 Roll Cage ![]() | 1 x $1.26 $1.26 | ||||
![]() | Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly] ![]() | 1 x $1.26 $1.26 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove ![]() | 4 x $0.31 $1.23 | ||||
![]() | Plate 4 x 4 ![]() | 5 x $0.24 $1.21 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 8 x $0.15 $1.18 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 8 x $0.15 $1.18 | ||||
![]() | Brick 1 x 10 ![]() | 3 x $0.39 $1.17 | ||||
![]() | Brick 2 x 6 ![]() | 5 x $0.23 $1.14 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove ![]() | 4 x $0.28 $1.13 | ||||
![]() | Cylinder 9 x 4 x 2 Tapered with Flat Bottom, Pin Holes ![]() | 3 x $0.38 $1.13 | ||||
![]() | Technic Axle 12 ![]() | 3 x $0.38 $1.13 | ||||
![]() | Technic Axle and Pin Connector Angled #6 - 90° ![]() | 6 x $0.19 $1.13 | ||||
![]() | Brick Wedged, Curved 8 x 3 x 2 Open Left ![]() | 1 x $1.11 $1.11 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 41 x $0.03 $1.10 | ||||
![]() | Brick Wedged, Curved 8 x 3 x 2 Open Right ![]() | 1 x $1.07 $1.07 | ||||
![]() | Wheel Hard Plastic Small (22mm D. x 24mm) ![]() | 4 x $0.27 $1.07 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 6 x $0.17 $1.05 | ||||
![]() | Brick Sloped 2 x 2 No Studs, with 3 Side Pistons Raised Edges ![]() | 3 x $0.35 $1.05 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 6 x $0.17 $1.05 | ||||
![]() | Brick Curved 2 x 2 No Studs - 3 Recessed Side Ports ![]() | 2 x $0.51 $1.02 | ||||
![]() | Technic Brick 1 x 12 [11 Pin Holes] ![]() | 2 x $0.51 $1.02 | ||||
![]() | Brick Curved 2 x 2 No Studs - 3 Recessed Side Ports ![]() | 2 x $0.51 $1.02 | ||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] ![]() | 3 x $0.34 $1.01 | ||||
![]() | Plate 4 x 10 ![]() | 1 x $0.99 $0.99 | ||||
![]() | Brick Wedged, Curved 16 x 4 Triple with Inner Ridges ![]() | 1 x $0.98 $0.98 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 6 x $0.16 $0.97 | ||||
![]() | Plate 2 x 8 ![]() | 6 x $0.16 $0.97 | ||||
![]() | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth ![]() | 6 x $0.16 $0.97 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 2 x $0.48 $0.97 | ||||
![]() | Technic Brick 4 x 6 with 2 x 4 Opening ![]() | 2 x $0.48 $0.97 | ||||
![]() | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section ![]() | 2 x $0.48 $0.97 | ||||
![]() | Brick 1 x 8 ![]() | 3 x $0.32 $0.97 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 8 x $0.12 $0.97 | ||||
![]() | Plate Special 4 x 4, Studs on One Edge Plain] ![]() | 4 x $0.24 $0.97 | ||||
![]() | Tile Special 1 x 1 with Clip and Straight Tips ![]() | 2 x $0.47 $0.94 | ||||
![]() | Plate 2 x 12 ![]() | 5 x $0.19 $0.94 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 34 x $0.03 $0.91 | ||||
![]() | Brick Round 2 x 2 x 2 Robot Body, Axle Holder 'X' Orientation ![]() | 2 x $0.46 $0.91 | ||||
![]() | Engine, Large ![]() | 1 x $0.91 $0.91 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 11 x $0.08 $0.89 | ||||
![]() | Dish 3 x 3 Inverted [Radar] ![]() | 6 x $0.15 $0.89 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 6 x $0.15 $0.89 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 2 x $0.43 $0.86 | ||||
![]() | Technic Brick 4 x 4 with 2 x 2 Opening ![]() | 1 x $0.86 $0.86 | ||||
![]() | Technic Axle and Pin Connector Perpendicular Double Split ![]() | 4 x $0.21 $0.86 | ||||
![]() | Tile Special 2 x 3 with 2 Clips [Thick U Clips] ![]() | 4 x $0.21 $0.86 | ||||
![]() | Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth ![]() | 3 x $0.28 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Headwear Accessory Visor For Standard Helmet ![]() | 1 x $0.85 $0.85 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 7 x $0.12 $0.85 | ||||
![]() | Technic Bush ![]() | 31 x $0.03 $0.83 | ||||
![]() | Minifig Head [Plain] [Blocked Open Stud] ![]() | 2 x $0.42 $0.83 | ||||
![]() | Brick Curved 2 x 2 No Studs - 3 Recessed Side Ports ![]() | 2 x $0.40 $0.80 | ||||
![]() | Technic Pin Double with Axle Hole ![]() | 4 x $0.20 $0.80 | ||||
![]() | Plate 2 x 3 ![]() | 12 x $0.07 $0.80 | ||||
![]() | Technic Axle 7 ![]() | 12 x $0.07 $0.80 | ||||
![]() | Technic Axle Connector Ridged [with x Hole x Orientation] ![]() | 1 x $0.79 $0.79 | ||||
![]() | Technic Brick Special 2 x 2 with Solid Ball and Axle Hole ![]() | 2 x $0.39 $0.78 | ||||
![]() | Technic Axle 12 ![]() | 2 x $0.38 $0.75 | ||||
![]() | Cylinder 9 x 4 x 2 Tapered with Flat Bottom, Pin Holes ![]() | 2 x $0.38 $0.75 | ||||
![]() | Technic Axle 12 ![]() | 2 x $0.38 $0.75 | ||||
![]() | Plate 2 x 16 ![]() | 2 x $0.38 $0.75 | ||||
![]() | Propeller 8 Blade 5 Diameter ![]() | 2 x $0.38 $0.75 | ||||
![]() | Cylinder 9 x 4 x 2 Tapered with Flat Bottom, Pin Holes ![]() | 2 x $0.38 $0.75 | ||||
![]() | Plate Special 4 x 6 x 2/3 with Trap Door Hinge ![]() | 1 x $0.75 $0.75 | ||||
![]() | Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End) ![]() | 2 x $0.38 $0.75 | ||||
![]() | Technic Brick Special 2 x 2 with Ball Socket and Axle Hole ![]() | 1 x $0.75 $0.75 | ||||
![]() | Cylinder 9 x 4 x 2 Tapered with Flat Bottom, Pin Holes ![]() | 2 x $0.38 $0.75 | ||||
![]() | Brick Arch 1 x 6 x 3 1/3 Curved Top ![]() | 2 x $0.38 $0.75 | ||||
![]() | Technic Axle and Pin Connector Angled #6 - 90° ![]() | 4 x $0.19 $0.75 | ||||
![]() | Brick Curved 3 x 1 No Studs ![]() | 8 x $0.09 $0.75 | ||||
![]() | Brick 1 x 3 ![]() | 8 x $0.09 $0.75 | ||||
![]() | Plate 2 x 4 ![]() | 8 x $0.09 $0.75 | ||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | 4 x $0.19 $0.75 | ||||
![]() | Technic Axle 8 ![]() | 4 x $0.19 $0.75 | ||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | 4 x $0.19 $0.75 | ||||
![]() | Arm Mechanical with 2 Clips [Battle Droid] ![]() | 5 x $0.15 $0.74 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 5 x $0.15 $0.74 | ||||
![]() | Arm Mechanical with 2 Clips [Battle Droid] ![]() | 5 x $0.15 $0.74 | ||||
![]() | Technic Worm Gear ![]() | 1 x $0.72 $0.72 | ||||
![]() | Plate 2 x 6 ![]() | 6 x $0.12 $0.72 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 6 x $0.12 $0.72 | ||||
![]() | Plate 1 x 6 ![]() | 6 x $0.12 $0.72 | ||||
![]() | Technic Gear Rack 1 x 4 ![]() | 2 x $0.36 $0.72 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 26 x $0.03 $0.70 | ||||
![]() | Technic Axle and Pin Connector Angled #5 - 112.5° ![]() | 4 x $0.17 $0.70 | ||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth ![]() | 4 x $0.17 $0.70 | ||||
![]() | Weapon Lance ![]() | 2 x $0.35 $0.70 | ||||
![]() | Wheel Arch, Curved Wedge 4 x 3 with 2 x 2 Opening and 4 Studs ![]() | 2 x $0.35 $0.70 | ||||
![]() | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) ![]() | 2 x $0.35 $0.70 | ||||
![]() | Brick 1 x 4 ![]() | 4 x $0.17 $0.70 | ||||
![]() | Plate 4 x 4 ![]() | 4 x $0.17 $0.70 | ||||
![]() | Technic Beam 1 x 11.5 Double Bent Thick ![]() | 4 x $0.17 $0.70 | ||||
![]() | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) ![]() | 2 x $0.35 $0.70 | ||||
![]() | Brick Round 1 x 1 with Fins, Open Stud ![]() | 3 x $0.23 $0.68 | ||||
![]() | Technic Axle Connector Double Flexible [Rubber] ![]() | 5 x $0.13 $0.67 | ||||
![]() | Technic Pin Connector Perpendicular 2 x 2 Bent ![]() | 2 x $0.34 $0.67 | ||||
![]() | Technic Brick 1 x 10 [9 Pin Holes] ![]() | 2 x $0.34 $0.67 | ||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] ![]() | 2 x $0.34 $0.67 | ||||
![]() | Projectile, Technic Competition Arrow, Liftarm Shaft with Hollow Black Rubber End ![]() | 1 x $0.66 $0.66 | ||||
![]() | Fence Spindled 1 x 4 x 2 [2 Top Studs] ![]() | 1 x $0.66 $0.66 | ||||
![]() | Projectile, Technic Competition Arrow, Liftarm Shaft with Hollow Black Rubber End ![]() | 1 x $0.66 $0.66 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 12 x $0.05 $0.64 | ||||
![]() | Plate 2 x 2 ![]() | 12 x $0.05 $0.64 | ||||
![]() | Technic Brick 1 x 10 [9 Pin Holes] ![]() | 2 x $0.32 $0.64 | ||||
![]() | Windscreen 10 x 6 x 2 Curved ![]() | 1 x $0.64 $0.64 | ||||
![]() | Technic Brick 1 x 10 [9 Pin Holes] ![]() | 2 x $0.32 $0.64 | ||||
![]() | Plate 2 x 16 ![]() | 2 x $0.32 $0.64 | ||||
![]() | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole ![]() | 2 x $0.31 $0.62 | ||||
![]() | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole ![]() | 2 x $0.31 $0.62 | ||||
![]() | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole ![]() | 2 x $0.31 $0.62 | ||||
![]() | Brick 2 x 2 x 3 ![]() | 2 x $0.31 $0.62 | ||||
