 | Technic Axle and Pin Connector Angled #3 - 157.5°   | Lime
| 10 | $0.27 | $2.70 | |
 | Technic Axle and Pin Connector Angled #3 - 157.5° | White
| 10 | $0.26 | $2.57 | |
 | Wing, Right, Banshee, Large, Black and Dark Azure Scales, Dark Purple Trim Print | Trans-Clear
| 1 | $2.15 | $2.15 | |
 | Wing, Right, Banshee, Small, Black and Dark Azure Scales, Dark Purple Trim Print | Trans-Clear
| 1 | $2.15 | $2.15 | |
 | Wing, Left, Banshee, Small, Black and Dark Azure Scales, Dark Purple Trim Print | Trans-Clear
| 1 | $2.15 | $2.15 | |
 | Wing, Left, Banshee, Large, Black and Dark Azure Scales, Dark Purple Trim Print | Trans-Clear
| 1 | $2.15 | $2.15 | |
 | Wing, Right, Banshee, Large, Black and Dark Turquoise Scales, Yellow Trim Print | Trans-Clear
| 1 | $1.74 | $1.74 | |
 | Wing, Right, Banshee, Small, Black and Dark Turquoise Scales Print | Trans-Clear
| 1 | $1.74 | $1.74 | |
 | Wing, Left, Banshee, Large, Black and Dark Turquoise Scales, Yellow Trim Print | Trans-Clear
| 1 | $1.74 | $1.74 | |
 | Wing, Left, Banshee, Small, Black and Dark Turquoise Scales Print | Trans-Clear
| 1 | $1.74 | $1.74 | |
 | Plant, Carrot | Glow in Dark White
| 5 | $0.32 | $1.62 | |
 | Plant, Vine with Bar and Bar Hole | Black
| 4 | $0.41 | $1.62 | |
 | Technic Beam 1 x 2 Thin | Black
| 16 | $0.09 | $1.51 | |
 | Technic Axle 8 | Black
| 8 | $0.19 | $1.51 | |
 | Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | Black
| 34 | $0.04 | $1.38 | |
 | Technic Axle and Pin Connector Angled #1 | Lime
| 10 | $0.12 | $1.22 | |
 | Tile Round 1 x 1 Quarter | Trans-Light Blue
| 6 | $0.18 | $1.05 | |
 | Support Half Round 2 x 4 x 13 | Trans-Light Blue
| 1 | $0.99 | $0.99 | |
 | Plate Special 1 x 1 with Vertical Tooth | Light Bluish Gray
| 4 | $0.22 | $0.87 | |
 | Creature Body Part, Banshee Head with Dark Purple Markings, Bright Light Orange Eyes print | Medium Azure
| 1 | $0.85 | $0.85 | |
![Image of part Technic Axle Connector with Axle Hole [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6398444.jpg) | Technic Axle Connector with Axle Hole [Reinforced] | Sand Green
| 4 | $0.20 | $0.81 | |
 | Plate 4 x 8 | Light Bluish Gray
| 2 | $0.38 | $0.76 | |
 | Plate 4 x 8 | Black
| 2 | $0.37 | $0.73 | |
![Image of part Plant, Leaves 6 x 5 Swordleaf with Clip [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6253887.jpg) | Plant, Leaves 6 x 5 Swordleaf with Clip [Thick Open O Clip] | Magenta
| 2 | $0.37 | $0.73 | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Reddish Brown
| 6 | $0.12 | $0.73 | |
 | Creature Body Part, Banshee Head with Dark Green Marking, Bright Light Orange Eyes print | Dark Turquoise
| 1 | $0.70 | $0.70 | |
 | Slope 33° 3 x 2 | Dark Bluish Gray
| 4 | $0.18 | $0.70 | |
 | Technic Axle and Pin Connector Angled #1 | White
| 10 | $0.07 | $0.68 | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | White
| 2 | $0.34 | $0.68 | |
 | Bracket 1 x 2 - 2 x 2 | Reddish Brown
| 7 | $0.09 | $0.66 | |
 | Wedge Plate 2 x 2 Cut Corner | Green
| 4 | $0.15 | $0.59 | |
 | Creature Body Part, Banshee Lower Jaw with Red Horn print | Medium Azure
| 1 | $0.58 | $0.58 | |
 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Square Pin Hole | Medium Azure
| 1 | $0.57 | $0.57 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | White
| 3 | $0.19 | $0.57 | |
 | Bracket 1 x 1 - 1 x 1 Inverted | Reddish Brown
| 4 | $0.14 | $0.54 | |
 | Slope Curved 4 x 1 Inverted | Yellow
