| Helmet, Elongated Back, with Black Visor Pattern | Pearl Gold
| 1 | | | |
| Neckwear Cape, Standard [Traditional Starched Fabric] | White
| 1 | | | |
| Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | Light Bluish Gray
| 2 | | | |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Dark Bluish Gray
| 17 | | | |
| Cylinder Half 2 x 4 x 4 | White
| 4 | | | |
| Minifig Head Poe Dameron / Razor Fist, Eyebrows, Stubble, White Pupils Smiling / Open Mouth Scowling Print | Light Nougat
| 1 | | | |
| Sticker Sheet for Set 75249-1 | [No Color/Any Color]
| 1 | | | |
| Leg Mechanical - Droid with Technic Pin | Dark Turquoise
| 2 | | | |
| Minifig Head, Eyebrows, Cheek, Chin and Forehead Dimple Print | Light Nougat
| 1 | | | |
| Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | White
| 4 | | | |
| Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole, 9 Teeth | Light Bluish Gray
| 16 | | | |
| Technic Axle 7 | Light Bluish Gray
| 25 | | | |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | Light Bluish Gray
| 19 | | | |
| Torso Jumpsuit with Gold Collar and Belt, and Vertical Lines Print, Dark Red Arms and Hands | Dark Red
| 1 | | | |
| Helmet Snowtrooper | White
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Light Bluish Gray
| 12 | | | |
| Hips and White Legs with First Order Snowtrooper Armor | White
| 1 | | | |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | White
| 6 | | | |
| Torso Armor, First Order Snowtrooper Print, White Arms and Hands | White
| 1 | | | |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | White
| 10 | | | |
| Technic Brick 1 x 12 [11 Pin Holes] | Dark Bluish Gray
| 2 | | | |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | Light Bluish Gray
| 10 | | | |
| Windscreen 7 x 4 x 1 2/3 with Hinges with Light Bluish Grey, White Cockpit print | Trans-Brown
| 1 | | | |
| Weapon Gun / Pistol Flintlock | Pearl Titanium
| 3 | | | |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | Flat Silver
| 6 | | | |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | White
| 12 | | | |
| Brick Curved 1 x 2 x 1 No Studs | Light Bluish Gray
| 8 | | | |
| Technic Brick 6 x 8 with 4 x 6 Opening | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Light Bluish Gray
| 8 | | | |
| Technic Axle and Pin Connector Angled #1 | Light Bluish Gray
| 8 | | | |
| Technic Brick 1 x 10 [9 Pin Holes] | Light Bluish Gray
| 2 | | | |
| Plate 1 x 6 | Light Bluish Gray
| 6 | | | |
| Plate 1 x 2 | White
| 12 | | | |
| Technic Brick 4 x 4 with 2 x 2 Opening | Light Bluish Gray
| 2 | | | |
| Tile Round 2 x 2 with Hole | Light Bluish Gray
| 4 | | | |
| Hair Swept Left Tousled [Plain] | Black
| 1 | | | |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Black
| 3 | | | |
| Plate 1 x 4 | White
| 7 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 29 | | | |
| Technic Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced | Light Bluish Gray
| 4 | | | |
| Brick Special 1 x 2 with Grille | Dark Bluish Gray
| 7 | | | |
| Technic Brick 1 x 8 [7 Pin Holes] | Light Bluish Gray
| 2 | | | |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | Dark Bluish Gray
| 8 | | | |
| Tile 2 x 2 Curved, Macaroni | Light Bluish Gray
| 4 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Light Bluish Gray
| 8 | | | |
| Slope 30° 1 x 2 x 2/3 | Light Bluish Gray
| 4 | | | |
| Plate 2 x 2 Corner | Dark Bluish Gray
| 6 | | | |
| Brick Round 1 x 1 Open Stud | Dark Bluish Gray
| 6 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Light Bluish Gray
| 11 | | | |
| Technic Engine Crankshaft | Light Bluish Gray
| 3 | | | |
| Plate Round 1 x 1 with Solid Stud | Dark Bluish Gray
| 9 | | | |
| Technic Axle 8 | Black
| 2 | | | |
| Plate 1 x 1 | White
| 8 | | | |
| Bag / Messenger Pouch with Long Strap | Medium Nougat
| 1 | | | |
| Weapon Gun / Blaster Small (Star Wars) | Flat Silver
| 1 | | | |
| Weapon Gun / Blaster Short (Star Wars) | Black
| 1 | | | |
| Plate 1 x 8 | Dark Bluish Gray
| 2 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Bluish Gray
| 10 | | | |
| Minifig Head Plain [Hollow Stud] | Black
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | White
| 2 | | | |
| Plate 4 x 6 | Dark Bluish Gray
| 2 | | | |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | White
| 2 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | White
| 2 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Light Bluish Gray
| 7 | | | |
| Plate 1 x 3 | Light Bluish Gray
| 4 | | | |
| Dish 2 x 2 Inverted [Radar] | Trans-Dark Pink
| 6 | | | |
| Tile 1 x 4 with Groove | Light Bluish Gray
| 2 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 4 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | White
| 2 | | | |
| Bar 6L with Stop Ring | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 [Top Clip] | Light Bluish Gray
| 10 | | | |
| Plate Special 2 x 2 with Only 2 studs | Light Bluish Gray
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 with Dark Red Horizon Screen and Gold Switches and Buttons Print | Dark Bluish Gray
| 1 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Light Bluish Gray
| 2 | | | |
| Plate 4 x 10 | Dark Bluish Gray
| 1 | | | |
| Slope Curved 2 x 1 Inverted | White
| 2 | | | |
| Technic Knob Wheel | Black
| 3 | | | |
| Bar 1 x 3 [Clip / Anti-Stud] | Light Bluish Gray
| 2 | | | |
| Tile 1 x 3 | Light Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Light Bluish Gray
