| Wheel 18 x 12 with Axle Hole and Stud | Black
| 4 | | | |
| Wheel Cover 10 Spoke (2 Spokes each parallel) - for Wheel 18976 | Black
| 4 | | | |
| Wheel Cover 10 Spoke Y Shape - for Wheel 18976 | Black
| 4 | | | |
| Wheel Arch, Mudguard 4 x 2 1/2 x 2 1/3 | White
| 4 | | | |
| Tyre 24 x 12 Low Profile | Black
| 8 | | | |
| Slope Curved 4 x 2 No Studs | Lime
| 3 | | | |
| Plate 1 x 1 | Black
| 14 | | | |
| Hips and White Legs | White
| 1 | | | |
| Hips and White Legs | White
| 1 | | | |
| Torso Jacket with Lime Shoulders with Zipper and Lime Pockets Print, Lime Arms, Yellow Hands | Black
| 1 | | | |
| Plate 4 x 8 | Light Bluish Gray
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 | White
| 5 | | | |
| Slope Curved 4 x 2 No Studs | White
| 2 | | | |
| Plate 2 x 2 Corner | Blue
| 12 | | | |
| Hips and Dark Blue Legs | Dark Blue
| 1 | | | |
| Minifig Head, Glasses with Silver Frames, Brown Eyebrows, Eyelashes, Pink Lips, Open Mouth Smile Print | Yellow
| 1 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Black
| 4 | | | |
| Minifig Head, Black Eyebrows, Thin Grin, Eyes with White Pupils Print [Hollow Stud] | Yellow
| 1 | | | |
| Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top with Raised Inside Support | Black
| 1 | | | |
| Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes | Light Bluish Gray
| 4 | | | |
| Plate 1 x 2 | Tan
| 11 | | | |
| Tile 2 x 4 with Groove | White
| 3 | | | |
| Minifig Head, Eyebrows, Open Mouth Smile, with Teeth | Yellow
| 1 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Black
| 6 | | | |
| Plate 2 x 4 | White
| 4 | | | |
| Plate 1 x 6 | Black
| 5 | | | |
| Windscreen 5 x 4 x 1 1/3 | Trans-Brown
| 1 | | | |
| Panel 1 x 1 x 1 Corner | Dark Bluish Gray
| 4 | | | |
| Slope 18° 4 x 1 | Light Bluish Gray
| 2 | | | |
| Hat / Cap Short Curved Peak | White
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Lime
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 | Red
| 4 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Blue
| 8 | | | |
| Plate 2 x 10 | Light Bluish Gray
| 2 | | | |
| Arm Skeleton [Bent / 2 Clips] | Black
| 3 | | | |
| Tile 1 x 6 with Groove | Black
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Black
| 6 | | | |
| Technic Brick 1 x 2 [2 Pin Holes] | White
| 4 | | | |
| Brick Special 2 x 4 x 1 1/3 with Pin Holes and 2 x 2 Recessed | Dark Bluish Gray
| 2 | | | |
| Brick 1 x 12 | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Black
| 4 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 5 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Black
| 2 | | | |
| Fence Lattice 1 x 4 x 1 | Black
| 3 | | | |
| Plate Round Corners 2 x 6 Double | Black
| 3 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Lime
| 2 | | | |
| Spoiler, Plate Special 1 x 2 | Black
| 1 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Red
| 4 | | | |
| Brick 1 x 2 | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Black
| 4 | | | |
| Plate 4 x 6 | Black
| 1 | | | |
| Tile 1 x 1 with Groove | Lime
| 6 | | | |
| Plate 2 x 2 | Red
| 5 | | | |
| Helmet, Standard | Black
| 1 | | | |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | Lime
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Lime
| 7 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Black
| 2 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Black
| 4 | | | |
| Tile 2 x 4 with Groove | Black
| 1 | | | |
| Vehicle Base 4 x 10 x 2/3 with 4 x 2 Recessed Center with Smooth Underside | Black
| 1 | | | |
| Plate 1 x 1 | White
| 5 | | | |
| Slope Curved 3 x 1 No Studs | Lime
| 4 | | | |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Black
| 4 | | | |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | Black
| 2 | | | |
| Plate 1 x 3 | Black
| 2 | | | |
| Plate 1 x 2 | Black
| 4 | | | |
| Tile 1 x 1 with Groove | Black
| 3 | | | |
| Plate 1 x 12 | White
| 1 | | | |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | Reddish Brown
| 4 | | | |
| Tile 1 x 4 with Groove | Black
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | White
| 3 | | | |
| Brick 2 x 4 | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 4 with 2 Studs | Lime
| 2 | | | |
| Tile 1 x 3 | Lime
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | White
| 2 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Light Bluish Gray
| 2 | | | |
| Windscreen 3 x 4 x 1 1/3 Large Glass Surface | Trans-Brown
| 1 | | | |
| Hinge Brick 1 x 2 Top Plate Thin | Light Bluish Gray
| 1 | | | |
| Support 2 x 4 x 5 Stanchion Inclined [5mm wide posts] | White
| 1 | | | |
| Plate 1 x 4 | Yellow
| 3 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 3 | | | |
