 | Hose Rigid 3mm D. 8L / 6.4cm   | Light Bluish Gray
| 2 | $0.70 | $1.41 | |
 | Slope Curved 2 x 2 x 2/3 Inverted | Light Bluish Gray
| 6 | $0.14 | $0.81 | |
 | Bracket 1 x 1 - 1 x 1 | Dark Orange
| 8 | $0.09 | $0.76 | |
 | Tile 2 x 4 with Groove | Dark Tan
| 4 | $0.19 | $0.76 | |
 | Lever Small Base with Light Bluish Gray Lever | Light Bluish Gray
| 2 | $0.37 | $0.73 | |
 | Plate Special 1 x 1 Rounded with Handle | Reddish Brown
| 6 | $0.11 | $0.65 | |
 | Wedge Plate 3 x 2 Left | Dark Tan
| 4 | $0.15 | $0.59 | |
 | Minifig Neckwear Baby Carrier | Dark Tan
| 1 | $0.55 | $0.55 | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4271344.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | Dark Bluish Gray
| 4 | $0.14 | $0.54 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray
| 8 | $0.07 | $0.54 | |
 | Wedge Plate 3 x 2 Right | Dark Tan
| 4 | $0.12 | $0.49 | |
 | Plate Round 1 x 1 with Open Stud | Black
| 8 | $0.05 | $0.43 | |
 | Tile Round 1 x 1 with Hollow Bar | Light Bluish Gray
| 6 | $0.07 | $0.41 | |
 | Minifig Neckwear Backpack Non-Opening | Reddish Brown
| 1 | $0.41 | $0.41 | |
 | Tile Special 1 x 2 Grille with Bottom Groove | Reddish Brown
| 5 | $0.08 | $0.41 | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4267996.jpg) | Dish 2 x 2 Inverted [Radar] | Reddish Brown
| 4 | $0.09 | $0.38 | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole, 7 Teeth | Black
| 3 | $0.12 | $0.37 | |
 | Bar 4L (Lightsaber Blade / Wand) | Light Bluish Gray
| 3 | $0.12 | $0.37 | |
 | Bracket 1 x 1 - 1 x 1 Inverted | Light Bluish Gray
| 2 | $0.18 | $0.35 | |
![Image of part Arm Mechanical with 2 Clips [Battle Droid]](https://cdn.rebrickable.com/media/parts/elements/4210900.jpg) | Arm Mechanical with 2 Clips [Battle Droid] | Dark Bluish Gray
| 3 | $0.11 | $0.32 | |
 | Wedge Plate 3 x 3 Cut Corner | Reddish Brown
| 4 | $0.08 | $0.32 | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045943.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Dark Tan
| 4 | $0.08 | $0.32 | |
 | Bar Holder with Clip | Dark Bluish Gray
| 4 | $0.08 | $0.32 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6101254.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Tan
| 4 | $0.08 | $0.32 | |
 | Slope Curved 2 x 1 Inverted | Dark Bluish Gray
| 2 | $0.15 | $0.30 | |
 | Tile Special 1 x 2 Grille with Bottom Groove | Tan
| 5 | $0.05 | $0.27 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Bluish Gray
| 5 | $0.05 | $0.27 | |
 | Projectile, Spring Shooter Ammunition 8L Bar | Flat Silver
| 2 | $0.14 | $0.27 | |
 | Plate Special 1 x 2 with Clip Horizontal on Side | Tan
| 2 | $0.14 | $0.27 | |
 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | Light Bluish Gray
| 4 | $0.07 | $0.27 | |
 | Plate 1 x 4 | Dark Tan
| 4 | $0.07 | $0.27 | |
 | Plate 2 x 4 | Dark Tan
| 4 | $0.07 | $0.27 | |
 | Plate 1 x 2 | Trans-Clear
| 2 | $0.14 | $0.27 | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6335378.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Light Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Light Bluish Gray
| 3 | $0.08 | $0.24 | |
 | Plate 2 x 8 | Dark Tan
| 2 | $0.12 | $0.24 | |
 | Plate Special 1 x 2 with Door Rail | Dark Tan
| 4 | $0.05 | $0.22 | |
 | Tile Round 1 x 1 with Hollow Bar | Black
| 4 | $0.05 | $0.22 | |
 | Brick 2 x 2 without Inside Ridges | Trans-Clear
| 1 | $0.22 | $0.22 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs | Reddish Brown
| 3 | $0.07 | $0.20 | |
 | Plate 2 x 3 | Dark Bluish Gray
| 3 | $0.07 | $0.20 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs | Light Bluish Gray
| 3 | $0.07 | $0.20 | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | Black
| 3 | $0.07 | $0.20 | |
 | Bar 3L | Reddish Brown
| 3 | $0.07 | $0.20 | |
 | Technic Axle Connector Hub with 4 Bars at 90°, Reinforced Axle Hole | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Bar 6L with Stop Ring | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Slope Curved 4 x 1 Inverted | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4211477.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | Light Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Hinge Brick 1 x 2 Top Plate Thin | Black
| 1 | $0.19 | $0.19 | |
 | Plate Round 2 x 2 with Pin Hole and 4 Bars Up | Reddish Brown
| 1 | $0.19 | $0.19 | |
 | Plate 4 x 6 | Tan
| 1 | $0.18 | $0.18 | |
 | Weapon Gun / Blaster Small (Star Wars) | Black
| 1 | $0.18 | $0.18 | |
 | Plate 1 x 2 | Tan
| 3 | $0.05 | $0.16 | |
 | Weapon Lightsaber Hilt with Bottom Ring | Dark Brown
| 2 | $0.08 | $0.16 | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6029889.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Tan
| 4 | $0.04 | $0.16 | |
