| Helmet, Raised Centre Ridge, Eye Slot, with Black Faceguard Print | Orange
| 1 | | | |
| Cylinder Half 3 x 6 x 6 with 1 x 2 Cutout | Light Bluish Gray
| 4 | | | |
| Technic Brick 1 x 16 [15 Pin Holes] | Dark Bluish Gray
| 9 | | | |
| Brick Round Corner 3 x 3 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch] | Light Bluish Gray
| 12 | | | |
| Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4) | Black
| 10 | | | |
| Minifig Head Fennec Shand, Cheek Lines, Dark Red Lips, Raised Left Eyebrow / Smirk Print | Light Nougat
| 1 | | | |
| Torso Armor, Dark Oranges Stripes on Arms print, Black Arms and Hands (Fennec Shand) | Black
| 1 | | | |
| Plate 2 x 16 | Light Bluish Gray
| 8 | | | |
| Neckwear Cape, Straight Side [Traditional Starched Fabric] | Dark Bluish Gray
| 1 | | | |
| Torso Vest, Dark Blue Collar, Black Waist Print, Nougat Arms, Black Hands | Pearl Titanium
| 1 | | | |
| Minifig Head Cara Dune, Dark Red Lips, Eyebrows, Cheek Lines, Dark Bluish Gray Tattoo, Smile / Angry Print | Nougat
| 1 | | | |
| Sticker Sheet for Set 75315-1 | [No Color/Any Color]
| 1 | | | |
| Plate 6 x 10 | Light Bluish Gray
| 4 | | | |
| Minifig Head Special, Baby / Toddler, Pointy Ears, Black Eyes print (Grogu / The Child / Baby Yoda) | Sand Green
| 1 | | | |
| Baby / Toddler Body with Fixed Arms and Sand Green Hands and Robe print (Grogu / The Child / Baby Yoda) | Dark Tan
| 1 | | | |
| Plate 4 x 10 | Light Bluish Gray
| 5 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 35 | | | |
| Plate 4 x 12 | Light Bluish Gray
| 4 | | | |
| Helmet Dark Trooper | Black
| 1 | | | |
| Tile Round 1 x 1 with Dark Bluish Grey Cockpit print | Trans-Clear
| 3 | | | |
| Minifig Neckwear Armor Shoulder Pads with Control Panel with Red Buttons Print | Black
| 1 | | | |
| Hips and Black Legs with Gray Coattails with Orange Panels Print | Black
| 1 | | | |
| Plate 6 x 8 | Light Bluish Gray
| 4 | | | |
| Plate 2 x 8 | Light Bluish Gray
| 10 | | | |
| Helmet Mandalorian with Holes, Black Visor Print | Flat Silver
| 1 | | | |
| Tile 1 x 6 with Groove | Light Bluish Gray
| 10 | | | |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Dark Bluish Gray
| 9 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Bluish Gray
| 46 | | | |
| Torso Armor with Reddish Brown Bandolier and Belt with Pouches Print, Dark Brown Arms with Armor Panels Print, Black Hands | Dark Brown
| 1 | | | |
| Slope 45° 2 x 8 | Light Bluish Gray
| 4 | | | |
| Minifig Head Dark Trooper, Red Visor, Breathing Mask Print | Black
| 1 | | | |
| Plate 2 x 6 | Dark Bluish Gray
| 18 | | | |
| Hips and Dark Blue Legs with Medium Azure Tunic Tail and Knee Pad Print | Dark Blue
| 1 | | | |
| Plate 4 x 8 | Dark Bluish Gray
| 5 | | | |
| Torso Armor, Dark Trooper, Control Panel with Dark Red Buttons print, Black Arms and Hands | Black
| 1 | | | |
| Tile 2 x 4 with Groove | Light Bluish Gray
| 6 | | | |
| Brick 1 x 4 | Dark Bluish Gray
| 8 | | | |
| Plate 1 x 4 | Black
| 20 | | | |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | Light Bluish Gray
| 11 | | | |
| Slope 30° 1 x 2 x 2/3 | Light Bluish Gray
| 12 | | | |
| Wedge Plate 8 x 8 Cut Corner | Light Bluish Gray
| 10 | | | |
| Wedge 3 x 4 [Stud Notches] | Dark Bluish Gray
| 2 | | | |
| Hips and Dark Brown Legs with Silver Knee Pads Print | Dark Brown
| 1 | | | |
| Hips and Black Legs with Armor Lines, Light Bluish Gray Knees Print | Black
| 1 | | | |
| Slope 18° 4 x 2 | Light Bluish Gray
| 4 | | | |
| Wedge Plate 6 x 12 Left | Light Bluish Gray
| 3 | | | |