| 4 | $0.14 | $0.54 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6322828.jpg) | Technic Brick 1 x 2 [1 Pin Hole] | Medium Azure
| 2 | $0.27 | $0.54 | |
 | Brick Special 1 x 4 with 4 Studs on One Side | Black
| 4 | $0.14 | $0.54 | |
 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky | Reddish Brown
| 3 | $0.18 | $0.53 | |
 | Slope 75° 2 x 1 x 3 with Hollow Stud | Dark Bluish Gray
| 2 | $0.26 | $0.51 | |
 | Tile 1 x 3 | Dark Turquoise
| 3 | $0.16 | $0.49 | |
 | Slope Curved 4 x 1 Inverted | White
| 4 | $0.12 | $0.49 | |
 | Creature Body Part, Banshee Lower Jaw with Red Horn print | Dark Turquoise
| 1 | $0.47 | $0.47 | |
 | Tile Special 2 x 3 Pentagonal | Dark Azure
| 1 | $0.45 | $0.45 | |
 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | Medium Azure
| 1 | $0.45 | $0.45 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6137300.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Azure
| 8 | $0.05 | $0.43 | |
 | Technic Axle 2 Notched | Black
| 8 | $0.05 | $0.43 | |
 | Technic Axle 3 | Yellow
| 16 | $0.03 | $0.43 | |
 | Plate 1 x 2 | Tan
| 8 | $0.05 | $0.43 | |
 | Wedge Plate 6 x 2 Left | Black
| 1 | $0.43 | $0.43 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Dark Bluish Gray
| 4 | $0.11 | $0.43 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Light Bluish Gray
| 4 | $0.11 | $0.43 | |
 | Slope Curved 2 x 1 Inverted | White
| 3 | $0.14 | $0.41 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6046943.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Brown
| 6 | $0.07 | $0.41 | |
 | Tile 1 x 1 with Groove | Reddish Brown
| 5 | $0.08 | $0.41 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029948.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Bluish Gray
| 5 | $0.08 | $0.41 | |
 | Slope Curved 3 x 2 No Studs | Yellow
| 1 | $0.38 | $0.38 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Yellow
| 3 | $0.12 | $0.37 | |
 | Weapon Spear Tip with Fins | Dark Bluish Gray
| 3 | $0.12 | $0.37 | |
 | Tile 1 x 3 | Medium Azure
| 3 | $0.12 | $0.37 | |
 | Plate 1 x 2 | Light Bluish Gray
| 5 | $0.07 | $0.34 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Light Bluish Gray
| 6 | $0.05 | $0.32 | |
 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | Lime
| 2 | $0.16 | $0.32 | |
 | Plate 1 x 2 | Trans-Light Blue
| 3 | $0.11 | $0.32 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | White
| 3 | $0.11 | $0.32 | |
![Image of part Technic Axle Connector with Axle Hole [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6331716.jpg) | Technic Axle Connector with Axle Hole [Reinforced] | Black
| 4 | $0.08 | $0.32 | |
 | Wedge Plate 2 x 2 Cut Corner | Light Bluish Gray
| 4 | $0.08 | $0.32 | |
 | Technic Axle 4 | Black
| 8 | $0.04 | $0.32 | |
 | Plant, Plate 1 x 1 Round with 3 Leaves | Bright Green
| 8 | $0.04 | $0.32 | |
 | Slope 33° 3 x 1 | Light Bluish Gray
| 3 | $0.09 | $0.28 | |
 | Plate 1 x 3 | Dark Bluish Gray
| 3 | $0.09 | $0.28 | |
 | Plate 2 x 3 | Green
| 3 | $0.09 | $0.28 | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | Yellow
| 3 | $0.09 | $0.28 | |
 | Tile Round 1 x 1 Quarter | Dark Bluish Gray
| 7 | $0.04 | $0.28 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6302741.jpg) | Technic Pin Connector Round 1L [Beam] | Lime
| 5 | $0.05 | $0.27 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Reddish Brown
| 5 | $0.05 | $0.27 | |
 | Plate Round 1 x 1 with Solid Stud | Trans-Clear
| 5 | $0.05 | $0.27 | |
 | Plate 1 x 1 | White
| 5 | $0.05 | $0.27 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Reddish Brown
