 | Brick Wedged, Sloped 1 x 5 x 1 1/3 Left  | Red
| 5 | $1.47 | $7.34 | |
 | Brick Wedged, Sloped 1 x 5 x 1 1/3 Right  | Red
| 5 | $1.47 | $7.34 | |
 | Brick Curved 3 x 1 x 2/3  | Red
| 4 | $1.25 | $5.00 | |
 | Tyre 43.2 x 22 ZR  | Black
| 4 | $0.61 | $2.45 | |
 | Wrap with Forehead Ridge with Gold 3 Point Emblem, Bow in Back pattern  | Red
| 1 | $2.34 | $2.34 | |
 | Torso, Robe, Sand Blue/Gold Trim, Dark Red Armor, Straps, Gold Decorations print, Dark Red Arms, Black Hands  | Red
| 1 | $2.26 | $2.26 | |
 | Bracket 1 x 2 - 1 x 2  | Red
| 10 | $0.19 | $1.90 | |
![Image of part Technic Brick 1 x 16 [15 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370326.jpg) | Technic Brick 1 x 16 [15 Pin Holes]  | Black
| 2 | $0.92 | $1.85 | |
 | Brick Sloped 1 x 6 x 1 with 1 x 2 x 1/3 Cutout  | Bright Light Orange
| 2 | $0.92 | $1.85 | |
 | Plate Special 2 x 2 with Horizontal T-Bar Underneath  | Black
| 4 | $0.45 | $1.79 | |
 | Hips and Red Legs with Robe Ends, Gold/Dark Bluish Grey Trim print  | Red
| 1 | $1.74 | $1.74 | |
 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate  | Black
| 3 | $0.56 | $1.67 | |
 | Tile Round 2 x 2 with NINJAGO on Red Banner, Black '15' with Face print  | Pearl Gold
| 1 | $1.66 | $1.66 | |
 | Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge  | Black
| 1 | $1.51 | $1.51 | |
 | Brick Wedged, Curved 3 x 2 with Stud Notch Left  | Red
| 2 | $0.75 | $1.49 | |
 | Brick Wedged, Curved 3 x 2 with Stud Notch Right  | Red
| 2 | $0.71 | $1.41 | |
 | Plate 2 x 3  | Black
| 16 | $0.08 | $1.30 | |
 | Tail Shuttle - Small  | Red
| 1 | $1.17 | $1.17 | |
![Image of part Technic Brick 1 x 3 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/6476051.jpg) | Technic Brick 1 x 3 [3 Pin Holes]  | White
| 2 | $0.56 | $1.11 | |
 | Tile Special 2 x 3 Pentagonal  | Pearl Gold
| 2 | $0.54 | $1.09 | |
![Image of part Technic Shock Absorber 6.5L with Hard Spring, Tight Coils at End, Black Rod [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6378481.jpg) | Technic Shock Absorber 6.5L with Hard Spring, Tight Coils at End, Black Rod [Complete Assembly]  | Red
| 1 | $1.07 | $1.07 | |
 | Plate Special 1 x 2 with Pin Hole On Side  | Light Bluish Gray
| 4 | $0.26 | $1.03 | |
 | Plate 1 x 5  | Yellow
| 2 | $0.49 | $0.98 | |
 | Plate 3 x 3 Corner  | Black
| 6 | $0.16 | $0.98 | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Light Bluish Gray
| 14 | $0.07 | $0.95 | |
 | Technic Panel Curved and Bent Angled Left 5 x 4 x 3 #71  | Black
| 1 | $0.94 | $0.94 | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Black
| 4 | $0.23 | $0.92 | |
 | Technic Panel Curved and Bent Angled Right 5 x 4 x 3 #70  | Black
| 1 | $0.91 | $0.91 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Black
| 11 | $0.08 | $0.90 | |
 | Weapon Sword / Katana / Wakizashi Short  | Pearl Gold
| 4 | $0.22 | $0.87 | |
 | Hair Ponytail Long French Braided  | Dark Brown
| 1 | $0.87 | $0.87 | |
 | Brick Wedged, Curved 2 x 2 with Stud Notch Right  | Red
| 1 | $0.75 | $0.75 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Red
| 9 | $0.08 | $0.73 | |
 | Bracket 1 x 1 - 1 x 1  | Red
| 2 | $0.37 | $0.73 | |
 | Brick Sloped 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Black
| 6 | $0.12 | $0.73 | |
 | Brick Wedged, Curved 2 x 2 with Stud Notch Left  | Red
| 1 | $0.72 | $0.72 | |
 | Brick Wedged, Curved 2 x 1 with Stud Notch Right  | Red
