| Wedge Plate 4 x 6 | Light Bluish Gray
| 8 | | | |
| Dish 8 x 8 Inverted [Radar], Solid Studs, Rounded Anti-stud Underside, TIE Interceptor Hatch print | Light Bluish Gray
| 1 | | | |
| Train Wheel Spoked with Technic Axle Hole and Rubber Friction Band | Light Bluish Gray
| 2 | | | |
| Plate 1 x 6 | Reddish Orange
| 12 | | | |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Stud | Light Bluish Gray
| 32 | | | |
| Brick Sloped 1 x 6 x 1 with 1 x 2 x 1 / 3 Cutout | Light Bluish Gray
| 4 | | | |
| Tile 8 x 16 with Smooth Surface with 'STAR WARS TIE Interceptor', Stats print | Black
| 1 | | | |
| Wedge Plate 2 x 2 Cut Corner | Dark Azure
| 24 | | | |
| Dish 8 x 8 Inverted (Radar) with TIE Interceptor Cockpit print | Trans-Clear
| 1 | | | |
| Road Sign Clip-on 2.2 x 2.667 Triangular with Open O Clip | Black
| 8 | | | |
| Plate 4 x 6 | Black
| 24 | | | |
| Plate 1 x 12 | Light Bluish Gray
| 24 | | | |
| Slope Curved 2 x 2 x 2/3 | Light Bluish Gray
| 27 | | | |
| Tile 1 x 8 with Groove | Light Bluish Gray
| 28 | | | |
| Plate 6 x 10 | Black
| 8 | | | |
| Tile Special 1 x 3 Inverted with Center Hole | Light Bluish Gray
| 16 | | | |
| Game Controller [Plain] | Dark Bluish Gray
| 4 | | | |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | Light Bluish Gray
| 8 | | | |
| Plate 1 x 3 | Light Bluish Gray
| 46 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Light Bluish Gray
| 13 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Light Bluish Gray
| 13 | | | |
| Hinge Plate 3 x 4 Locking Dual 2 Finger, 7 teeth | Light Bluish Gray
| 12 | | | |
| Plate 1 x 8 | Light Bluish Gray
| 20 | | | |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | Red
| 4 | | | |
| Plate 4 x 4 | Black
| 24 | | | |
| Plate 1 x 5 | Light Bluish Gray
| 16 | | | |
| Tile 1 x 2 with Groove | Light Bluish Gray
| 23 | | | |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | Light Bluish Gray
| 32 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 45 | | | |
| Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout | Light Bluish Gray
| 4 | | | |
| Tile 1 x 6 with Groove | Light Bluish Gray
| 16 | | | |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | Light Bluish Gray
| 16 | | | |
| Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | Light Bluish Gray
| 4 | | | |
| Tile Round 1 x 2 Half Circle | Orange
| 5 | | | |
| Bar 1 x 12 with 1 x 2 Plate End with Solid Studs and 1 x 1 Round Plate End | Light Bluish Gray
| 8 | | | |
| Helmet AT-AT / Tie Pilot | Black
| 1 | | | |
| Tile 1 x 3 | Light Bluish Gray
| 20 | | | |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | Blue
| 2 | | | |
| Hips and Black Legs with Light Bluish grey Pants Lines print | Black
| 1 | | | |
| Brick 1 x 4 x 3 with R2-D2, Hologram Brick, '25 YEARS OF LEGO STAR WARS' print | Black
| 1 | | | |
| Wedge Plate 3 x 2 Left | Light Bluish Gray
| 14 | | | |
| Wedge Plate 6 x 4 Left | Sand Green
| 2 | | | |
| Wedge Plate 6 x 4 Right | Sand Green
| 2 | | | |
| Hinge Brick 1 x 2 Top Plate Thin | Light Bluish Gray
| 12 | | | |
| Wedge Plate 3 x 2 Right | Light Bluish Gray
| 14 | | | |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Dark Bluish Gray
| 12 | | | |
| Plate 2 x 3 | Light Bluish Gray
| 30 | | | |
| Technic Brick 1 x 16 [15 Pin Holes] | Black
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 | Lime
| 8 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Light Bluish Gray
| 15 | | | |
| Plate 4 x 10 | Black
| 4 | | | |
| Plate 2 x 16 | Dark Bluish Gray
