| Slope Curved 4 x 2 No Studs | White
| 4 | | | |
| Tail 8 x 1 with Stepped Fin | White
| 4 | | | |
| Technic Wedge Belt Wheel [aka Pulley] | White
| 4 | | | |
| Minifig Head, Eyebrows, Cheek Lines and Headset Print | Light Nougat
| 1 | | | |
| Wedge Curved 4 x 4 No Top Studs | Dark Red
| 1 | | | |
| Minifig Head, Dark Brown Furrowed Eyebrows, White Pupils, Straight Line Mouth (Frown) and Curved Chin Line Print | Light Nougat
| 1 | | | |
| Plate 2 x 2 Corner | Black
| 14 | | | |
| Hips and Light Bluish Gray Legs | Light Bluish Gray
| 1 | | | |
| Windscreen 7 x 4 x 2 Round with Handle | Trans-Brown
| 1 | | | |
| Tile 1 x 4 with Black Diagonal Stripes Print | Yellow
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Red
| 10 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | White
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Red
| 8 | | | |
| Plate 2 x 8 | Light Bluish Gray
| 3 | | | |
| Plate 2 x 6 | White
| 4 | | | |
| Hat / Cap Short Curved Bill with Seams and Hole on Top | Dark Tan
| 1 | | | |
| Brick 1 x 6 | Black
| 2 | | | |
| Hair Coiled Texture [Plain] | Black
| 1 | | | |
| Plate 2 x 3 | White
| 4 | | | |
| Bracket 1 x 2 - 2 x 2 | Dark Bluish Gray
| 10 | | | |
| Bar 7 x 3 with Double Clips (Ladder) [Straight Clips] | Yellow
| 1 | | | |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Yellow
| 4 | | | |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | Dark Red
| 1 | | | |
| Plate 1 x 1 | White
| 8 | | | |
| Tool Welding Gun | Dark Bluish Gray
| 1 | | | |
| Technic Engine Crankshaft | Light Bluish Gray
| 3 | | | |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | White
| 4 | | | |
| Weapon Gun / Blaster Short (Star Wars) | Black
| 1 | | | |
| Plate Special 1 x 2 with Door Rail | White
| 4 | | | |
| Plate 4 x 6 | Dark Red
| 1 | | | |
| Slope Inverted 34° 3 x 1 with Internal Stopper | White
| 2 | | | |
| Technic Brick 4 x 4 with 2 x 2 Opening | Light Bluish Gray
| 1 | | | |
| Plate 1 x 6 | Dark Red
| 4 | | | |
| Plate 1 x 8 | White
| 2 | | | |
| Slope Curved 4 x 1 Double with No Studs | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Black
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 | Dark Red
| 3 | | | |
| Plate 2 x 3 | Light Bluish Gray
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Bluish Gray
| 3 | | | |
| Projectile, Spring Shooter Ammunition 8L | Trans-Red
| 4 | | | |
| Tile 1 x 3 | Light Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Trans-Clear
| 2 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Red
| 2 | | | |
| Technic Axle 2 Notched | Black
| 4 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Dark Bluish Gray
| 6 | | | |
| Wedge Curved 10 x 3 Left | White
| 1 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Red
| 4 | | | |
| Plate Special 1 x 4 with 2 Studs | White
| 2 | | | |
| Wedge Plate 6 x 3 Right | White
| 2 | | | |
| Wedge Curved 10 x 3 Right | White
| 1 | | | |
| Technic Beam 1 x 2 Thin | Black
| 2 | | | |
| Wedge Plate 6 x 3 Left | White
| 2 | | | |
| Brick Round 2 x 2 with Axle Hole | Trans-Yellow
| 2 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Red
| 4 | | | |
| Plate 1 x 1 | Dark Red
| 4 | | | |
| Plate 2 x 4 | Dark Red
| 3 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray
| 4 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 3 | | | |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | Light Bluish Gray
| 1 | | | |
| Plate 2 x 6 | Dark Red
| 2 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Light Bluish Gray
| 2 | | | |
| Weapon Gun / Blaster Small (Star Wars) | Black
| 1 | | | |
| Plate Special 1 x 1 with Clip Light [Thick Ring] | Dark Bluish Gray
| 4 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Black
| 4 | | | |
| Plate 2 x 2 | White
| 4 | | | |
| Plate 4 x 4 | Dark Bluish Gray
| 1 | | | |
| Technic Pin Connector Hub with 2 Perpendicular Axles | Black
| 2 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Trans-Clear
| 4 | | | |
| Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | Black
| 2 | | | |
| Plate 1 x 2 | Dark Red
| 4 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | White
| 4 | | | |
| Plate 2 x 8 | Black
| 1 | | | |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | Dark Bluish Gray
