 | Nintendo Figure, Hat, Large, with Mario Logo Print   | Red
| 1 | $6.83 | $6.83 | |
 | Nintendo Figure, Hat, Large, with Luigi Logo Print | Bright Green
| 1 | $4.20 | $4.20 | |
 | Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | Light Bluish Gray
| 5 | $0.70 | $3.52 | |
 | Wheel Arch, Mudguard 4 x 2 1/2 x 1 | Medium Nougat
| 1 | $3.09 | $3.09 | |
 | Wheel 24 x 20 with Blue Tire Pattern | Blue
| 4 | $0.63 | $2.52 | |
 | Wheel 24 x 20 with Black Tire Pattern | Black
| 3 | $0.80 | $2.39 | |
 | Slope Curved 2 x 2 with Stud Notch Left | Dark Bluish Gray
| 1 | $2.26 | $2.26 | |
 | Slope Curved 2 x 2 with Stud Notch Right | Dark Bluish Gray
| 1 | $2.26 | $2.26 | |
 | Plate 1 x 1 x 2/3 Half Round with Side Stud | Light Bluish Gray
| 6 | $0.30 | $1.78 | |
 | Plate Special 1 x 2 with Pin Hole On Side | Black
| 2 | $0.87 | $1.74 | |
 | Food Popsicle / Lollipop | Yellow
| 2 | $0.74 | $1.48 | |
 | Arm, with Pin, Light Nougat Hand | Red
| 2 | $0.70 | $1.41 | |
 | Feet, 2 x 2 x 2/3 with 4 Studs on Top | Dark Azure
| 1 | $1.33 | $1.33 | |
 | Plate 2 x 2 Corner | Dark Bluish Gray
| 14 | $0.09 | $1.30 | |
 | Antenna 1 x 4 with Flat Top | Trans-Clear
| 6 | $0.20 | $1.22 | |
 | Arm, with Pin, Light Nougat Hand | Bright Green
| 2 | $0.59 | $1.19 | |
 | Slope Curved 2 x 2 with Stud Notch Left | Green
| 1 | $1.09 | $1.09 | |
 | Slope Curved 2 x 2 with Stud Notch Right | Green
| 1 | $1.09 | $1.09 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Nougat
| 6 | $0.17 | $1.00 | |
 | Bracket 1 x 1 - 1 x 1 | White
| 4 | $0.24 | $0.96 | |
 | Tile 2 x 2 with 'START', Tri-Speeder and Barcode Print (Sticker) | Black
| 1 | $0.93 | $0.93 | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4187750.jpg) | Dish 2 x 2 Inverted [Radar] | Trans-Clear
| 6 | $0.15 | $0.89 | |
 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | Black
| 1 | $0.83 | $0.83 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6093950.jpg) | Technic Pin Connector Round 1L [Beam] | Red
| 4 | $0.20 | $0.81 | |
 | Bracket 1 x 1 - 1 x 1 | Green
| 2 | $0.41 | $0.81 | |
 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | Flat Silver
| 2 | $0.35 | $0.70 | |
 | Plate 1 x 2 | White
| 9 | $0.07 | $0.67 | |
 | Technic Brick 1 x 1 with Pin Hole | Green
| 4 | $0.17 | $0.67 | |
 | Launcher, Weapon Gun / Blaster / Shooter Square | White
| 2 | $0.31 | $0.63 | |
 | Tile 1 x 2 with Black Eyes, Eyebrows, White Pupils print | Light Nougat
| 1 | $0.61 | $0.61 | |
 | Plate Special 1 x 2 with Pin Hole On Side | Red
| 4 | $0.15 | $0.59 | |
 | Tile 1 x 2 with Groove | Reddish Brown
| 4 | $0.15 | $0.59 | |
 | Tile 1 x 8 with Groove | Tan
| 2 | $0.28 | $0.56 | |
 | Tile Round 2 x 2 with Bottom Stud Holder | Light Bluish Gray
| 5 | $0.11 | $0.56 | |
 | Technic Axle and Pin Connector Angled #4 - 135° | Dark Bluish Gray
| 4 | $0.13 | $0.52 | |
 | Feet, 2 x 2 x 2/3 with 4 Studs on Top | Green
| 1 | $0.52 | $0.52 | |
 | Tile 2 x 3 | Dark Bluish Gray
| 2 | $0.26 | $0.52 | |
 | Tile Round 2 x 4 | Black
| 1 | $0.50 | $0.50 | |
 | Bracket 1 x 1 - 1 x 1 Inverted | Light Bluish Gray
| 2 | $0.24 | $0.48 | |
 | Bracket 1 x 1 - 1 x 1 | Dark Bluish Gray
| 2 | $0.24 | $0.48 | |
 | Slope Curved 2 x 1 with Stud Notch Right | Green
| 1 | $0.46 | $0.46 | |