| 5 | | | |
| Technic Brick 1 x 14 [13 Pin Holes] | Dark Bluish Gray
| 4 | | | |
| Wedge Plate 2 x 2 Cut Corner | Red
| 12 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Light Bluish Gray
| 31 | | | |
| Plate 1 x 10 | Light Bluish Gray
| 10 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 26 | | | |
| Slope 18° 2 x 1 x 2/3 with 4 Slots | Light Bluish Gray
| 16 | | | |
| Slope 30° 1 x 2 x 2/3 | Light Bluish Gray
| 16 | | | |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | Dark Bluish Gray
| 4 | | | |
| Wedge Plate 4 x 9 with Stud Notches | Light Bluish Gray
| 8 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Black
| 15 | | | |
| Plate 1 x 4 | Light Bluish Gray
| 18 | | | |
| Sports Roller Skate | Light Bluish Gray
| 7 | | | |
| Plate 1 x 1 | Light Bluish Gray
| 27 | | | |
| Hinge Brick 1 x 2 Base | Dark Bluish Gray
| 11 | | | |
| Plate 4 x 6 | Medium Azure
| 12 | | | |
| Brick Round 1 x 1 x 1 1/3 Quarter Dome | Black
| 2 | | | |
| Slope 18° 4 x 1 | Light Bluish Gray
| 6 | | | |
| Plate 1 x 1 | Dark Bluish Gray
| 23 | | | |
| Bar 1L with Top Stud and Two Side Studs | Light Bluish Gray
| 10 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Dark Bluish Gray
| 12 | | | |
| Slope Curved 3 x 2 No Studs | Light Bluish Gray
| 3 | | | |
| Wedge Plate 2 x 2 Cut Corner | Dark Bluish Gray
| 14 | | | |
| Bar, Angled with Stud on End | Light Bluish Gray
| 7 | | | |
| Plate 2 x 3 | Black
| 16 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Dark Bluish Gray
| 16 | | | |
| Tile 1 x 3 | Dark Bluish Gray
| 8 | | | |
| Tile Round 1 x 1 Quarter | Light Bluish Gray
| 18 | | | |
| Slope Curved 2 x 1 Inverted | Dark Bluish Gray
| 8 | | | |
| Plate 2 x 2 Corner | Dark Bluish Gray
| 15 | | | |
| Bracket 1 x 1 - 1 x 1 Inverted | Light Bluish Gray
| 6 | | | |
| Plate 2 x 3 | Green
| 12 | | | |
| Plate 2 x 4 | Dark Bluish Gray
| 12 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Light Bluish Gray
| 22 | | | |
| Technic Pin 1/2 with Friction | Red
| 13 | | | |
| Equipment Candlestick | Light Bluish Gray
| 4 | | | |
| Tile 2 x 4 with Groove | Black
| 4 | | | |
| Plate 1 x 2 | Tan
| 21 | | | |
| Tile 45° Cut 2 x 2 (Triangle) | Black
| 14 | | | |
| Brick 1 x 16 | Black
| 2 | | | |
| Minifig Head, Dark Brown Furrowed Eyebrows, White Pupils, Straight Line Mouth (Frown) and Curved Chin Line Print | Light Nougat
| 1 | | | |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | Black
| 8 | | | |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | Black
| 6 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 19 | | | |
| Tile 2 x 2 Curved, Macaroni | Light Bluish Gray
| 8 | | | |
| Wedge Plate 6 x 3 Right | Black
| 18 | | | |
| Wedge Plate 2 x 4 27° Left | Black
| 4 | | | |
| Plate 2 x 6 | Black
| 8 | | | |
| Brick Special 1 x 1 with Headlight and Slot | Dark Bluish Gray
| 8 | | | |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side | Light Bluish Gray
| 6 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Light Bluish Gray
| 18 | | | |
| Wedge Plate 6 x 3 Left | Black
| 18 | | | |
| Weapon Gun / Pistol / Revolver Large Barrel, Long Grip | Dark Bluish Gray
| 5 | | | |
| Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | Light Bluish Gray
| 4 | | | |
| Wedge Plate 2 x 4 27° Right | Black
| 4 | | | |
| Tile Round 1 x 1 Half Circle | Light Bluish Gray
| 11 | | | |
| Wedge Plate 6 x 4 Right | Black
| 4 | | | |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 6 | | | |
| Wedge Plate 6 x 4 Left | Black