![]() | Plate 2 x 4 ![]() | 5 x $0.12 $0.60 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 11 x $0.05 $0.59 | ||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | 2 x $0.30 $0.59 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 4 x $0.15 $0.59 | ||||
![]() | Brick 1 x 2 ![]() | 4 x $0.15 $0.59 | ||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | 4 x $0.15 $0.59 | ||||
![]() | Technic Beam 1 x 4 Thin ![]() | 4 x $0.15 $0.59 | ||||
![]() | Brick 1 x 2 ![]() | 4 x $0.15 $0.59 | ||||
![]() | Technic Worm Gear ![]() | 1 x $0.58 $0.58 | ||||
![]() | Brick Wedged, Curved Inverted 8 x 6 x 2 Cockpit ![]() | 1 x $0.58 $0.58 | ||||
![]() | Technic Worm Gear ![]() | 1 x $0.58 $0.58 | ||||
![]() | Technic Worm Gear ![]() | 1 x $0.58 $0.58 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 7 x $0.08 $0.56 | ||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] ![]() | 2 x $0.28 $0.56 | ||||
![]() | Technic Plate 2 x 8 [7 Holes] ![]() | 2 x $0.28 $0.56 | ||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] ![]() | 2 x $0.28 $0.56 | ||||
![]() | Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth ![]() | 2 x $0.28 $0.56 | ||||
![]() | Brick 1 x 6 ![]() | 2 x $0.28 $0.56 | ||||
![]() | Brick Sloped Inverted 45° 4 x 4 Double with 4 x 2 Recessed ![]() | 1 x $0.56 $0.56 | ||||
![]() | Wedge Plate 6 x 3 Right ![]() | 3 x $0.19 $0.56 | ||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | 6 x $0.09 $0.56 | ||||
![]() | Brick Curved 1 x 3 x 2 ![]() | 6 x $0.09 $0.56 | ||||
![]() | Technic Beam 1 x 3 Thick ![]() | 6 x $0.09 $0.56 | ||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | 6 x $0.09 $0.56 | ||||
![]() | Tap 1 x 1 with Hole in Spout ![]() | 1 x $0.55 $0.55 | ||||
![]() | Technic Brick 6 x 8 with 4 x 6 Opening ![]() | 1 x $0.55 $0.55 | ||||
![]() | Technic Beam 1 x 9 Bent (6 - 4) Thick ![]() | 4 x $0.13 $0.54 | ||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | 4 x $0.13 $0.54 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 4 x $0.13 $0.54 | ||||
![]() | Brick 2 x 3 ![]() | 4 x $0.13 $0.54 | ||||
![]() | Plate 2 x 2 ![]() | 10 x $0.05 $0.54 | ||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | 4 x $0.13 $0.54 | ||||
![]() | Brick 2 x 6 ![]() | 2 x $0.27 $0.54 | ||||
![]() | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°] ![]() | 1 x $0.54 $0.54 | ||||
![]() | Brick 2 x 6 ![]() | 2 x $0.27 $0.54 | ||||
![]() | Wheel Hard Plastic Small (22mm D. x 24mm) ![]() | 2 x $0.27 $0.54 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 8 x $0.07 $0.54 | ||||
![]() | Brick 2 x 4 ![]() | 3 x $0.17 $0.52 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 3 x $0.17 $0.52 | ||||
![]() | Brick Wedged, Curved 10 x 3 Left ![]() | 2 x $0.25 $0.51 | ||||
![]() | Brick Wedged, Curved 6 x 2 Left, Inner Ridges ![]() | 2 x $0.25 $0.51 | ||||
![]() | Brick Sloped Inverted 45° 6 x 4 Double with 4 x 4 Recessed ![]() | 1 x $0.51 $0.51 | ||||
![]() | Plate 6 x 8 ![]() | 1 x $0.51 $0.51 | ||||
![]() | Wedge Plate 6 x 3 Left ![]() | 3 x $0.16 $0.48 | ||||
![]() | Brick 1 x 2 ![]() | 6 x $0.08 $0.48 | ||||
![]() | Technic Beam 3 x 5 L-Shape Thick ![]() | 6 x $0.08 $0.48 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 6 x $0.08 $0.48 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 3 x $0.16 $0.48 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 9 x $0.05 $0.48 | ||||
![]() | Technic Axle Connector with Axle Hole ![]() | 6 x $0.08 $0.48 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 6 x $0.08 $0.48 | ||||
![]() | Technic Brick 4 x 6 with 2 x 4 Opening ![]() | 1 x $0.48 $0.48 | ||||
![]() | Tile 1 x 2 with Stylised Computer Console Print ![]() | 1 x $0.48 $0.48 | ||||
![]() | Technic Pin Connector Toggle Joint Smooth Double with 2 Pins ![]() | 1 x $0.48 $0.48 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 4 x $0.12 $0.48 | ||||
![]() | Plate 4 x 4 ![]() | 2 x $0.24 $0.48 | ||||
![]() | Brick Wedged, Curved 10 x 3 Right ![]() | 2 x $0.24 $0.48 | ||||
![]() | Technic Axle and Pin Connector Angled #5 - 112.5° ![]() | 4 x $0.12 $0.48 | ||||
![]() | Brick Sloped 45° 10 x 2 x 2 Double ![]() | 1 x $0.47 $0.47 | ||||
![]() | Plate 2 x 4 ![]() | 5 x $0.09 $0.47 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 5 x $0.09 $0.47 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 5 x $0.09 $0.47 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove ![]() | 7 x $0.07 $0.47 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 7 x $0.07 $0.47 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 17 x $0.03 $0.46 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 17 x $0.03 $0.46 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 17 x $0.03 $0.46 | ||||
![]() | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) ![]() | 2 x $0.23 $0.46 | ||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick U Clip] ![]() | 2 x $0.23 $0.46 | ||||
![]() | Brick 2 x 4 ![]() | 2 x $0.23 $0.46 | ||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | 2 x $0.23 $0.46 | ||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | 2 x $0.23 $0.46 | ||||
![]() | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) ![]() | 2 x $0.23 $0.46 | ||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | 2 x $0.23 $0.46 | ||||
![]() | Plate 6 x 10 ![]() | 1 x $0.46 $0.46 | ||||
![]() | Brick 1 x 4 ![]() | 3 x $0.15 $0.44 | ||||
![]() | Brick 1 x 4 ![]() | 3 x $0.15 $0.44 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 11 x $0.04 $0.44 | ||||
![]() | Brick 2 x 2 Corner ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 4 x $0.11 $0.43 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 16 x $0.03 $0.43 | ||||
![]() | Technic Beam 1 x 2 Thin ![]() | 4 x $0.11 $0.43 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 8 x $0.05 $0.43 | ||||
![]() | Brick 2 x 8 ![]() | 1 x $0.43 $0.43 | ||||
![]() | Technic Axle 3 with Stud ![]() | 1 x $0.43 $0.43 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 1 x $0.43 $0.43 | ||||
![]() | Technic Axle 3 with Stud ![]() | 1 x $0.43 $0.43 | ||||
![]() | Equipment Goblet / Glass ![]() | 2 x $0.21 $0.43 | ||||
![]() | Plate 2 x 12 ![]() | 2 x $0.21 $0.43 | ||||
![]() | Hinge Plate 3 x 4 Locking Dual 2 Finger, 9 Teeth ![]() | 2 x $0.21 $0.43 | ||||
![]() | Equipment Goblet / Glass ![]() | 2 x $0.21 $0.43 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 5 x $0.08 $0.40 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 15 x $0.03 $0.40 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 5 x $0.08 $0.40 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 15 x $0.03 $0.40 | ||||
![]() | Plate 1 x 8 ![]() | 3 x $0.13 $0.40 | ||||
![]() | Plate 1 x 6 ![]() | 3 x $0.13 $0.40 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 5 x $0.08 $0.40 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 15 x $0.03 $0.40 | ||||
![]() | Technic Pin Double with Axle Hole ![]() | 2 x $0.20 $0.40 | ||||
![]() | Technic Beam 1 x 9 Thick ![]() | 2 x $0.20 $0.40 | ||||
![]() | Hinge Brick 1 x 2 Top Plate Thin ![]() | 2 x $0.20 $0.40 | ||||
![]() | Plate 2 x 16 ![]() | 1 x $0.40 $0.40 | ||||
![]() | Brick Sloped 65° 2 x 2 x 2 with Bottom Tube ![]() | 2 x $0.20 $0.40 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 2 x $0.20 $0.40 | ||||
![]() | Technic Beam 1 x 9 Thick ![]() | 2 x $0.20 $0.40 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 6 x $0.07 $0.40 | ||||
![]() | Plate 1 x 2 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Plate 1 x 2 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 6 x $0.07 $0.40 | ||||
![]() | Plate 2 x 3 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove ![]() | 6 x $0.07 $0.40 | ||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth ![]() | 6 x $0.07 $0.40 | ||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | 6 x $0.07 $0.40 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] ![]() | 10 x $0.04 $0.40 | ||||
![]() | Technic Brick Special 2 x 2 with Solid Ball and Axle Hole ![]() | 1 x $0.39 $0.39 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 7 x $0.05 $0.38 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 14 x $0.03 $0.38 | ||||
![]() | Cylinder 9 x 4 x 2 Tapered with Flat Bottom, Pin Holes ![]() | 1 x $0.38 $0.38 | ||||
![]() | Brick Wedged, Angled 4 x 2 Right ![]() | 1 x $0.38 $0.38 | ||||
![]() | Brick 1 x 2 x 2 with Inside Axle Holder ![]() | 1 x $0.38 $0.38 | ||||
