![Image of part Large Figure Shoulder Cover, Armor, Round, Smooth [Plain]](https://cdn.rebrickable.com/media/parts/elements/6133556.jpg) | Large Figure Shoulder Cover, Armor, Round, Smooth [Plain]   | Black
| 2 | $3.06 | $6.11 | |
 | Slope 45° 2 x 2 Double Concave | Black
| 6 | $0.56 | $3.33 | |
 | Plate Special 1 x 1 Rounded with Handle | Black
| 14 | $0.15 | $2.07 | |
 | Slope Inverted 45° 2 x 2 Double Convex | Black
| 2 | $0.87 | $1.74 | |
 | Slope Curved 2 x 1 Inverted | Black
| 10 | $0.17 | $1.67 | |
 | Plate 1 x 2 | White
| 19 | $0.07 | $1.41 | |
 | Wedge Sloped 45° 2 x 2 Corner | Black
| 4 | $0.33 | $1.33 | |
 | Brick Arch 1 x 3 x 2 Curved Top | Blue
| 2 | $0.61 | $1.22 | |
 | Slope Curved 2 x 2 x 2/3 | Black
| 12 | $0.09 | $1.11 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs | Black
| 10 | $0.11 | $1.11 | |
 | Plate 2 x 4 | Black
| 10 | $0.11 | $1.11 | |
 | Slope Inverted 75° 2 x 1 x 3 | Black
| 2 | $0.52 | $1.04 | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Metallic Silver
| 3 | $0.31 | $0.94 | |
 | Slope Curved 2 x 2 x 2/3 | Blue
| 4 | $0.22 | $0.89 | |
 | Bracket 1 x 2 - 2 x 4 | Black
| 8 | $0.11 | $0.89 | |
 | Plate Round 1 x 1 with Solid Stud | Trans-Light Blue
| 16 | $0.06 | $0.89 | |
 | Plate Special 2 x 3 with Rocks | Black
| 8 | $0.11 | $0.89 | |
 | Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Short Tip) | Black
| 3 | $0.28 | $0.83 | |
 | Sports Surfboard Standard | White
| 1 | $0.81 | $0.81 | |
 | Bar Holder with Clip | Black
| 6 | $0.13 | $0.78 | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/4522034.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Black
| 6 | $0.13 | $0.78 | |
 | Tile 2 x 3 | Black
| 3 | $0.26 | $0.78 | |
 | Plate 2 x 3 | Black
| 7 | $0.11 | $0.78 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | White
| 20 | $0.04 | $0.74 | |
 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | Black
| 2 | $0.37 | $0.74 | |
 | Bar Holder with Hole and Bar Handle | Light Bluish Gray
| 4 | $0.19 | $0.74 | |
![Image of part Spoiler 2 x 4 with Handle [Plain]](https://cdn.rebrickable.com/media/parts/elements/6131830.jpg) | Spoiler 2 x 4 with Handle [Plain] | White
| 2 | $0.35 | $0.70 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole] | Black
| 6 | $0.11 | $0.67 | |
 | Wedge 2 x 2 Facet | Red
| 4 | $0.17 | $0.67 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://cdn.rebrickable.com/media/parts/elements/6052126.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] | Black
| 6 | $0.11 | $0.67 | |
 | Plate 1 x 4 | Dark Bluish Gray
| 6 | $0.11 | $0.67 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | Blue
| 5 | $0.13 | $0.65 | |
 | Plate 1 x 1 | Black
| 7 | $0.09 | $0.65 | |
 | Technic Brick Special 2 x 2 with 10.2mm Balls with Holes and Axle Hole | Black
| 1 | $0.63 | $0.63 | |
 | Wave / Flame Rounded Single with Pin | Black
| 3 | $0.20 | $0.61 | |
 | Plate Round 1 x 1 with Solid Stud | Black
| 11 | $0.06 | $0.61 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 8 | $0.07 | $0.59 | |
 | Bracket 1 x 2 - 2 x 2 | Dark Bluish Gray