| 4 | | | |
| Bar 2L with Stop in Center | Dark Bluish Gray
| 7 | | | |
| Brick 2 x 6 | Black
| 3 | | | |
| Equipment Cup / Teacup Saucer with Recessed Stud on Top [PLAIN] | Black
| 2 | | | |
| Bracket 1 x 1 - 1 x 1 | Black
| 4 | | | |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | Light Bluish Gray
| 2 | | | |
| Tile 2 x 6 | Black
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Light Bluish Gray
| 10 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | White
| 4 | | | |
| Tile 1 x 1 with Groove | Light Bluish Gray
| 9 | | | |
| Tool Welding Gun | Dark Bluish Gray
| 2 | | | |
| Plate Special 4 x 4 with 2 x 2 Cutout | Tan
| 3 | | | |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | Green
| 4 | | | |
| Slope 33° 3 x 2 | Black
| 8 | | | |
| Weapon Gun / Pistol Two Barrel | Dark Bluish Gray
| 4 | | | |
| Hinge Brick 2 x 2 Top Plate Thin | Light Bluish Gray
| 10 | | | |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | Red
| 4 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Black
| 11 | | | |
| Plate 2 x 8 | Black
| 4 | | | |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Light Bluish Gray
| 8 | | | |
| Technic Brick 1 x 10 [9 Pin Holes] | Black
| 2 | | | |
| Plate 2 x 6 | Tan
| 8 | | | |
| Plate 3 x 3 | Black
| 4 | | | |
| Plate Round 1 x 1 with Open Stud | Dark Bluish Gray
| 7 | | | |
| Tile 1 x 4 with Groove | Light Bluish Gray
| 4 | | | |
| Plate Round 1 x 1 with Solid Stud | Tan
| 19 | | | |
| Wedge Plate 6 x 3 Left | Light Bluish Gray
| 4 | | | |
| Technic Beam 1 x 13 Thick | Black
| 2 | | | |
| Brick Special 1 x 2 with 2 Studs on 1 Side | Bright Pink
| 4 | | | |
| Tile Round 1 x 2 | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on Side | Blue
| 6 | | | |
| Bracket 1 x 1 - 1 x 2 Inverted | Dark Bluish Gray
| 4 | | | |
| Brick 2 x 10 | Black
| 1 | | | |
| Plate 2 x 4 | Light Bluish Gray
| 8 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Medium Azure
| 9 | | | |
| Plate Special 1 x 4 Rounded with 2 Open Studs | Red
| 1 | | | |
| Plate Special 2 x 2 with Only 2 studs | Black
| 7 | | | |
| Weapon Gun / Blaster with Studs on Side | Black
| 2 | | | |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | Red
| 4 | | | |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | Light Bluish Gray
| 2 | | | |
| Wedge Plate 6 x 3 Right | Light Bluish Gray
| 4 | | | |
| Bar 3L | Light Bluish Gray
| 6 | | | |
| Plate 2 x 3 with 1 x 1 Cutout | Light Bluish Gray
| 2 | | | |
| Tile 1 x 2 with Groove | Black
| 6 | | | |
| Plate Special 1 x 2 with Door Rail | Light Bluish Gray
| 8 | | | |
| Plate 1 x 6 | Black
| 5 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Light Bluish Gray
| 6 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | Light Bluish Gray
| 16 | | | |
| Wedge Plate 2 x 2 Cut Corner | Black
| 4 | | | |
| Plate 2 x 2 | Orange
| 14 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Lime
| 4 | | | |
| Plate 2 x 6 | Light Bluish Gray
| 4 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Blue
| 4 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | White
| 4 | | | |
| Brick Special 1 x 1 with Studs on 2 Sides | Light Bluish Gray
| 2 | | | |
| Tile 2 x 3 | Light Bluish Gray
| 2 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Trans-Red
| 2 | | | |
| Plate 4 x 8 | Tan
| 2 | | | |
| Equipment Shovel [Rounded Handle End] | Flat Silver
| 4 | | | |
| Tile 1 x 2 with Groove | Dark Bluish Gray
| 4 | | | |
| Wedge 2 x 2 Facet | Black
| 8 | | | |
