 | Hose Rigid 3mm D. 7L / 5.6cm   | White
| 2 | $1.90 | $3.80 | |
 | Wheel Rim 24 x 14.9 Wide with Black Slick Tyre with Red 'PIRELLI' print | Black
| 2 | $1.17 | $2.33 | |
 | Slope Curved 1 x 6 | Black
| 2 | $1.11 | $2.23 | |
 | Suspension Mount with Fender, Formula 1 | Black
| 2 | $1.07 | $2.14 | |
 | Wheel Rim 24 x 13.4 with Black Slick Tyre with Red 'PIRELLI' print | Black
| 2 | $1.03 | $2.06 | |
 | Tile Round 1 x 1 Quarter with Black Surface print | White
| 3 | $0.66 | $1.99 | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | White
| 3 | $0.64 | $1.91 | |
 | Plate 1 x 1 x 2/3 Half Round with Side Stud | White
| 6 | $0.31 | $1.87 | |
 | Slope Curved 4 x 2 with Stud Notch Left | Black
| 2 | $0.88 | $1.76 | |
![Image of part Dish 2 x 2 Inverted [Radar] with White Circle, Arrow, Red Strips, Dots print](https://cdn.rebrickable.com/media/parts/elements/6541153.jpg) | Dish 2 x 2 Inverted [Radar] with White Circle, Arrow, Red Strips, Dots print | Black
| 2 | $0.85 | $1.71 | |
 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions | Black
| 2 | $0.84 | $1.68 | |
 | Slope Curved 4 x 2 with Stud Notch Right | Black
| 2 | $0.84 | $1.68 | |
![Image of part Dish 2 x 2 Inverted [Radar] with White Circle, Arrow, Red Strips, Dots print](https://cdn.rebrickable.com/media/parts/elements/6541377.jpg) | Dish 2 x 2 Inverted [Radar] with White Circle, Arrow, Red Strips, Dots print | Black
| 2 | $0.80 | $1.60 | |
 | Tile Round 1 x 1 with Black Surface print | White
| 2 | $0.71 | $1.41 | |
 | Slope 18° 2 x 1 x 2/3 | Black
| 2 | $0.57 | $1.14 | |
 | Tile Round 1 x 1 Half Circle with Red 'H' in Circle print | White
| 2 | $0.54 | $1.09 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6156991.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Black
| 10 | $0.09 | $0.95 | |
 | Tile 1 x 2 with Stud Notch Right | Black
| 3 | $0.31 | $0.94 | |
 | Tile 1 x 2 with Stud Notch Left | Black
| 3 | $0.31 | $0.94 | |
 | Equipment Cutlery - Spoon, Flat Bottom | Black
| 3 | $0.31 | $0.94 | |
 | Minifig Neckwear Bracket with 2 Back Studs | Trans-Clear
| 2 | $0.46 | $0.92 | |
 | Slope Curved 2 x 6 Inverted | Black
| 1 | $0.91 | $0.91 | |
 | Tile 1 x 1 with 15 Silver Dots print | Black
| 2 | $0.43 | $0.87 | |
 | Game Controller with F1 Steering Wheel Controls print | Pearl Titanium
| 1 | $0.84 | $0.84 | |
 | Slope Curved 1 x 6 with White 'H', Arrow on red Circles, White Sponsors print | Black
| 1 | $0.83 | $0.83 | |
![Image of part Technic Brick 1 x 3 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/6494104.jpg) | Technic Brick 1 x 3 [3 Pin Holes] | Red
| 2 | $0.39 | $0.79 | |
 | Slope Curved 2 x 2 with Stud Notch Right | Red
| 1 | $0.77 | $0.77 | |
 | Slope Curved 2 x 2 with Stud Notch Left | Red
| 1 | $0.76 | $0.76 | |
 | Hair Coiled, Straight Sides | Dark Brown
| 1 | $0.72 | $0.72 | |
 | Plate Round 1 x 2 Half Circle with Stud (Jumper) | Black
| 3 | $0.23 | $0.69 | |
 | Wedge Sloped 1 x 5 x 1 1/3 Right | Black
| 1 | $0.65 | $0.65 | |
 | Wedge Sloped 1 x 5 x 1 1/3 Left | Black
| 1 | $0.62 | $0.62 | |
 | Tile Round 1 x 2 Half Circle | Black
