Death Star (75419-1)
Price Comparison
No retailers currently stock Death Star in Andorra.
Create your personal pricewatch
Create an account to get your personal pricewatch. You will receive an email each time the price of a set in your pricewatch changes.
Go to the login/registration to set up your pricewatch.
Set details
Name: Death StarSet number: 75419-1
Year: 2025
Theme: Star Wars
Number of parts: 9031
Number of part types: 1029
Age rating: 18+
Retirement date: 31-12-2028
Channel the dark side of the Force for a monumental creative challenge with this LEGO® Star Wars™ building kit (75419). This Ultimate Collector Series version of the Death Star from the classic Star Wars saga is the biggest LEGO Star Wars set of all (at launch) and is very displayable on a small surface due to its compact foundation. It is packed with details and Easter eggs to delight every fan. There’s the crushing trash compactor where the Rebel heroes were trapped; Princess Leia’s holding cell; the hangar control room that Luke Skywalker and Han Solo infiltrated disguised as Stormtroopers; the tractor beam control unit that Obi-Wan Kenobi deactivated; Emperor Palpatine’s throne room; the hangar bay with the Imperial Shuttle; the Death Star’s Superlaser; and much more. A spectacular LEGO Star Wars gift for creative adults, this collectible building set includes 38 (yes, 38!) LEGO minifigures/figures with iconic accessories to recreate memorable scenes. Set contains 9,023-pieces.
Browse all 9031 parts in set 75419-1 with individual pricing from BrickLink or Brick Owl.
Pricing information known of 1026/1029 parts.
| Part | Color | Quantity | Average price | Total | Value | |||
|---|---|---|---|---|---|---|---|---|
![]() | Tile 2 x 4 with White Vents print ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Brick Curved 4 x 6 Double, 2 x 4 Cutout ![]() | |||||||
![]() | Slope 55° 1 x 6 x 5 with Bottom Stud Holders ![]() | |||||||
![]() | Tile 6 x 6 with Bottom Tubes ![]() | |||||||
![]() | Hose Rigid 3mm D. 29L / 23.2cm ![]() | |||||||
![]() | Tile 1 x 2 with Tablet, Silver/Tan Death Star Plans print ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Plate 6 x 6 ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Slope 1 x 4 with 1 x 2 Cutout ![]() | |||||||
![]() | Brick 1 x 10 ![]() | |||||||
![]() | Antenna 8H Whip ![]() | |||||||
![]() | Hose Rigid 3mm D. 34L / 27.2cm ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Brick Special 1 x 4 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Cylinder Quarter 2 x 2 x 5 (Wall) ![]() | |||||||
![]() | Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout ![]() | |||||||
![]() | Windscreen 2 x 4 x 2 Vertical ![]() | |||||||
![]() | Plate Special 1 x 3 Rounded with 3 Open Studs ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | |||||||
![]() | Panel 1 x 6 x 5 ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Hose Rigid 3mm D. 10L / 8.0cm ![]() | |||||||
![]() | Brick 1 x 2 x 5 with Hollow Studs ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #7 - 168.75° ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Plate Round Corner 6 x 6 ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Technic Brick 1 x 1 with Axle Hole ![]() | |||||||
![]() | Brick Curved 1 x 2 x 2/3 Double Curved Top, No Studs ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Wedge Plate 6 x 2 Left ![]() | |||||||
![]() | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Plate Special 2 x 8 with Door Rail ![]() | |||||||
![]() | Technic Worm Gear 6M with Axle Hole ![]() | |||||||
![]() | Wedge Plate 6 x 2 Right ![]() | |||||||
![]() | Tile 2 x 6 ![]() | |||||||
![]() | Slope 18° 4 x 1 ![]() | |||||||
![]() | Brick 1 x 16 ![]() | |||||||
![]() | Tile 8 x 16 with 'STAR WARS DEATH STAR', Stats print ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Brick 1 x 12 ![]() | |||||||
![]() | Equipment Wand [Individual] ![]() | |||||||
![]() | Panel 1 x 6 x 5 ![]() | |||||||
![]() | Bar Holder with Hole and Bar Handle ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Brick 1 x 12 ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Slope 75° 2 x 2 x 3 [Solid Studs] ![]() | |||||||
![]() | Brick Curved 2 x 4 x 1 ![]() | |||||||
![]() | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Right ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Arm Mechanical with 2 Clips [Battle Droid] ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Left ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Right ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Tile 4 x 4 Curved, Macaroni ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Right ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Window 1 x 2 x 2 Flat Front ![]() | |||||||
![]() | Bar 2L with Stop in Center ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Plate 4 x 10 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Plate Special 1 x 4 Rounded with 2 Open Studs ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Brick 1 x 1 x 5 with Solid Stud ![]() | |||||||
![]() | Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs ![]() | |||||||
![]() | Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Left ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Brick Special 1 x 1 with Studs on 2 Sides ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate 2 x 14 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Weapon Hilt Symmetric ![]() | |||||||
![]() | Brick 2 x 10 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Brick 1 x 2 x 5 with Hollow Studs ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Left ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Plate Special 1 x 3 Rounded with 3 Open Studs ![]() | |||||||
![]() | Plate Special 4 x 4 with Studs on One Edge [Plain] ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Plate 2 x 16 ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Slope 75° 2 x 1 x 3 with Hollow Stud ![]() | |||||||
![]() | Brick 1 x 12 ![]() | |||||||
![]() | Plate Special 1 x 3 Rounded with 3 Open Studs ![]() | |||||||
![]() | Brick Curved 1 x 4 x 2/3 Double, No Studs ![]() | |||||||
![]() | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Technic Gear Rack 1 x 4 ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #7 - 168.75° ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Bar, Angled with 1 x 1 Round Plate / Stud on End ![]() | |||||||