| Brick Curved 1 x 2 x 1 No Studs | Light Bluish Gray
| 4 | | | |
| Plate 2 x 8 | Light Bluish Gray
| 2 | | | |
| Slope 33° 3 x 2 | Light Bluish Gray
| 3 | | | |
| Brick Round 1 x 1 Open Stud | Yellow
| 10 | | | |
| Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 5 | | | |
| Plate 2 x 2 Corner | Light Bluish Gray
| 4 | | | |
| Plate 2 x 4 | Lime
| 8 | | | |
| Weapon Gun / Blaster Small (Star Wars) | Black
| 2 | | | |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | White
| 4 | | | |
| Tile Round 1 x 1 with Hollow Bar | Red
| 8 | | | |
| Plate 2 x 2 | Dark Bluish Gray
| 6 | | | |
| Technic Brick 1 x 1 with Pin Hole | Black
| 4 | | | |
| Plate Special 1 x 2 with End Towball | Dark Bluish Gray
| 4 | | | |
| Wedge Plate 3 x 3 Cut Corner | Light Bluish Gray
| 4 | | | |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Black
| 8 | | | |
| Wedge Plate 3 x 2 Left | Black
| 4 | | | |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | Dark Bluish Gray
| 1 | | | |
| Tile Special 2 x 2 Inverted | Black
| 2 | | | |
| Technic Brick 4 x 4 with 2 x 2 Opening | Light Bluish Gray
| 1 | | | |
| Wedge Plate 3 x 2 Right | Black
| 4 | | | |
| Plate 2 x 2 Corner | Red
| 4 | | | |
| Technic Brick 1 x 6 [5 Pin Holes] | Yellow
| 2 | | | |
| Plate 2 x 14 | Black
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Black
| 2 | | | |
| Plate 4 x 4 Corner | Dark Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 with Pin Hole on Top | Light Bluish Gray
| 1 | | | |
| Plate 1 x 2 | Dark Tan
| 6 | | | |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | Light Bluish Gray
| 4 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Light Bluish Gray
| 7 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Black
| 4 | | | |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | Blue
| 8 | | | |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Black
| 4 | | | |
| Plate 3 x 3 | Dark Bluish Gray
| 2 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | Red
| 4 | | | |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | Black
| 13 | | | |
| Wedge Plate 2 x 2 Left | Dark Bluish Gray
| 2 | | | |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | Light Bluish Gray
| 2 | | | |
| Wedge Plate 2 x 2 Right | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 1 x 2/3 with Open Stud | Dark Orange
| 2 | | | |
| Bracket 1 x 2 - 2 x 2 | Dark Bluish Gray
| 5 | | | |
| Bracket 1 x 2 - 2 x 4 | Red
| 2 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Red
| 4 | | | |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | Black
| 4 | | | |
| Plate 1 x 1 x 2/3 with Open Stud | Light Bluish Gray
| 2 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Black
| 2 | | | |
| Plate Special 1 x 1 Rounded with Handle | Black
| 2 | | | |
| Tile Round 1 x 1 with Hollow Bar | Black
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 10 | Black
| 1 | | | |
| Brick 1 x 2 | Red
| 4 | | | |
| Slope 33° 3 x 1 | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | Black
| 4 | | | |
| Hinge Brick 1 x 2 Top Plate Thin | Black
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Black
| 4 | | | |
| Slope 33° 3 x 2 | Dark Bluish Gray
| 1 | | | |
| Tile Round 1 x 1 | Trans-Red
| 7 | | | |
| Plate 1 x 8 | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Black
| 2 | | | |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Light Bluish Gray
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Black
| 5 | | | |
