| Technic Rubber Belt Medium [26mm ID] [Round Cross Section] | Blue
| 2 | | | |
| Minifig Head Special, Spider Ham with Black Webs, White Eyes print | Red
| 1 | | | |
| Torso Bodysuit, Gold Spider Print, Red Arms, Pearl Gold Hands | Red
| 1 | | | |
| Minifig Head Iron Spider, Large Gold Eyes, and Black Lines Print | Red
| 1 | | | |
| Torso Muscles with Large White Spider Print (Venom), Black Arms and Hands | Black
| 1 | | | |
| Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | Flat Silver
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 with Black Tentacles Print | White
| 9 | | | |
| Hips with Blue Legs and Red Boots Pattern | Blue
| 1 | | | |
| Minifig Head Venom, White Eyes, White Teeth, Red Tongue Print [Hollow Stud] | Black
| 1 | | | |
| Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges] | Black
| 1 | | | |
| Torso Muscles, Blue Sides and Waist, Webbing, Black Spider Print (Spider-Man), Blue Arms, Red Hands | Red
| 1 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Black
| 8 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Black
| 8 | | | |
| Minifig Head Spider-Man, Large White Eyes, Dark Red Web Print | Red
| 1 | | | |
| Sticker Sheet for Set 76151-1 | [No Color/Any Color]
| 1 | | | |
| Tyre 43.2 x 26 Balloon Small | Black
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Black
| 9 | | | |
| Tile 2 x 2 Corner | Black
| 6 | | | |
| Arm Skeleton [Bent / 2 Clips] | Black
| 7 | | | |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | White
| 7 | | | |
| Hips and Black Legs | Black
| 1 | | | |
| Technic Pin with Friction Ridges Lengthwise and Towball | Red
| 9 | | | |
| Tile Round 1 x 1 Quarter | Black
| 17 | | | |
| Wedge Curved 4 x 4 No Top Studs | White
| 1 | | | |
| Minifig Neckwear Backplate with 4 Bars | Black
| 1 | | | |
| Minifig Neckwear Backplate with 4 Bars | Black
| 1 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Red
| 8 | | | |
| Hips and Red Legs | Red
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Black
| 9 | | | |
| Minifig Neckwear Bracket [One Stud] - Reinforced | Black
| 2 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Light Bluish Gray
| 15 | | | |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Dark Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 5.9mm Centre Side Cup | Dark Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Black
| 10 | | | |
| Creature Body Part, Barb Large (Claw, Talon) with Clip | Black
| 6 | | | |
| Slope Curved 2 x 1 Inverted | Dark Bluish Gray
| 4 | | | |
| Bracket 1 x 2 - 2 x 2 | White
| 8 | | | |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | Tan
| 9 | | | |
| Large Figure Weapon Claw, with Clip | Pearl Gold
| 4 | | | |
| Leg Skeleton | White
| 2 | | | |
| Arm Skeleton [Bent / 2 Clips] | Black
| 4 | | | |
| Grille Bar 1 x 4 x 1 2/3 Bull Bar, Rounded | Black
| 3 | | | |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside | Trans-Clear
| 3 | | | |
| Projectile, Arrow with Shaft, Hollow Black Rubber End | Light Bluish Gray
| 1 | | | |
| Technic Pin Connector Round [Slotted] | Red
| 5 | | | |
| Wedge Plate 2 x 2 Left | Black
| 3 | | | |
| Brick Special 1 x 2 with Studs on 2 Sides | White
| 2 | | | |
| Torso - Skeleton Thick Shoulder Pins | White
| 1 | | | |
| Wedge Curved 4 x 3 No Studs [Plain] | White
| 2 | | | |
| Plate Special 1 x 8 with Door Rail | Red
| 2 | | | |
| Plate 1 x 2 | White
| 8 | | | |
| Wedge Plate 2 x 2 Right | Black
| 3 | | | |
| Minifig Head Skeleton, Standard Skull Print | White
| 1 | | | |
| Technic Beam 1 x 5 Thick | Blue
| 4 | | | |
| Plate 2 x 4 | Black
| 6 | | | |
| Legs Short | Blue
| 1 | | | |
| Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Short Tip) | Black
| 2 | | | |
| Slope Curved 3 x 1 No Studs | White
| 4 | | | |
| Tile Special 2 x 3 Pentagonal | Blue
| 3 | | | |
| Tile Round 1 x 1 Quarter | White
| 9 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Black
| 6 | | | |
| Slope Curved 4 x 1 Double with No Studs | Red
| 4 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Dark Bluish Gray
| 4 | | | |
| Plate 2 x 10 | Red
| 2 | | | |
| Technic Ball Joint with Through Axle Hole | Black
| 2 | | | |
| Slope Curved 4 x 1 Double with No Studs | Black
| 4 | | | |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | Black
| 2 | | | |
| Technic Gear 12 Tooth Bevel | Tan
| 4 | | | |
| Plate 1 x 8 | Black
| 2 | | | |
| Food Hot Dog Bun | Tan
| 1 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | White
| 2 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Blue
| 2 | | | |
| Brick 2 x 4 | Black
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Red
| 13 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | White
| 2 | | | |
| Brick 2 x 3 | Black
| 2 | | | |
| Slope Curved 4 x 2 No Studs | Black
| 2 | | | |
| Crown / Flower / Egg Shell Half | White