![]() | Brick 1 x 2 x 3 with Bottom Stud Holder ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Dish 10 x 10 Inverted (Radar) with Solid Studs ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Brick 2 x 8 ![]() | |||||||
![]() | Weapon Gun / Blaster Short (Star Wars) ![]() | |||||||
![]() | Bar 6L with Stop Ring ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Slope Inverted 75° 2 x 1 x 3 ![]() | |||||||
![]() | Tile 2 x 3 ![]() | |||||||
![]() | Equipment Candlestick ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 Inverted ![]() | |||||||
![]() | Plate 3 x 3 ![]() | |||||||
![]() | Brick Curved 1 x 1 ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Tile 2 x 2 Curved, Macaroni ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 ![]() | |||||||
![]() | Plate Special 2 x 2 with Only 2 studs ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Brick 1 x 10 ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | |||||||
![]() | Brick 2 x 8 ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Plate 6 x 8 ![]() | |||||||
![]() | Brick 1 x 2 x 5 with Hollow Studs ![]() | |||||||
![]() | Plate Special 8-Sided Crystal/Gem 1 x 1 x 2/3 ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Plate 1 x 1 x 2/3 Half Round with Side Stud ![]() | |||||||
![]() | Bar 2L with Stop in Center ![]() | |||||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Plate Special 1 x 2 [Open O Top Clip] ![]() | |||||||
![]() | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Slope 33° 3 x 1 ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Plate 1 x 5 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Tile 1 x 2 with Stud Notch Right ![]() | |||||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] ![]() | |||||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | |||||||
![]() | Plate Special 2 x 2 with Horizontal T-Bar Underneath ![]() | |||||||
![]() | Tile 3 x 3 Curved, Macaroni ![]() | |||||||
![]() | Tile 1 x 2 with Stylised Computer Console Print ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate 2 x 14 ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Brick Special 1 x 2 with Studs on 2 Sides ![]() | |||||||
![]() | Plate Special 1 x 1 Rounded with Handle ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular Split ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Brick 1 x 10 ![]() | |||||||
![]() | Panel 4 x 4 x 6 Quarter Cylinder ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 Inverted ![]() | |||||||
![]() | Tile 2 x 6 ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Cutout [New Version] ![]() | |||||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | |||||||
![]() | Bar 1 x 3 [Clip / Anti-Stud] ![]() | |||||||
![]() | Brick 1 x 16 ![]() | |||||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Bracket 2 x 2 with 1 x 2 Vertical Studs ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 Inverted ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | |||||||
![]() | Brick Special 1 x 1 with Studs on 2 Sides ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Brick Special 1 x 2 with Groove ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 Inverted ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Brick Special 1 x 4 with Groove ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Plate 1 x 5 ![]() | |||||||
![]() | Brick Curved 2 x 4 Double, No Studs, with Groove ![]() | |||||||
![]() | Brick 1 x 12 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 Inverted ![]() | |||||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 Inverted ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Slope 65° 2 x 2 x 2 with Bottom Tube ![]() | |||||||
![]() | Plate Special 2 x 2 with Only 2 studs ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Door Frame 1 x 4 x 6 Type 2 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Wedge Plate 2 x 2 Left ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Animal, Bird, Duck / Duckling with Black Eyes, Orange Beak ![]() | |||||||
![]() | Plate Special 1 x 1 Rounded with Handle ![]() | |||||||
![]() | Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder ![]() | |||||||
![]() | Bar, Ring 7L Diameter, with 2 Axle Connectors ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate Round Half 4 x 8 ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Plate 4 x 10 ![]() | |||||||
![]() | Brick Curved 2 x 4 Double, No Studs, with Groove ![]() | |||||||
![]() | Plate 3 x 3 ![]() | |||||||
![]() | Plate Special 2 x 2 with Horizontal T-Bar Underneath ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Slope Curved 2 x 1 Inverted ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Plate Special 2 x 2 with Only 2 studs ![]() | |||||||
![]() | Technic Gear 24 Tooth [New Style with Single Axle Hole] ![]() | |||||||
![]() | Slope Double 45° 1 x 1 ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 Inverted ![]() | |||||||
![]() | Bar 1L with Top Stud and Two Side Studs ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Tile 45° Cut 2 x 2 (Triangle) ![]() | |||||||
![]() | Tile 2 x 3 ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Plate 2 x 16 ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Slope 45° 2 x 4 ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Technic Gear 28 Tooth Double Bevel ![]() | |||||||
![]() | Plate Round 1 x 1 with Hollow Stud and Underside Clip ![]() | |||||||
![]() | Plate Special 2 x 2 with Horizontal T-Bar Underneath ![]() | |||||||
![]() | Weapon Gun / Blaster Small (Star Wars) ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Turntable 2 x 2 Plate, Base ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Hinge Brick 1 x 2 Base ![]() | |||||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | |||||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | |||||||
![]() | Brick 1 x 16 ![]() | |||||||
![]() | Brick 1 x 1 x 5 with Solid Stud ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Plate Round 1 x 2 Half Circle with Stud (Jumper) ![]() | |||||||
![]() | Plate Special 2 x 6 with Gear Catchers on Underside ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Bar 5L with Handle (Friction Ram) ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs ![]() | |||||||