| 8 | $0.07 | $0.59 | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/6276867.jpg) | Arm Mechanical with Clip [Thick Support] | Black
| 8 | $0.07 | $0.59 | |
 | Insect Accessory, Spider Head and Legs | Flat Silver
| 2 | $0.30 | $0.59 | |
 | Wedge Plate 2 x 2 Cut Corner | Black
| 4 | $0.15 | $0.59 | |
 | Bracket 1 x 2 - 2 x 2 | Black
| 6 | $0.09 | $0.56 | |
 | Slope 30° 1 x 2 x 2/3 | Black
| 6 | $0.09 | $0.56 | |
 | Plate 2 x 2 Corner | Black
| 6 | $0.09 | $0.56 | |
 | Plate 1 x 2 | Dark Bluish Gray
| 6 | $0.09 | $0.56 | |
 | Weapon Spear Tip with Fins | White
| 3 | $0.19 | $0.56 | |
 | Plate Round 1 x 1 with Open Stud | Dark Bluish Gray
| 5 | $0.11 | $0.56 | |
 | Bracket 1 x 2 - 2 x 4 | Lime
| 2 | $0.24 | $0.48 | |
 | Brick Special 1 x 1 with Stud on 1 Side | Black
| 2 | $0.24 | $0.48 | |
 | Slope Curved 3 x 1 No Studs | Blue
| 2 | $0.24 | $0.48 | |
 | Plate 2 x 2 | Dark Bluish Gray
| 6 | $0.07 | $0.44 | |
 | Slope 45° 2 x 1 with Bottom Pin | Black
| 6 | $0.07 | $0.44 | |
 | Slope Curved 2 x 1 with Stud Notch Right | White
| 2 | $0.22 | $0.44 | |
 | Brick 1 x 4 | Black
| 2 | $0.22 | $0.44 | |
 | Brick 2 x 4 | White
| 2 | $0.22 | $0.44 | |
 | Slope Curved 2 x 1 with Stud Notch Left | White
| 2 | $0.22 | $0.44 | |
 | Wedge Sloped 18° 4 x 4 Corner | Black
| 2 | $0.22 | $0.44 | |
 | Slope Curved 2 x 2 x 2/3 Inverted | White
| 2 | $0.22 | $0.44 | |
 | Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole | Black
| 4 | $0.11 | $0.44 | |
 | Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray
| 4 | $0.11 | $0.44 | |
 | Plate Special 1 x 2 with End Towball | Dark Bluish Gray
| 4 | $0.11 | $0.44 | |
 | Large Figure Shoulder Cover, Armor, Round, Smooth with White Venom Spots | Black
| 1 | $0.43 | $0.43 | |
 | Slope Curved 3 x 2 No Studs | Red
| 1 | $0.43 | $0.43 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 11 | $0.04 | $0.41 | |
 | Tile 2 x 2 with Groove | Black
| 2 | $0.20 | $0.41 | |
 | Slope Curved 3 x 1 No Studs | Black
| 2 | $0.20 | $0.41 | |
 | Brick 2 x 4 | Green
| 2 | $0.20 | $0.41 | |
 | Web Effect Two Branches Bars on Each End | White
| 2 | $0.20 | $0.41 | |
 | Web Effect Long and Narrow Bars at Both Ends | White
| 2 | $0.20 | $0.41 | |
 | Plate 2 x 2 Corner | Dark Bluish Gray
| 4 | $0.09 | $0.37 | |
 | Plate 2 x 2 | Dark Azure
| 4 | $0.09 | $0.37 | |
 | Brick Special 1 x 4 with 4 Studs on One Side | Black
| 2 | $0.19 | $0.37 | |
 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | Dark Bluish Gray
| 4 | $0.09 | $0.37 | |
 | Technic Pin Connector Round with 4 Clips | Black
| 1 | $0.35 | $0.35 | |
 | Web Effect Small Short Bar on Front and Back | White
| 2 | $0.17 | $0.33 | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598528.jpg) | Plate Special 1 x 2 [Top Clip] | Black
| 6 | $0.06 | $0.33 | |
 | Tile Special 2 x 3 Pentagonal | Blue
| 2 | $0.17 | $0.33 | |
 | Plate 2 x 8 | Blue
| 2 | $0.17 | $0.33 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Blue
| 2 | $0.17 | $0.33 | |
 | Tile 1 x 4 with Groove | Red
| 2 | $0.17 | $0.33 | |
![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/4650645.jpg) | Brick Round 2 x 2 [Grill] | Light Bluish Gray
| 2 | $0.15 | $0.30 | |
 | Wedge Plate 2 x 2 Left | Blue