![]() | Technic Axle 8 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Wedge Plate 6 x 3 Right ![]() | 2 x $0.19 $0.38 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Curved 6 x 1 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Technic Beam 1 x 7 Thick ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Curved Inverted 6 x 1 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Plate Special 2 x 8 with Door Rail ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Curved 6 x 1 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Brick Sloped 45° 2 x 2 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Plate 1 x 8 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 4 x $0.09 $0.38 | ||||
![]() | Seat / Chair 2 x 2 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Technic Axle 8 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Plate 2 x 6 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick 1 x 1 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Seat / Chair 2 x 2 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Brick Curved 6 x 1 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Sloped 33° 3 x 1 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Special 1 x 1 with Studs on 2 Sides ![]() | 2 x $0.19 $0.38 | ||||
![]() | Technic Beam 1 x 11 Thick ![]() | 2 x $0.19 $0.38 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Brick Curved 6 x 1 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Brick Special 1 x 1 with Studs on 2 Sides ![]() | 2 x $0.19 $0.38 | ||||
![]() | Brick Sloped 33° 3 x 1 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate 4 x 8 ![]() | 1 x $0.36 $0.36 | ||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate 4 x 8 ![]() | 1 x $0.36 $0.36 | ||||
![]() | Plate 4 x 8 ![]() | 1 x $0.36 $0.36 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 9 x $0.04 $0.36 | ||||
![]() | Brick Wedged, Angled 3 x 2 Right ![]() | 1 x $0.35 $0.35 | ||||
![]() | Hinge Brick 1 x 2 Top Plate Thin ![]() | 2 x $0.17 $0.35 | ||||
![]() | Brick 1 x 4 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Brick Sloped 45° 2 x 2 Double Convex ![]() | 2 x $0.17 $0.35 | ||||
![]() | Tile 1 x 2 with Joystick and Vehicle Control Panel Print ![]() | 1 x $0.35 $0.35 | ||||
![]() | Plate 1 x 8 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Brick Arch 1 x 6 x 2 Curved Top ![]() | 1 x $0.34 $0.34 | ||||
![]() | Brick Wedged, Angled 3 x 2 Left ![]() | 1 x $0.34 $0.34 | ||||
![]() | Technic Axle Connector Ridged [with x Hole x Orientation] ![]() | 1 x $0.34 $0.34 | ||||
![]() | Tile 1 x 4 with Train Controls Print ![]() | 1 x $0.34 $0.34 | ||||
![]() | Plate 1 x 2 ![]() | 5 x $0.07 $0.34 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 5 x $0.07 $0.34 | ||||
![]() | Wedge Plate 6 x 3 Left ![]() | 2 x $0.16 $0.32 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | 4 x $0.08 $0.32 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 2 x $0.16 $0.32 | ||||
![]() | Plate 4 x 6 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick Sloped Inverted 45° 6 x 1 Double with 1 x 4 Recessed ![]() | 4 x $0.08 $0.32 | ||||
![]() | Technic Axle Connector with Axle Hole ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate 1 x 4 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate 1 x 4 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate 1 x 10 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 6 x $0.05 $0.32 | ||||
![]() | Flag 2 x 2 Trapezoid with Flat Area between Clips ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Sloped 45° 2 x 2 ![]() | 3 x $0.11 $0.32 | ||||
![]() | Plate 1 x 10 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Axle 6 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Technic Beam 3 x 5 L-Shape Thick ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate 1 x 10 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate 1 x 3 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 12 x $0.03 $0.32 | ||||
![]() | Brick Curved 3 x 1 No Studs ![]() | 2 x $0.16 $0.32 | ||||
![]() | Plate 2 x 2 ![]() | 6 x $0.05 $0.32 | ||||
![]() | Bar 1 x 3 [Clip / Anti-Stud] ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick 2 x 3 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Bracket 5 x 2 x 2 1/3 with Holes, Smooth Bottom ![]() | 1 x $0.32 $0.32 | ||||
![]() | Brick 1 x 12 ![]() | 1 x $0.32 $0.32 | ||||
![]() | Bracket 5 x 2 x 2 1/3 with Holes, Smooth Bottom ![]() | 1 x $0.32 $0.32 | ||||
![]() | Hinge Brick 1 x 6 Locking with 1 Finger Vertical End and 2 Fingers Vertical End, 9 Teeth ![]() | 1 x $0.32 $0.32 | ||||
![]() | Plate 4 x 8 ![]() | 1 x $0.32 $0.32 | ||||
![]() | Plate 4 x 8 ![]() | 1 x $0.32 $0.32 | ||||
![]() | Brick 1 x 8 ![]() | 1 x $0.32 $0.32 | ||||
![]() | Wedge Plate 4 x 4 with 2 x 2 Cutout ![]() | 8 x $0.04 $0.32 | ||||
![]() | Plate 4 x 6 ![]() | 1 x $0.31 $0.31 | ||||
![]() | Brick Wedged, Sloped 45° 4 x 2 Left ![]() | 1 x $0.31 $0.31 | ||||
![]() | Brick Wedged, Sloped 45° 4 x 2 Right ![]() | 1 x $0.31 $0.31 | ||||
![]() | Brick Wedged, Sloped 45° 4 x 2 Left ![]() | 1 x $0.31 $0.31 | ||||
![]() | Brick Wedged, Sloped 45° 4 x 2 Right ![]() | 1 x $0.31 $0.31 | ||||
![]() | Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges] ![]() | 1 x $0.31 $0.31 | ||||
![]() | Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges] ![]() | 1 x $0.31 $0.31 | ||||
![]() | Plate 4 x 6 ![]() | 1 x $0.31 $0.31 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 11 x $0.03 $0.30 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 11 x $0.03 $0.30 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Beam 1 x 11.5 Double Bent Thick ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick Wedged, Angled 4 x 2 Left ![]() | 1 x $0.30 $0.30 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Axle 10 ![]() | 1 x $0.30 $0.30 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Beam 1 x 11.5 Double Bent Thick ![]() | 2 x $0.15 $0.30 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Beam 3 x 3 L-Shape Thin ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick Sloped 75° 2 x 1 x 3 with Hollow Stud ![]() | 2 x $0.15 $0.30 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 2 x $0.15 $0.30 | ||||
![]() | Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 2 x $0.15 $0.30 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick 1 x 4 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Beam 3 x 3 L-Shape Thin ![]() | 2 x $0.15 $0.30 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Beam 1 x 3 Thin ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick Wedged, Curved 6 x 2 Right, Inner Ridges ![]() | 2 x $0.15 $0.30 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth ![]() | 1 x $0.28 $0.28 | ||||
![]() | Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth ![]() | 1 x $0.28 $0.28 | ||||
![]() | Large Figure Skeletal, Torso, Lower Section (Rahkshi) ![]() | 1 x $0.28 $0.28 | ||||
![]() | Brick 1 x 6 ![]() | 1 x $0.28 $0.28 | ||||
![]() | Technic Panel Fairing # 6 Small Short, Large Hole, Side B ![]() | 1 x $0.28 $0.28 | ||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | 3 x $0.09 $0.28 | ||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | 3 x $0.09 $0.28 | ||||
![]() | Technic Bush ![]() | 7 x $0.04 $0.28 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | 7 x $0.04 $0.28 | ||||
![]() | Technic Axle 4 ![]() | 7 x $0.04 $0.28 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate Special 2 x 2 with Grills ![]() | 2 x $0.13 $0.27 | ||||
![]() | Dish 4 x 4 Inverted [Radar] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Axle Connector Double Flexible [Rubber] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 10 x $0.03 $0.27 | ||||
![]() | Plate Special 2 x 2 with Grills ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 1 x 8 ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 2 x 4 ![]() | 5 x $0.05 $0.27 | ||||
![]() | Brick 2 x 3 ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 10 x $0.03 $0.27 | ||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate Special 2 x 2 with Grills ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Beam 1 x 11.5 Double Bent Thick ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 5 x $0.05 $0.27 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 10 x $0.03 $0.27 | ||||
![]() | Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Beam 1 x 7 Bent (4 - 4) Thick ![]() | 2 x $0.13 $0.27 | ||||
![]() | Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Axle 2 Notched ![]() | 10 x $0.03 $0.27 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 2 x 4 ![]() | 5 x $0.05 $0.27 | ||||
![]() | Technic Axle Connector Double Flexible [Rubber] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate Special 2 x 2 with Grills ![]() | 2 x $0.13 $0.27 | ||||