| 2 | | | |
| Arm Skeleton Bent with Clips at 90° [Vertical Grip] | White
| 2 | | | |
| Wedge Curved 6 x 4 Triple | Black
| 2 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Red
| 4 | | | |
| Plate 4 x 10 | Dark Bluish Gray
| 1 | | | |
| Slope Curved 2 x 2 with Lip, No Studs | Black
| 4 | | | |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | Light Bluish Gray
| 3 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | White
| 5 | | | |
| Launcher, Brick Special 2 x 6 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 1 with Tooth | Tan
| 4 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Black
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Black
| 2 | | | |
| Slope Curved 4 x 1 Inverted | White
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Light Bluish Gray
| 2 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Black
| 2 | | | |
| Plate Special 1 x 2 with Pin Hole on Top | Blue
| 2 | | | |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | Tan
| 1 | | | |
| Tile 2 x 2 Corner | White
| 2 | | | |
| Tile 2 x 2 Curved, Macaroni | White
| 2 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Red
| 6 | | | |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | Blue
| 2 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Flat Silver
| 2 | | | |
| Plate 1 x 6 | White
| 2 | | | |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | White
| 6 | | | |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | Dark Bluish Gray
| 4 | | | |
| Bar Holder with Hole and Bar Handle | Black
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Blue
| 2 | | | |
| Plate Special 3 x 2 with Rounded End, Hole | Black
| 2 | | | |
| Slope Curved 3 x 2 No Studs | Black
| 1 | | | |
| Cone 1 x 1 [Top Groove] | Flat Silver
| 6 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Tan
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Red
| 2 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Dark Bluish Gray
| 4 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Red
| 3 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 11 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 6 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Blue
| 1 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Blue
| 1 | | | |
| Arm Skeleton Bent with Clips at 90° [Vertical Grip] | Light Bluish Gray
| 1 | | | |
| Hinge Plate 1 x 4 Locking Dual 1 Finger | White
| 1 | | | |
| Wedge Plate 4 x 2 Left | White
| 2 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Black
| 2 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Dark Bluish Gray
| 4 | | | |
| Tile Special 2 x 3 Pentagonal | White
| 1 | | | |
| Plate Round 1 x 1 with Open Stud | White
| 5 | | | |
| Brick Special 1 x 1 with Studs on 2 Sides | Black
| 1 | | | |
| Slope Curved 3 x 1 No Studs | Red
| 2 | | | |
| Tile Round 1 x 1 Half Circle | Red
| 2 | | | |
| Food Hot Dog / Sausage | Red
| 2 | | | |
| Bracket 1 x 1 - 1 x 1 | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 1 with Vertical Tooth | White
| 4 | | | |
| Plate 1 x 1 | Blue
| 3 | | | |
| Bracket 1 x 2 - 1 x 2 | Black
| 2 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Blue
| 2 | | | |
| Wedge Plate 4 x 2 Right | White
| 2 | | | |
| Plate Special 1 x 1 Rounded with Handle | Light Bluish Gray
| 1 | | | |
| Food Egg with 1.5mm Hole [Plain] | White
| 1 | | | |
| Plate Round Corner 3 x 3 | Black
| 2 | | | |
| Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole | Red
| 1 | | | |
| Plate Special 1 x 2 with 5.9mm End Cup and Towball | Dark Bluish Gray
| 2 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 5 | | | |
| Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | White
| 2 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 5 | | | |
| Technic Axle 5 with Stop | Reddish Brown
| 4 | | | |
| Technic Pin Connector 3L with 2 Pins and Center Hole | Black
| 2 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | White
| 2 | | | |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | Tan
| 2 | | | |
| Wedge Curved 3 x 4 x 2/3 Cutout | Blue
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 [Open O Top Clip] | Black
| 6 | | | |
| Brick 1 x 2 | Black
| 2 | | | |
| Brick 1 x 2 | Red
| 3 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 4 | | | |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | Black
| 2 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 4 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Red
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 3 | | | |
| Plate 1 x 3 | White
| 2 | | | |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | Tan
| 2 | | | |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Black
| 4 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Red
| 3 | | | |
| Plate 1 x 4 | Black
| 2 | | | |