| 4 | $0.07 | $0.27 | |
 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Square Pin Hole | Dark Turquoise
| 1 | $0.27 | $0.27 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | White
| 2 | $0.12 | $0.24 | |
 | Bracket 1 x 2 - 1 x 2 | Yellow
| 2 | $0.12 | $0.24 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://cdn.rebrickable.com/media/parts/elements/4654577.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] | Light Bluish Gray
| 3 | $0.08 | $0.24 | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | Black
| 2 | $0.12 | $0.24 | |
 | Weapon Lightsaber Hilt with Bottom Ring | Dark Brown
| 3 | $0.08 | $0.24 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Tan
| 6 | $0.04 | $0.24 | |
 | Plate 2 x 10 | White
| 1 | $0.23 | $0.23 | |
 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | Dark Turquoise
| 1 | $0.23 | $0.23 | |
 | Slope Curved 2 x 2 x 2/3 | Dark Turquoise
| 4 | $0.05 | $0.22 | |
 | Wedge Plate 4 x 4 Cut Corner | Dark Bluish Gray
| 4 | $0.05 | $0.22 | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/4621917.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Dark Bluish Gray
| 4 | $0.05 | $0.22 | |
 | Tile 2 x 2 with Groove | Reddish Brown
| 2 | $0.11 | $0.22 | |
 | Bracket 1 x 2 - 1 x 2 | White
| 2 | $0.11 | $0.22 | |
 | Plate 2 x 3 | White
| 2 | $0.11 | $0.22 | |
 | Technic Axle and Pin Connector Angled #3 - 157.5° | Reddish Brown
| 2 | $0.11 | $0.22 | |
 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | White
| 2 | $0.11 | $0.22 | |
 | Brick Special 1 x 1 with Stud on 1 Side | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Slope Curved 2 x 1 Inverted | Bright Light Orange
| 3 | $0.07 | $0.20 | |
 | Technic Axle and Pin Connector Angled #5 - 112.5° | Reddish Brown
| 1 | $0.20 | $0.20 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | Black
| 5 | $0.04 | $0.20 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6177114.jpg) | Technic Pin Connector Round 1L [Beam] | White
| 5 | $0.04 | $0.20 | |
![Image of part Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots]](https://cdn.rebrickable.com/media/parts/elements/6265699.jpg) | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | Black
| 2 | $0.09 | $0.19 | |
 | Plate 2 x 2 Corner | Light Bluish Gray
| 2 | $0.09 | $0.19 | |
![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6435857.jpg) | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | Light Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | Reddish Brown
| 2 | $0.09 | $0.19 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Yellow
| 2 | $0.09 | $0.19 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet | Black
| 2 | $0.09 | $0.19 | |
 | Wedge Sloped 4 x 2 Triple Right | Light Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Slope Curved 2 x 1 with Stud Notch Right | Blue
| 1 | $0.18 | $0.18 | |
 | Slope Curved 2 x 1 with Stud Notch Left | Blue
| 1 | $0.18 | $0.18 | |
 | Brick 1 x 4 | Light Bluish Gray
| 1 | $0.18 | $0.18 | |
 | Tile Round 1 x 1 with Hollow Bar | Yellowish Green
| 6 | $0.03 | $0.16 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole] | Light Bluish Gray
| 3 | $0.05 | $0.16 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | Yellow
| 3 | $0.05 | $0.16 | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | White
| 3 | $0.05 | $0.16 | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4210762.jpg) | Technic Brick 1 x 2 [2 Pin Holes] | Dark Bluish Gray
| 3 | $0.05 | $0.16 | |
 | Plate 2 x 3 | Yellow