![]() | Brick 2 x 6 ![]() | 1 x $0.27 $0.27 | ||||
![]() | Brick 2 x 6 ![]() | 1 x $0.27 $0.27 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 1 x 4 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Horizontal End ![]() | 4 x $0.07 $0.27 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick Wedged, Curved 6 x 2 Left, Inner Ridges ![]() | 1 x $0.25 $0.25 | ||||
![]() | Brick Wedged, Curved 10 x 3 Left ![]() | 1 x $0.25 $0.25 | ||||
![]() | Brick Wedged, Curved 6 x 2 Left, Inner Ridges ![]() | 1 x $0.25 $0.25 | ||||
![]() | Brick Wedged, Curved 10 x 3 Left ![]() | 1 x $0.25 $0.25 | ||||
![]() | Plate 2 x 12 ![]() | 1 x $0.25 $0.25 | ||||
![]() | Brick Wedged, Curved 10 x 3 Left ![]() | 1 x $0.25 $0.25 | ||||
![]() | Plate 6 x 6 ![]() | 1 x $0.25 $0.25 | ||||
![]() | Technic Axle Connector Ridged [with x Hole x Orientation] ![]() | 1 x $0.25 $0.25 | ||||
![]() | Brick Wedged, Curved 6 x 2 Left, Inner Ridges ![]() | 1 x $0.25 $0.25 | ||||
![]() | Technic Axle 6 ![]() | 3 x $0.08 $0.24 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 3 x $0.08 $0.24 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 3 x $0.08 $0.24 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 3 x $0.08 $0.24 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.08 $0.24 | ||||
![]() | Plate 1 x 2 ![]() | 9 x $0.03 $0.24 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Wedged, Curved 10 x 3 Right ![]() | 1 x $0.24 $0.24 | ||||
![]() | Plate Round Corner 3 x 3 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Round Corner 3 x 3 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Wedged, Curved 10 x 3 Right ![]() | 1 x $0.24 $0.24 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Wedged, Curved 10 x 3 Right ![]() | 1 x $0.24 $0.24 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Curved 6 x 1 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Round 2 x 2 x 1 2/3 Dome Top, Blocked Open Stud ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Sloped 45° 2 x 2 with Radar Screen Print ![]() | 1 x $0.24 $0.24 | ||||
![]() | Brick Sloped 45° 2 x 4 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Technic Pin Double with Axle Hole ![]() | 2 x $0.12 $0.24 | ||||
![]() | Dish 3 x 3 Inverted [Radar] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Bar 1L with Clip ![]() | 6 x $0.04 $0.24 | ||||
![]() | Technic Axle and Pin Connector Perpendicular ![]() | 6 x $0.04 $0.24 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 6 x $0.04 $0.24 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 6 x $0.04 $0.24 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | 6 x $0.04 $0.24 | ||||
![]() | Brick 2 x 6 ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.23 $0.23 | ||||
![]() | Brick 2 x 6 ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.23 $0.23 | ||||
![]() | Animal / Creature Accessory, Horse Hitching, 1 x 2 Plate and 2 x 2 Plate [Studded] ![]() | 1 x $0.23 $0.23 | ||||
![]() | Tile 1 x 8 with Groove ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 4 x $0.05 $0.21 | ||||
![]() | Tail Shuttle ![]() | 2 x $0.11 $0.21 | ||||
![]() | Wedge Plate 3 x 2 Right ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate Special 2 x 2 with Bar Frame Octagonal ![]() | 2 x $0.11 $0.21 | ||||
![]() | Wedge Plate 3 x 2 Left ![]() | 2 x $0.11 $0.21 | ||||
![]() | Technic Axle 2 Notched ![]() | 8 x $0.03 $0.21 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate 2 x 2 ![]() | 4 x $0.05 $0.21 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 8 x $0.03 $0.21 | ||||
![]() | Tail Shuttle ![]() | 2 x $0.11 $0.21 | ||||
![]() | Wedge Plate 3 x 3 Cut Corner ![]() | 4 x $0.05 $0.21 | ||||
![]() | Wedge Plate 12 x 3 Left ![]() | 2 x $0.11 $0.21 | ||||
![]() | Wedge Plate 12 x 3 Right ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 8 x $0.03 $0.21 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 4 x $0.05 $0.21 | ||||
![]() | Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 9 Teeth ![]() | 4 x $0.05 $0.21 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 4 x $0.05 $0.21 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.05 $0.21 | ||||
![]() | Technic Axle 3 ![]() | 8 x $0.03 $0.21 | ||||
![]() | Wedge Plate 4 x 2 Left ![]() | 2 x $0.11 $0.21 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 2 x $0.11 $0.21 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 2 x $0.11 $0.21 | ||||
![]() | Hinge Plate 1 x 4 Locking Dual 1 Finger ![]() | 1 x $0.21 $0.21 | ||||
![]() | Brick Wedged, Sloped 45° 4 x 2 Left ![]() | 1 x $0.20 $0.20 | ||||
![]() | Brick 2 x 6 ![]() | 1 x $0.20 $0.20 | ||||
![]() | Brick Wedged, Angled 4 x 2 Right ![]() | 1 x $0.20 $0.20 | ||||
![]() | Plate 1 x 4 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 3 x $0.07 $0.20 | ||||
![]() | Plate 1 x 2 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Tile 1 x 1 with Groove ![]() | 3 x $0.07 $0.20 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove ![]() | 3 x $0.07 $0.20 | ||||
![]() | Plate 1 x 4 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Plate 1 x 2 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End ![]() | 5 x $0.04 $0.20 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 5 x $0.04 $0.20 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 5 x $0.04 $0.20 | ||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth ![]() | 5 x $0.04 $0.20 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 5 x $0.04 $0.20 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 5 x $0.04 $0.20 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 7 x $0.03 $0.19 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 7 x $0.03 $0.19 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 7 x $0.03 $0.19 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 1 x $0.19 $0.19 | ||||
![]() | Brick 2 x 4 ![]() | 1 x $0.19 $0.19 | ||||
![]() | Brick 1 x 1 ![]() | 1 x $0.19 $0.19 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Pin Connector Hub Perpendicular 3L with 4 Pins ![]() | 2 x $0.09 $0.19 | ||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 2 x $0.09 $0.19 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.19 $0.19 | ||||
![]() | Brick Wedged, Angled 3 x 2 Left ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Wedged, Angled 3 x 2 Right ![]() | 2 x $0.09 $0.19 | ||||
![]() | Pneumatic T-Piece (T Bar) [New Style] ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 1 x $0.19 $0.19 | ||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Sloped 45° 2 x 1 Double / Inverted with Hollow Bottom ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Wedged, Curved 6 x 2 Right, Inner Ridges ![]() | 1 x $0.19 $0.19 | ||||
![]() | Panel 1 x 2 x 1 [Square Corners] ![]() | 1 x $0.19 $0.19 | ||||
![]() | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth ![]() | 2 x $0.09 $0.19 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick 2 x 4 ![]() | 1 x $0.19 $0.19 | ||||
![]() | Turntable 2 x 2 Plate, Base ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | 2 x $0.09 $0.19 | ||||
![]() | Panel 1 x 2 x 1 [Square Corners] ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate 1 x 6 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Beam 1 x 9 Bent (6 - 4) Thick ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate Special 6 x 8 Trap Door Frame Horizontal ![]() | 1 x $0.19 $0.19 | ||||
![]() | Tile 1 x 2 with Red 82, Yellow and White Gauges Print ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Panel 1 x 2 x 1 [Square Corners] ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 1 x 6 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Tooth 1 x 3 with Axle Hole [Rounded Underside] ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Panel Fairing # 5 Small Short, Large Hole, Side A ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate 2 x 2 Corner ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Sloped 33° 3 x 2 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick 2 x 4 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick Wedged, Curved 4 x 4 No Top Studs ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick Special 1 x 2 with Studs on 2 Sides ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges ![]() | 1 x $0.17 $0.17 | ||||
![]() | Plate 4 x 4 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 6 x $0.03 $0.16 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.16 $0.16 | ||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 6 x $0.03 $0.16 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.08 $0.16 | ||||
