 | Hinge Brick 1 x 2 Top Plate Thin  | Red
| 2 | $1.25 | $2.51 | 2 x $1.25 $2.51 |
 | Wheel Rim 24 x 14.9 Wide with Black Slick Tyre with Yellow 'PIRELLI' Print  | Black
| 2 | $1.03 | $2.06 | 2 x $1.03 $2.06 |
 | Bracket 1 x 1 - 1 x 1  | Red
| 6 | $0.33 | $1.98 | 6 x $0.33 $1.98 |
 | Wheel Rim 24 x 13.4 with Black Slick Tyre with Yellow 'PIRELLI P ZERO' Print  | Black
| 2 | $0.96 | $1.93 | 2 x $0.96 $1.93 |
![Black Dish 2 x 2 Inverted [Radar] with Red/White/Yellow Circles Print](https://api.brickonomics.net/assets/parts/4740pr0027/0/lego_element_6539343_photoreal_00001.webp) | Dish 2 x 2 Inverted [Radar] with Red/White/Yellow Circles Print  | Black
| 4 | $0.37 | $1.48 | 4 x $0.37 $1.48 |
 | Plate Special 1 x 1 x 2/3 Half Round with Side Stud  | Red
| 4 | $0.36 | $1.43 | 4 x $0.36 $1.43 |
 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions  | Black
| 2 | $0.71 | $1.43 | 2 x $0.71 $1.43 |
 | Brick Curved 1 x 1  | Red
| 2 | $0.70 | $1.40 | 2 x $0.70 $1.40 |
 | Hose Rigid 3mm D. 7L / 5.6cm  | Red
| 1 | $1.28 | $1.28 | 1 x $1.28 $1.28 |
 | Brick Wedged, Sloped 1 x 5 x 1 1/3 Right  | Red
| 1 | $1.25 | $1.25 | 1 x $1.25 $1.25 |
 | Brick Wedged, Sloped 1 x 5 x 1 1/3 Left  | Red
| 1 | $1.25 | $1.25 | 1 x $1.25 $1.25 |
 | Suspension Mount with Fender, Formula 1  | Black
| 2 | $0.62 | $1.24 | 2 x $0.62 $1.24 |
 | Plate Special 1 x 1 x 2/3 Half Round with Side Stud  | Black
| 4 | $0.26 | $1.06 | 4 x $0.26 $1.06 |
 | Brick Sloped 30° 1 x 1 x 2/3 with Ferrari Logo Print  | Red
| 2 | $0.49 | $0.98 | 2 x $0.49 $0.98 |
![Black Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://api.brickonomics.net/assets/parts/99563/0/lego_element_6156991_photoreal_00001.webp) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Black
| 10 | $0.09 | $0.92 | 10 x $0.09 $0.92 |
 | Brick Sloped 75° 2 x 1 x 3 with Hollow Stud  | Red
| 2 | $0.44 | $0.87 | 2 x $0.44 $0.87 |
 | Minifig Neckwear Bracket with 2 Back Studs  | Trans-Clear
| 2 | $0.44 | $0.87 | 2 x $0.44 $0.87 |
![Red Minifig Neckwear Bracket [One Stud] - Reinforced](https://api.brickonomics.net/assets/parts/28974/4/lego_element_6534947_photoreal_00001.webp) | Minifig Neckwear Bracket [One Stud] - Reinforced  | Red
| 3 | $0.28 | $0.83 | 3 x $0.28 $0.83 |
 | Tile Round 1 x 2 Half Circle  | Red
| 2 | $0.41 | $0.82 | 2 x $0.41 $0.82 |
 | Plate 1 x 2 with White Stripe Print  | Red
| 2 | $0.41 | $0.82 | 2 x $0.41 $0.82 |
 | Equipment Cutlery - Spoon, Flat Bottom  | Red
| 3 | $0.25 | $0.75 | 3 x $0.25 $0.75 |
 | Brick Wedged, Curved 2 x 2 with Stud Notch Right  | Red
| 1 | $0.69 | $0.69 | 1 x $0.69 $0.69 |
 | Brick Wedged, Curved 2 x 2 with Stud Notch Left  | Red
| 1 | $0.66 | $0.66 | 1 x $0.66 $0.66 |