| Brick 2 x 4 | Light Bluish Gray
| 6 | | | |
| Plate 2 x 6 | Black
| 11 | | | |
| Tile 1 x 8 with Groove | Dark Bluish Gray
| 6 | | | |
| Wedge Plate 6 x 12 Right | Light Bluish Gray
| 3 | | | |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | Black
| 8 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Light Bluish Gray
| 4 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Light Bluish Gray
| 4 | | | |
| Wheel 31 x 15 Technic, 7 Pin Holes | Light Bluish Gray
| 2 | | | |
| Technic Brick 1 x 10 [9 Pin Holes] | Light Bluish Gray
| 3 | | | |
| Plate 2 x 3 | Black
| 14 | | | |
| Wedge Plate 6 x 3 Left | Light Bluish Gray
| 7 | | | |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | Black
| 56 | | | |
| Technic Pin 1/2 | Blue
| 43 | | | |
| Plate Special 1 x 2 with Door Rail | Dark Bluish Gray
| 16 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Dark Bluish Gray
| 14 | | | |
| Tile 2 x 2 with Groove | Light Bluish Gray
| 6 | | | |
| Tile 1 x 4 with Groove | Dark Bluish Gray
| 6 | | | |
| Wedge Plate 4 x 4 Cut Corner | Light Bluish Gray
| 10 | | | |
| Technic Brick 1 x 8 [7 Pin Holes] | Light Bluish Gray
| 4 | | | |
| Weapon Gun / Blaster Long (Star Wars) | Black
| 2 | | | |
| Plate Special 2 x 2 with Only 2 studs | Dark Bluish Gray
| 9 | | | |
| Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 12 | | | |
| Wedge Plate 6 x 3 Right | Light Bluish Gray
| 7 | | | |
| Wedge Plate 2 x 2 Cut Corner | Light Bluish Gray
| 10 | | | |
| Plate Special 1 x 8 with Door Rail | Light Bluish Gray
| 4 | | | |
| Hair Mid-Length with Part over Front of Right Shoulder | Black
| 1 | | | |
| Plate 4 x 12 | Dark Bluish Gray
| 2 | | | |
| Tile 2 x 3 | Light Bluish Gray
| 4 | | | |
| Tile 1 x 2 with Groove | Dark Bluish Gray
| 8 | | | |
| Tile 1 x 8 with Groove | Light Bluish Gray
| 4 | | | |
| Slope Curved 4 x 1 Inverted | Black
| 16 | | | |
| Technic Axle 12 | Black
| 2 | | | |
| Plate 2 x 4 | Dark Bluish Gray
| 9 | | | |
| Wedge Plate 6 x 6 Cut Corner | Light Bluish Gray
| 6 | | | |
| Wedge Sloped 4 x 2 Triple Left | Light Bluish Gray
| 2 | | | |
| Hips and Black Legs | Black
| 1 | | | |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | Tan
| 8 | | | |
| Tile 2 x 4 with Groove | Dark Bluish Gray
| 3 | | | |
| Brick 1 x 6 | Black
| 3 | | | |
| Plate 2 x 10 | Dark Bluish Gray
| 5 | | | |
| Wedge Plate 4 x 2 Left | Light Bluish Gray
| 3 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Dark Bluish Gray
| 8 | | | |
| Bar Holder with Clip | Black
| 8 | | | |
| Bar 3L | Black
| 9 | | | |
| Plate 1 x 10 | Light Bluish Gray
| 4 | | | |
| Wedge Plate 4 x 2 Right | Light Bluish Gray
| 3 | | | |
| Dish 4 x 4 Inverted with Open Stud [Radar] | Trans-Light Blue
| 3 | | | |
| Slope 45° 2 x 1 with Bottom Pin | Light Bluish Gray
| 12 | | | |
| Plate Round 1 x 1 with Solid Stud | Dark Bluish Gray
| 15 | | | |
| Plate 6 x 6 | Light Bluish Gray
| 2 | | | |
| Technic Brick 1 x 6 [5 Pin Holes] | Dark Bluish Gray
| 4 | | | |
| Plate Round 1 x 1 with Open Stud | Light Bluish Gray
| 13 | | | |
| Brick 1 x 10 | Light Bluish Gray
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Bluish Gray
| 11 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Dark Bluish Gray
| 14 | | | |
| Projectile, Spring Shooter Ammunition 8L Bar | Trans-Bright Green
| 5 | | | |
| Plate 2 x 6 | Light Bluish Gray
| 5 | | | |
| Brick 2 x 2 | Dark Bluish Gray
| 6 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Dark Bluish Gray
| 12 | | | |
| Technic Beam 1 x 11.5 Double Bent Thick | Black
| 4 | | | |