![]() | Plate Special 4 x 6 with Studs on 3 Edges ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Wedge 3 x 3 Facet ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Technic Gear 8 Tooth [Reinforced] ![]() | |||||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Brick 1 x 1 x 3 ![]() | |||||||
![]() | Tile 45° Cut 2 x 2 (Triangle) ![]() | |||||||
![]() | Technic Gear 16 Tooth Reinforced [New Style] ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Panel 1 x 6 x 5 ![]() | |||||||
![]() | Technic Beam 1 x 9 Bent (7 - 3) Thick ![]() | |||||||
![]() | Slope 65° 2 x 1 x 2 ![]() | |||||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | |||||||
![]() | Weapon Gun / Blaster Long (Star Wars) ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Brick Curved 1 x 4 x 2/3 Double, No Studs ![]() | |||||||
![]() | Tile Special 2 x 2 Inverted ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Brick Special 1 x 1 Studs on 4 Sides ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Plate Special 2 x 2 with Only 2 studs ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Slope 10° 6 x 8 ![]() | |||||||
![]() | Slope 75° 2 x 2 x 3 [Solid Studs] ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Technic Engine Crankshaft ![]() | |||||||
![]() | Panel 1 x 4 x 2 with Side Supports - Hollow Studs ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Plate Special 1 x 4 Rounded with 2 Open Studs ![]() | |||||||
![]() | Plate Special 1 x 4 Rounded with 2 Open Studs ![]() | |||||||
![]() | Slope Curved 2 x 1 Inverted ![]() | |||||||
![]() | Brick 1 x 10 ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Wedge Plate 2 x 2 Cut Corner ![]() | |||||||
![]() | Dish 10 x 10 Inverted [Radar] with Black Circles/Cockpit print print ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 Inverted ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Technic Driving Ring Extension, 8 Ridges ![]() | |||||||
![]() | Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Hinge Brick 1 x 2 Top Plate Thin ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Tile Round 1 x 1 with Hollow Bar ![]() | |||||||
![]() | Tile 4 x 4 Curved, Macaroni ![]() | |||||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Edges ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Tile 1 x 2 with Controls print ![]() | |||||||
![]() | Plate Special 3 x 2 with Rounded End, Hole ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Hair, Smooth ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Brick 2 x 10 ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Plate Special 1 x 3 Rounded with 3 Open Studs ![]() | |||||||
![]() | Window 1 x 4 x 3 without Shutter Tabs ![]() | |||||||
![]() | Sports Roller Skate ![]() | |||||||
![]() | Tile 3 x 3 Curved, Macaroni ![]() | |||||||
![]() | Technic Axle 4 ![]() | |||||||
![]() | Sports Roller Skate ![]() | |||||||
![]() | Tile Round 1 x 1 Half Circle ![]() | |||||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | |||||||
![]() | Tile Round 1 x 2 Half Circle ![]() | |||||||
![]() | Technic Driving Ring Extension, 8 Ridges ![]() | |||||||
![]() | Tile 2 x 6 ![]() | |||||||
![]() | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] ![]() | |||||||
![]() | Plate Special 2 x 8 with Door Rail ![]() | |||||||
![]() | Turntable 2 x 2 Plate - Top ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Weapon Gun / Blaster Short (Star Wars) ![]() | |||||||
![]() | Glass for Window 1 x 4 x 6 ![]() | |||||||
![]() | Door Frame 1 x 4 x 4, no Holes ![]() | |||||||
![]() | Plate Round Corner 4 x 4 ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] ![]() | |||||||
![]() | Wedge Plate 2 x 2 Cut Corner ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Plate 1 x 1 x 2/3 Half Round with Side Stud ![]() | |||||||
![]() | Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Brick Special 1 x 1 with Studs on 2 Adjacent Sides ![]() | |||||||
![]() | Door Frame 1 x 4 x 6 Type 2 ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Plate Special 2 x 2 with Only 2 studs ![]() | |||||||
![]() | Wedge Sloped 2 x 5 Right ![]() | |||||||
![]() | Wedge Sloped 2 x 5 Left ![]() | |||||||
![]() | Tile Special 2 x 2 Inverted ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Brick Curved 10 x 1 [Symmetric Inside Ridges] ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] ![]() | |||||||
![]() | Slope Curved 2 x 1 Inverted ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Brick 2 x 2 x 3 ![]() | |||||||
![]() | Plate 6 x 10 ![]() | |||||||
![]() | Box / Crate with Handholds 3 x 4 x 1 2/3 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Plate Round 1 x 2 Half Circle with Stud (Jumper) ![]() | |||||||
![]() | Wedge Plate 2 x 4 27° Right ![]() | |||||||
![]() | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] ![]() | |||||||
![]() | Tile Round 1 x 1 with Black Animal Eye print ![]() | |||||||
![]() | Panel 1 x 6 x 5 ![]() | |||||||
![]() | Plate 4 x 4 Corner ![]() | |||||||
![]() | Plate Round Corner 6 x 6 ![]() | |||||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | |||||||
![]() | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Plate Special 1 x 2 [Open O Top Clip] ![]() | |||||||
![]() | Brick 1 x 2 x 3 with Bottom Stud Holder ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Technic Disc 3 x 3 ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud ![]() | |||||||
![]() | Hinge Brick 1 x 2 Base ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Tile Round 1 x 1 Half Circle ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | |||||||
![]() | Brick Special 1 x 1 with Handle ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 Inverted ![]() | |||||||
![]() | Plate 6 x 6 ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Brick 1 x 10 ![]() | |||||||
![]() | Wedge Plate 2 x 2 Right ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 4 ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 Inverted ![]() | |||||||
![]() | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | |||||||
![]() | Tile Round 2 x 2 with Hole ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Tile Round 1 x 1 Quarter ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Plate 4 x 10 ![]() | |||||||