| 1 | $0.30 | $0.30 | |
 | Slope 45° 2 x 2 | Black
| 2 | $0.15 | $0.30 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Blue
| 2 | $0.15 | $0.30 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6208446.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Flat Silver
| 2 | $0.15 | $0.30 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | White
| 2 | $0.15 | $0.30 | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366026.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | Black
| 2 | $0.15 | $0.30 | |
 | Brick Special 1 x 1 Studs on 4 Sides | Black
| 1 | $0.30 | $0.30 | |
 | Plate Round 1 x 1 with Hollow Stud and Bar on Underside | Trans-Clear
| 2 | $0.15 | $0.30 | |
 | Wedge Plate 2 x 2 Right | Blue
| 1 | $0.28 | $0.28 | |
 | Plate 1 x 3 | Blue
| 2 | $0.13 | $0.26 | |
 | Slope Curved 4 x 1 Inverted | Red
| 2 | $0.13 | $0.26 | |
 | Plate 2 x 2 Corner | Light Bluish Gray
| 2 | $0.13 | $0.26 | |
 | Bar Holder with Clip | White
| 2 | $0.13 | $0.26 | |
 | Plate Special 4 x 4 with 2 x 2 Opening | Dark Bluish Gray
| 2 | $0.13 | $0.26 | |
 | Plate 2 x 6 | Dark Bluish Gray
| 2 | $0.13 | $0.26 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet | Black
| 2 | $0.13 | $0.26 | |
 | Web Effect Medium Bar on Back | White
| 1 | $0.24 | $0.24 | |
 | Wedge Curved 6 x 2 Right, Inner Ridges | Black
| 1 | $0.24 | $0.24 | |
 | Slope 18° 4 x 2 | Black
| 1 | $0.24 | $0.24 | |
 | Plate 1 x 1 | Dark Turquoise
| 3 | $0.07 | $0.22 | |
 | Tile 1 x 6 with Groove | Blue
| 1 | $0.22 | $0.22 | |
 | Plate 1 x 2 | Dark Turquoise
| 4 | $0.06 | $0.22 | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye | Trans-Light Blue
| 2 | $0.11 | $0.22 | |
 | Plate Round 1 x 1 with Open Stud | White
| 4 | $0.06 | $0.22 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Bluish Gray
| 4 | $0.06 | $0.22 | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | Red
| 4 | $0.06 | $0.22 | |
 | Launcher, Weapon Gun / Blaster / Shooter Mini | Black
| 2 | $0.11 | $0.22 | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket | Light Bluish Gray
| 4 | $0.06 | $0.22 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Black
| 4 | $0.06 | $0.22 | |
 | Slope Curved 4 x 1 Double with No Studs | Black
| 2 | $0.11 | $0.22 | |
 | Wedge Plate 2 x 2 Cut Corner | White
| 2 | $0.11 | $0.22 | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4211599.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Light Bluish Gray
| 4 | $0.06 | $0.22 | |
 | Tile Special 1 x 2 with Two Vertical Teeth / Tooth | White
| 4 | $0.06 | $0.22 | |
 | Brick Curved 2 x 2, Two Top Studs | Black
| 2 | $0.11 | $0.22 | |
 | Plate 2 x 3 | Red
| 2 | $0.11 | $0.22 | |
 | Brick Arch 1 x 3 x 2 | Red
| 2 | $0.11 | $0.22 | |
 | Plate 1 x 8 | White
| 1 | $0.20 | $0.20 | |
 | Slope Curved 4 x 2 No Studs | Black
| 1 | $0.20 | $0.20 | |
 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole | Red
| 1 | $0.20 | $0.20 | |
 | Web Effect Large Bar on Back Handles on Sides | White
| 1 | $0.20 | $0.20 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254021.jpg) | Plate Special 1 x 2 Side Handle [Free Ends] | Red
| 5 | $0.04 | $0.19 | |