| Tile 1 x 3 | Dark Bluish Gray
| 4 | | | |
| Plate 1 x 3 | Dark Bluish Gray
| 6 | | | |
| Hair Combed Back | Black
| 1 | | | |
| Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 7 teeth | Light Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 8 | | | |
| Plate 2 x 8 | Dark Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Bluish Gray
| 8 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Pearl Titanium
| 3 | | | |
| Wedge 3 x 3 Facet | Dark Bluish Gray
| 6 | | | |
| Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | Black
| 12 | | | |
| Tile 1 x 2 with Groove | Light Bluish Gray
| 4 | | | |
| Brick 1 x 6 | Dark Bluish Gray
| 2 | | | |
| Slope 45° 2 x 2 Double Convex | Light Bluish Gray
| 2 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | Black
| 8 | | | |
| Wedge Plate 3 x 2 Left | Light Bluish Gray
| 3 | | | |
| Plate 4 x 6 | Light Bluish Gray
| 2 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Light Bluish Gray
| 4 | | | |
| Technic Beam 1 x 7 Thick | Black
| 4 | | | |
| Tile Round 1 x 1 with Thermal Detonator Print | Flat Silver
| 2 | | | |
| Bar Holder with Hole and Bar Handle | Black
| 4 | | | |
| Plate 3 x 3 | Dark Bluish Gray
| 4 | | | |
| Wedge Plate 2 x 2 Right | Light Bluish Gray
| 2 | | | |
| Wedge Plate 3 x 2 Right | Light Bluish Gray
| 3 | | | |
| Wedge Plate 2 x 2 Left | Light Bluish Gray
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Light Bluish Gray
| 5 | | | |
| Plate Round 1 x 1 with Solid Stud | Tan
| 13 | | | |
| Brick Round 2 x 2 with Axle Hole | Black
| 4 | | | |
| Technic Beam 1 x 3 Thick | Light Bluish Gray
| 4 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Black
| 11 | | | |
| Brick Round 1 x 1 Open Stud | Dark Bluish Gray
| 6 | | | |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Light Bluish Gray
| 4 | | | |
| Brick Special 1 x 1 Studs on 4 Sides | Light Bluish Gray
| 2 | | | |
| Plate 2 x 3 | Dark Bluish Gray
| 7 | | | |
| Plate 2 x 8 | Tan
| 4 | | | |
| Brick Special 1 x 2 with Grille | Dark Bluish Gray
| 6 | | | |
| Wedge Sloped 4 x 2 Triple Right | Light Bluish Gray
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Light Bluish Gray
| 4 | | | |
| Brick Round 4 x 4 [Centre Hole] | Dark Bluish Gray
| 3 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Metallic Silver
| 2 | | | |
| Plate Round Half 3 x 6 with 1 x 2 Cutout | Light Bluish Gray
| 4 | | | |
| Technic Beam 1 x 11 Thick | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Tan
| 8 | | | |
| Plate Special 2 x 2 with Only 2 studs | Light Bluish Gray
| 5 | | | |
| Plate 6 x 8 | Dark Bluish Gray
| 1 | | | |
| Slope 65° 2 x 1 x 2 | Black
| 4 | | | |
| Tile Special 2 x 2 Inverted | Dark Bluish Gray
| 2 | | | |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | Blue
| 12 | | | |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Black
| 2 | | | |
| Plate 1 x 6 | Dark Bluish Gray
| 4 | | | |
| Weapon Gun / Blaster Short (Star Wars) | Pearl Titanium
| 1 | | | |
| Plate 1 x 8 | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 4 | Tan
| 6 | | | |
| Plate 2 x 16 | Dark Bluish Gray
| 1 | | | |
| Plate 1 x 8 | Light Bluish Gray
| 2 | | | |
| Minifig Head Plain [Hollow Stud] | Black
| 1 | | | |
| Slope 45° 2 x 3 | Black
| 2 | | | |
| Technic Brick 1 x 10 [9 Pin Holes] | Black
| 1 | | | |
| Plate 4 x 6 | Dark Bluish Gray
| 2 | | | |
| Brick 2 x 2 Corner | Black
| 4 | | | |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | Black
| 4 | | | |
| Plate Special 2 x 2 with Only 2 studs | Black
| 4 | | | |