 | Game Controller with F1 Steering Wheel Controls Print  | Pearl Titanium
| 1 | $0.65 | $0.65 | 1 x $0.65 $0.65 |
 | Tile 1 x 1 with 15 Silver Dots Print  | Black
| 2 | $0.32 | $0.63 | 2 x $0.32 $0.63 |
 | Brick Curved 1 x 4 x 2/3 Double, No Studs with White 'Santander', White and Yellow Stripes Print  | Red
| 2 | $0.30 | $0.61 | 2 x $0.30 $0.61 |
 | Brick Curved 2 x 6 Inverted  | Black
| 1 | $0.59 | $0.59 | 1 x $0.59 $0.59 |
 | Plate Special Round 1 x 2 Half Circle with Stud (Jumper)  | Black
| 3 | $0.20 | $0.59 | 3 x $0.20 $0.59 |
 | Technic Beam 1 x 3 Thin  | Black
| 4 | $0.15 | $0.58 | 4 x $0.15 $0.58 |
 | Bar Holder with Hole and Bar Handle  | Red
| 2 | $0.29 | $0.58 | 2 x $0.29 $0.58 |
 | Bracket 1 x 2 - 1 x 2  | Black
| 6 | $0.09 | $0.55 | 6 x $0.09 $0.55 |
 | Brick Sloped 30° 1 x 1 x 2/3 with Ferrari Logo, Black Triangle Print  | Red
| 2 | $0.26 | $0.53 | 2 x $0.26 $0.53 |
 | Brick Sloped 30° 1 x 1 x 2/3 with Ferrari Logo, Black Triangle Print  | Red
| 2 | $0.25 | $0.50 | 2 x $0.25 $0.50 |
 | Tile 1 x 2 with Stud Notch Right  | Black
| 2 | $0.25 | $0.50 | 2 x $0.25 $0.50 |
 | Tile 1 x 2 with Stud Notch Left  | Black
| 2 | $0.24 | $0.48 | 2 x $0.24 $0.48 |
 | Brick Wedged, Curved 2 x 2 with Stud Notch Right  | Black
| 1 | $0.42 | $0.42 | 1 x $0.42 $0.42 |
 | Brick Curved 1 x 6 with Black Sides, White/Yellow Stripes, Yellow Shell, White Sponsors Print  | Red
| 1 | $0.41 | $0.41 | 1 x $0.41 $0.41 |
 | Brick Wedged, Curved 2 x 2 with Stud Notch Left  | Black
| 1 | $0.41 | $0.41 | 1 x $0.41 $0.41 |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Light Bluish Gray
| 6 | $0.07 | $0.40 | 6 x $0.07 $0.40 |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Black
| 6 | $0.07 | $0.40 | 6 x $0.07 $0.40 |
 | Plate 1 x 1  | Dark Bluish Gray
| 7 | $0.05 | $0.37 | 7 x $0.05 $0.37 |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | Black
| 4 | $0.09 | $0.37 | 4 x $0.09 $0.37 |
 | Hair Short, Tousled with Side Part  | Black
| 1 | $0.37 | $0.37 | 1 x $0.37 $0.37 |
 | Plate 1 x 1 x 2/3 with Open Stud  | Black
| 3 | $0.12 | $0.36 | 3 x $0.12 $0.36 |
 | Bracket 1 x 1 - 1 x 1  | Black
| 2 | $0.17 | $0.34 | 2 x $0.17 $0.34 |
 | Tile Round 1 x 2 Half Circle  | Black
| 2 | $0.17 | $0.34 | 2 x $0.17 $0.34 |
 | Brick Wedged, Curved 4 x 2 with Stud Notch Right with White/Yellow Stripes on Side Print  | Red
| 1 | $0.34 | $0.34 | 1 x $0.34 $0.34 |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Black
| 5 | $0.07 | $0.33 | 5 x $0.07 $0.33 |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Light Bluish Gray
| 4 | $0.08 | $0.32 | 4 x $0.08 $0.32 |
 | Plate 3 x 3 Corner  | Black
| 2 | $0.16 | $0.32 | 2 x $0.16 $0.32 |
 | Plate 1 x 1  | Red
| 7 | $0.04 | $0.28 | 7 x $0.04 $0.28 |