| 4 | $0.18 | $0.71 | |
 | Brick Wedged, Curved 2 x 1 with Stud Notch Left  | Red
| 4 | $0.18 | $0.71 | |
 | Plate 1 x 10  | Red
| 4 | $0.18 | $0.71 | |
 | Plate 2 x 12  | Black
| 3 | $0.22 | $0.65 | |
 | Technic Brick 1 x 1 with Axle Hole  | Black
| 4 | $0.16 | $0.65 | |
 | Brick Sloped Inverted 45° 2 x 1 with 2/3 Cutout  | Dark Bluish Gray
| 4 | $0.16 | $0.65 | |
 | Plate 4 x 6  | Black
| 2 | $0.31 | $0.63 | |
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370226.jpg) | Technic Brick 1 x 8 [7 Pin Holes]  | Black
| 2 | $0.31 | $0.63 | |
 | Brick Sloped 30° 1 x 2 x 2/3  | Black
| 9 | $0.07 | $0.61 | |
 | Technic Pin 1/2  | White
| 4 | $0.15 | $0.60 | |
 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim  | Pearl Gold
| 4 | $0.15 | $0.60 | |
 | Bracket 1 x 2 - 1 x 2  | Black
| 6 | $0.10 | $0.57 | |
 | Plate Special 1 x 4 Rounded with 2 Open Studs  | Light Bluish Gray
| 3 | $0.19 | $0.57 | |
 | Plate 2 x 2  | Medium Lavender
| 1 | $0.56 | $0.56 | |
 | Plate 1 x 1 x 2/3 with Open Stud  | Dark Bluish Gray
| 4 | $0.14 | $0.54 | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Red
| 8 | $0.07 | $0.54 | |
 | Plate 1 x 3  | Black
| 4 | $0.14 | $0.54 | |
 | Technic Pin Long 3l, No Friction Ridges, with Stop and Hole  | Light Bluish Gray
| 4 | $0.14 | $0.54 | |
 | Tile Special 1 x 3 Inverted with Center Hole  | Light Bluish Gray
| 2 | $0.27 | $0.54 | |
 | Tile Special 2 x 2 with 2 Quarter Round Cutouts  | Black
| 2 | $0.26 | $0.52 | |
 | Weapon Sword with Thick Crossguard (Roman Gladius)  | Flat Silver
| 2 | $0.26 | $0.52 | |
 | Bracket 5 x 1 x 1 1/3  | Black
| 2 | $0.24 | $0.49 | |
 | Brick Curved 2 x 2 x 2/3  | Black
| 6 | $0.08 | $0.49 | |
 | Plate 2 x 2 Corner  | Medium Azure
| 2 | $0.24 | $0.49 | |
 | Plate Special 2 x 2 with Only 2 studs  | Tan
| 6 | $0.08 | $0.49 | |
 | Brick Curved Inverted 2 x 1  | Black
| 4 | $0.12 | $0.49 | |
 | Minifig Head Kai, Reddish Brown Eyebrows, Medium Nougat Scar, Bandage, Lopsided Grin with Teeth / Determined Print  | Yellow
| 1 | $0.48 | $0.48 | |
 | Tile 1 x 2 with Stud Notch Left  | Red
| 1 | $0.45 | $0.45 | |
 | Wedge Plate 6 x 2 Right  | Black
| 1 | $0.45 | $0.45 | |
 | Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Black
| 8 | $0.05 | $0.43 | |
 | Technic Beam 3 x 3 L-Shape with Quarter Ellipse Thin  | Black
| 2 | $0.22 | $0.43 | |
 | Brick Curved Inverted 2 x 2 x 2/3  | Dark Bluish Gray
| 2 | $0.22 | $0.43 | |
 | Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder  | Red
| 2 | $0.22 | $0.43 | |
 | Tile 1 x 2 with Stud Notch Right  | Red
| 1 | $0.43 | $0.43 | |
 | Wedge Plate 6 x 2 Left  | Black
| 1 | $0.43 | $0.43 | |
![Image of part Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]](https://cdn.rebrickable.com/media/parts/elements/6116596.jpg) | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]  | Pearl Gold
| 4 | $0.11 | $0.43 | |
 | Plate 1 x 3  | Red
| 6 | $0.07 | $0.41 | |
 | Tyre 30.4 x 14 VR Solid  | Black
| 2 | $0.20 | $0.41 | |
 | Plate 1 x 5  | Black
| 2 | $0.20 | $0.41 | |
 | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)  | Red
| 10 | $0.04 | $0.41 | |
 | Plate Special 1 x 3 Rounded with 3 Open Studs  | Light Bluish Gray
| 1 | $0.38 | $0.38 | |
 | Brick 2 x 2 Corner  | Black
| 4 | $0.10 | $0.38 | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Red