| Plate 1 x 3 | Light Bluish Gray
| 4 | | | |
| Technic Beam 3 x 5 L-Shape Thick | Light Bluish Gray
| 4 | | | |
| Brick 1 x 8 | Dark Bluish Gray
| 1 | | | |
| Brick 1 x 3 | Black
| 2 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | Red
| 8 | | | |
| Slope Curved 4 x 1 Double with No Studs | Light Bluish Gray
| 2 | | | |
| Brick 2 x 4 | White
| 2 | | | |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | Dark Bluish Gray
| 5 | | | |
| Plate 2 x 4 | Light Bluish Gray
| 4 | | | |
| Wedge 2 x 2 Facet | Light Bluish Gray
| 4 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 9 | | | |
| Container Box 2 x 2 x 2 - Top Opening | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | Black
| 6 | | | |
| Plate 4 x 4 | Black
| 2 | | | |
| Plate Round 4 x 4 with Pin Hole | Dark Bluish Gray
| 6 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Light Bluish Gray
| 2 | | | |
| Slope 45° 2 x 4 | Light Bluish Gray
| 2 | | | |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | Light Bluish Gray
| 1 | | | |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 4 | | | |
| Slope 18° 4 x 1 | Dark Bluish Gray
| 2 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black
| 6 | | | |
| Plate Round 6 x 6 with Hole | Light Bluish Gray
| 3 | | | |
| Spoiler 2 x 4 with Handle [Plain] | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Trans-Red
| 6 | | | |
| Slope 45° 2 x 2 | Dark Bluish Gray
| 3 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Black
| 4 | | | |
| Plate 1 x 6 | Light Bluish Gray
| 2 | | | |
| Plate 3 x 3 Cross | Black
| 2 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Black
| 4 | | | |
| Plate 1 x 2 | Black
| 4 | | | |
| Plate 2 x 12 | Black
| 1 | | | |
| Plate 1 x 4 | Dark Bluish Gray
| 3 | | | |
| Brick 2 x 2 | Tan
| 2 | | | |
| Wedge 3 x 3 Facet | Light Bluish Gray
| 2 | | | |
| Wedge Plate 4 x 2 Left | Dark Bluish Gray
| 2 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Bluish Gray
| 6 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Red
| 10 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | Black
| 6 | | | |
| Plate 2 x 2 | Black
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Black
| 2 | | | |
| Brick Round 1 x 1 Open Stud | Red
| 6 | | | |
| Technic Axle 8 | Black
| 1 | | | |
| Wedge Plate 4 x 2 Right | Dark Bluish Gray
| 2 | | | |
| Wedge Plate 6 x 3 Right | Dark Bluish Gray
| 2 | | | |
| Weapon Pike / Spear Flat End | Flat Silver
| 1 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Dark Brown
| 2 | | | |
| Plate 1 x 6 | Black
| 2 | | | |
| Technic Beam 3 x 3 T-Shape Thick | Dark Bluish Gray
| 2 | | | |
| Weapon Gun / Blaster Small (Star Wars) | Black
| 1 | | | |
| Brick 2 x 6 | Light Bluish Gray
| 1 | | | |
| Plate 4 x 4 | Dark Bluish Gray
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 | Black
| 2 | | | |
| Technic Brick 1 x 6 [5 Pin Holes] | Light Bluish Gray
| 1 | | | |
| Technic Axle and Pin Connector Perpendicular | Red
| 4 | | | |
| Tile Round 1 x 1 | Trans-Red
| 7 | | | |
| Wedge Plate 6 x 3 Left | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 14 | Dark Bluish Gray
| 1 | | | |
| Wedge Plate 2 x 2 Cut Corner | Dark Bluish Gray
| 2 | | | |
| Brick 2 x 2 | Black
| 2 | | | |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | Light Bluish Gray
| 4 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Light Bluish Gray
| 4 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Black
| 4 | | | |
| Wedge 4 x 2 Right | Dark Bluish Gray
| 1 | | | |
| Brick Special 1 x 2 with 2 Studs on 1 Side | Tan