![]() | Wedge Plate 4 x 6 Cut Corners ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 3 x $0.05 $0.16 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 3 x $0.05 $0.16 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 4 ![]() | 3 x $0.05 $0.16 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Wedged, Sloped 45° 4 x 2 Right ![]() | 1 x $0.16 $0.16 | ||||
![]() | Wedge Plate 4 x 2 Left ![]() | 3 x $0.05 $0.16 | ||||
![]() | Tile 1 x 1 with Groove ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 3 x $0.05 $0.16 | ||||
![]() | Flag 2 x 2 Trapezoid with Flat Area between Clips ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick 1 x 1 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 6 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 3 x $0.05 $0.16 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 10 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Plate 2 x 8 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Brick Wedged, Angled 4 x 2 Left ![]() | 1 x $0.16 $0.16 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Special 1 x 4 with Groove ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick 2 x 3 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Plate 2 x 8 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Brick Sloped Inverted 34° 3 x 1 with Internal Stopper ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Axle and Pin Connector Angled #4 - 135° ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 3 x $0.05 $0.16 | ||||
![]() | Technic Axle 6 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick 2 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Axle Connector with Axle Hole ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick Special 1 x 2 with Handle ![]() | 4 x $0.04 $0.16 | ||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Horizontal End ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Axle 5 ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick Wedged, Curved 6 x 2 Right, Inner Ridges ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick 2 x 3 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Wedge Plate 6 x 12 Right ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Wedged, Curved 6 x 2 Right, Inner Ridges ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Sloped 45° 2 x 2 with Green Radar, Green/Red Buttons and Disk Slot Print ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Wedged, Curved 6 x 2 Right, Inner Ridges ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Curved 2 x 2 with Lip, No Studs ![]() | 1 x $0.15 $0.15 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 1 x $0.15 $0.15 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.15 $0.15 | ||||
![]() | Technic Axle Connector Double Flexible [Rubber] ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 5 x $0.03 $0.13 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 5 x $0.03 $0.13 | ||||
![]() | Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Wedged, Sloped 4 x 2 Triple Right ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 4 x 4 Corner ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 5 x $0.03 $0.13 | ||||
![]() | Wedge Plate 6 x 12 Left ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Axle 3 ![]() | 5 x $0.03 $0.13 | ||||
![]() | Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate Special 2 x 2 with Grills ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Wedged, Curved 6 x 2 Left, Inner Ridges ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Axle and Pin Connector Angled #3 - 157.5° ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Axle Connector Double Flexible [Rubber] ![]() | 1 x $0.13 $0.13 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Wedged, Curved Triple 4 x 6 x 2/3 with 4 Studs ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 1 x 2 ![]() | 5 x $0.03 $0.13 | ||||
![]() | Plate 1 x 6 ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 2 x $0.07 $0.13 | ||||
![]() | Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Axle 7 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate 2 x 2 Corner ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 6 x 6 Cut Corner ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Beam 2 x 4 L-Shape Thick ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 6 x 6 Cut Corner ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate Special 3 x 2 with Rounded End, Hole ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | 2 x $0.07 $0.13 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Axle 7 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] ![]() | 2 x $0.07 $0.13 | ||||
![]() | Cone 1 x 1 [No Top Groove] ![]() | 1 x $0.12 $0.12 | ||||
![]() | Brick Wedged, Sloped 4 x 2 Triple Left ![]() | 1 x $0.12 $0.12 | ||||
![]() | Equipment Binoculars ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.12 $0.12 | ||||
![]() | Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | 1 x $0.12 $0.12 | ||||
![]() | Brick Round 2 x 2 x 1 2/3 Dome Top, Blocked Open Stud ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.12 $0.12 | ||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | 1 x $0.12 $0.12 | ||||
![]() | Cone 2 x 2 x 2, Open Stud ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.12 $0.12 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Technic Axle and Pin Connector Angled #5 - 112.5° ![]() | 1 x $0.12 $0.12 | ||||
![]() | Technic Bush ![]() | 3 x $0.04 $0.12 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 3 x $0.04 $0.12 | ||||
![]() | Brick Special 2 x 4, with 2 x 2 Brick with Top Pin and 1 x 2 Side Plates ![]() | 3 x $0.04 $0.12 | ||||
![]() | Technic Bush ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 3 x $0.04 $0.12 | ||||
![]() | Technic Bush ![]() | 3 x $0.04 $0.12 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 3 x $0.04 $0.12 | ||||
![]() | Lever Small Base with Black Lever ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 3 x $0.04 $0.12 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Wedged 3 x 3 Cut Corner ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Bar 1 x 4 x 2 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick 2 x 2 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole [X Opening] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | 2 x $0.05 $0.11 | ||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 1 x 1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Wedged, Curved Inverted 6 x 4 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 4 x $0.03 $0.11 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 4 x $0.03 $0.11 | ||||
![]() | Brick Wedged 3 x 3 Cut Corner ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 4 x $0.03 $0.11 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Special 1 x 2 with Pin ![]() | 2 x $0.05 $0.11 | ||||
![]() | Bar 1 x 4 x 2 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Technic Beam 1 x 7 Thick ![]() | 1 x $0.11 $0.11 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 4 x $0.03 $0.11 | ||||
![]() | Wedge Plate 4 x 2 Left ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle 2 Notched ![]() | 4 x $0.03 $0.11 | ||||
![]() | Turntable 2 x 2 Plate - Top ![]() | 2 x $0.05 $0.11 | ||||
![]() | Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole, 9 Teeth ![]() | 2 x $0.05 $0.11 | ||||
![]() | Wedge Plate 12 x 3 Left ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Sloped Inverted 45° 2 x 1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Bar 1 x 4 x 2 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | 2 x $0.05 $0.11 | ||||
![]() | Wedge Plate 12 x 3 Right ![]() | 1 x $0.11 $0.11 | ||||
![]() | Panel 1 x 4 x 1 with Rounded Corners [Thick Wall] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle 2 Notched ![]() | 4 x $0.03 $0.11 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 4 x $0.03 $0.11 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 9 Teeth ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Sloped 33° 3 x 1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick 2 x 2 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 1 x $0.09 $0.09 | ||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Arch 1 x 4 x 2 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Wedged, Angled 3 x 2 Left ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | 1 x $0.09 $0.09 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 1 x 6 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Beam 1 x 3 Thick ![]() | 1 x $0.09 $0.09 | ||||