 | Wedge Plate 2 x 2 Cut Corner | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 5 | $0.03 | $0.14 | |
 | Wedge Plate 4 x 4 Cut Corner | Tan
| 2 | $0.07 | $0.14 | |
 | Plate Special 1 x 2 with Wheel Holder, Single Slit | Light Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Plate Round Half 4 x 8 | Tan
| 2 | $0.07 | $0.14 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6028813.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Light Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Plate 1 x 2 | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Hinge Brick 1 x 2 Base | Dark Bluish Gray
| 1 | $0.14 | $0.14 | |
 | Slope 30° 1 x 2 x 2/3 | Reddish Brown
| 2 | $0.07 | $0.14 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | Light Bluish Gray
| 3 | $0.04 | $0.12 | |
 | Plate Round 4 x 4 with 2 x 2 Round Opening | Light Bluish Gray
| 1 | $0.12 | $0.12 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Tan
| 3 | $0.04 | $0.12 | |
 | Bar 1L with Top Stud and Two Side Studs | Reddish Brown
| 1 | $0.12 | $0.12 | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4587212.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Dark Bluish Gray
| 3 | $0.04 | $0.12 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | Black
| 3 | $0.04 | $0.12 | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289538.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Black
| 2 | $0.05 | $0.11 | |
 | Plate 2 x 2 | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | Black
| 1 | $0.11 | $0.11 | |
 | Slope Curved 2 x 2 with Stud Notches | Light Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Technic Axle Connector Hub with 4 Bars at 90°, Reinforced Axle Hole | Reddish Brown
| 1 | $0.11 | $0.11 | |
 | Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone) | Light Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Slope Curved 2 x 2 x 2/3 Inverted | Black
| 1 | $0.09 | $0.09 | |
 | Bracket 1 x 1 - 1 x 1 | Light Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Plate 2 x 6 | Dark Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | Dark Bluish Gray
| 3 | $0.03 | $0.08 | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | Dark Bluish Gray
| 3 | $0.03 | $0.08 | |
 | Plate Round 1 x 1 with Solid Stud | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 1 | $0.08 | $0.08 | |
 | Equipment Saucepan | Black
| 1 | $0.08 | $0.08 | |
 | Slope 30° 1 x 2 x 2/3 | Tan
| 1 | $0.08 | $0.08 | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211512.jpg) | Dish 2 x 2 Inverted [Radar] | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Plate Special 1 x 2 with Door Rail | Light Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Tile 2 x 2 with Groove | Dark Tan
| 1 | $0.07 | $0.07 | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | Light Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Technic Axle 2 Notched | Black
| 1 | $0.05 | $0.05 | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 2 | $0.03 | $0.05 | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6257604.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | Reddish Brown
| 1 | $0.05 | $0.05 | |
 | Plate 2 x 4 | Reddish Brown
| 1 | $0.05 | $0.05 | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512360.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation] | Light Bluish Gray
| 1 | $0.05 | $0.05 | |
![Image of part Animal Body Part, Dog Bone [Short]](https://cdn.rebrickable.com/media/parts/elements/4600294.jpg) | Animal Body Part, Dog Bone [Short] | White
| 2 | $0.03 | $0.05 | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4655257.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | Tan
| 2 | $0.03 | $0.05 | |
 | Plate Special 1 x 2 with Pin Hole on Top | Dark Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Flame / Headwear Accessory Plume / Feather, Triple Point | Trans-Orange
| 2 | $0.03 | $0.05 | |
 | Plate Special 1 x 2 with Pin Hole Underneath | Reddish Brown
| 1 | $0.04 | $0.04 | |
 | Plate Special 2 x 2 with Wheel Holders | Light Bluish Gray
| 1 | $0.04 | $0.04 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529242.jpg) | Cone 1 x 1 [Top Groove] | Reddish Brown
| 1 | $0.04 | $0.04 | |
 | Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and '+' Axle Hole, 7 Teeth | Light Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Plate Special 1 x 4 Offset with Bar Holes | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Technic Axle 5 | Light Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Technic Axle 4 | Black
| 1 | $0.04 | $0.04 | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6257599.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | Dark Tan
| 1 | $0.04 | $0.04 | |
 | Tile Special 1 x 2 Grille with Bottom Groove | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