| 3 | $0.20 | $0.61 | |
![Image of part Minifig Neckwear Bracket [One Stud] - Reinforced](https://cdn.rebrickable.com/media/parts/elements/6170808.jpg) | Minifig Neckwear Bracket [One Stud] - Reinforced | Black
| 2 | $0.30 | $0.60 | |
 | Technic Beam 1 x 3 Thin | Black
| 4 | $0.15 | $0.60 | |
 | Brick Special 1 x 2 Rounded with Center Bars | Black
| 2 | $0.30 | $0.60 | |
 | Technic Pin 1/2 with Friction | Dark Bluish Gray
| 7 | $0.08 | $0.57 | |
 | Bracket 1 x 2 - 1 x 2 | Black
| 6 | $0.09 | $0.57 | |
 | Plate 1 x 3 | Black
| 4 | $0.14 | $0.54 | |
 | Bracket 1 x 1 - 1 x 2 Inverted | White
| 2 | $0.27 | $0.54 | |
 | Tile 1 x 2 with Stud Notch Left | Red
| 1 | $0.50 | $0.50 | |
 | Tile 1 x 2 with Stud Notch Right | Red
| 1 | $0.49 | $0.49 | |
 | Tile 2 x 4 with Groove | Black
| 2 | $0.24 | $0.49 | |
 | Wedge Plate 2 x 2 Left | Black
| 3 | $0.15 | $0.45 | |
 | Wedge Plate 2 x 2 Right | Black
| 3 | $0.15 | $0.45 | |
 | Plate 3 x 3 Corner | Black
| 2 | $0.19 | $0.38 | |
 | Plate 1 x 2 | Red
| 9 | $0.04 | $0.37 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | Black
| 5 | $0.07 | $0.34 | |
 | Plate 1 x 5 | Light Bluish Gray
| 2 | $0.16 | $0.33 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs | Black
| 4 | $0.08 | $0.33 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | Light Bluish Gray
| 4 | $0.08 | $0.33 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Dark Bluish Gray
| 2 | $0.16 | $0.33 | |
 | Tile Round 1 x 1 with Hollow Bar | Dark Bluish Gray
| 4 | $0.07 | $0.27 | |
 | Plate 2 x 2 Corner | White
| 4 | $0.07 | $0.27 | |
 | Bar Holder with Hole and Bar Handle | White
| 2 | $0.12 | $0.24 | |
 | Bracket 1 x 1 - 1 x 2 Inverted | Black
| 1 | $0.23 | $0.23 | |
 | Tile Round 2 x 2 with Hole | White
| 1 | $0.22 | $0.22 | |
 | Brick Curved, 3 x 1 with 1/3 Inverted Cutout | Black
| 2 | $0.11 | $0.22 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Black
| 4 | $0.05 | $0.22 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet | White
| 2 | $0.11 | $0.22 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 4 | $0.05 | $0.22 | |
 | Vehicle Base 4 x 10 x 2/3 with 4 x 2 Recessed Center with Smooth Underside | Black
| 1 | $0.20 | $0.20 | |
 | Plate 2 x 4 | Black
| 3 | $0.07 | $0.20 | |
 | Tile 1 x 1 with Groove | White
| 3 | $0.07 | $0.20 | |
 | Technic Brick 1 x 1 with Axle Hole | Dark Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Plate 1 x 1 x 2/3 with Open Stud | Dark Orange
| 2 | $0.09 | $0.19 | |
 | Technic Axle Pin 3L without Friction Ridges and 2L Axle | White
| 2 | $0.09 | $0.19 | |
 | Tile 1 x 2 with Groove | Black
| 2 | $0.09 | $0.19 | |
 | Plate Special 3 x 2 with Rounded End, Hole | White
| 1 | $0.18 | $0.18 | |
 | Wedge Plate 2 x 4 27° Right | Black
| 1 | $0.18 | $0.18 | |
 | Wedge Plate 2 x 4 27° Left | Black
| 1 | $0.18 | $0.18 | |
 | Bracket 1 x 1 - 1 x 1 | White
| 1 | $0.18 | $0.18 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469445.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version | Black
| 2 | $0.08 | $0.16 | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092570.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | Black