![Red Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://api.brickonomics.net/assets/parts/3484/4/lego_element_6439048_photoreal_00001.webp) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]  | Red
| 1 | $0.28 | $0.28 | 1 x $0.28 $0.28 |
 | Tile Special Round 1 x 1 with Hollow Bar  | Dark Bluish Gray
| 4 | $0.07 | $0.26 | 4 x $0.07 $0.26 |
 | Tile 1 x 1 with Groove  | Black
| 3 | $0.08 | $0.24 | 3 x $0.08 $0.24 |
 | Brick Wedged, Curved 4 x 2 with Stud Notch Left with White/Yellow Stripes on Side Print  | Red
| 1 | $0.24 | $0.24 | 1 x $0.24 $0.24 |
 | Plate 1 x 4  | White
| 3 | $0.08 | $0.24 | 3 x $0.08 $0.24 |
 | Tile 1 x 4 with Groove  | Black
| 2 | $0.12 | $0.24 | 2 x $0.12 $0.24 |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Yellow
| 3 | $0.08 | $0.24 | 3 x $0.08 $0.24 |
 | Plate 2 x 2  | Red
| 4 | $0.05 | $0.21 | 4 x $0.05 $0.21 |
 | Plate Special 1 x 1 with Tooth  | Black
| 4 | $0.05 | $0.21 | 4 x $0.05 $0.21 |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Black
| 4 | $0.05 | $0.21 | 4 x $0.05 $0.21 |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Black
| 1 | $0.21 | $0.21 | 1 x $0.21 $0.21 |
 | Plate Special 3 x 2 with Rounded End, Hole  | Red
| 1 | $0.21 | $0.21 | 1 x $0.21 $0.21 |
 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)  | Black
| 1 | $0.20 | $0.20 | 1 x $0.20 $0.20 |
 | Plate 1 x 2  | Red
| 5 | $0.04 | $0.20 | 5 x $0.04 $0.20 |
 | Technic Pin 1/2 with Friction  | Dark Bluish Gray
| 3 | $0.07 | $0.20 | 3 x $0.07 $0.20 |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Red
| 3 | $0.07 | $0.20 | 3 x $0.07 $0.20 |
 | Vehicle Base 4 x 10 x 2/3 with 4 x 2 Recessed Center with Smooth Underside  | Black
| 1 | $0.18 | $0.18 | 1 x $0.18 $0.18 |
 | Technic Axle Pin 3L without Friction Ridges and 2L Axle  | White
| 2 | $0.09 | $0.18 | 2 x $0.09 $0.18 |
 | Plate 1 x 6  | Dark Bluish Gray
| 2 | $0.09 | $0.18 | 2 x $0.09 $0.18 |
 | Plate 1 x 1 x 2/3 with Open Stud  | Dark Orange
| 2 | $0.09 | $0.18 | 2 x $0.09 $0.18 |
 | Brick Curved, 3 x 1 with 1/3 Inverted Cutout  | Black
| 2 | $0.09 | $0.18 | 2 x $0.09 $0.18 |
 | Plate Round 1 x 1 with Open Stud  | Yellow
| 3 | $0.05 | $0.16 | 3 x $0.05 $0.16 |
 | Tile 1 x 1 with Groove  | Red
| 3 | $0.05 | $0.16 | 3 x $0.05 $0.16 |
 | Bracket 1 x 1 - 1 x 1 Inverted  | Dark Bluish Gray
| 2 | $0.08 | $0.16 | 2 x $0.08 $0.16 |
 | Plate Round 1 x 1 with Solid Stud  | Light Bluish Gray
| 4 | $0.04 | $0.16 | 4 x $0.04 $0.16 |
 | Hinge Brick 1 x 2 Base  | Red
| 2 | $0.08 | $0.16 | 2 x $0.08 $0.16 |
 | Wedge Plate 2 x 4 27° Left  | Black
| 1 | $0.16 | $0.16 | 1 x $0.16 $0.16 |
![Black Brick Curved 2 x 1 No Studs [1/2 Bow]](https://api.brickonomics.net/assets/parts/11477/0/lego_element_6047276_photoreal_00001.webp) | Brick Curved 2 x 1 No Studs [1/2 Bow]  | Black