| 4 | $0.10 | $0.38 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6394880.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Red
| 4 | $0.10 | $0.38 | |
 | Brick 1 x 3  | Black
| 2 | $0.19 | $0.38 | |
 | Tile 2 x 2 with Groove  | Red
| 4 | $0.10 | $0.38 | |
 | Plate 2 x 2  | Pearl Gold
| 3 | $0.12 | $0.37 | |
![Image of part Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]](https://cdn.rebrickable.com/media/parts/elements/6116593.jpg) | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]  | Flat Silver
| 2 | $0.18 | $0.35 | |
 | Tile 2 x 4 with Groove  | Red
| 2 | $0.18 | $0.35 | |
 | Brick 2 x 6  | Tan
| 2 | $0.18 | $0.35 | |
 | Plate 2 x 8  | Dark Bluish Gray
| 2 | $0.18 | $0.35 | |
 | Plate 1 x 4  | Black
| 5 | $0.07 | $0.34 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Dark Tan
| 6 | $0.05 | $0.33 | |
 | Brick Curved Inverted 4 x 1  | Black
| 6 | $0.05 | $0.33 | |
 | Plate 2 x 2 Corner  | Red
| 4 | $0.08 | $0.33 | |
 | Weapon Sword Hilt with Dragon Head  | Pearl Gold
| 2 | $0.16 | $0.33 | |
![Image of part Brick Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6435020.jpg) | Brick Curved 2 x 1 No Studs [1/2 Bow]  | Trans-Light Blue
| 2 | $0.16 | $0.33 | |
 | Plate 2 x 3  | Bright Light Orange
| 4 | $0.08 | $0.33 | |
 | Plate 2 x 4  | Black
| 4 | $0.08 | $0.33 | |
 | Plate Special 4 x 4 with 2 x 2 Opening  | Red
| 1 | $0.33 | $0.33 | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Yellow
| 4 | $0.08 | $0.33 | |
 | Tile 45° Cut 2 x 2 (Triangle)  | Red
| 2 | $0.16 | $0.33 | |
 | Plate Round 1 x 1 with Solid Stud  | Tan
| 8 | $0.04 | $0.33 | |
 | Technic Brick 1 x 1 with Axle Hole  | White
| 2 | $0.15 | $0.30 | |
 | Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder  | Black
| 1 | $0.30 | $0.30 | |
 | Tile 1 x 3  | Black
| 2 | $0.15 | $0.30 | |
 | Brick Curved 4 x 2 No Studs  | Black
| 2 | $0.15 | $0.30 | |
 | Brick Curved 4 x 2 No Studs  | Red
| 2 | $0.15 | $0.30 | |
 | Plate 1 x 8  | Red
| 2 | $0.15 | $0.30 | |
 | Bracket 1 x 1 - 1 x 1 Inverted  | Black
| 2 | $0.15 | $0.30 | |
 | Plate Special 1 x 2 with Door Rail  | Black
| 3 | $0.10 | $0.29 | |
 | Plate 1 x 6  | Red
| 3 | $0.10 | $0.29 | |
 | Brick Curved 4 x 1 Double with No Studs  | Red
| 3 | $0.10 | $0.29 | |
 | Brick 1 x 6  | Light Bluish Gray
| 1 | $0.29 | $0.29 | |
 | Wedge Plate 3 x 2 Left  | Red
| 3 | $0.10 | $0.29 | |
 | Brick Wedged, Curved 2 x 2 with Stud Notches  | Red
| 2 | $0.14 | $0.27 | |
 | Tile 1 x 2 with Groove  | Light Bluish Gray
| 2 | $0.14 | $0.27 | |
 | Wheel Fork with 2 x 2 Plate  | Dark Bluish Gray
| 2 | $0.14 | $0.27 | |
 | Plate 1 x 4  | Red
| 4 | $0.07 | $0.27 | |
 | Plate 2 x 2 Corner  | Black
| 4 | $0.07 | $0.27 | |
 | Plate 4 x 4  | Red
| 2 | $0.14 | $0.27 | |
 | Technic Disc 3 x 3  | Black
| 4 | $0.07 | $0.27 | |
 | Brick Curved Inverted 2 x 2 x 2/3  | Light Bluish Gray
| 2 | $0.14 | $0.27 | |
 | Plate 4 x 6  | Red
| 1 | $0.27 | $0.27 | |
 | Technic Beam 1 x 2 Thick  | Lime
| 1 | $0.26 | $0.26 | |
 | Technic Pin 1/2 with Friction  | Dark Bluish Gray
| 3 | $0.08 | $0.24 | |
 | Wedge Plate 3 x 2 Right  | Red
| 3 | $0.08 | $0.24 | |
 | Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate  | Red
| 1 | $0.24 | $0.24 | |
 | Brick Sloped 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Red
| 2 | $0.12 | $0.24 | |
 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper)  | Light Bluish Gray