| 2 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 2 | | | |
| Brick 1 x 2 | Black
| 2 | | | |
| Slope Curved 2 x 1 Inverted | Light Bluish Gray
| 2 | | | |
| Wedge 4 x 2 Left | Dark Bluish Gray
| 1 | | | |
| Brick Special 1 x 4 with Groove | Light Bluish Gray
| 2 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 4 | | | |
| Slope Inverted 45° 2 x 1 | Dark Bluish Gray
| 2 | | | |
| Brick 1 x 2 | Light Bluish Gray
| 1 | | | |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | Light Bluish Gray
| 2 | | | |
| Tile 2 x 2 with Groove | Black
| 1 | | | |
| Cone 1 x 1 [Top Groove] | Dark Bluish Gray
| 4 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | Dark Bluish Gray
| 4 | | | |
| Technic Axle 2 Notched | Red
| 7 | | | |
| Technic Beam 1 x 3 Thick | Dark Bluish Gray
| 2 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Dark Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 [Open O Top Clip] | Black
| 5 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 2 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Dark Bluish Gray
| 2 | | | |
| Wedge Plate 2 x 2 Left | Dark Bluish Gray
| 1 | | | |
| Wedge Plate 2 x 2 Right | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 2 | Red
| 2 | | | |
| Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | Light Bluish Gray
| 3 | | | |
| Slope Curved 4 x 1 Double with No Studs | Dark Bluish Gray
| 1 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Dark Bluish Gray
| 2 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | Light Bluish Gray
| 4 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Red
| 3 | | | |
| Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | Dark Bluish Gray
| 2 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Black
| 2 | | | |
| Technic Beam 3 x 3 T-Shape Thick | Black
| 1 | | | |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | Dark Bluish Gray
| 2 | | | |
| Technic Axle 6 | Black
| 1 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Black
| 2 | | | |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | Black
| 2 | | | |
| Plate Special 2 x 2 with 2 Pin Holes | Light Bluish Gray
| 2 | | | |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Dark Bluish Gray
| 2 | | | |
| Technic Axle 4 | Red
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Dark Bluish Gray
| 2 | | | |
| Technic Axle Pin with Friction Ridges Lengthwise | Blue
| 4 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Black
| 1 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Light Bluish Gray
| 2 | | | |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | Light Bluish Gray
| 2 | | | |
| Turntable 4 x 4 Square Base, Locking | Black
| 2 | | | |
| Brick Special 1 x 2 with Handle | Dark Bluish Gray
| 2 | | | |
| Equipment Space Binoculars / Scanner / Electrobinoculars | Dark Bluish Gray
| 1 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Dark Bluish Gray
| 1 | | | |
| Tile Round 2 x 2 with Hole | Red
| 1 | | | |
| Plate Special 2 x 2 with Pin on Bottom | Dark Tan
| 2 | | | |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | Light Bluish Gray
| 1 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Black
| 1 | | | |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | Light Bluish Gray
| 2 | | | |
| Wedge Plate 3 x 6 Cut Corners | Light Bluish Gray
| 1 | | | |
| Equipment Cup / Mug [Plain] | Red
| 1 | | | |
| Technic Axle 5 with Stop | Reddish Brown
| 1 | | | |
| Wedge Plate 2 x 4 | Light Bluish Gray
| 1 | | | |
| Panel 1 x 2 x 1 [Rounded Corners] | Red
| 1 | | | |