![]() | Plate Round Corner 2 x 2 with 1 x 1 Cutout ![]() | |||||||
![]() | Wedge Plate 2 x 2 Left ![]() | |||||||
![]() | Glass for Window 1 x 4 x 6 ![]() | |||||||
![]() | Hinge Brick 1 x 2 Base ![]() | |||||||
![]() | Brick Arch 1 x 3 x 2 Inverted [Inside Bow] ![]() | |||||||
![]() | Cone 2 x 2 x 2, Open Stud ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 Inverted ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Tile Round 1 x 1 Quarter ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Edges ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Bracket 2 x 2 with 1 x 2 Vertical Studs ![]() | |||||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Cutout [New Version] ![]() | |||||||
![]() | Plate Round Corner 4 x 4 ![]() | |||||||
![]() | Slope 75° 2 x 1 x 3 with Hollow Stud ![]() | |||||||
![]() | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs ![]() | |||||||
![]() | Door 1 x 4 x 4 Lift ![]() | |||||||
![]() | Brick 1 x 1 x 3 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 2 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Brick Curved 1 x 2 x 1 No Studs ![]() | |||||||
![]() | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) ![]() | |||||||
![]() | Brick Round 4 x 4 with Recessed Center ![]() | |||||||
![]() | Launcher, Weapon Crossbow Shooter ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise with No Center Slots ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Technic Pin Connector Round [Slotted] ![]() | |||||||
![]() | Wedge Plate 2 x 2 Right ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Slope 45° 2 x 4 ![]() | |||||||
![]() | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) ![]() | |||||||
![]() | Plate Special 1 x 2 with 2 End Towballs ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Hinge Brick 1 x 2 Top Plate Thin ![]() | |||||||
![]() | Tile 1 x 1 with Black Cross, Dark Bluish Grey/Dark Red Button print ![]() | |||||||
![]() | Plate Round Half 4 x 8 ![]() | |||||||
![]() | Brick Special 1 x 2 with Studs on 2 Sides ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Technic Bush ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | |||||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Plate Special 1 x 2 with Pin Hole Underneath ![]() | |||||||
![]() | Bar 1 x 12 with 1 x 2 Plate End with Solid Studs and 1 x 1 Round Plate End ![]() | |||||||
![]() | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Pin 1/2 with Friction ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on Side ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Dish 3 x 3 Inverted [Radar] ![]() | |||||||
![]() | Tile 2 x 2 Curved, Macaroni ![]() | |||||||
![]() | Slope 45° 2 x 4 ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Plate Special 1 x 2 with 5.9mm Centre Side Towball ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Slope 18° 4 x 2 ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #6 - 90° ![]() | |||||||
![]() | Tile 2 x 3 ![]() | |||||||
![]() | Brick 1 x 2 x 5 with Hollow Studs ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Door Frame 1 x 4 x 6 Type 2 ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Plate Special 2 x 2 with Pin on Bottom ![]() | |||||||
![]() | Slope 25° 1 x 8 x 3 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] ![]() | |||||||
![]() | Wedge 2 x 2 Facet ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Plate 1 x 5 ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Brick Curved 1 x 4 x 2/3 Double, No Studs ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Brick 1 x 1 x 5 with Solid Stud ![]() | |||||||
![]() | Technic Pin 1/2 with 2L Bar Extension ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Slope Curved 2 x 1 with Stud Notch Left ![]() | |||||||
![]() | Plate Round 4 x 4 with 2 x 2 Round Opening ![]() | |||||||
![]() | Bracket 2 x 2 with 1 x 2 Vertical Studs ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] ![]() | |||||||
![]() | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Bar, Angled with 1 x 1 Round Plate / Stud on End ![]() | |||||||
![]() | Tile Special 2 x 2 Corner with Cut Corner - Facet ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Slope Inverted 33° 3 x 2, Connections between Studs, Round Bottom Pin ![]() | |||||||
![]() | Plate Round Corners 2 x 6 Double ![]() | |||||||
![]() | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | |||||||
![]() | Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection ![]() | |||||||
![]() | Brick Special 1 x 4 with Groove ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Technic Gear 12 Tooth Double Bevel ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Plate Round Corner 4 x 4 ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Brick 1 x 1 x 5 with Solid Stud ![]() | |||||||
![]() | Bar Holder with Clip ![]() | |||||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | |||||||
![]() | Slope Curved 2 x 1 with Stud Notch Right ![]() | |||||||
![]() | Wedge Curved 10 x 3 Left ![]() | |||||||
![]() | Bar 1 x 3 (Radio Handle, Phone Handset) ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Plate 4 x 10 ![]() | |||||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] ![]() | |||||||
![]() | Technic Gear 20 Tooth Bevel with Pin Hole ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | |||||||
![]() | Equipment Wand [Individual] ![]() | |||||||
![]() | Bar 3L ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Plate Round 6 x 6 with Hole ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Axle Pin 3L without Friction Ridges and 2L Axle ![]() | |||||||
![]() | Wedge Curved 10 x 3 Right ![]() | |||||||
![]() | Slope 18° 4 x 2 ![]() | |||||||
![]() | Wedge Plate 2 x 4 27° Left ![]() | |||||||
![]() | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Plate Special 1 x 4 with Bar Down ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Tile Round 1 x 1 with Hollow Bar ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Cutout [New Version] ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Plate Round Half 3 x 6 with 1 x 2 Cutout ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 Inverted ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 4 x 4 Corner ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | |||||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle ![]() | |||||||
