| Windscreen 8 x 4 x 2 with Handle and 2 Studs with Sand Blue Cockpit Window Frames Print | Trans-Clear
| 1 | | | |
| Sticker Sheet for Set 75218-1 | [No Color/Any Color]
| 1 | | | |
| Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes | Flat Silver
| 4 | | | |
| Rubber Belt Small [15mm ID] [Round Cross Section] | White
| 4 | | | |
| Minifig Head Biggs Darklighter, Dual Sided, Eyebrows and Moustache, Medium Nougat Cheek Lines, Smile / Nervous Smile Print [Hollow Stud] | Light Nougat
| 1 | | | |
| Hips and Orange Legs with Rebel Pilot Flight Suit with Hose End Print | Light Bluish Gray
| 1 | | | |
| Hips and Orange Legs with Rebel Pilot Flight Suit with Hose End Print | Light Bluish Gray
| 1 | | | |
| Plate 6 x 6 | White
| 4 | | | |
| Window 1 x 4 x 1 2/3 with Spoked Rounded Top | White
| 12 | | | |
| Torso Rebel Pilot with White Flight Suit Print, Orange Arms, Black Hands | Orange
| 1 | | | |
| Torso Rebel Pilot with White Flight Suit Print, Orange Arms, Black Hands | Orange
| 1 | | | |
| Leg Mechanical - Droid with Technic Pin | Flat Silver
| 2 | | | |
| Leg Mechanical - Droid with Technic Pin | White
| 2 | | | |
| Brick Round 2 x 2 Dome Top with Lavender Dots, Dark Blue Print (R2-D2) | Flat Silver
| 1 | | | |
| Plate 1 x 4 | Dark Bluish Gray
| 26 | | | |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | White
| 4 | | | |
| Minifig Head Luke Skywalker / Gunther, Closed Mouth, Dark Tan Eyebrows, Frown / Slight Smile Print | Light Nougat
| 1 | | | |
| Plate Round 1 x 1 with Solid Stud | Dark Bluish Gray
| 36 | | | |
| Barrel 2 x 2 x 2 | Dark Bluish Gray
| 4 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | White
| 12 | | | |
| Tile 1 x 1 with Groove | Sand Blue
| 12 | | | |
| Plate 2 x 2 Corner | Light Bluish Gray
| 12 | | | |
| Tool Ice Axe [3-Rib Handle] | Light Bluish Gray
| 5 | | | |
| Slope Inverted 45° 2 x 2 Double Convex | White
| 2 | | | |
| Brick Round 2 x 2 x 2 Robot Body with Gray and Dark Blue R2-D2 Print | White
| 1 | | | |
| Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar | Light Bluish Gray
| 4 | | | |
| Tile 2 x 3 | White
| 6 | | | |
| Bar 8L - Two Stop Rings / One Pin, Technic Figure Ski Pole [Flat End] | Light Bluish Gray
| 4 | | | |
| Plate 2 x 10 | White
| 4 | | | |
| Plate 1 x 3 | Black
| 8 | | | |
| Slope 33° 3 x 4 | White
| 4 | | | |
| Plate Special 1 x 2 with Pin Hole on Top | Dark Bluish Gray
| 28 | | | |
| Brick 1 x 2 | Light Bluish Gray
| 5 | | | |
| Plate 4 x 4 | Light Bluish Gray
| 4 | | | |
| Plate 1 x 8 | Dark Bluish Gray
| 4 | | | |
| Plate 1 x 8 | Light Bluish Gray
| 4 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Light Bluish Gray
| 12 | | | |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | White
| 4 | | | |
| Technic Plate 2 x 8 [7 Holes] | Light Bluish Gray
| 2 | | | |
| Windscreen 5 x 2 x 1 2/3 | White
| 2 | | | |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | White
| 3 | | | |
| Plate 1 x 8 | White
| 4 | | | |
| Plate 2 x 4 | Dark Bluish Gray
| 7 | | | |
| Plate 1 x 2 | Dark Bluish Gray
| 10 | | | |
| Plate 1 x 6 | White
| 5 | | | |
| Slope 30° 1 x 2 x 2/3 | White
| 8 | | | |
| Hinge Brick 1 x 4 [Lower] | Dark Red
| 2 | | | |
| Plate 2 x 12 | White
| 2 | | | |
| Technic Pin Connector Round 1L [Beam] | Flat Silver
| 9 | | | |
| Weapon Gun / Pistol / Revolver Large Barrel, Long Grip | Dark Bluish Gray
| 3 | | | |
| Technic Pin Connector Round [Slotted] | Light Bluish Gray
| 4 | | | |
| Hinge Brick 1 x 4 [Upper] | Dark Red
| 2 | | | |
| Tile 1 x 2 with Groove | Dark Red
| 4 | | | |
| Technic Beam 1 x 2 Thin | Light Bluish Gray
| 4 | | | |
| Technic Axle Connector Hub with 3 Axles at 120° | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Medium Blue
| 2 | | | |
| Plate 1 x 2 | White
| 8 | | | |
| Projectile, Spring Shooter Ammunition 8L Bar | Trans-Red
| 6 | | | |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | White
| 4 | | | |
| Technic Pin Connector Round [Slotted] | Black
| 4 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 6 | | | |
| Plate 1 x 2 | Black
| 7 | | | |
| Brick 1 x 1 | Sand Blue
| 4 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Metallic Silver
| 2 | | | |
| Bar 6L with Stop Ring | White
| 4 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 12 | | | |
| Plate Special 1 x 4 with 2 Studs | White
| 3 | | | |