| 2 | $0.08 | $0.16 | 2 x $0.08 $0.16 |
 | Technic Brick 1 x 1 with Axle Hole  | Dark Bluish Gray
| 1 | $0.16 | $0.16 | 1 x $0.16 $0.16 |
 | Wedge Plate 2 x 4 27° Right  | Black
| 1 | $0.16 | $0.16 | 1 x $0.16 $0.16 |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Black
| 2 | $0.08 | $0.16 | 2 x $0.08 $0.16 |
 | Plate Special 2 x 2 with Only 2 Studs  | Black
| 2 | $0.08 | $0.16 | 2 x $0.08 $0.16 |
 | Brick Curved 4 x 1 Double, No Studs  | Black
| 2 | $0.08 | $0.16 | 2 x $0.08 $0.16 |
 | Brick Wedged, Curved 2 x 1 with Stud Notch Left  | Black
| 1 | $0.16 | $0.16 | 1 x $0.16 $0.16 |
 | Animal / Creature Body Part, Claw with Clip  | Black
| 1 | $0.15 | $0.15 | 1 x $0.15 $0.15 |
 | Brick Wedged, Curved 2 x 1 with Stud Notch Right  | Black
| 1 | $0.15 | $0.15 | 1 x $0.15 $0.15 |
 | Wedge Plate 2 x 2 Left  | Black
| 1 | $0.13 | $0.13 | 1 x $0.13 $0.13 |
 | Wedge Plate 2 x 2 Right  | Black
| 1 | $0.13 | $0.13 | 1 x $0.13 $0.13 |
 | Tile 1 x 1 with Groove  | White
| 2 | $0.07 | $0.13 | 2 x $0.07 $0.13 |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Red
| 2 | $0.07 | $0.13 | 2 x $0.07 $0.13 |
 | Brick Sloped 30° 1 x 2 x 2/3  | Black
| 2 | $0.07 | $0.13 | 2 x $0.07 $0.13 |
![Dark Bluish Gray Brick Curved 2 x 1 No Studs [1/2 Bow]](https://api.brickonomics.net/assets/parts/11477/72/lego_element_6029948_photoreal_00001.webp) | Brick Curved 2 x 1 No Studs [1/2 Bow]  | Dark Bluish Gray
| 2 | $0.07 | $0.13 | 2 x $0.07 $0.13 |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Red
| 2 | $0.07 | $0.13 | 2 x $0.07 $0.13 |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Red
| 2 | $0.07 | $0.13 | 2 x $0.07 $0.13 |
 | Tile Round 1 x 1 Quarter  | Red
| 3 | $0.04 | $0.12 | 3 x $0.04 $0.12 |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 3 | $0.04 | $0.12 | 3 x $0.04 $0.12 |
 | Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale)  | Tan
| 1 | $0.12 | $0.12 | 1 x $0.12 $0.12 |
 | Tile Round 1 x 1 Quarter  | Black
| 3 | $0.04 | $0.12 | 3 x $0.04 $0.12 |
 | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 3 | $0.04 | $0.12 | 3 x $0.04 $0.12 |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Black
| 2 | $0.05 | $0.11 | 2 x $0.05 $0.11 |
 | Plate Special 3 x 2 with Rounded End, Hole  | Black
| 1 | $0.11 | $0.11 | 1 x $0.11 $0.11 |
 | Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L  | Black
| 2 | $0.05 | $0.11 | 2 x $0.05 $0.11 |
 | Brick 1 x 1  | Red
| 2 | $0.05 | $0.11 | 2 x $0.05 $0.11 |
 | Panel 1 x 1 x 1 Corner  | Red
| 2 | $0.05 | $0.11 | 2 x $0.05 $0.11 |
![Black Panel 1 x 2 x 1 [Rounded Corners]](https://api.brickonomics.net/assets/parts/4865b/0/lego_element_6146220_photoreal_00001.webp) | Panel 1 x 2 x 1 [Rounded Corners]  | Black