![]() | Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder ![]() | |||||||
![]() | Brick Arch 1 x 3 x 2 Inverted [Inside Bow] ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Tile Round 1 x 1 with Hollow Bar ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #3 - 157.5° ![]() | |||||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Panel 1 x 4 x 2 with Side Supports - Hollow Studs ![]() | |||||||
![]() | Exhaust Pipe with Technic Pin - Flat End, Squared Hole ![]() | |||||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Slope 18° 4 x 1 ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Technic Axle 3 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Panel 1 x 4 x 2 with Side Supports - Hollow Studs ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Plate Round Half 4 x 8 ![]() | |||||||
![]() | Wedge Plate 6 x 6 Cut Corner ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Tile 45° Cut 2 x 2 (Triangle) ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Wedge Plate 2 x 2 Cut Corner ![]() | |||||||
![]() | Tile 4 x 4 Curved, Macaroni ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | |||||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Slope 18° 4 x 1 ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | |||||||
![]() | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Slope 33° 3 x 1 ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Brick 1 x 2 x 3 with Bottom Stud Holder ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Brick Curved 2 x 1 with Inverted Cutout ![]() | |||||||
![]() | Tile Round 2 x 2 with Hole ![]() | |||||||
![]() | Tile Special 2 x 2 Corner with Cut Corner - Facet ![]() | |||||||
![]() | Panel 1 x 1 x 1 Corner ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Long Tip) ![]() | |||||||
![]() | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides ![]() | |||||||
![]() | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Plate 1 x 1 x 2/3 Half Round with Side Stud ![]() | |||||||
![]() | Brick Round 2 x 2 [Grill] ![]() | |||||||
![]() | Equipment Cutlery - Spoon, Flat Bottom ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Panel 1 x 1 x 1 Corner ![]() | |||||||
![]() | Slope Curved 4 x 1 Inverted ![]() | |||||||
![]() | Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Plate Special / Shield Rectangular with 4 Studs, Handle ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection ![]() | |||||||
![]() | Wedge 4 x 4 Facet ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 with Buttons And Red Screens Print ![]() | |||||||
![]() | Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] ![]() | |||||||
![]() | Tile 2 x 3 ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Wedge 3 x 2 Right ![]() | |||||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | |||||||
![]() | Plate Round Corner 3 x 3 ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Wave / Lightning Angular, Single ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 ![]() | |||||||
![]() | Plate Round Corner 3 x 3 ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 ![]() | |||||||
![]() | Wheel 11 x 8 with Center Groove ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #4 - 135° ![]() | |||||||
![]() | Slope Double 45° 1 x 1 ![]() | |||||||
![]() | Equipment Cutlery - Fork ![]() | |||||||
![]() | Wedge 3 x 2 Left ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Edges ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Technic Brick 1 x 1 with Axle Hole ![]() | |||||||
![]() | Technic Axle 8 ![]() | |||||||
![]() | Window 1 x 4 x 3 without Shutter Tabs ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Equipment Medical Syringe with 2 Holes ![]() | |||||||
![]() | Technic Axle 9 ![]() | |||||||
![]() | Plate 2 x 3 with 1 x 1 Cutout ![]() | |||||||
![]() | Plate 3 x 3 Corner ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Tile 2 x 3 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Tile Round 1 x 1 Quarter ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | |||||||
![]() | Plate Special 1 x 2 with Pin Hole on Top ![]() | |||||||
![]() | Plate Special 1 x 2 [Open O Top Clip] ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Slope Curved 2 x 1 with Stud Notch Left ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Wedge Curved 4 x 4 No Top Studs ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | |||||||
![]() | Slope Curved 2 x 1 with Stud Notch Right ![]() | |||||||
![]() | Tile Special 2 x 2 Inverted ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Wedge Plate 2 x 4 ![]() | |||||||
![]() | Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Plate Special 1 x 2 5.9mm Towball Socket ![]() | |||||||
![]() | Technic Axle 6 ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Brick Round 2 x 2 [Grill] ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Plate Special 1 x 2 5.9mm Centre Side Towball Socket ![]() | |||||||
![]() | Slope Curved 2 x 1 No Studs [1/2 Bow] ![]() | |||||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] ![]() | |||||||
![]() | Wedge Plate 2 x 4 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Equipment Cup / Mug [Plain] ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Brick Special 2 x 2 with Grooves and Axle Hole ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Bar 3L ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Wedge Plate 2 x 2 Left ![]() | |||||||
![]() | Plate Round 4 x 4 with 2 x 2 Round Opening ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] ![]() | |||||||
![]() | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Pin 1/2 with 2L Bar Extension ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Technic Ball Joint ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Plate Special 1 x 2 [Open O Top Clip] ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Wedge Plate 8 x 8 Cut Corner ![]() | |||||||
![]() | Wedge Plate 6 x 6 Cut Corner ![]() | |||||||
![]() | Wedge Plate 2 x 2 Right ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Technic Beam 1 x 3 Thin ![]() | |||||||
![]() | Brick Round 2 x 2 Truncated Cone ![]() | |||||||
![]() | Plate 3 x 3 ![]() | |||||||
