| Dish 2 x 2 Inverted [Radar] with Black Stripes / Radiant print | Light Bluish Gray
| 5 | | | |
| Wheel Arch, Mudguard 2 x 4 x 2 | Dark Red
| 4 | | | |
| Vehicle Base 6 x 12 x 1 | Black
| 2 | | | |
| Wheel Rim 24 x 12 with Black Tyre | Black
| 8 | | | |
| Torso Jacket, Open over White Undershirt with Checkered Flag Print, Black Arms, Yellow Hands | Black
| 1 | | | |
| Sticker Sheet 1 for Set 76903-1 | [No Color/Any Color]
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 | Dark Red
| 7 | | | |
| Bracket 1 x 1 - 1 x 2 Inverted | Black
| 4 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Red
| 8 | | | |
| Tile 2 x 4 with Groove | Dark Red
| 4 | | | |
| Sticker Sheet 2 for Set 76903-1 | [No Color/Any Color]
| 1 | | | |
| Tile 2 x 6 | Dark Red
| 3 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Dark Bluish Gray
| 5 | | | |
| Plate 1 x 6 | Black
| 9 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Dark Bluish Gray
| 5 | | | |
| Tile 1 x 3 | Dark Bluish Gray
| 6 | | | |
| Bracket 1 x 1 - 1 x 1 | Dark Orange
| 10 | | | |
| Slope Curved 2 x 2 x 2/3 | Dark Red
| 8 | | | |
| Wheel Bearing 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Recessed, Bar at Underside | Dark Bluish Gray
| 4 | | | |
| Plate 1 x 6 | Light Bluish Gray
| 6 | | | |
| Plate 1 x 2 | Dark Bluish Gray
| 11 | | | |
| Plate 1 x 2 | Trans-Brown
| 5 | | | |
| Wheel Cover 9 Spoke - for Wheel 72206 | Black
| 4 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Dark Bluish Gray
| 6 | | | |
| Hips and Dark Blue Legs | Dark Blue
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Black
| 10 | | | |
| Bracket 1 x 1 - 1 x 2 Inverted | Dark Bluish Gray
| 4 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Dark Bluish Gray
| 2 | | | |
| Minifig Head Samurapper, Eyebrows and Scowl, White Pupils Print | Yellow
| 1 | | | |
| Bracket 1 x 1 - 1 x 1 Inverted | Black
| 4 | | | |
| Wheel Cover 5 Spoke - for Wheel 72206 | Black
| 4 | | | |
| Hair Mid-Length with Part over Front of Right Shoulder | Dark Orange
| 1 | | | |
| Plate 1 x 3 | Dark Bluish Gray
| 6 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Red
| 7 | | | |
| Tile 1 x 1 with Groove | Dark Red
| 6 | | | |
| Windscreen 6 x 6 x 1 1/3 with Yellow Wings, 'Corvette' Print | Trans-Brown
| 1 | | | |
| Hips and White Legs with White/Yellow/Black Racing Suit print | White
| 1 | | | |
| Torso Race Jacket, White Chest with Chevron, Michelin, and Mobil Logos Print, Bright Light Orange Arms, Black Hands | Black
| 1 | | | |
| Minifig Head, Open Mouth Smile, Peach Lips | Yellow
| 1 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Dark Bluish Gray
| 4 | | | |
| Plate 1 x 2 | Dark Turquoise
| 12 | | | |
| Tile 2 x 3 | Light Bluish Gray
| 2 | | | |
| Tile 45° Cut 2 x 2 (Triangle) | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 2 Corner | Green
| 8 | | | |
| Tile 1 x 8 with Groove | Dark Red
| 2 | | | |
| Hair Short, Tousled with Side Part | Dark Brown
| 1 | | | |
| Tile Special 2 x 3 Pentagonal | Dark Bluish Gray
| 2 | | | |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Light Bluish Gray
| 5 | | | |
| Tile 1 x 8 with Groove | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 8 | | | |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | Black
| 5 | | | |
| Slope 18° 4 x 1 | Dark Red
| 2 | | | |
| Bracket 1 x 1 - 1 x 1 Inverted | Red
| 2 | | | |
| Wheel Arch, Mudguard 4 x 2 1/2 x 1 | Dark Bluish Gray
| 4 | | | |
| Bracket 1 x 1 - 1 x 1 | Black