| 2 | $0.05 | $0.11 | 2 x $0.05 $0.11 |
 | Plate Special 2 x 2 with Only 2 Studs  | Dark Orange
| 1 | $0.09 | $0.09 | 1 x $0.09 $0.09 |
![Black Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://api.brickonomics.net/assets/parts/28802/0/lego_element_6168620_photoreal_00001.webp) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]  | Black
| 2 | $0.04 | $0.08 | 2 x $0.04 $0.08 |
 | Brick 2 x 2  | Red
| 1 | $0.08 | $0.08 | 1 x $0.08 $0.08 |
 | Tile Round 1 x 1  | Yellow
| 2 | $0.04 | $0.08 | 2 x $0.04 $0.08 |
![Red Plate Special 1 x 2, Top Clip [Open O]](https://api.brickonomics.net/assets/parts/44861/4/lego_element_6347308_photoreal_00001.webp) | Plate Special 1 x 2, Top Clip [Open O]  | Red
| 2 | $0.04 | $0.08 | 2 x $0.04 $0.08 |
 | Plate 1 x 2  | Yellow
| 2 | $0.04 | $0.08 | 2 x $0.04 $0.08 |
 | Brick Round 2 x 2, Pin Holes  | Yellow
| 1 | $0.08 | $0.08 | 1 x $0.08 $0.08 |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 2 | $0.04 | $0.08 | 2 x $0.04 $0.08 |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 2 | $0.04 | $0.08 | 2 x $0.04 $0.08 |
 | Plate 2 x 3  | Black
| 1 | $0.08 | $0.08 | 1 x $0.08 $0.08 |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced  | Light Bluish Gray
| 3 | $0.03 | $0.08 | 3 x $0.03 $0.08 |
 | Door 1 x 3 x 1 Right  | Red
| 1 | $0.07 | $0.07 | 1 x $0.07 $0.07 |
 | Door 1 x 3 x 1 Left  | Red
| 1 | $0.07 | $0.07 | 1 x $0.07 $0.07 |
 | Plate 1 x 4  | Black
| 1 | $0.07 | $0.07 | 1 x $0.07 $0.07 |
 | Tile Special Round 2 x 2 with Hole  | Red
| 1 | $0.07 | $0.07 | 1 x $0.07 $0.07 |
 | Tool Screwdriver and Spanner / Wrench  | Flat Silver
| 1 | $0.07 | $0.07 | 1 x $0.07 $0.07 |
 | Brick Sloped 45° 2 x 1 Double with Inside Stud Holder  | Red
| 1 | $0.05 | $0.05 | 1 x $0.05 $0.05 |
 | Wedge Plate 4 x 2 Right  | Black
| 1 | $0.05 | $0.05 | 1 x $0.05 $0.05 |
![Black Plate Special 1 x 2 [Side Handle Closed Ends]](https://api.brickonomics.net/assets/parts/48336/0/lego_element_4225201_photoreal_00001.webp) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 1 | $0.05 | $0.05 | 1 x $0.05 $0.05 |
 | Wedge Plate 4 x 2 Left  | Black
| 1 | $0.05 | $0.05 | 1 x $0.05 $0.05 |
 | Technic Axle 4  | Black
| 1 | $0.04 | $0.04 | 1 x $0.04 $0.04 |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | White
| 1 | $0.04 | $0.04 | 1 x $0.04 $0.04 |
 | Technic Axle 4  | Red
| 1 | $0.04 | $0.04 | 1 x $0.04 $0.04 |
![Black Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://api.brickonomics.net/assets/parts/32064a/0/lego_element_6178922_photoreal_00001.webp) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin  | Black
| 1 | $0.04 | $0.04 | 1 x $0.04 $0.04 |