![Image of part Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side]](https://cdn.rebrickable.com/media/parts/elements/6187578.jpg) | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | Black
| 2 | $0.09 | $0.19 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6034044.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | White
| 2 | $0.09 | $0.19 | |
 | Slope Curved 2 x 2 with Lip, No Studs | Black
| 2 | $0.09 | $0.19 | |
 | Brick and Axle Separator v2.0 | Orange
| 1 | $0.19 | $0.19 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Black
| 2 | $0.09 | $0.19 | |
 | Plate Special 1 x 2 with Angled Handles on Side | Black
| 2 | $0.09 | $0.19 | |
 | Wedge Curved 6 x 2 Left, Inner Ridges | Black
| 1 | $0.19 | $0.19 | |
 | Technic Brick 1 x 1 with Pin Hole | Red
| 2 | $0.09 | $0.19 | |
![Image of part Wedge Curved 4 x 3 No Studs [Plain]](https://cdn.rebrickable.com/media/parts/elements/6009018.jpg) | Wedge Curved 4 x 3 No Studs [Plain] | Black
| 2 | $0.09 | $0.19 | |
 | Wedge Plate 8 x 3, 22° Right | Black
| 2 | $0.09 | $0.19 | |
 | Brick 1 x 2 | Dark Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Wedge Plate 8 x 3, 22° Left | Black
| 2 | $0.09 | $0.19 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | Black
| 2 | $0.09 | $0.19 | |
 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Web Effect Handcuffs | White
| 1 | $0.17 | $0.17 | |
 | Tile Round 1 x 1 with Hollow Bar | Red
| 3 | $0.06 | $0.17 | |
 | Tile 1 x 4 with Groove | Black
| 1 | $0.17 | $0.17 | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289542.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Dark Bluish Gray
| 3 | $0.06 | $0.17 | |
 | Tile Round 1 x 1 Quarter | Red
| 3 | $0.06 | $0.17 | |
 | Tile Round 1 x 1 Quarter | White
| 3 | $0.06 | $0.17 | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4644456.jpg) | Brick Special 1 x 2 Palisade [aka Log] | Black
| 3 | $0.06 | $0.17 | |
 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | Red
| 1 | $0.17 | $0.17 | |
 | Lever Small Base with Black Lever | Black
| 3 | $0.06 | $0.17 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole] | Light Bluish Gray
| 2 | $0.07 | $0.15 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Blue
| 2 | $0.07 | $0.15 | |
 | Slope Curved 4 x 1 Inverted | Black
| 2 | $0.07 | $0.15 | |
![Image of part Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]](https://cdn.rebrickable.com/media/parts/elements/4227395.jpg) | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] | Dark Bluish Gray
| 2 | $0.07 | $0.15 | |
 | Slope Inverted 45° 2 x 1 | Black
| 2 | $0.07 | $0.15 | |
 | Brick 1 x 2 | Medium Azure
| 2 | $0.07 | $0.15 | |
 | Wedge Plate 4 Stud 45° Angle Plate | Dark Bluish Gray
| 4 | $0.04 | $0.15 | |
 | Wheel Arch, Curved Wedge 4 x 3 with 2 x 2 Opening and 4 Studs | Red
| 2 | $0.07 | $0.15 | |
 | Bracket 1 x 2 - 2 x 2 | Red
| 2 | $0.07 | $0.15 | |
 | Plate 2 x 6 | Red
| 1 | $0.15 | $0.15 | |
 | Plate 2 x 2 | Sand Blue
| 1 | $0.13 | $0.13 | |
 | Brick Special 1 x 2 x 2/3 with Studs on Sides | Black
| 1 | $0.13 | $0.13 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | White