| 2 | | | |
| Brick Special 1 x 1 with Headlight and Slot | Light Bluish Gray
| 4 | | | |
| Tile 1 x 8 with Groove | Black
| 2 | | | |
| Brick 2 x 4 | Tan
| 2 | | | |
| Tile 1 x 6 with Groove | Light Bluish Gray
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Bluish Gray
| 4 | | | |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | Black
| 2 | | | |
| Bracket 1 x 1 - 1 x 1 Inverted | Light Bluish Gray
| 2 | | | |
| Plate 2 x 3 | Dark Bluish Gray
| 6 | | | |
| Slope Curved 4 x 2 No Studs | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 4 | Orange
| 6 | | | |
| Panel 1 x 1 x 1 Corner | Black
| 4 | | | |
| Technic Axle Pin without Friction Ridges Lengthwise | Tan
| 8 | | | |
| Plate 2 x 6 | Black
| 3 | | | |
| Plate 1 x 1 | Dark Red
| 6 | | | |
| Plate 3 x 3 | Black
| 2 | | | |
| Tile 1 x 4 with Groove | Dark Bluish Gray
| 2 | | | |
| Tile 1 x 3 | Dark Red
| 2 | | | |
| Tile 1 x 2 with Yellow Square print | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 1 | Dark Bluish Gray
| 5 | | | |
| Tile 2 x 2 Corner | Black
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Red
| 5 | | | |
| Wedge Plate 2 x 2 Right | Yellow
| 1 | | | |
| Plate 1 x 2 | Dark Red
| 7 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Bluish Gray
| 4 | | | |
| Plate 1 x 1 | Blue
| 5 | | | |
| Plate 2 x 2 Corner | Dark Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 with Door Rail | Black
| 3 | | | |
| Plate Round 1 x 1 with Solid Stud | Blue
| 10 | | | |
| Wedge Plate 2 x 2 Left | Yellow
| 1 | | | |
| Brick Special 1 x 1 with Headlight and Slot | Black
| 2 | | | |
| Plate Special 1 x 1 with Vertical Tooth | Black
| 2 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Black
| 2 | | | |
| Helmet, Standard | Black
| 1 | | | |
| Plate 2 x 4 | Dark Red
| 4 | | | |
| Brick 2 x 6 | Black
| 1 | | | |
| Tile 1 x 2 with Groove | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 2 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Dark Red
| 2 | | | |
| Windscreen 3 x 6 x 2 | Trans-Brown
| 1 | | | |
| Tile 1 x 1 with Groove | Dark Bluish Gray
| 3 | | | |
| Tile 1 x 2 with Groove | Red
| 4 | | | |
| Tile 2 x 4 with Groove | Dark Bluish Gray
| 1 | | | |
| Tile 1 x 2 with Groove | Dark Red
| 2 | | | |
| Tile 1 x 4 with Groove | Dark Red
| 2 | | | |
| Slope Curved 4 x 2 No Studs | Dark Red
| 1 | | | |
| Plate 1 x 6 | Dark Red
| 3 | | | |
| Brick 1 x 4 without Bottom Tubes | Trans-Brown
| 1 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Dark Red
| 2 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Black
| 6 | | | |
| Plate Round 1 x 1 with Open Stud | Light Bluish Gray
| 5 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Black
| 3 | | | |
| Tile 1 x 2 with Groove | Yellow
| 3 | | | |
| Wedge Plate 4 x 2 Left | Light Bluish Gray
| 1 | | | |
| Plate 3 x 3 Cross | Black
| 2 | | | |
| Panel 1 x 1 x 1 Corner | Dark Bluish Gray
| 2 | | | |
| Wedge Plate 4 x 2 Right | Light Bluish Gray
| 1 | | | |
| Brick 2 x 4 | Dark Bluish Gray
| 1 | | | |
| Brick 1 x 6 | Dark Red
| 1 | | | |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | White
| 2 | | | |
| Tile 1 x 2 with Groove | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 | Black
| 3 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Reddish Brown
| 2 | | | |
| Wedge Sloped 4 x 2 Triple Right | Dark Bluish Gray
| 1 | | | |
| Wedge Sloped 4 x 2 Triple Left | Dark Bluish Gray
| 1 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 3 | | | |