 | Plate Round 1 x 1 with Open Stud | Black
| 6 | $0.07 | $0.44 | |
 | Plate 4 x 4 | Black
| 2 | $0.22 | $0.44 | |
 | Tile 2 x 2 with Groove | Light Bluish Gray
| 2 | $0.22 | $0.44 | |
 | Tile 1 x 2 with Black Eyes, Raised Eyebrows, White Pupils print | Light Nougat
| 1 | $0.44 | $0.44 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Bluish Gray
| 8 | $0.06 | $0.44 | |
 | Slope Curved 2 x 1 with Stud Notch Left | Green
| 1 | $0.43 | $0.43 | |
 | Plate Special 1 x 3 Rounded with 3 Open Studs | Black
| 2 | $0.20 | $0.41 | |
 | Tile Round 2 x 2 with Bottom Stud Holder | Bright Green
| 2 | $0.20 | $0.41 | |
![Image of part Brick Round 2 x 2 Dome Bottom [Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6065839.jpg) | Brick Round 2 x 2 Dome Bottom [Open Stud] | Red
| 3 | $0.13 | $0.39 | |
 | Slope Curved 4 x 1 Double with No Studs | Red
| 3 | $0.13 | $0.39 | |
 | Wedge Plate 2 x 4 | Green
| 1 | $0.39 | $0.39 | |
 | Tile Round 1 x 1 with Hollow Bar | Dark Bluish Gray
| 4 | $0.09 | $0.37 | |
 | Slope Curved 2 x 1 Inverted | White
| 2 | $0.19 | $0.37 | |
 | Plate 3 x 3 | Light Bluish Gray
| 2 | $0.19 | $0.37 | |
 | Brick Round 2 x 2, Pin Holes with Baby Luigi Torso, Green Shirt, Yellow Buttons print | Dark Blue
| 1 | $0.35 | $0.35 | |
 | Tile 2 x 2 with 'START', Biddybuggy and Barcode Print (Sticker) | Black
| 1 | $0.33 | $0.33 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | White
| 6 | $0.06 | $0.33 | |
 | Plate 1 x 1 | Red
| 6 | $0.06 | $0.33 | |
![Image of part Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge]](https://cdn.rebrickable.com/media/parts/elements/6282144.jpg) | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge] | Dark Bluish Gray
| 2 | $0.17 | $0.33 | |
 | Plate 1 x 5 | Medium Nougat
| 2 | $0.17 | $0.33 | |
![Image of part Brick Round 2 x 2 Dome Bottom [Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6104128.jpg) | Brick Round 2 x 2 Dome Bottom [Open Stud] | Lime
| 3 | $0.11 | $0.33 | |
 | Tile Round 1 x 1 | Light Nougat
| 6 | $0.06 | $0.33 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Red
| 4 | $0.07 | $0.30 | |
 | Tile 1 x 1 with Groove | Red
| 4 | $0.07 | $0.30 | |
 | Tile 2 x 2 with Groove | Reddish Brown
| 2 | $0.15 | $0.30 | |
 | Brick Round 2 x 2 Dome Top, Vented Stud | Red
| 3 | $0.09 | $0.28 | |
 | Plate 2 x 4 | Dark Bluish Gray
| 2 | $0.13 | $0.26 | |
 | Slope Curved 3 x 1 No Studs | White
| 2 | $0.13 | $0.26 | |
 | Slope Curved 3 x 1 No Studs | Red
| 2 | $0.13 | $0.26 | |
 | Plate Special 1 x 2 with Pin Hole on Top | Red
| 2 | $0.13 | $0.26 | |
 | Plate 2 x 8 | Dark Bluish Gray
| 1 | $0.24 | $0.24 | |
 | Plate 4 x 6 | Tan
| 1 | $0.24 | $0.24 | |
 | Technic Axle 2 Notched | Red
| 6 | $0.04 | $0.22 | |
 | Plate 1 x 2 | Green
| 3 | $0.07 | $0.22 | |
 | Plate 2 x 2 | Black
| 3 | $0.07 | $0.22 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs | Red
| 2 | $0.11 | $0.22 | |
 | Plate 1 x 6 | Tan
| 2 | $0.11 | $0.22 | |
 | Plate 1 x 1 | Tan
| 4 | $0.06 | $0.22 | |
 | Plate 2 x 2 Corner | Red
| 2 | $0.11 | $0.22 | |
 | Plate 1 x 4 | Green
| 2 | $0.11 | $0.22 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469440.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Green
| 4 | $0.06 | $0.22 | |