| Technic Pin Connector Round 1L [Beam] | Dark Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Light Bluish Gray
| 4 | | | |
| Brick Special 1 x 1 Studs on 4 Sides | Black
| 1 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Black
| 1 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Bluish Gray
| 3 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Black
| 1 | | | |
| Wedge Plate 2 x 2 Left | Black
| 1 | | | |
| Wedge Plate 4 x 4 Cut Corner | Black
| 4 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Red
| 4 | | | |
| Tile 2 x 2 with Groove | Light Bluish Gray
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 1 Inverted | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Lime
| 4 | | | |
| Slope Curved 4 x 1 Double with No Studs | Light Bluish Gray
| 1 | | | |
| Wedge Plate 2 x 2 Right | Black
| 1 | | | |
| Plate 2 x 3 | Red
| 2 | | | |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Dark Bluish Gray
| 2 | | | |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | Black
| 1 | | | |
| Technic Axle 4 | Black
| 4 | | | |
| Tile Round 1 x 1 Quarter | Red
| 3 | | | |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | Sand Green
| 1 | | | |
| Brick 2 x 4 | Red
| 1 | | | |
| Minifig Shield Rectangular with 4 Studs | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 5.9mm Centre Side Cup | Light Bluish Gray
| 4 | | | |
| Brick Round 1 x 1 Open Stud | Light Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 Quarter | Black
| 3 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 3 | | | |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | Blue
| 2 | | | |
| Tile Round 2 x 2 with Hole | Tan
| 1 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | White
| 2 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Black
| 2 | | | |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Cutout | Black
| 1 | | | |
| Slope Curved 4 x 1 Inverted | Black
| 2 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Red
| 1 | | | |
| Plate Round Corners 2 x 6 Double | Black
| 1 | | | |
| Tile 1 x 4 with Groove | Black
| 1 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Dark Bluish Gray
| 1 | | | |
| Tile Round 1 x 1 | Black
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Clear
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 3 | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 1 with Clip Light [Thick Ring] | Dark Bluish Gray
| 2 | | | |
| Plate Round 1 x 1 with Open Stud | Lime
| 3 | | | |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Black
| 2 | | | |
| Brick 2 x 2 | Black
| 1 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | White
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Black
| 2 | | | |
| Brick Special 1 x 1 with Clip Horizontal | White
| 2 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Dark Bluish Gray
| 2 | | | |
| Wedge Plate 2 x 4 | Light Bluish Gray
| 2 | | | |
| Cone 1 x 1 [Top Groove] | Dark Bluish Gray
| 2 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 2 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Black
| 1 | | | |
| Hinge Plate 2 x 2 Locking with 1 Finger on Top | Black
| 1 | | | |
| Tile Round 1 x 1 with Hollow Bar | Black
| 1 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Clear
| 1 | | | |
| Plate Round 4 x 4 with Pin Hole | Dark Bluish Gray
| 1 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | Black
| 1 | | | |
| Slope Inverted 45° 4 x 2 Double | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Black
| 1 | | | |
| Technic Axle 3 | Yellow
| 1 | | | |