| Tile Round 1 x 1 Quarter | Lime
| 3 | | | |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | Black
| 2 | | | |
| Helmet, Standard | White
| 1 | | | |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | Tan
| 2 | | | |
| Plate 1 x 1 | Lime
| 3 | | | |
| Plate 2 x 3 | Yellow
| 3 | | | |
| Tile 1 x 2 with Groove | Black
| 2 | | | |
| Tile 1 x 1 with Groove | Yellow
| 3 | | | |
| Wedge Plate 3 x 2 Left | Light Bluish Gray
| 1 | | | |
| Tile 2 x 2 with Groove | Dark Bluish Gray
| 1 | | | |
| Technic Axle Pin without Friction Ridges Lengthwise | Tan
| 4 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | White
| 1 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 5 | | | |
| Wedge Plate 3 x 2 Right | Light Bluish Gray
| 1 | | | |
| Hinge Brick 1 x 2 Base | Black
| 1 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | White
| 1 | | | |
| Brick 1 x 4 | Black
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 2 | | | |
| Bar 3L | Black
| 2 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Lime
| 4 | | | |
| Plate 1 x 2 | Lime
| 5 | | | |
| Slope 45° 2 x 1 with Bottom Pin | Reddish Brown
| 2 | | | |
| Flag 2 x 2 Square, Flat Clip Edge [Thick Clips] | White
| 1 | | | |
| Slope 30° 1 x 2 x 2/3 | Lime
| 3 | | | |
| Tile 2 x 2 with Groove | Black
| 1 | | | |
| Brick 1 x 1 | White
| 2 | | | |
| Plate 2 x 4 | Lime
| 3 | | | |
| Brick 1 x 4 | White
| 1 | | | |
| Plate Round Corners 2 x 6 Double | Red
| 1 | | | |
| Plate Special 1 x 1 with Tooth | Trans-Orange
| 2 | | | |
| Technic Axle 7 | Light Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 Quarter | White
| 3 | | | |
| Brick 2 x 4 | Lime
| 1 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Yellow
| 2 | | | |
| Plate 2 x 2 Corner | Lime
| 2 | | | |
| Tile Round 1 x 1 Quarter | Light Bluish Gray
| 2 | | | |
| Plate 2 x 2 Corner | White
| 2 | | | |
| Tile 2 x 4 with Groove | Lime
| 1 | | | |
| Plate Special 1 x 1 with Tooth | Black
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Light Bluish Gray
| 3 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | White
| 2 | | | |
| Tile Round 1 x 1 | Trans-Clear
| 3 | | | |
| Wedge Curved 3 x 4 x 2/3 Cutout | White
| 1 | | | |
| Plate 4 x 4 | Lime
| 1 | | | |
| Technic Pin 1/2 | Light Bluish Gray
| 3 | | | |
| Panel 1 x 2 x 1 [Rounded Corners] | Black
| 2 | | | |
| Brick 1 x 2 | Red
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 3 | | | |
| Plate Special 1 x 2 [Side Handle Closed Ends] | Black
| 2 | | | |
| Brick 1 x 1 | Black
| 1 | | | |
| Plate 2 x 2 Corner | Light Bluish Gray
| 1 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Brown
| 2 | | | |
| Technic Beam 1 x 3 Thick | Black
| 1 | | | |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | Lime
| 2 | | | |
| Brick 2 x 2 | Black
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | White
| 2 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Black
| 2 | | | |
| Plate Special 4 x 4 with 2 x 2 Opening | Light Bluish Gray
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 2 | | | |
| Panel 1 x 2 x 1 [Rounded Corners] | Red
| 2 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Clear
| 1 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Clear
| 1 | | | |
| Tool Screwdriver and Spanner / Wrench | Flat Silver
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Black
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 1 | | | |
| Plate 1 x 1 | Yellow
| 2 | | | |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | Black
| 1 | | | |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners] | Red
| 1 | | | |
| Plate Special 1 x 2 with Door Rail | Light Bluish Gray
| 1 | | | |
| Plate Round Corners 2 x 6 Double | Lime
| 1 | | | |
| Slope 45° 2 x 2 | Red
| 1 | | | |
| Tile Round 1 x 1 | Trans-Orange
| 2 | | | |
| Bar 1 x 4 x 2 with Studs | Yellow
| 1 | | | |
| Steering Stand 1 x 2 with Black Steering Wheel | Black
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Yellow
| 1 | | | |
| Plate 2 x 2 | Black
| 1 | | | |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Red
| 1 | | | |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Light Bluish Gray
| 1 | | | |
| Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | Light Bluish Gray
| 1 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 2 | | | |
| Steering Stand 1 x 2 with Black Steering Wheel | Red
| 1 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Brown
| 1 | | | |
| Headwear Accessory Visor For Standard Helmet | Trans-Brown
| 1 | | | |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | Light Bluish Gray
| 1 | | | |
| Tile 1 x 2 with Groove | Lime
| 1 | | | |