![]() | Slope Inverted 33° 3 x 2, Connections between Studs, Round Bottom Pin ![]() | |||||||
![]() | Brick and Axle Separator v2.0 ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end ![]() | |||||||
![]() | Musical Instrument Microphone [Plain] ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Tile Round 2 x 2 with Hole ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Tile Special 2 x 3 Pentagonal ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Minifig Neckwear Collar SW Darth Vader Helmet Bottom ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Equipment Cup / Mug [Plain] ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge] ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Slope Curved 4 x 1 Inverted ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Axle 3 ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | |||||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Technic Disc 3 x 3 ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | |||||||
![]() | Wedge Plate 8 x 8 Cut Corner ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Vertical on End ![]() | |||||||
![]() | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side ![]() | |||||||
![]() | Brick Special 2 x 4 x 1 1/3 with Axle Holes and 2 x 2 Recessed and Hole ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Tile Special 2 x 2 Inverted ![]() | |||||||
![]() | Slope 33° 3 x 1 ![]() | |||||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | |||||||
![]() | Technic Beam 1 x 7 Thick ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On Top ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Tile 1 x 2 with Video Tape and Reels Print ![]() | |||||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | |||||||
![]() | Slope 65° 2 x 1 x 2 ![]() | |||||||
![]() | Slope 33° 3 x 1 ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Plate Special 4 x 4 with 2 x 2 Opening ![]() | |||||||
![]() | Panel 1 x 2 x 1 with Rounded Corners and Central Divider ![]() | |||||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | |||||||
![]() | Tile Special 2 x 2 Corner with Cut Corner - Facet ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Tile Special 2 x 2 with Top Pin [Squared Holes] ![]() | |||||||
![]() | Lever Small Base with Black Lever ![]() | |||||||
![]() | Panel 1 x 1 x 1 Corner ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on Side ![]() | |||||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | |||||||
![]() | Technic Axle 5 ![]() | |||||||
![]() | Plate Special 3 x 2 with Rounded End, Hole ![]() | |||||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Plate Special 1 x 2 with End Towball ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Brick Special 1 x 2 with Handle ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Tile Round 1 x 1 with Hollow Bar ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Brick Round 2 x 2 Dome Bottom [Open Stud] ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Technic Axle Connector with Axle Hole [Reinforced] ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On Top ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Brick 1 x 1 x 3 ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | |||||||
![]() | Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | |||||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | |||||||
![]() | Technic Axle 7 ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | |||||||
![]() | Slope Curved 2 x 1 No Studs [1/2 Bow] ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate ![]() | |||||||
![]() | Technic Bush ![]() | |||||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | |||||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on Side ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Equipment Hairbrush Short Handle [10mm] ![]() | |||||||
![]() | Turntable 2 x 2 Plate, Base ![]() | |||||||
![]() | Hinge Plate 2 x 2 Locking with 1 Finger on Top ![]() | |||||||
![]() | Plate Special 1 x 2 with Pin Hole on Top ![]() | |||||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | |||||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | |||||||
![]() | Technic Axle Pin without Friction Ridges Lengthwise ![]() | |||||||
![]() | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed ![]() | |||||||
![]() | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | |||||||
![]() | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center ![]() | |||||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | |||||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | |||||||
![]() | Technic Axle 3 with Stop ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Brick Special 1 x 2 with Vertical Closed Handle on Edge ![]() | |||||||
![]() | Plate Special 2 x 2 with Towball and Hole ![]() | |||||||
![]() | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] ![]() | |||||||
![]() | Technic Axle 5.5 with Stop [Rounded Short End] ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Launcher Trigger, Weapon Gun Trigger ![]() | |||||||
Missing pricing information on the following items.
| Part | Color | Quantity | |
|---|---|---|---|
![]() | Seat / Chair 2 x 2 with Center Sprue Mark ![]() | ||
![]() | Equipment Hose Nozzle / Gun with Side String Hole Simplified ![]() | ||
![]() | Sticker Sheet for Set 75419-1 ![]() | ||
Minifigures included in set 75419-1.
| Minifigure | Quantity | Value | |
|---|---|---|---|
![]() | Royal Guard, Dark Red Hands, 19888 Cape, 28621 Head fig-016918, sw1478, BOID 112191 | 2 | $9.05 |
![]() | 5D6-RA-7 fig-016911, sw1473, BOID 214904 | 1 | $35.27 |
![]() | Admiral Motti fig-016906, sw1468, BOID 537376 | 1 | $41.35 |
![]() | Astromech Droid, R2-D2, Dual Sided Printed Body fig-012571, sw1202, BOID 306193 | 1 | $5.35 |
![]() | Astromech Droid, R3-T6 fig-016901, sw1466, BOID 1056596 | 1 | $30.49 |
![]() | C-3PO - Arm Print fig-012570, sw1201, BOID 478904 | 1 | $6.60 |
![]() | Chewbacca, Dark Brown - Long Lines on Legs on Inside fig-001714, sw0532, BOID 725457 | 1 | $4.69 |
![]() | Colonel Yularen, White Hair fig-016908, sw1470, BOID 1542025 | 1 | $53.62 |
![]() | Darth Vader, White Skin, 19888 Cape fig-013445, sw1249, BOID 1299455 | 1 | $7.57 |
![]() | Director Krennic fig-016922, sw1482, BOID 642375 | 1 | $53.07 |