![]() | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Arch 1 x 4 x 2 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Wedged, Angled 3 x 2 Right ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Wedged, Angled 3 x 2 Left ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 3 x $0.03 $0.08 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick 2 x 2 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Rock 1 x 1 Jewel / Gem 24 Facet ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick Sloped 33° 3 x 2 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Lever Small Base with Black Lever ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 3 x $0.03 $0.08 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tool Jackhammer / Motor Hammer ![]() | 1 x $0.08 $0.08 | ||||
![]() | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 3 x $0.03 $0.08 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On Top ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 3 x $0.03 $0.08 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | 3 x $0.03 $0.08 | ||||
![]() | Brick 1 x 2 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 1 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small ![]() | 3 x $0.03 $0.08 | ||||
![]() | Lever Small Base with Black Lever ![]() | 3 x $0.03 $0.08 | ||||
![]() | Technic Axle 6 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Beam 1 x 9 Bent (7 - 3) Thick ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Beam 1 x 2 with Ball Joint Angled ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 1 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 3 x $0.03 $0.08 | ||||
![]() | Wedge Plate 3 x 2 Left ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.08 $0.08 | ||||
![]() | Wedge Plate 3 x 2 Right ![]() | 1 x $0.08 $0.08 | ||||
![]() | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 3 x $0.03 $0.08 | ||||
![]() | Lever Small Base with Black Lever ![]() | 3 x $0.03 $0.08 | ||||
![]() | Technic Axle 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Wedge Plate 4 x 4 with 2 x 2 Cutout ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round Corner 4 x 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole, 9 Teeth ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle 5 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 2 x $0.04 $0.08 | ||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Special 2 x 2 with 2 Pins and Axle Hole ![]() | 2 x $0.04 $0.08 | ||||
![]() | Handlebars ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round Corner 4 x 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 2 x 2 with 2 Pin Holes ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Special 1 x 2 with Handle ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Disc 3 x 3 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 3 x 6 Cut Corners ![]() | 1 x $0.07 $0.07 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove ![]() | 1 x $0.07 $0.07 | ||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 3 x 2 Left ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 3 x 6 Cut Corners ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 3 x 2 Right ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 4 x 4 with 2 x 2 Cutout ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Tool Chainsaw Blade ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 3 x 4 with Stud Notches ![]() | 1 x $0.07 $0.07 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 1 x $0.07 $0.07 | ||||
![]() | Wedge Plate 4 x 4 with 2 x 2 Cutout ![]() | 1 x $0.07 $0.07 | ||||
![]() | Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings ![]() | 1 x $0.07 $0.07 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | 1 x $0.05 $0.05 | ||||
![]() | Lever Small Base with Black Lever ![]() | 2 x $0.03 $0.05 | ||||
![]() | Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole, 9 Teeth ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 2 x $0.03 $0.05 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick Special 1 x 2 with Pin ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | 1 x $0.05 $0.05 | ||||
![]() | Rubber Band / Belt Holder 2 x 6 x 2 1/3 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick 1 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole [X Opening] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 2 x $0.03 $0.05 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 2 x $0.03 $0.05 | ||||
![]() | Turntable 2 x 2 Plate, Base ![]() | 1 x $0.05 $0.05 | ||||
![]() | Turntable 2 x 2 Plate - Top ![]() | 1 x $0.05 $0.05 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 2 x $0.03 $0.05 | ||||
![]() | Wedge Plate 4 x 2 Left ![]() | 1 x $0.05 $0.05 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 2 x $0.03 $0.05 | ||||
![]() | Rubber Band / Belt Holder 2 x 6 x 2 1/3 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Beam 2 x 4 L-Shape Thick ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Axle 3 ![]() | 2 x $0.03 $0.05 | ||||
![]() | Brick Special 1 x 2 with Pin ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | 1 x $0.05 $0.05 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 1 x $0.05 $0.05 | ||||
![]() | Wedge Plate 4 x 2 Left ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 2 x $0.03 $0.05 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 2 x $0.03 $0.05 | ||||
![]() | Wedge Plate 3 x 6 Cut Corners ![]() | 1 x $0.05 $0.05 | ||||
![]() | Tail Shuttle - Small ![]() | 1 x $0.04 $0.04 | ||||
![]() | Mudguard 2 x 4 with Molded Headlights ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle Pin without Friction Ridges Lengthwise ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle Pin without Friction Ridges Lengthwise ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tail Shuttle - Small ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End ![]() | 1 x $0.04 $0.04 | ||||
![]() | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle 4 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate 1 x 2 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 1 x $0.03 $0.03 | ||||
![]() | Plate Special 1 x 4 Offset with Bar Holes ![]() | 1 x $0.03 $0.03 | ||||
![]() | Plate 1 x 2 ![]() | 1 x $0.03 $0.03 | ||||
![]() | Tile Special 2 x 2 with Top Pin ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Axle 2 Notched ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Axle 5.5 with Stop [Rounded Short End] ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Axle 5.5 with Stop [Rounded Short End] ![]() | 1 x $0.03 $0.03 | ||||
![]() | Tile Special 1 x 2 with Handle ![]() | 1 x $0.03 $0.03 | ||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Axle 3 ![]() | 1 x $0.03 $0.03 | ||||
Missing pricing information on the following items.
Minifigures included in set K7699-1.
| Minifigure | Quantity | Value | |
|---|---|---|---|
![]() | Martian fig-006974, mm001, BOID 393105 | 21 | $3.06 |
![]() | Mars Astronaut, Orange Sunglasses, Stubble fig-006976, mm007, BOID 199858 | 3 | - |
![]() | Mars Astronaut, Stubble, Printed Hair fig-006980, mm003, BOID 815233 | 3 | - |
![]() | Mars Astronaut, Stubble, Printed Hair over Eyes fig-006981, mm008, BOID 484706 | 3 | - |
![]() | Mars Astronaut, Printed Hair fig-006979, mm009, BOID 77376 | 2 | - |
![]() | Mars Astronaut, Sunglasses fig-006978, mm004, BOID 754068 | 2 | - |
![]() | Mars Astronaut, Balaclava fig-006982, mm002, BOID 21600 | 1 | - |
![]() | Mars Astronaut, Cheek Lines fig-006975, mm012, BOID 287833 | 1 | - |
| Total minifigure value: | $64.24 | ||
Compare the value of buying Complete Mars Mission Collection as a complete set versus the total value of all parts individually.
| Value Breakdown | |
| Parts value | $898.16 |
| Minifigure value | $64.24 |
| Total inventory value | $962.40 |
BrickLink 
Ratio: what the parts sell for, over what the set sells for. Above 1× the parts are worth more than the set.
Brick Owl 
Find the cheapest offers for set K7699-1 from sellers on secondary marketplaces like Brick Owl and eBay. As an eBay Partner Network Affiliate and Brick Owl Affiliate, I earn from qualifying purchases.
Brick Owl and eBay marketplace offers.
BrickLink history of 0 sales with 0 total item quantity. Item condition: New.
No sale history available.
![Bright Green Technic Rubber Belt Medium [24mm ID] [Round Cross Section]](https://cdn.rebrickable.com/media/parts/ldraw/10/85544.png)