| 3 | $0.05 | $0.16 | |
 | Bracket 1 x 2 - 2 x 2 | Blue
| 3 | $0.05 | $0.16 | |
 | Plate Round 1 x 1 with Open Stud | Dark Red
| 3 | $0.05 | $0.16 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Blue
| 1 | $0.16 | $0.16 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Dark Bluish Gray
| 1 | $0.16 | $0.16 | |
 | Slope Curved 2 x 1 with Stud Notch Right | Dark Red
| 1 | $0.16 | $0.16 | |
 | Technic Axle and Pin Connector Angled #2 - 180° | Dark Brown
| 2 | $0.08 | $0.16 | |
 | Plate 2 x 4 | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Bar 6L with Stop Ring | Reddish Brown
| 2 | $0.08 | $0.16 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6345402.jpg) | Technic Brick 1 x 2 [1 Pin Hole] | Dark Turquoise
| 2 | $0.08 | $0.16 | |
![Image of part Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots]](https://cdn.rebrickable.com/media/parts/elements/6348250.jpg) | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | Sand Green
| 2 | $0.08 | $0.16 | |
 | Slope Curved 2 x 2 x 2/3 | Medium Azure
| 4 | $0.04 | $0.16 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Light Blue
| 4 | $0.04 | $0.16 | |
 | Slope 45° 2 x 2 | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Brick 1 x 2 | Light Bluish Gray
| 1 | $0.15 | $0.15 | |
 | Plate 2 x 6 | Dark Turquoise
| 1 | $0.15 | $0.15 | |
 | Slope Curved 2 x 1 with Stud Notch Left | Dark Red
| 1 | $0.15 | $0.15 | |
 | Slope Curved 3 x 2 No Studs | White
| 1 | $0.15 | $0.15 | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots | Black
| 5 | $0.03 | $0.14 | |
 | Technic Axle 2 Notched | Red
| 5 | $0.03 | $0.14 | |
 | Technic Axle Pin with Friction Ridges Lengthwise | Blue
| 5 | $0.03 | $0.14 | |
 | Plate 1 x 1 | Blue
| 2 | $0.07 | $0.14 | |
 | Plate 2 x 3 | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Technic Pin Connector Hub with 1 Axle | Dark Brown
| 2 | $0.07 | $0.14 | |
 | Slope Inverted 45° 2 x 1 | Light Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Plate 1 x 1 | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Plate 1 x 1 | Green
| 2 | $0.07 | $0.14 | |
 | Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs | Light Bluish Gray
| 1 | $0.14 | $0.14 | |
 | Slope Curved 2 x 2 x 2/3 Inverted | Light Bluish Gray
| 1 | $0.14 | $0.14 | |
 | Wedge Plate 6 x 6 Cut Corner | Light Bluish Gray
| 1 | $0.12 | $0.12 | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/6236582.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends] | Medium Azure
| 1 | $0.12 | $0.12 | |
 | Plate Round 1 x 1 with Open Stud | White
| 3 | $0.04 | $0.12 | |
 | Plate 2 x 10 | Dark Turquoise
| 1 | $0.12 | $0.12 | |
 | Plate 1 x 2 | Green
| 2 | $0.05 | $0.11 | |
 | Plate Round Corner 3 x 3 | Medium Azure
| 2 | $0.05 | $0.11 | |
 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | Black
| 2 | $0.05 | $0.11 | |
 | Plate Round Corner 3 x 3 | Dark Turquoise
| 2 | $0.05 | $0.11 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6249427.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Turquoise
| 2 | $0.05 | $0.11 | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4531751.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation] | Reddish Brown
| 2 | $0.05 | $0.11 | |
 | Wedge Plate 3 x 2 Left | Dark Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Brick Special 1 x 4 with 4 Studs on One Side | Dark Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Tile 1 x 2 with Groove | Dark Azure
| 1 | $0.11 | $0.11 | |