| Brick 2 x 3 | Dark Bluish Gray
| 1 | | | |
| Equipment Medical Syringe with 2 Holes | Lime
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | White
| 2 | | | |
| Plate Special 1 x 2 5.9mm End Cup | Light Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Black
| 4 | | | |
| Plate Round Corners 2 x 6 Double | Red
| 1 | | | |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | Dark Bluish Gray
| 2 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | White
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Blue
| 3 | | | |
| Plate Special 1 x 1 with Tooth | White
| 3 | | | |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | Black
| 2 | | | |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Black
| 3 | | | |
| Engine / Air Scoop 2 x 2 | Flat Silver
| 2 | | | |
| Plate Special 1 x 2 with Angled Handles on Side | Black
| 2 | | | |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | Black
| 2 | | | |
| Slope Curved 2 x 1 Inverted | Black
| 1 | | | |
| Slope Curved 4 x 1 Double with No Studs | White
| 1 | | | |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Black
| 2 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Plate Special 1 x 2 [Open O Top Clip] | Red
| 2 | | | |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | Black
| 2 | | | |
| Tile Round 2 x 2 with Bottom Stud Holder | Black
| 2 | | | |
| Technic Plate 2 x 4 [3 Holes] | Black
| 2 | | | |
| Plate 2 x 6 | Red
| 1 | | | |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | Red
| 1 | | | |
| Plate 2 x 8 | Blue
| 1 | | | |
| Wedge Plate 2 x 2 Left | Dark Bluish Gray
| 1 | | | |
| Wedge Plate 2 x 2 Right | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 3 | White
| 1 | | | |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | Black
| 4 | | | |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | Black
| 1 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Red
| 2 | | | |
| Wedge Plate 3 x 2 Left | White
| 1 | | | |
| Handlebars with Angular Handles | Light Bluish Gray
| 2 | | | |
| Plate 2 x 2 | Red
| 2 | | | |
| Wedge Curved 3 x 4 x 2/3 Cutout | White
| 1 | | | |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | Red
| 1 | | | |
| Dish 2 x 2 Inverted [Radar] | Black
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Red
| 2 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Dark Bluish Gray
| 1 | | | |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] | Dark Bluish Gray
| 2 | | | |
| Wedge Curved Inverted 6 x 4 | Black
| 2 | | | |
| Wedge Plate 3 x 2 Right | White
| 1 | | | |
| Plate 1 x 1 | Trans-Red
| 3 | | | |
| Plate Special 1 x 2 [Side Handle Closed Ends] | Black
| 2 | | | |
| Plate 1 x 2 | Tan
| 2 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | White
| 2 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Tan
| 2 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | Light Bluish Gray
| 2 | | | |
| Bar Holder with Clip | Black
| 1 | | | |
| Tile 1 x 2 with Groove | Black
| 1 | | | |
| Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | Black
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | White
| 2 | | | |
| Brick 1 x 1 | Blue
| 2 | | | |
| Bracket 2 x 2 - 2 x 2 | Light Bluish Gray
| 1 | | | |
| Plate 2 x 4 | Red
| 1 | | | |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 3 | Black
| 1 | | | |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | Black
| 2 | | | |
| Plate 1 x 4 | Tan
| 1 | | | |
| Slope Inverted 45° 2 x 1 | Blue
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on Side | Black
| 2 | | | |
| Tile 1 x 2 with Groove | Red
| 1 | | | |
| Plate Round Corner 4 x 4 | Dark Tan
| 1 | | | |
| Plate 1 x 4 | Blue
| 1 | | | |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | Black
| 1 | | | |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | Black
| 1 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Black
| 1 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Orange
| 3 | | | |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | Red
| 1 | | | |
| Brick Round 2 x 2 with Axle Hole | Red
| 1 | | | |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | Dark Bluish Gray
| 1 | | | |
| Plate Special 2 x 2 with Towball and Hole | Black
| 2 | | | |
| Arm Mechanical with Clip [Thick Support] | Flat Silver
| 1 | | | |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | White
| 1 | | | |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | Light Bluish Gray
| 1 | | | |
| Plate 2 x 2 | Blue
| 1 | | | |
| Plate Special 2 x 2 with 2 Pin Holes | Black
| 1 | | | |
| Plate Special 1 x 2 [Side Handle Closed Ends] | Blue
| 1 | | | |
| Slope Inverted 45° 4 x 2 Double | Black
| 1 | | | |
| Cone 1 x 1 [Top Groove] | Black
| 1 | | | |
| Steering Stand 1 x 2 with Black Steering Wheel | Blue
| 1 | | | |
| Technic Axle 4 with Stop | Dark Bluish Gray
| 1 | | | |