| Tile 2 x 2 with Groove | Dark Red
| 4 | | | |
| Hinge Brick 1 x 2 Top Plate Thin | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | White
| 5 | | | |
| Plate Special 1 x 2 with Door Rail | Dark Bluish Gray
| 6 | | | |
| Brick 1 x 1 | Black
| 4 | | | |
| Brick 1 x 4 | Dark Red
| 2 | | | |
| Weapon Gun / Blaster Small (Star Wars) | Black
| 2 | | | |
| Plate 2 x 4 | White
| 3 | | | |
| Plate 2 x 6 | Red
| 3 | | | |
| Tile 2 x 4 with Groove | White
| 2 | | | |
| Plate 1 x 2 | Dark Red
| 8 | | | |
| Brick 1 x 4 | Light Bluish Gray
| 2 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | White
| 2 | | | |
| Plate 1 x 10 | Dark Red
| 2 | | | |
| Wedge Plate 6 x 12 Right | White
| 2 | | | |
| Plate 1 x 8 | Black
| 2 | | | |
| Wedge Plate 4 x 9 with Stud Notches | White
| 2 | | | |
| Slope 33° 3 x 1 | White
| 4 | | | |
| Dish 2 x 2 Inverted [Radar] | White
| 4 | | | |
| Technic Brick 1 x 6 [5 Pin Holes] | Dark Bluish Gray
| 2 | | | |
| Tile 1 x 4 with Groove | Light Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 | Light Bluish Gray
| 4 | | | |
| Wedge Plate 3 x 2 Right | White
| 3 | | | |
| Tile 1 x 8 with Groove | White
| 2 | | | |
| Brick Special 1 x 2 with Groove | White
| 2 | | | |
| Hinge Brick 1 x 2 Base | Light Bluish Gray
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 | White
| 2 | | | |
| Plate 1 x 3 | White
| 4 | | | |
| Wedge Plate 6 x 12 Left | White
| 2 | | | |
| Plate 4 x 4 Corner | White
| 2 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Black
| 2 | | | |
| Plate 2 x 6 | White
| 2 | | | |
| Hinge Plate 2 x 4 with Articulated Joint - Male | Dark Bluish Gray
| 4 | | | |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | Light Bluish Gray
| 2 | | | |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 4 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Dark Bluish Gray
| 3 | | | |
| Technic Axle and Pin Connector Angled #2 - 180° | Black
| 3 | | | |
| Technic Beam 1 x 5 Thin with Axle Holes on Ends | Light Bluish Gray
| 2 | | | |
| Technic Axle 7 | Light Bluish Gray
| 4 | | | |
| Tile 2 x 2 Corner | White
| 2 | | | |
| Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs | Light Bluish Gray
| 2 | | | |
| Technic Brick 1 x 1 with Pin Hole | Light Bluish Gray
| 4 | | | |
| Tile 1 x 3 | White
| 2 | | | |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Light Bluish Gray
| 2 | | | |
| Slope Curved 4 x 1 Double with No Studs | White
| 2 | | | |
| Plate 2 x 2 Corner | White
| 4 | | | |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Dark Bluish Gray
| 6 | | | |
| Plate 1 x 1 | Bright Light Yellow
| 5 | | | |
| Plate 2 x 4 | Red
| 3 | | | |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | Dark Bluish Gray
| 2 | | | |
| Wedge Plate 3 x 2 Left | White
| 2 | | | |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | Red
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Green
| 2 | | | |
| Brick 1 x 1 | White
| 3 | | | |
| Seat / Chair 2 x 2 with Center Sprue Mark | Black
| 1 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Red
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | White
| 5 | | | |
| Plate 1 x 2 | Bright Light Yellow
| 4 | | | |
| Technic Beam 1 x 3 Thin | White
| 2 | | | |
| Tile 1 x 1 with Groove | White
| 3 | | | |
| Plate 2 x 2 | Black
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 with Buttons And Red Screens Print | Dark Bluish Gray
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Dark Bluish Gray
| 1 | | | |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | Light Bluish Gray
| 2 | | | |
| Plate 1 x 3 | Tan
| 4 | | | |
| Plate 1 x 3 | Dark Bluish Gray
| 2 | | | |
| Cone 1 x 1 [Top Groove] | Trans-Dark Pink
| 4 | | | |
| Plate Round 1 x 1 with Open Stud | White
| 5 | | | |
| Plate 1 x 2 | Blue
| 4 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Light Bluish Gray
| 2 | | | |
| Brick 1 x 3 | White
| 2 | | | |
| Technic Brick 1 x 2 [2 Pin Holes] | White
| 2 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Dark Bluish Gray
| 4 | | | |
| Technic Brick 1 x 1 with Pin Hole | Tan
| 2 | | | |
| Plate 1 x 1 | Light Bluish Gray
| 3 | | | |
| Wedge Curved Inverted 6 x 4 | White
| 2 | | | |
| Launcher, Plate Special 1 x 2 with Mini Blaster | White
| 2 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Flat Silver