| 2 | $0.12 | $0.24 | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4213607.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Dark Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Dark Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Plate 1 x 6  | Light Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Tile 1 x 4 with Groove  | Red
| 2 | $0.12 | $0.24 | |
 | Plate 1 x 1  | Red
| 6 | $0.04 | $0.24 | |
 | Technic Bush  | Light Bluish Gray
| 6 | $0.04 | $0.24 | |
 | Tile Round 1 x 1  | Red
| 4 | $0.05 | $0.22 | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Dark Bluish Gray
| 4 | $0.05 | $0.22 | |
 | Brick Sloped 30° 1 x 2 x 2/3  | Red
| 4 | $0.05 | $0.22 | |
 | Brick Curved 4 x 2 No Studs  | Dark Red
| 1 | $0.22 | $0.22 | |
 | Brick Wedged, Curved 2 x 2 with Stud Notches  | Black
| 2 | $0.11 | $0.22 | |
 | Plate 1 x 10  | Tan
| 2 | $0.11 | $0.22 | |
![Image of part Plate Special 1 x 2, Top Clip [Open O]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg) | Plate Special 1 x 2, Top Clip [Open O]  | Black
| 8 | $0.03 | $0.22 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6256803.jpg) | Technic Pin Connector Round 1L [Beam]  | Pearl Gold
| 3 | $0.07 | $0.20 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469446.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version  | Red
| 3 | $0.07 | $0.20 | |
 | Plate 1 x 12  | Tan
| 1 | $0.20 | $0.20 | |
 | Tile 1 x 8 with Groove  | Tan
| 1 | $0.20 | $0.20 | |
 | Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder  | Black
| 1 | $0.20 | $0.20 | |
 | Wedge Plate 2 x 4 27° Left  | Red
| 1 | $0.20 | $0.20 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 5 | $0.04 | $0.20 | |
 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes  | Pearl Gold
| 2 | $0.10 | $0.19 | |
 | Plate 1 x 3  | Medium Azure
| 2 | $0.10 | $0.19 | |
 | Plate 2 x 6  | Yellow
| 2 | $0.10 | $0.19 | |
 | Plate 2 x 2 Corner  | Light Bluish Gray
| 2 | $0.10 | $0.19 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6156991.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Black
| 2 | $0.10 | $0.19 | |
 | Technic Brick 1 x 1 with Pin Hole  | Black
| 2 | $0.10 | $0.19 | |
![Image of part Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/4522034.jpg) | Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | Black
| 2 | $0.10 | $0.19 | |
 | Tile 2 x 2 with Groove  | Dark Red
| 2 | $0.10 | $0.19 | |
 | Wedge Plate 2 x 4 27° Left  | Black
| 1 | $0.18 | $0.18 | |
 | Wedge Plate 2 x 4 27° Right  | Black
| 1 | $0.18 | $0.18 | |
 | Brick Special 1 x 2 with 2 Pins, Square Pin Holes  | Black
| 1 | $0.18 | $0.18 | |
 | Wedge Plate 2 x 4 27° Right  | Red
| 1 | $0.18 | $0.18 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Yellow
| 3 | $0.05 | $0.16 | |
![Image of part Brick Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg) | Brick Curved 2 x 1 No Studs [1/2 Bow]  | Black
| 2 | $0.08 | $0.16 | |
![Image of part Technic Axle Connector with Axle Hole [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6331716.jpg) | Technic Axle Connector with Axle Hole [Reinforced]  | Black
| 2 | $0.08 | $0.16 | |
 | Plate 1 x 4  | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Technic Beam 1 x 2 Thin  | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Plate 1 x 3  | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Plate 2 x 8  | Black
| 1 | $0.16 | $0.16 | |