![Light Bluish Gray Bar 6.6L with Stop Ring [Umbrella Stand]](https://api.brickonomics.net/assets/parts/4095/71/lego_element_4533908_photoreal_00001.webp)









![Black Technic Pin Connector Round [No Slot]](https://api.brickonomics.net/assets/parts/75535/0/bricklink.webp)

![White Technic Brick 1 x 14 [13 Pin Holes]](https://api.brickonomics.net/assets/parts/32018/15/lego_element_4112515_photoreal_00001.webp)



![White Cone 1 x 1 [No Top Groove]](https://api.brickonomics.net/assets/parts/4589/15/bricklink.webp)



![White Brick Sloped 75° 2 x 2 x 3 [Hollow Studs]](https://api.brickonomics.net/assets/parts/3684/15/bricklink.webp)

![Black Technic Beam Triangle Thin [Type I]](https://api.brickonomics.net/assets/parts/2905/0/bricklink.webp)
![Orange Technic Tread Large [36 Links]](https://api.brickonomics.net/assets/parts/53992/25/bricklink.webp)
![Black Technic Brick 1 x 16 [15 Pin Holes]](https://api.brickonomics.net/assets/parts/3703/0/lego_element_370326_photoreal_00001.webp)





![White Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://api.brickonomics.net/assets/parts/4285b/15/lego_element_6024943_photoreal_00001.webp)

![Trans-Neon Green Cone 1 x 1 [No Top Groove]](https://api.brickonomics.net/assets/parts/4589/42/bricklink.webp)












![Dark Bluish Gray Technic Axle Connector Ridged [with x Hole x Orientation]](https://api.brickonomics.net/assets/parts/6538b/72/bricklink.webp)


![Light Bluish Gray Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://api.brickonomics.net/assets/parts/6019/71/lego_element_4211518_photoreal_00001.webp)
![White Technic Brick 1 x 16 [15 Pin Holes]](https://api.brickonomics.net/assets/parts/3703/15/lego_element_4508661_photoreal_00001.webp)

![Black Technic Brick 1 x 14 [13 Pin Holes]](https://api.brickonomics.net/assets/parts/32018/0/lego_element_4107558_photoreal_00001.webp)

![Trans-Neon Green Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://api.brickonomics.net/assets/parts/4285b/42/lego_element_4508052_photoreal_00001.webp)








![Trans-Dark Blue Cone 1 x 1 [No Top Groove]](https://api.brickonomics.net/assets/parts/4589/33/bricklink.webp)



![Dark Bluish Gray Weapon Gun / Torch (Space) [with Grooves]](https://api.brickonomics.net/assets/parts/3959/72/lego_element_4262540_photoreal_00001.webp)


![Black Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://api.brickonomics.net/assets/parts/4085c/0/lego_element_408526_photoreal_00001.webp)






![Black Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]](https://api.brickonomics.net/assets/parts/57796/0/lego_element_4518409_photoreal_00001.webp)




![Trans-Red Cone 1 x 1 [No Top Groove]](https://api.brickonomics.net/assets/parts/4589/36/bricklink.webp)











![Light Bluish Gray Technic Brick 1 x 12 [11 Pin Holes]](https://api.brickonomics.net/assets/parts/3895/71/lego_element_4211860_photoreal_00001.webp)
![Dark Bluish Gray Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://api.brickonomics.net/assets/parts/6019/72/lego_element_4216973_photoreal_00001.webp)


![Black Technic Brick 1 x 4 [3 Pin Holes]](https://api.brickonomics.net/assets/parts/3701/0/lego_element_370126_photoreal_00001.webp)





![Light Bluish Gray Plate Special 4 x 4, Studs on One Edge Plain]](https://api.brickonomics.net/assets/parts/6179/71/lego_element_4211837_photoreal_00001.webp)




![Black Dish 3 x 3 Inverted [Radar]](https://api.brickonomics.net/assets/parts/43898/0/lego_element_4180087_photoreal_00001.webp)

![Dark Bluish Gray Technic Brick 1 x 14 [13 Pin Holes]](https://api.brickonomics.net/assets/parts/32018/72/lego_element_4211137_photoreal_00001.webp)


![Black Tile Special 2 x 3 with 2 Clips [Thick U Clips]](https://api.brickonomics.net/assets/parts/30350c/0/bricklink.webp)


![White Technic Brick 1 x 4 [3 Pin Holes]](https://api.brickonomics.net/assets/parts/3701/15/lego_element_370101_photoreal_00001.webp)

![Black Minifig Head [Plain] [Blocked Open Stud]](https://api.brickonomics.net/assets/parts/3626b/0/bricklink.webp)




![Black Technic Axle Connector Ridged [with x Hole x Orientation]](https://api.brickonomics.net/assets/parts/6538b/0/bricklink.webp)










![Light Bluish Gray Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://api.brickonomics.net/assets/parts/73983/71/lego_element_6102769_photoreal_00001.webp)

![Black Arm Mechanical with 2 Clips [Battle Droid]](https://api.brickonomics.net/assets/parts/30377/0/lego_element_6330086_photoreal_00001.webp)
![Black Technic Brick 1 x 6 [5 Pin Holes]](https://api.brickonomics.net/assets/parts/3894/0/lego_element_389426_photoreal_00001.webp)













![Black Technic Axle Connector Double Flexible [Rubber]](https://api.brickonomics.net/assets/parts/45590/0/lego_element_4198367_photoreal_00001.webp)

![Black Technic Brick 1 x 10 [9 Pin Holes]](https://api.brickonomics.net/assets/parts/2730/0/lego_element_273026_photoreal_00001.webp)

![Black Fence Spindled 1 x 4 x 2 [2 Top Studs]](https://api.brickonomics.net/assets/parts/30055/0/bricklink.webp)


![White Technic Brick 1 x 10 [9 Pin Holes]](https://api.brickonomics.net/assets/parts/2730/15/lego_element_273001_photoreal_00001.webp)



![Black Technic Brick 1 x 8 [7 Pin Holes]](https://api.brickonomics.net/assets/parts/3702/0/lego_element_370226_photoreal_00001.webp)






![Black Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://api.brickonomics.net/assets/parts/6019/0/lego_element_601976_photoreal_00001.webp)
![Black Technic Plate 2 x 8 [7 Holes]](https://api.brickonomics.net/assets/parts/3738/0/lego_element_373826_photoreal_00001.webp)



![Trans-Dark Blue Dish 2 x 2 Inverted [Radar]](https://api.brickonomics.net/assets/parts/4740/33/lego_element_6398233_photoreal_00001.webp)





![Black Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://api.brickonomics.net/assets/parts/73983/0/lego_element_6102782_photoreal_00001.webp)



![Dark Bluish Gray Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://api.brickonomics.net/assets/parts/73983/72/lego_element_6102774_photoreal_00001.webp)
















![White Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/15/lego_element_3200001_photoreal_00001.webp)


![White Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/15/lego_element_370001_photoreal_00001.webp)





![Light Bluish Gray Technic Brick 1 x 8 [7 Pin Holes]](https://api.brickonomics.net/assets/parts/3702/71/lego_element_4211442_photoreal_00001.webp)






















![Black Technic Plate 2 x 4 [3 Holes]](https://api.brickonomics.net/assets/parts/3709/0/lego_element_370926_photoreal_00001.webp)





![Light Bluish Gray Technic Axle Connector Smooth [with x Hole + Orientation]](https://api.brickonomics.net/assets/parts/59443/71/lego_element_4512360_photoreal_00001.webp)

![Dark Bluish Gray Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]](https://api.brickonomics.net/assets/parts/32530/72/lego_element_4210763_photoreal_00001.webp)


![Light Bluish Gray Technic Plate 2 x 4 [3 Holes]](https://api.brickonomics.net/assets/parts/3709/71/lego_element_4211444_photoreal_00001.webp)

















![White Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://api.brickonomics.net/assets/parts/4081b/15/lego_element_4632566_photoreal_00001.webp)









![Light Bluish Gray Technic Axle Connector Ridged [with x Hole x Orientation]](https://api.brickonomics.net/assets/parts/6538b/71/bricklink.webp)