| 3 | $0.04 | $0.11 | |
 | Lever Small Base with Black Lever | Light Bluish Gray
| 3 | $0.04 | $0.11 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | White
| 3 | $0.04 | $0.11 | |
 | Tile Round 1 x 1 Quarter | Magenta
| 3 | $0.04 | $0.11 | |
 | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | Blue
| 3 | $0.04 | $0.11 | |
 | Plate 1 x 6 | Yellow
| 1 | $0.11 | $0.11 | |
 | Technic Pin Long without Friction Ridges | Tan
| 2 | $0.06 | $0.11 | |
 | Plate Special 2 x 2 with Only 2 studs | Black
| 1 | $0.11 | $0.11 | |
 | Plate Round 1 x 1 Swirled Top | Bright Pink
| 2 | $0.06 | $0.11 | |
 | Plate 2 x 2 | Reddish Brown
| 2 | $0.06 | $0.11 | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515368.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends] | Black
| 2 | $0.06 | $0.11 | |
 | Wedge Plate 4 x 4 Cut Corner | Black
| 2 | $0.06 | $0.11 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Blue
| 2 | $0.06 | $0.11 | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball | Dark Bluish Gray
| 2 | $0.06 | $0.11 | |
 | Wedge Plate 4 x 4 with 2 x 2 Cutout | Black
| 2 | $0.06 | $0.11 | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | Black
| 2 | $0.06 | $0.11 | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/4649224.jpg) | Arm Mechanical with Clip [Thick Support] | White
| 2 | $0.06 | $0.11 | |
 | Plate Special 1 x 2 5.9mm Towball Socket | Light Bluish Gray
| 2 | $0.06 | $0.11 | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | Blue
| 2 | $0.06 | $0.11 | |
 | Bracket 3 x 2 x 1 1/3 with Pin Bottom | Red
| 1 | $0.09 | $0.09 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://cdn.rebrickable.com/media/parts/elements/6248962.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] | Sand Blue
| 1 | $0.09 | $0.09 | |
 | Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone) | Tan
| 1 | $0.09 | $0.09 | |
 | Brick 2 x 2 | Yellow
| 1 | $0.09 | $0.09 | |
 | Wedge Plate 3 x 6 Cut Corners | Red
| 1 | $0.07 | $0.07 | |
 | Plate 1 x 4 | Medium Azure
| 1 | $0.07 | $0.07 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Red
| 1 | $0.07 | $0.07 | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408121.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | Red
| 1 | $0.07 | $0.07 | |
 | Slope Inverted 45° 6 x 2 Double with 2 x 4 Recessed | Black
| 1 | $0.07 | $0.07 | |
 | Plate Round 1 x 1 with Solid Stud | Trans-Red
| 2 | $0.04 | $0.07 | |
 | Wheel Arch, Curved Wedge 4 x 3 with 2 x 2 Opening and 4 Studs | Black
| 1 | $0.07 | $0.07 | |
 | Technic Axle 3 | Yellow
| 2 | $0.04 | $0.07 | |
 | Launcher Trigger, Weapon Gun Trigger | Dark Bluish Gray
| 4 | $0.02 | $0.07 | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed | Black
| 1 | $0.06 | $0.06 | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6014616.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | Red
| 1 | $0.06 | $0.06 | |
 | Technic Brick Special 2 x 2 with Pin Hole, with 2 Rotation Joint Sockets | Black
| 1 | $0.06 | $0.06 | |
 | Launcher, Plate Special 1 x 2 with Mini Blaster | Black
| 1 | $0.04 | $0.04 | |
 | Wave / Flame Rounded with Base Rim | Trans-Orange
| 1 | $0.04 | $0.04 | |