| 3 | | | |
| Bar 3L | Black
| 2 | | | |
| Panel 1 x 2 x 1 with Rounded Corners and Central Divider | Black
| 1 | | | |
| Plate 2 x 2 Corner | Dark Bluish Gray
| 2 | | | |
| Brick Curved 6 x 1 Inverted | White
| 2 | | | |
| Wedge 3 x 4 [Stud Notches] | Dark Red
| 1 | | | |
| Brick 1 x 1 | Tan
| 2 | | | |
| Cockpit 6 x 6 x 2 Cabin Base with Technic Holes | Dark Bluish Gray
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Dark Bluish Gray
| 4 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth | White
| 2 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Black
| 4 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Black
| 2 | | | |
| Wedge Plate 4 x 6 Cut Corners | Dark Red
| 1 | | | |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 2 | | | |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | Dark Bluish Gray
| 3 | | | |
| Plate 2 x 2 | Dark Bluish Gray
| 2 | | | |
| Technic Brick 1 x 1 with Pin Hole | Dark Bluish Gray
| 2 | | | |
| Technic Axle 2 Notched | Red
| 6 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Bluish Gray
| 3 | | | |
| Pneumatic Hose Connector with Axle Connector | Dark Bluish Gray
| 2 | | | |
| Wedge Curved Inverted 6 x 2 Right | Light Bluish Gray
| 1 | | | |
| Wedge Curved Inverted 6 x 2 Left | Light Bluish Gray
| 1 | | | |
| Technic Pin Connector Round 1L [Beam] | Dark Bluish Gray
| 2 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Plate 1 x 2 | Black
| 2 | | | |
| Wedge Plate 3 x 2 Left | White
| 1 | | | |
| Plate 2 x 6 | Black
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Yellow
| 2 | | | |
| Wedge Plate 3 x 2 Right | White
| 1 | | | |
| Technic Brick 1 x 2 [2 Pin Holes] | Light Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 | White
| 1 | | | |
| Tile Round 1 x 1 | Trans-Yellow
| 4 | | | |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Yellow
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Clear
| 2 | | | |
| Wedge Plate 6 x 3 Right | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | Black
| 2 | | | |
| Plate 1 x 6 | Dark Bluish Gray
| 1 | | | |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | Dark Red
| 1 | | | |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | Light Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 | Light Bluish Gray
| 2 | | | |
| Wedge Plate 6 x 3 Left | Dark Bluish Gray
| 1 | | | |
| Tile 1 x 2 with Groove | Black
| 1 | | | |
| Box 2 x 2 x 2 [Hollow Studs] | Light Bluish Gray
| 1 | | | |
| Box 2 x 2 x 2 Door with Slot | Light Bluish Gray
| 1 | | | |
| Wedge Plate 2 x 4 | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | White
| 2 | | | |
| Slope Inverted 45° 2 x 1 | Blue
| 2 | | | |
| Technic Axle 5 | Light Bluish Gray
| 2 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 2 | | | |
| Panel 1 x 2 x 1 [Rounded Corners] | Yellow
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on Side | Light Bluish Gray
| 2 | | | |
| Tile Special 1 x 2 with Handle | Black
| 2 | | | |
| Plate Special 1 x 2 [Top Clip] | Light Bluish Gray
| 2 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Yellow
| 2 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Light Bluish Gray
| 2 | | | |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | Black
| 1 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Yellow
| 1 | | | |
| Lever Small Base with Black Lever | Yellow
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Yellow
| 2 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Black
| 1 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black
| 1 | | | |
| Equipment Cup / Mug [Plain] | Red
| 1 | | | |
| Wedge Plate 4 x 4 with 2 x 2 Cutout | Black
| 1 | | | |
| Brick Round 1 x 1 Open Stud | Yellow
| 1 | | | |
| Wedge Plate 2 x 4 | Dark Bluish Gray
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 1 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 2 | | | |
| Technic Pin 1/2 | Light Bluish Gray
| 1 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Green
| 1 | | | |
| Tool Screwdriver and Spanner / Wrench | Black
| 1 | | | |
| Tile Special 1 x 2 with Handle | Yellow
| 1 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Red
| 1 | | | |