 | Wedge Sloped 45° 2 x 2 Corner | Dark Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Brick Curved 1 x 2 x 1 No Studs | Light Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet | White
| 1 | $0.11 | $0.11 | |
 | Plate 2 x 6 | Dark Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Plate 1 x 4 | Light Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Slope 30° 1 x 2 x 2/3 | Dark Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Bar Holder with Clip | Reddish Brown
| 1 | $0.09 | $0.09 | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/6210775.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends] | Dark Turquoise
| 1 | $0.09 | $0.09 | |
 | Tile Special 2 x 3 Pentagonal | Dark Turquoise
| 1 | $0.09 | $0.09 | |
 | Slope 65° 2 x 1 x 2 | Light Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Tile 1 x 2 with Groove | Black
| 1 | $0.09 | $0.09 | |
 | Plate Special 1 x 1 Rounded with Handle | Green
| 1 | $0.09 | $0.09 | |
 | Plate 1 x 1 | Yellow
| 3 | $0.03 | $0.08 | |
 | Tile Round 1 x 1 Quarter | Dark Turquoise
| 3 | $0.03 | $0.08 | |
 | Tile Round 1 x 1 Quarter | Medium Azure
| 3 | $0.03 | $0.08 | |
 | Wedge Plate 3 x 3 Cut Corner | Black
| 2 | $0.04 | $0.08 | |
 | Plate Special 1 x 2 5.9mm Towball Socket | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Wedge Plate 3 x 2 Right | Black
| 1 | $0.08 | $0.08 | |
 | Plate 2 x 6 | Medium Azure
| 1 | $0.08 | $0.08 | |
 | Tile Round 1 x 1 Quarter | White
| 2 | $0.04 | $0.08 | |
 | Technic Axle 3 with Stop | Reddish Brown
| 2 | $0.04 | $0.08 | |
 | Technic Pin Long without Friction Ridges, with Anti-Roll Notch | Tan
| 2 | $0.04 | $0.08 | |
 | Bracket 1 x 2 - 2 x 4 | Light Bluish Gray
| 1 | $0.08 | $0.08 | |
 | Plate 1 x 4 | White
| 1 | $0.08 | $0.08 | |
 | Technic Axle and Pin Connector Angled #1 | Dark Brown
| 1 | $0.07 | $0.07 | |
 | Tile 1 x 2 with Groove | Dark Turquoise
| 1 | $0.07 | $0.07 | |
 | Technic Brick 1 x 1 with Pin Hole | Light Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Brick Round 1 x 1 Open Stud | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6034044.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | White
| 1 | $0.07 | $0.07 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Dark Red
| 1 | $0.07 | $0.07 | |
 | Plate 2 x 3 | Blue
| 1 | $0.05 | $0.05 | |
 | Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 2 | $0.03 | $0.05 | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114328.jpg) | Brick Special 1 x 2 Palisade [aka Log] | White
| 1 | $0.05 | $0.05 | |
 | Plate 2 x 2 | Light Bluish Gray
| 1 | $0.05 | $0.05 | |
![Image of part Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]](https://cdn.rebrickable.com/media/parts/elements/4210763.jpg) | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4210935.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114053.jpg) | Brick Special 1 x 2 Palisade [aka Log] | Tan
| 1 | $0.04 | $0.04 | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4125562.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | White
| 1 | $0.04 | $0.04 | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4114668.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Yellow
| 1 | $0.04 | $0.04 | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6321350.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | Dark Bluish Gray
| 1 | $0.03 | $0.03 | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611702.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | Light Bluish Gray
| 1 | $0.03 | $0.03 | |