| 6 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 9 | | | |
| Brick Special 1 x 2 with 2 Studs on 1 Side | Tan
| 2 | | | |
| Wedge Plate 4 x 4 with 2 x 2 Cutout | Light Bluish Gray
| 1 | | | |
| Wedge Curved 6 x 4 Triple | Light Bluish Gray
| 1 | | | |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | Dark Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Light Bluish Gray
| 4 | | | |
| Plate 1 x 4 | Red
| 2 | | | |
| Hinge Tile 1 x 3 Locking with 1 Finger on Top | Dark Bluish Gray
| 1 | | | |
| Plate 1 x 2 | Tan
| 3 | | | |
| Plate 2 x 3 | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Dark Red
| 2 | | | |
| Plate 2 x 4 | Black
| 2 | | | |
| Technic Axle 8 | Red
| 1 | | | |
| Tile 1 x 2 with Groove | Light Bluish Gray
| 1 | | | |
| Wedge 2 x 2 Facet | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 2 Corner | Black
| 2 | | | |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | Dark Bluish Gray
| 1 | | | |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | Blue
| 4 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Turquoise
| 4 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes | Light Bluish Gray
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | White
| 2 | | | |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 3 | White
| 1 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Yellow
| 4 | | | |
| Tile 1 x 2 with Groove | Sand Blue
| 1 | | | |
| Plate 1 x 10 | Tan
| 1 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Red
| 5 | | | |
| Brick 2 x 2 | Light Bluish Gray
| 1 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Light Bluish Gray
| 4 | | | |
| Technic Engine Crankshaft Center | Tan
| 1 | | | |
| Wedge Plate 3 x 2 Left | Dark Bluish Gray
| 1 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 3 | | | |
| Technic Plate 2 x 6 [5 Holes] | Black
| 1 | | | |
| Technic Axle Connector with Axle Hole | Light Bluish Gray
| 1 | | | |
| Plate Special 3 x 2 with Rounded End, Hole | Light Bluish Gray
| 1 | | | |
| Technic Axle 3 | Light Bluish Gray
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 3 | Green
| 1 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Black
| 2 | | | |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | Black
| 1 | | | |
| Bracket 1 x 2 - 1 x 2 | Black
| 1 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Trans-Light Blue
| 1 | | | |
| Tile 2 x 2 with Groove | White
| 1 | | | |
| Slope 45° 2 x 1 with Bottom Pin | White
| 2 | | | |
| Brick 1 x 1 | Dark Red
| 1 | | | |
| Cone 1 x 1 [Top Groove] | Light Bluish Gray
| 2 | | | |
| Technic Axle 2 Notched | Red
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Red
| 1 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Dark Bluish Gray
| 2 | | | |
| Tap 1 x 1 without Hole in Spout | Light Bluish Gray
| 2 | | | |
| Technic Pin Connector Hub with 2 Perpendicular Axles | Dark Bluish Gray
| 1 | | | |
| Slope Inverted 45° 4 x 2 Double | White
| 2 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Light Bluish Gray
| 1 | | | |
| Plate 1 x 2 | Dark Turquoise
| 2 | | | |
| Technic Axle 5 | Light Bluish Gray
| 2 | | | |
| Brick 2 x 2 | Red
| 1 | | | |
| Technic Pin 1/2 | Blue
| 3 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Yellow
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Bluish Gray
| 1 | | | |
| Plate 2 x 6 | Lime
| 1 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 1 | | | |
| Plate Special 1 x 2 [Top Clip] | Light Bluish Gray
| 2 | | | |
| Dish 2 x 2 Inverted [Radar] | Dark Bluish Gray
| 1 | | | |
| Technic Pin 3/4 | Tan
| 2 | | | |
| Technic Plate 2 x 4 [3 Holes] | Black
| 1 | | | |
| Launcher Trigger, Weapon Gun Trigger | Dark Bluish Gray
| 3 | | | |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | Black
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Yellow
| 1 | | | |
| Tile 1 x 2 with Groove | White
| 1 | | | |
| Plate 2 x 2 | Tan
| 1 | | | |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Door Rail | Dark Tan
| 1 | | | |
| Technic Axle Pin without Friction Ridges Lengthwise | Tan
| 1 | | | |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | Red
| 1 | | | |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | White
| 1 | | | |
| Brick Round 1 x 1 Open Stud | Red
| 1 | | | |
| Technic Axle 5.5 with Stop [Rounded Short End] | Dark Bluish Gray
| 1 | | | |