| 2 | $0.08 | $0.16 | |
 | Slope Curved 4 x 1 Double with No Studs | Black
| 2 | $0.08 | $0.16 | |
 | Plate 1 x 1 | White
| 3 | $0.05 | $0.16 | |
 | Plate Round 1 x 1 with Open Stud | Yellow
| 3 | $0.05 | $0.16 | |
 | Plate 2 x 3 | Black
| 2 | $0.08 | $0.16 | |
 | Brick Round 2 x 2, Pin Holes | Light Bluish Gray
| 1 | $0.16 | $0.16 | |
 | Animal / Creature Body Part, Claw with Clip | Black
| 1 | $0.16 | $0.16 | |
 | Technic Pin 1/2 with Friction | Red
| 3 | $0.05 | $0.16 | |
 | Plate Round 1 x 1 with Solid Stud | Light Bluish Gray
| 4 | $0.04 | $0.16 | |
 | Plate 1 x 1 x 2/3 with Open Stud | Black
| 1 | $0.14 | $0.14 | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439046.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | White
| 1 | $0.14 | $0.14 | |
 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | Dark Bluish Gray
| 1 | $0.14 | $0.14 | |
 | Plate 1 x 4 | Black
| 2 | $0.07 | $0.14 | |
 | Slope 30° 1 x 2 x 2/3 | White
| 2 | $0.07 | $0.14 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Black
| 2 | $0.07 | $0.14 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029946.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Red
| 2 | $0.07 | $0.14 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Black
| 1 | $0.12 | $0.12 | |
 | Brick 2 x 3 | Blue
| 1 | $0.12 | $0.12 | |
 | Plate Round 1 x 1 with Solid Stud | Black
| 3 | $0.04 | $0.12 | |
 | Tile Round 1 x 1 Quarter | Black
| 3 | $0.04 | $0.12 | |
 | Plate 2 x 2 | Blue
| 2 | $0.05 | $0.11 | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146220.jpg) | Panel 1 x 2 x 1 [Rounded Corners] | Black
| 2 | $0.05 | $0.11 | |
 | Plate 2 x 2 | Black
| 2 | $0.05 | $0.11 | |
 | Tile 1 x 2 with Groove | Blue
| 1 | $0.09 | $0.09 | |
 | Plate Special 2 x 2 with Only 2 studs | Red
| 1 | $0.09 | $0.09 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 3 | $0.03 | $0.08 | |
 | Plate Special 2 x 2 with Only 2 studs | Black
| 1 | $0.08 | $0.08 | |
 | Brick Curved 2 x 2, Two Top Studs | Black
| 1 | $0.08 | $0.08 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 1 | $0.08 | $0.08 | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 3 | $0.03 | $0.08 | |
 | Technic Axle Pin without Friction Ridges Lengthwise | Tan
| 2 | $0.04 | $0.08 | |
 | Tool Screwdriver and Spanner / Wrench | Flat Silver
| 1 | $0.07 | $0.07 | |
 | Plate 2 x 4 | Blue
| 1 | $0.07 | $0.07 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray
| 1 | $0.07 | $0.07 | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg) | Plate Special 1 x 2 [Open O Top Clip] | Black
| 2 | $0.03 | $0.05 | |
 | Wedge Plate 4 x 2 Left | Black
| 1 | $0.05 | $0.05 | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends] | Black
| 1 | $0.05 | $0.05 | |
 | Wedge Plate 4 x 2 Right | Black
| 1 | $0.05 | $0.05 | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4114294.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Black
| 1 | $0.04 | $0.04 | |
 | Technic Axle 4 | Black
| 1 | $0.04 | $0.04 | |
 | Technic Axle 4 | Red
| 1 | $0.04 | $0.04 | |