 | Brick Curved Inverted 2 x 1  | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Tile 1 x 1 with Groove  | Trans-Light Blue
| 2 | $0.08 | $0.16 | |
 | Plate 2 x 3  | Red
| 2 | $0.08 | $0.16 | |
 | Tile 1 x 1 with Groove  | Black
| 2 | $0.08 | $0.16 | |
 | Bracket 1 x 1 - 1 x 1 Inverted  | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | White
| 1 | $0.16 | $0.16 | |
 | Plate 1 x 3  | Lime
| 2 | $0.08 | $0.16 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Black
| 2 | $0.08 | $0.16 | |
 | Plate 2 x 4  | Red
| 2 | $0.08 | $0.16 | |
 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides  | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Brick Wedged, Curved 2 x 1 with Stud Notch Right  | Dark Red
| 1 | $0.16 | $0.16 | |
 | Brick Sloped 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Pearl Gold
| 2 | $0.08 | $0.16 | |
 | Technic Axle 4 with Stop  | Dark Bluish Gray
| 6 | $0.03 | $0.16 | |
 | Plate Round 1 x 1 with Solid Stud  | Pearl Gold
| 6 | $0.03 | $0.16 | |
 | Plate 1 x 2  | Red
| 4 | $0.04 | $0.16 | |
 | Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Dark Bluish Gray
| 4 | $0.04 | $0.16 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Black
| 1 | $0.15 | $0.15 | |
 | Brick Wedged, Curved 2 x 1 with Stud Notch Left  | Dark Red
| 1 | $0.15 | $0.15 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6236454.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Bright Light Orange
| 2 | $0.07 | $0.14 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6207933.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Pearl Gold
| 2 | $0.07 | $0.14 | |
 | Tile 45° Cut 2 x 2 (Triangle)  | Black
| 2 | $0.07 | $0.14 | |
 | Brick Round 1 x 1 Open Stud  | Black
| 2 | $0.07 | $0.14 | |
 | Brick and Axle Separator v2.0  | Orange
| 1 | $0.12 | $0.12 | |
 | Tile Special Round 1 x 1 with Hollow Bar  | Pearl Gold
| 3 | $0.04 | $0.12 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/6279731.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Pearl Gold
| 3 | $0.04 | $0.12 | |
 | Plate 1 x 2  | White
| 2 | $0.05 | $0.11 | |
 | Plate 2 x 2  | Red
| 2 | $0.05 | $0.11 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6271228.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Tan
| 2 | $0.05 | $0.11 | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Red
| 2 | $0.05 | $0.11 | |
 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)  | Black
| 2 | $0.05 | $0.11 | |
 | Brick Sloped 33° 3 x 1  | Red
| 2 | $0.05 | $0.11 | |
 | Bracket 1 x 2 - 2 x 2  | Red
| 2 | $0.05 | $0.11 | |
 | Technic Axle 2 Notched  | Black
| 2 | $0.05 | $0.11 | |
 | Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Red
| 2 | $0.05 | $0.11 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Black
| 2 | $0.05 | $0.11 | |
 | Brick 1 x 1  | Red
| 2 | $0.05 | $0.11 | |
 | Plate Round 1 x 1 with Open Stud  | Dark Red
| 2 | $0.05 | $0.11 | |
 | Plate 2 x 2  | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Brick Sloped 45° 2 x 1 with Bottom Pin  | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Black
| 2 | $0.05 | $0.11 | |
 | Plate 2 x 6  | Red
| 1 | $0.11 | $0.11 | |
 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides  | Black
| 1 | $0.11 | $0.11 | |
![Image of part Brick Sloped Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6425507.jpg) | Brick Sloped Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]  | Black