 | Technic Pin Long without Friction Ridges, with Anti-Roll Notch | Tan
| 4 | $0.06 | $0.22 | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4516546.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation] | Dark Bluish Gray
| 4 | $0.06 | $0.22 | |
 | Bracket 1 x 2 - 2 x 4 | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Wheel Fork with 2 x 2 Plate | Dark Bluish Gray
| 1 | $0.20 | $0.20 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Red
| 2 | $0.09 | $0.19 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469454.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version | Tan
| 2 | $0.09 | $0.19 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029946.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Red
| 2 | $0.09 | $0.19 | |
 | Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | Light Bluish Gray
| 1 | $0.19 | $0.19 | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4140561.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Tan
| 3 | $0.06 | $0.17 | |
 | Brick Round 2 x 2 Dome Top, Vented Stud | Lime
| 3 | $0.06 | $0.17 | |
| Plate 2 x 6 | Black
| 1 | $0.17 | $0.17 | |
 | Plate 1 x 4 | Reddish Brown
| 2 | $0.07 | $0.15 | |
 | Steering Stand 1 x 2 with Black Steering Wheel | Black
| 2 | $0.07 | $0.15 | |
 | Wave / Flame Rounded with Base Rim | Trans-Orange
| 4 | $0.04 | $0.15 | |
 | Slope 30° 1 x 2 x 2/3 | Red
| 2 | $0.07 | $0.15 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Bluish Gray
| 2 | $0.07 | $0.15 | |
 | Technic Pin 1/2 with Friction | Red
| 2 | $0.07 | $0.15 | |
 | Bracket 1 x 2 - 2 x 2 | Red
| 2 | $0.07 | $0.15 | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Black
| 2 | $0.07 | $0.15 | |
 | Plate 1 x 1 | White
| 2 | $0.07 | $0.15 | |
 | Plate 2 x 2 | Red
| 2 | $0.07 | $0.15 | |
 | Brick Special 1 x 4 with 4 Studs on One Side | Red
| 1 | $0.15 | $0.15 | |
 | Slope Curved 4 x 1 Double with No Studs | Dark Bluish Gray
| 1 | $0.15 | $0.15 | |
 | Plate 2 x 3 | White
| 1 | $0.15 | $0.15 | |
 | Plate 2 x 2 | Reddish Brown
| 2 | $0.06 | $0.11 | |
 | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | Black
| 1 | $0.11 | $0.11 | |
 | Slope Curved 2 x 2 x 2/3 | Green
| 1 | $0.11 | $0.11 | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | Black
| 2 | $0.06 | $0.11 | |
 | Slope 45° 2 x 1 with Bottom Pin | Green
| 2 | $0.06 | $0.11 | |
 | Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Tool Screwdriver and Spanner / Wrench | Flat Silver
| 1 | $0.09 | $0.09 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots | Black
| 2 | $0.04 | $0.07 | |
 | Technic Axle 3 | Yellow
| 2 | $0.04 | $0.07 | |
 | Launcher Trigger, Weapon Gun Trigger | Dark Bluish Gray
| 2 | $0.04 | $0.07 | |
 | Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 2 | $0.04 | $0.07 | |
 | Plate 2 x 4 | Tan
| 1 | $0.07 | $0.07 | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439039.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | Black
| 1 | $0.07 | $0.07 | |
![Image of part Tile Special 2 x 2 with Top Pin [Squared Holes]](https://cdn.rebrickable.com/media/parts/elements/6313189.jpg) | Tile Special 2 x 2 with Top Pin [Squared Holes] | Dark Bluish Gray
| 1 | $0.06 | $0.06 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Light Bluish Gray
| 1 | $0.04 | $0.04 | |