| 2 | | | |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | Dark Bluish Gray
| 4 | | | |
| Brick 2 x 6 | Black
| 1 | | | |
| Bar 3L | Light Bluish Gray
| 3 | | | |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | White
| 2 | | | |
| Tile 1 x 1 with Groove | Light Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 with Door Rail | Light Bluish Gray
| 4 | | | |
| Tile 2 x 2 Curved, Macaroni | White
| 2 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Light Bluish Gray
| 2 | | | |
| Plate Round 4 x 4 with 2 x 2 Round Opening | Light Bluish Gray
| 2 | | | |
| Plate 2 x 3 | Dark Bluish Gray
| 4 | | | |
| Plate 2 x 6 | Light Bluish Gray
| 2 | | | |
| Wedge Plate 12 x 3 Left | White
| 1 | | | |
| Lattice 3 x 6 Module with Studs | White
| 1 | | | |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Dark Bluish Gray
| 3 | | | |
| Wedge Plate 12 x 3 Right | White
| 1 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Light Bluish Gray
| 2 | | | |
| Technic Steering Wheel Small (3 Studs Diameter) | Light Bluish Gray
| 2 | | | |
| Plate 2 x 3 | Light Bluish Gray
| 3 | | | |
| Projectile, Spring Shooter Ammunition 8L Bar | Trans-Red
| 3 | | | |
| Tile Round 1 x 1 with Hollow Bar | Light Bluish Gray
| 3 | | | |
| Brick Round 2 x 2 [Grill] | Light Bluish Gray
| 2 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Black
| 3 | | | |
| Wedge Plate 2 x 2 Left | White
| 1 | | | |
| Pneumatic T-Piece (T Bar) [New Style] | Black
| 2 | | | |
| Plate Round 4 x 4 with Pin Hole | White
| 2 | | | |
| Wedge Plate 2 x 2 Right | White
| 1 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Red
| 1 | | | |
| Plate 1 x 3 | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Red
| 1 | | | |
| Bracket 1 x 1 - 1 x 1 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 4 | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 4 Offset with Bar Holes | Light Bluish Gray
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | White
| 4 | | | |
| Tile 2 x 3 | White
| 1 | | | |
| Plate Round 4 x 4 with Pin Hole | Red
| 2 | | | |
| Technic Pin 1/2 | Blue
| 7 | | | |
| Plate Special 2 x 2 with Only 2 studs | Black
| 2 | | | |
| Plate Special 1 x 4 with 2 Studs | Light Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 2 | | | |
| Brick Special 1 x 1 with Headlight and Slot | White
| 2 | | | |
| Brick Special 1 x 4 with Groove | Light Bluish Gray
| 2 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Light Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 Half Circle | Light Bluish Gray
| 2 | | | |
| Brick 1 x 2 | Light Bluish Gray
| 1 | | | |
| Technic Pin Connector Round 1L [Beam] | Light Bluish Gray
| 2 | | | |
| Brick Round 2 x 2 Truncated Cone | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Bluish Gray
| 2 | | | |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 2 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | White
| 2 | | | |
| Tile Round 1 x 1 Quarter | White
| 3 | | | |
| Wedge Plate 3 x 3 Cut Corner | White
| 2 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Dark Bluish Gray
| 1 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | White
| 2 | | | |
| Technic Beam 1 x 2 Thin | Black
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | White
| 1 | | | |
| Brick Round 2 x 2 with Axle Hole | Black
| 1 | | | |
| Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | Dark Bluish Gray
| 2 | | | |
| Tile 1 x 2 with Groove | Tan
| 1 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 3 | | | |
| Brick Special 2 x 2 with 2 Pins and Axle Hole | Light Bluish Gray
| 2 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | White
| 2 | | | |
| Wedge Plate 4 x 2 Left | White
| 1 | | | |
| Plate 2 x 2 | White
| 2 | | | |
| Wedge Plate 4 x 2 Right | White
| 1 | | | |
| Wedge Curved Inverted 6 x 4 | White
| 1 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Black
| 1 | | | |
| Technic Gear 12 Tooth Double Bevel | Black
| 1 | | | |
| Slope Inverted 45° 2 x 1 | White
| 2 | | | |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | Dark Bluish Gray
| 2 | | | |
| Tile Round 2 x 2 with Hole | Dark Bluish Gray
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | White
| 2 | | | |
| Plate Special 2 x 2 with Only 2 studs | Tan
| 1 | | | |
| Brick Special 1 x 2 with Handle | Light Bluish Gray
| 2 | | | |
| Cone 1 x 1 [Top Groove] | Red
| 3 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 9 Teeth | Dark Bluish Gray
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | White
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Bluish Gray
| 1 | | | |
| Technic Pin 1/2 with 2L Bar Extension | Light Bluish Gray
| 2 | | | |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Light Bluish Gray
| 2 | | | |
| Technic Axle 5.5 with Stop [Rounded Short End] | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 2 | Light Bluish Gray
| 1 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth | Light Bluish Gray
| 1 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Red
| 1 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Dark Bluish Gray
| 1 | | | |
| Wedge Plate 2 x 4 | White
| 1 | | | |
| Tile Special 1 x 2 with Handle | Tan
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | White
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Light Bluish Gray
| 1 | | | |
| Technic Axle 2 Notched | Red
| 1 | | | |