| 1 | $0.11 | $0.11 | |
 | Plate Round 1 x 1 with Open Stud  | Pearl Gold
| 4 | $0.03 | $0.11 | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced  | Light Bluish Gray
| 4 | $0.03 | $0.11 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529247.jpg) | Cone 1 x 1 [Top Groove]  | Pearl Gold
| 4 | $0.03 | $0.11 | |
 | Tile Special 1 x 2 with Handle  | Red
| 4 | $0.03 | $0.11 | |
 | Brick Curved 2 x 2 x 2/3  | Dark Red
| 1 | $0.10 | $0.10 | |
 | Wedge Plate 4 x 2 Left  | Bright Light Orange
| 1 | $0.10 | $0.10 | |
 | Plate 1 x 6  | Black
| 1 | $0.10 | $0.10 | |
 | Wedge Plate 4 x 2 Right  | Bright Light Orange
| 1 | $0.10 | $0.10 | |
 | Plate Special 4 x 4 with 2 x 2 Opening  | Dark Bluish Gray
| 1 | $0.10 | $0.10 | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Black
| 1 | $0.10 | $0.10 | |
 | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder  | Black
| 1 | $0.08 | $0.08 | |
 | Brick Sloped 30° 1 x 2 x 2/3  | Dark Red
| 1 | $0.08 | $0.08 | |
 | Plate Special 2 x 2 with Only 2 studs  | Black
| 1 | $0.08 | $0.08 | |
 | Brick Curved 2 x 2 with Lip, No Studs  | Black
| 1 | $0.08 | $0.08 | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle  | Black
| 2 | $0.04 | $0.08 | |
 | Technic Axle and Pin Connector Perpendicular  | Black
| 2 | $0.04 | $0.08 | |
 | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)  | Bright Light Orange
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6360036.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Red
| 2 | $0.04 | $0.08 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Tile Round 1 x 1 Quarter  | Black
| 2 | $0.04 | $0.08 | |
 | Technic Beam 2 x 4 L-Shape Thick  | Black
| 2 | $0.04 | $0.08 | |
![Image of part Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6069171.jpg) | Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]  | Bright Light Orange
| 2 | $0.04 | $0.08 | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Trans-Red
| 2 | $0.04 | $0.08 | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 2 | $0.04 | $0.08 | |
 | Plate 1 x 4  | Bright Light Orange
| 2 | $0.04 | $0.08 | |
 | Tile Round 1 x 1 Quarter  | Red
| 2 | $0.04 | $0.08 | |
 | Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder  | Black
| 1 | $0.07 | $0.07 | |
 | Plate 2 x 4  | Dark Red
| 1 | $0.07 | $0.07 | |
 | Brick Special 1 x 2 with Grille  | Black
| 1 | $0.07 | $0.07 | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114328.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | White
| 1 | $0.05 | $0.05 | |
 | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 2 | $0.03 | $0.05 | |
 | Brick Round 1 x 1 Open Stud  | Lime
| 2 | $0.03 | $0.05 | |
 | Technic Pin without Friction Ridges Lengthwise  | Yellow
| 2 | $0.03 | $0.05 | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots  | Black
| 2 | $0.03 | $0.05 | |
 | Technic Axle 2 Notched  | Red
| 2 | $0.03 | $0.05 | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 2 | $0.03 | $0.05 | |
 | Technic Axle 3  | Light Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 1 | $0.04 | $0.04 | |
 | Brick Wedged, Curved 2 x 3 x 2/3 Two Studs, Wing End  | Red
| 1 | $0.04 | $0.04 | |
 | Plate 1 x 2  | Dark Red
| 1 | $0.04 | $0.04 | |
 | Wedge Plate 2 x 4  | Black
| 1 | $0.04 | $0.04 | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 1 | $0.03 | $0.03 | |