![]() | Emperor Palpatine - Tan Head, Cape fig-013742, sw1263, BOID 226709 | 1 | $10.87 |
![]() | Galen Erso fig-016924, sw1481, BOID 949826 | 1 | $97.87 |
![]() | General Tagge fig-016907, sw1469, BOID 639661 | 1 | $39.33 |
![]() | Grand Moff Tarkin, Plain Legs fig-016909, sw1471, BOID 985701 | 1 | $44.45 |
![]() | Han Solo, Smuggler Outfit fig-016892, sw1457, BOID 1049467 | 1 | $15.47 |
![]() | Han Solo, Stormtrooper Outfit fig-016893, sw1458, BOID 1380729 | 1 | $9.05 |
![]() | Hot Tub Stormtrooper fig-016920, sw1479, BOID 1217740 | 1 | $93.41 |
![]() | Imperial Crew Member, Tan Hair fig-016897, sw1462, BOID 836152 | 1 | $13.94 |
![]() | Imperial Crew, Light Bluish Gray Uniform, Black Cap, Open Mouth fig-015311, sw1373, BOID 1343689 | 1 | $10.29 |
![]() | Imperial Dignitary Sim Aloo fig-016916, sw1477, BOID 929684 | 1 | $65.29 |
![]() | Imperial Gunner, Reddish Brown Head fig-016912, sw1474, BOID 601765 | 1 | $7.99 |
![]() | Imperial Gunner, Sienna Brown Head fig-016910, sw1472, BOID 472199 | 1 | $6.84 |
![]() | Imperial Navy Officer, Lieutenant fig-016900, sw1465, BOID 1143717 | 1 | $22.81 |
![]() | Imperial Navy Trooper, Reddish Brown Head fig-016913, sw1475, BOID 878150 | 1 | $10.17 |
![]() | Imperial Navy Trooper, Warm Tan Head fig-015313, sw1375, BOID 1097216 | 1 | $7.22 |
![]() | Imperial Shuttle Pilot, Medium Nougat Head fig-016921, sw1480, BOID 336455 | 1 | $14.94 |
![]() | Interrogation Droid fig-016931, sw1461, BOID 303687 | 1 | $4.02 |
![]() | Luke Skywalker, Black Outfit fig-016915, sw1476, BOID 983987 | 1 | $10.60 |
![]() | Luke Skywalker, Stormtrooper Outfit fig-016896, sw1460, BOID 1417761 | 1 | $9.03 |
![]() | Luke Skywalker, White Robe fig-016923, sw1453, BOID 1358461 | 1 | $15.10 |
![]() | Mouse Droid (MSE-6-series Repair Droid) - Dark Bluish Gray, Solid Stud fig-010442, sw0156, BOID 674677 | 1 | $2.92 |
![]() | Obi-Wan Kenobi, Dark Brown Hood, Cloak fig-016903, sw1467, BOID 824234 | 1 | $21.27 |
![]() | Princess Leia Organa, Ambassador Outfit fig-016894, sw1459, BOID 773805 | 1 | $11.92 |
![]() | Stormtrooper - Medium Brown Head fig-014802, sw1326, BOID 1227247 | 1 | $4.54 |
![]() | Stormtrooper, Light Nougat Head, Female fig-016926, sw1456, BOID 1310124 | 1 | $9.73 |
![]() | Stormtrooper, Medium Nougat Head fig-016925, sw1455, BOID 645427 | 1 | $10.23 |
![]() | Stormtrooper, Sienna Brown Head, Female fig-016899, sw1464, BOID 432981 | 1 | $9.00 |
![]() | Stormtrooper, Umber Brown Head fig-016889, sw1454, BOID 1061413 | 1 | $8.76 |
![]() | Stormtrooper, Warm Tan Head, Female fig-016890, sw1463, BOID 581633 | 1 | $8.36 |
| Total minifigure value: | $851.54 | ||
Compare the value of buying Death Star as a complete set versus the total value of all parts individually.
| Value Breakdown | |
| Parts value | $1531.73 |
| Minifigure value | $851.54 |
| Total inventory value | $NaN |
BrickLink ![]() | |||||
| Condition | Timespan | Avg price | Items sold | Inventory value | Ratio |
| New | 6 months | ? | ? | $1929.34 | ? |
| Used | 6 months | ? | ? | $0.00 | ? |
Brick Owl ![]() | ||||
| Condition | Timespan | Avg price | Inventory value | Ratio |
| New | Current | $1304.71 | $2889.83 | 2.21 |
| 6 months | ? | $1887.57 | ? | |
| 1 year | ? | $1991.29 | ? | |
| Used | Current | ? | $2029.06 | ? |
| Combined 6 Month Sales Volume (New) | |
| Total items sold | ? |
Channel the dark side of the Force for a monumental creative challenge with this LEGO® Star Wars™ building kit (75419). This Ultimate Collector Series version of the Death Star from the classic Star Wars saga is the biggest LEGO Star Wars set of all (at launch) and is very displayable on a small surface due to its compact foundation.
It is packed with details and Easter eggs to delight every fan. There’s the crushing trash compactor where the Rebel heroes were trapped; Princess Leia’s holding cell; the hangar control room that Luke Skywalker and Han Solo infiltrated disguised as Stormtroopers; the tractor beam control unit that Obi-Wan Kenobi deactivated; Emperor Palpatine’s throne room; the hangar bay with the Imperial Shuttle; the Death Star’s Superlaser; and much more.
A spectacular LEGO Star Wars gift for creative adults, this collectible building set includes 38 (yes, 38!) LEGO minifigures/figures with iconic accessories to recreate memorable scenes. Set contains 9,023-pieces.
- LEGO® Star Wars™ diorama building kit – Build the biggest (at launch) LEGO Star Wars set: the Ultimate Collector Series version of the Death Star, as seen in Star Wars: A New Hope™
- 38 characters – 36 LEGO® Star Wars™ minifigures, including LukeSkywalker (Jedi and Stormtrooper versions), Han Solo (2 versions), Princess Leia, Chewbacca and Darth Vader, plus 2 LEGO droid figures
- Authentic details – The trash chute and crushing trash compactor, functional elevator, Emperor Palpatine’s throne room and Imperial Shuttle, tractor beam control unit, Superlaser and much more
- Recreate classic scenes – From Luke and Leia swinging to safety from the retractable bridge to the Darth Vader vs. Obi-Wan Kenobi Lightsaber™ duel, relive every iconic moment inside the Death Star
- LEGO® Star Wars™ gift for creative adults – Treat yourself or gift this spectacular buildable model to another adult Star Wars fan, advanced LEGO builder or collector of LEGO Star Wars UCS sets
- Immerse yourself – Enjoy every step of this complex build with the LEGO® Builder app; you can view a 3D digital version of the construction model as you build, track your progress and save sets
- LEGO® Star Wars™ collectible sets for adults – From a galaxy far, far away to your living room, LEGO Star Wars sets for adults are designed for people who enjoy mindful, creative activities to relax
- Dimensions – The LEGO® Star Wars™ Death Star buildable model in this 9,023-piece set measures over 27.5 in. (70 cm) high, 31 in. (79 cm) wide and 10.5 in. (27 cm) deep
Find the cheapest offers for set 75419-1 from sellers on secondary marketplaces like Brick Owl and eBay. As an eBay Partner Network Affiliate and Brick Owl Affiliate, I earn from qualifying purchases.
| Item | Price | |
|---|---|---|
BrickLink history of 0 sales with 0 total item quantity. Item condition: New.
No sale history available.


