![Light Bluish Gray Technic Brick 1 x 4 [3 Pin Holes]](https://api.brickonomics.net/assets/parts/3701/71/lego_element_4211441_photoreal_00001.webp)

















![Light Bluish Gray Bar 1 x 3 [Clip / Anti-Stud]](https://api.brickonomics.net/assets/parts/4735/71/lego_element_4211644_photoreal_00001.webp)










![Black Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]](https://api.brickonomics.net/assets/parts/44822/0/lego_element_4193108_photoreal_00001.webp)














![Trans-Neon Green Dish 2 x 2 Inverted [Radar]](https://api.brickonomics.net/assets/parts/4740/42/lego_element_6245297_photoreal_00001.webp)

![Light Bluish Gray Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]](https://api.brickonomics.net/assets/parts/32054/71/lego_element_4211865_photoreal_00001.webp)


![White Dish 4 x 4 Inverted [Radar]](https://api.brickonomics.net/assets/parts/3960/15/lego_element_396001_photoreal_00001.webp)







![Trans-Orange Cone 1 x 1 [No Top Groove]](https://api.brickonomics.net/assets/parts/4589/182/bricklink.webp)

![Dark Bluish Gray Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/72/lego_element_4211111_photoreal_00001.webp)





![Lime Technic Axle Connector Ridged [with x Hole x Orientation]](https://api.brickonomics.net/assets/parts/6538b/27/bricklink.webp)

![Black Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/0/lego_element_370026_photoreal_00001.webp)









![White Dish 3 x 3 Inverted [Radar]](https://api.brickonomics.net/assets/parts/43898/15/lego_element_4179580_photoreal_00001.webp)
![White Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://api.brickonomics.net/assets/parts/3660/15/lego_element_366001_photoreal_00001.webp)


![Dark Bluish Gray Plate Special 1 x 2 Side Handle [Free Ends]](https://api.brickonomics.net/assets/parts/2540/72/lego_element_4210660_photoreal_00001.webp)
![Green Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://api.brickonomics.net/assets/parts/32064b/2/bricklink.webp)
![Red Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]](https://api.brickonomics.net/assets/parts/32054/4/lego_element_4140806_photoreal_00001.webp)

![Dark Bluish Gray Animal / Creature Accessory, Horse Hitching, 1 x 2 Plate and 2 x 2 Plate [Studded]](https://api.brickonomics.net/assets/parts/2397/72/lego_element_4268684_photoreal_00001.webp)










![Orange Plate Special 1 x 2 Side Handle [Free Ends]](https://api.brickonomics.net/assets/parts/2540/25/lego_element_4190164_photoreal_00001.webp)


![Dark Bluish Gray Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/72/lego_element_4210762_photoreal_00001.webp)
![Light Bluish Gray Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/71/lego_element_4211440_photoreal_00001.webp)
![Black Plate Special 1 x 2 [Side Handle Closed Ends]](https://api.brickonomics.net/assets/parts/48336/0/lego_element_4225201_photoreal_00001.webp)























![Black Technic Plate 2 x 6 [5 Holes]](https://api.brickonomics.net/assets/parts/32001/0/lego_element_3200126_photoreal_00001.webp)



![Light Bluish Gray Pneumatic T-Piece (T Bar) [New Style]](https://api.brickonomics.net/assets/parts/4697b/71/lego_element_4211508_photoreal_00001.webp)
![White Technic Brick 1 x 6 [5 Pin Holes]](https://api.brickonomics.net/assets/parts/3894/15/lego_element_389401_photoreal_00001.webp)



![White Panel 1 x 2 x 1 [Square Corners]](https://api.brickonomics.net/assets/parts/4865a/15/lego_element_486501_photoreal_00001.webp)



![Light Bluish Gray Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://api.brickonomics.net/assets/parts/3660/71/lego_element_4211436_photoreal_00001.webp)








![White Technic Tooth 1 x 3 with Axle Hole [Rounded Underside]](https://api.brickonomics.net/assets/parts/41669/15/lego_element_4173941_photoreal_00001.webp)
![Black Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/0/lego_element_3200026_photoreal_00001.webp)




























![Black Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://api.brickonomics.net/assets/parts/32064b/0/bricklink.webp)
![White Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://api.brickonomics.net/assets/parts/32064b/15/bricklink.webp)




![Yellow Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://api.brickonomics.net/assets/parts/32064b/14/bricklink.webp)
![Light Bluish Gray Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://api.brickonomics.net/assets/parts/32064b/71/bricklink.webp)























![Dark Bluish Gray Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]](https://api.brickonomics.net/assets/parts/48170/72/lego_element_6279898_photoreal_00001.webp)






![Black Plate Special 1 x 2 Side Handle [Free Ends]](https://api.brickonomics.net/assets/parts/2540/0/lego_element_4140588_photoreal_00001.webp)


![Light Bluish Gray Plate Special 1 x 2 Side Handle [Free Ends]](https://api.brickonomics.net/assets/parts/2540/71/lego_element_4211632_photoreal_00001.webp)




![Black Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole [X Opening]](https://api.brickonomics.net/assets/parts/30389c/0/lego_element_4163904_photoreal_00001.webp)




![Dark Bluish Gray Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://api.brickonomics.net/assets/parts/4081b/72/lego_element_4210828_photoreal_00001.webp)


![Blue Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/1/lego_element_370023_photoreal_00001.webp)
![Light Bluish Gray Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/71/lego_element_4211541_photoreal_00001.webp)


![Black Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://api.brickonomics.net/assets/parts/4081b/0/lego_element_4632571_photoreal_00001.webp)





![White Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]](https://api.brickonomics.net/assets/parts/43337/15/lego_element_4173477_photoreal_00001.webp)





![Light Bluish Gray Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://api.brickonomics.net/assets/parts/4081b/71/lego_element_6281998_photoreal_00001.webp)



















![Black Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://api.brickonomics.net/assets/parts/2444/0/bricklink.webp)




![Black Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://api.brickonomics.net/assets/parts/3839b/0/lego_element_383926_photoreal_00001.webp)




![Light Bluish Gray Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://api.brickonomics.net/assets/parts/2654/71/lego_element_4278273_photoreal_00001.webp)










![Light Bluish Gray Plate Special 1 x 2 [Side Handle Closed Ends]](https://api.brickonomics.net/assets/parts/48336/71/lego_element_4244627_photoreal_00001.webp)




















![Black Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://api.brickonomics.net/assets/parts/2654/0/lego_element_265426_photoreal_00001.webp)


![White Plate Special 1 x 2 [Side Handle Closed Ends]](https://api.brickonomics.net/assets/parts/48336/15/lego_element_4222017_photoreal_00001.webp)


![Dark Bluish Gray Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://api.brickonomics.net/assets/parts/32064b/72/bricklink.webp)


![Dark Bluish Gray Technic Axle 5.5 with Stop [Rounded Short End]](https://api.brickonomics.net/assets/parts/59426/72/lego_element_4508553_photoreal_00001.webp)












![[No Color/Any Color] Sticker Sheet for Set 7694-1](https://api.brickonomics.net/assets/parts/59620/9999/bricklink.webp)
![[No Color/Any Color] Sticker Sheet for Set 7695-1](https://api.brickonomics.net/assets/parts/59619/9999/bricklink.webp)
![[No Color/Any Color] Sticker Sheet for Set 7692-1](https://api.brickonomics.net/assets/parts/59622/9999/bricklink.webp)


![[No Color/Any Color] Sticker Sheet for Set 7690-1](https://api.brickonomics.net/assets/parts/59624/9999/bricklink.webp)


![White Launcher, Aero Tube Air Pump 16 x 14 x 13 [Complete Assembly]](https://api.brickonomics.net/assets/parts/30584c01/15/bricklink.webp)
![[No Color/Any Color] Sticker Sheet for Set 7693-1](https://api.brickonomics.net/assets/parts/59621/9999/rebrickable_59621-9999-d55cae78-707e-4d8a-864a-f1703762ee5e.webp)

![[No Color/Any Color] Sticker Sheet for Set 7691-1](https://api.brickonomics.net/assets/parts/59623/9999/bricklink.webp)

![[No Color/Any Color] Sticker Sheet for Set 7699-1](https://api.brickonomics.net/assets/parts/60184/9999/bricklink.webp)


![[No Color/Any Color] Sticker Sheet for Set 7697-1](https://api.brickonomics.net/assets/parts/59625/9999/bricklink.webp)