| Plate 1 x 1 | Black
| 3 | | | |
| Plate 1 x 4 | Dark Tan
| 3 | | | |
| Technic Pin Connector Round 1L [Beam] | Black
| 3 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Tan
| 4 | | | |
| Brick Special 1 x 2 with Studs on 2 Sides | Black
| 1 | | | |
| Helmet, Standard | White
| 1 | | | |
| Plate 4 x 4 | Light Bluish Gray
| 1 | | | |
| Plate 1 x 8 | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Door Rail | Tan
| 2 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Red
| 3 | | | |
| Brick 2 x 2 Corner | Black
| 2 | | | |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | Trans-Brown
| 1 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Dark Red
| 1 | | | |
| Tile 1 x 3 | Black
| 1 | | | |
| Slope Inverted 45° 2 x 1 | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Dark Red
| 1 | | | |
| Plate 2 x 3 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 6 | Dark Orange
| 1 | | | |
| Tile Round 1 x 1 Quarter | Red
| 3 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Light Bluish Gray
| 3 | | | |
| Plate 2 x 6 | Dark Tan
| 2 | | | |
| Plate 1 x 4 | Dark Red
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Brown
| 3 | | | |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | Tan
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 | Yellow
| 1 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 4 | | | |
| Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | Black
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 2 Corner | Black
| 2 | | | |
| Plate 1 x 4 | Yellow
| 2 | | | |
| Tile Round 1 x 1 | Trans-Red
| 5 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 2 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Flat Silver
| 1 | | | |
| Plate 2 x 2 | Dark Bluish Gray
| 2 | | | |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Black
| 2 | | | |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | Dark Bluish Gray
| 2 | | | |
| Brick 1 x 4 | Green
| 1 | | | |
| Plate Special 1 x 2 with Pin Hole on Top | Black
| 2 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Tan
| 1 | | | |
| Steering Stand 1 x 2 with Black Steering Wheel | Black
| 2 | | | |
| Plate 2 x 2 Corner | Blue
| 2 | | | |
| Tile 1 x 4 with Groove | Black
| 1 | | | |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 1 Support Wall on Bottom | Dark Bluish Gray
| 1 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 3 | | | |
| Bracket 1 x 2 - 2 x 4 | Yellow
| 1 | | | |
| Brick 2 x 2 | Dark Bluish Gray
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Black
| 2 | | | |
| Wedge Plate 2 x 4 | Black
| 2 | | | |
| Wedge Plate 4 x 2 Left | Dark Red
| 1 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Dark Bluish Gray
| 2 | | | |
| Wedge Plate 4 x 2 Right | Dark Red
| 1 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Clear
| 1 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Clear
| 1 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Clear
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Black
| 2 | | | |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | White
| 1 | | | |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | Black
| 1 | | | |
| Plate 2 x 2 | Red
| 1 | | | |
| Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 2 | Orange
| 1 | | | |
| Panel 1 x 2 x 1 [Rounded Corners] | Yellow
| 1 | | | |
| Tool Screwdriver and Spanner / Wrench | Black
| 1 | | | |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | Black
| 1 | | | |