![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4583898.jpg)






















![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6134378.jpg)









![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6425507.jpg)

![Image of part Equipment Wand [Individual]](https://cdn.rebrickable.com/media/parts/ldraw/15/36752a.png)





![Image of part Slope 75° 2 x 2 x 3 [Solid Studs]](https://cdn.rebrickable.com/media/parts/elements/6007894.jpg)

![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4558209.jpg)


![Image of part Arm Mechanical with 2 Clips [Battle Droid]](https://cdn.rebrickable.com/media/parts/elements/4211658.jpg)

























![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146223.jpg)























![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/4211837.jpg)














































![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4567448.jpg)













![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6326078.jpg)
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439041.jpg)




![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6059033.jpg)

![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6254045.jpg)




![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6416524.jpg)

![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6308000.jpg)
![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4107558.jpg)
















![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6093859.jpg)

![Image of part Bar 1 x 3 [Clip / Anti-Stud]](https://cdn.rebrickable.com/media/parts/elements/4211644.jpg)









![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4164471.jpg)















![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211705.jpg)


























![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg)










![Image of part Technic Gear 24 Tooth [New Style with Single Axle Hole]](https://cdn.rebrickable.com/media/parts/elements/4514558.jpg)









![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6366391.jpg)


![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg)










![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6271127.jpg)






![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114328.jpg)















![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469440.jpg)
![Image of part Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)





![Image of part Technic Gear 16 Tooth Reinforced [New Style]](https://cdn.rebrickable.com/media/parts/elements/4640536.jpg)























![Image of part Slope 75° 2 x 2 x 3 [Solid Studs]](https://cdn.rebrickable.com/media/parts/elements/6007896.jpg)












![Image of part Dish 10 x 10 Inverted [Radar] with Black Circles/Cockpit print print](https://cdn.rebrickable.com/media/parts/elements/6457969.jpg)



![Image of part Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]](https://cdn.rebrickable.com/media/parts/elements/6286381.jpg)


![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211000.jpg)






























![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6156991.jpg)







![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6331866.jpg)



![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6210076.jpg)





![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6183784.jpg)






![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146220.jpg)





![Image of part Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037664.jpg)

![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6071299.jpg)









![Image of part Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]](https://cdn.rebrickable.com/media/parts/elements/6075066.jpg)







![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469445.jpg)
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515368.jpg)





![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6360077.jpg)























![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370101.jpg)




![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092649.jpg)



















![Image of part Brick Arch 1 x 3 x 2 Inverted [Inside Bow]](https://cdn.rebrickable.com/media/parts/elements/6154860.jpg)








![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6350292.jpg)
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6188112.jpg)



















![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526985.jpg)





![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469441.jpg)




![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469463.jpg)


![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4211743.jpg)

![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg)



![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4593678.jpg)




![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg)



![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211787.jpg)


















![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6257593.jpg)


















![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6325717.jpg)
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4594686.jpg)





![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585429.jpg)




![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg)
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4163711.jpg)














![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6416444.jpg)



![Image of part Equipment Wand [Individual]](https://cdn.rebrickable.com/media/parts/ldraw/0/36752a.png)
















![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/4621917.jpg)



![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/6146321.jpg)









![Image of part Brick Arch 1 x 3 x 2 Inverted [Inside Bow]](https://cdn.rebrickable.com/media/parts/elements/6172811.jpg)



![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4567449.jpg)














![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439040.jpg)








![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146225.jpg)
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278273.jpg)











![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211541.jpg)
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6237716.jpg)



![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg)
















![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4593679.jpg)

![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/4650645.jpg)




![Image of part Plate Special 3 x 4 with 1 x 4 Center Studs [Plain]](https://cdn.rebrickable.com/media/parts/elements/6079461.jpg)
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469455.jpg)

![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4214760.jpg)




![Image of part Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version]](https://cdn.rebrickable.com/media/parts/elements/6052786.jpg)





































![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg)
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6121485.jpg)

![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg)



![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6100030.jpg)





![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6008715.jpg)



![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370126.jpg)










![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/6024730.jpg)




![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515369.jpg)


![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092570.jpg)
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6168618.jpg)


![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/6238856.jpg)







![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6321747.jpg)
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6345426.jpg)







![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6344754.jpg)




![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469446.jpg)








![Image of part Musical Instrument Microphone [Plain]](https://cdn.rebrickable.com/media/parts/elements/6088550.jpg)









![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370021.jpg)

![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278274.jpg)
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg)
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469450.jpg)






![Image of part Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge]](https://cdn.rebrickable.com/media/parts/elements/6282144.jpg)


![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4587212.jpg)







![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg)


![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6310268.jpg)



![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408126.jpg)














![Image of part Technic Plate 2 x 4 [3 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211444.jpg)







![Image of part Technic Plate 2 x 6 [5 Holes]](https://cdn.rebrickable.com/media/parts/elements/3200126.jpg)

![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6435857.jpg)


![Image of part Tile Special 2 x 2 with Top Pin [Squared Holes]](https://cdn.rebrickable.com/media/parts/elements/6313138.jpg)




![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114053.jpg)





![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4594238.jpg)










![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg)
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146215.jpg)





![Image of part Brick Round 2 x 2 Dome Bottom [Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6102756.jpg)

![Image of part Technic Axle Connector with Axle Hole [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6331716.jpg)




![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529241.jpg)




![Image of part Technic Plate 2 x 6 [5 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211542.jpg)


![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg)

![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6028813.jpg)









![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512363.jpg)


![Image of part Equipment Hairbrush Short Handle [10mm]](https://cdn.rebrickable.com/media/parts/elements/4243668.jpg)


![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512360.jpg)


![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4666352.jpg)



![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265401.jpg)

![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4211599.jpg)

![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg)








![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611702.jpg)
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg)











































