 | Tyre 43.2 x 22 ZR   | Black
| 2 | $0.62 | $1.24 | |
 | Technic Beam 1 x 15 Thick | Black
| 2 | $0.58 | $1.16 | |
 | Dish 6 x 6 Inverted (Radar) with Solid Studs | Trans-Orange
| 2 | $0.57 | $1.14 | |
 | Sphere with Opal Trans-Clear Core | Trans-Light Blue
| 2 | $0.57 | $1.14 | |
![Image of part Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]](https://cdn.rebrickable.com/media/parts/elements/6116596.jpg) | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | Pearl Gold
| 7 | $0.12 | $0.85 | |
 | Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | Light Bluish Gray
| 2 | $0.35 | $0.70 | |
 | Brick 1 x 8 | Black
| 2 | $0.34 | $0.68 | |
 | Slope Curved 4 x 2 No Studs | White
| 2 | $0.34 | $0.68 | |
![Image of part Technic Wedge Belt Wheel [aka Pulley]](https://cdn.rebrickable.com/media/parts/elements/6257902.jpg) | Technic Wedge Belt Wheel [aka Pulley] | Pearl Gold
| 2 | $0.30 | $0.59 | |
 | Wave / Lightning with Axle Hole | Trans-Light Blue
| 2 | $0.28 | $0.57 | |
 | Wheel Hard Plastic (37mm D. x 22mm), Pin Hole | Black
| 2 | $0.28 | $0.57 | |
 | Brick Curved, 3 x 1 with 1/3 Inverted Cutout | White
| 2 | $0.28 | $0.57 | |
 | Weapon Gun / Pistol Two Barrel, 10 Ribs | Pearl Gold
| 2 | $0.27 | $0.54 | |
 | Slope Curved 2 x 2 with Stud Notches | Dark Red
| 2 | $0.24 | $0.49 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet | Pearl Gold
| 4 | $0.12 | $0.49 | |
 | Brick Curved, 3 x 1 with 1/3 Inverted Cutout | Medium Azure
| 4 | $0.11 | $0.43 | |
 | Wheel Arch, Mudguard 4 x 2 x 2 1/2 | White
| 1 | $0.41 | $0.41 | |
 | Technic Pin 1/2 with Friction | Dark Bluish Gray
| 5 | $0.08 | $0.41 | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6287672.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | Pearl Gold
| 4 | $0.09 | $0.38 | |
 | Plate 1 x 2 | Trans-Red
| 9 | $0.04 | $0.37 | |
 | Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | White
| 2 | $0.18 | $0.35 | |
 | Wedge Plate 2 x 4 27° Left | Black
| 2 | $0.18 | $0.35 | |
 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | Black
| 2 | $0.18 | $0.35 | |
 | Flag 5 x 6 Hexagonal with U Clips | White
| 1 | $0.35 | $0.35 | |
 | Wedge Plate 2 x 4 27° Right | Black
| 2 | $0.18 | $0.35 | |
 | Plate Special 1 x 1 with Handle on 2 Ends | Black
| 1 | $0.35 | $0.35 | |
 | Wheel 18 x 14 with Pin Hole | Pearl Gold
| 1 | $0.34 | $0.34 | |
 | Plate 1 x 6 | Medium Azure
| 6 | $0.05 | $0.32 | |
![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526981.jpg) | Technic Pin Connector Round [Slotted] | White
| 2 | $0.16 | $0.32 | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6052823.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Medium Azure
| 2 | $0.16 | $0.32 | |
 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | Medium Azure
| 2 | $0.16 | $0.32 | |
 | Wedge Sloped 45° 2 x 2 Corner | White
| 2 | $0.16 | $0.32 | |
![Image of part Game Controller [Plain]](https://cdn.rebrickable.com/media/parts/elements/6275175.jpg) | Game Controller [Plain] | Black
| 1 | $0.30 | $0.30 | |
 | Plate Special 2 x 2 with Sphere Holder | Black
| 2 | $0.15 | $0.30 | |
 | Bracket 1 x 2 - 2 x 2 | Black
| 4 | $0.07 | $0.27 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Black
| 2 | $0.14 | $0.27 | |
 | Plate Round Half 3 x 6 with 1 x 2 Cutout | Dark Bluish Gray
| 2 | $0.14 | $0.27 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs | Light Bluish Gray
| 4 | $0.07 | $0.27 | |
 | Slope Curved 4 x 2 No Studs | Medium Azure
| 1 | $0.24 | $0.24 | |
 | Plate Round 4 x 4 with Pin Hole | Black
| 2 | $0.12 | $0.24 | |
 | Tile 2 x 2 Corner | White
| 2 | $0.12 | $0.24 | |
 | Animal / Creature Body Part, Claw with Clip | Pearl Gold
| 2 | $0.12 | $0.24 | |
 | Spoiler, Plate Special 1 x 2 | Black
| 1 | $0.23 | $0.23 | |
 | Brick 2 x 4 | Dark Bluish Gray
| 1 | $0.23 | $0.23 | |
 | Weapon Lightsaber Hilt with Bottom Ring | Pearl Gold
| 2 | $0.11 | $0.22 | |
 | Slope Curved 2 x 2 with Stud Notches | White
| 2 | $0.11 | $0.22 | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6445843.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Medium Azure
| 2 | $0.11 | $0.22 | |
 | Plate 2 x 2 | Medium Azure
| 5 | $0.04 | $0.20 | |
 | Technic Axle Pin 3L without Friction Ridges and 2L Axle | White
| 2 | $0.09 | $0.19 | |
 | Wedge Plate 2 x 2 Left | Medium Azure
| 2 | $0.09 | $0.19 | |
 | Plate 1 x 3 | Yellow
| 2 | $0.09 | $0.19 | |
 | Turntable 2 x 2 Plate, Base | Black
| 2 | $0.09 | $0.19 | |
 | Plate 2 x 14 | Light Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Plate 4 x 4 | Medium Azure
| 1 | $0.19 | $0.19 | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | Black
| 1 | $0.18 | $0.18 | |
 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | Light Bluish Gray
| 3 | $0.05 | $0.16 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Bluish Gray
| 3 | $0.05 | $0.16 | |
 | Tile Round 1 x 1 | Trans-Orange
| 6 | $0.03 | $0.16 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6271228.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Tan
| 3 | $0.05 | $0.16 | |
 | Slope Curved 2 x 1 with Stud Notch Right | White
| 1 | $0.16 | $0.16 | |
 | Plate 4 x 4 | Black
| 1 | $0.16 | $0.16 | |
 | Slope Curved 2 x 1 with Stud Notch Left | White
| 1 | $0.16 | $0.16 | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top | Tan
| 2 | $0.08 | $0.16 | |
 | Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Wedge Plate 2 x 2 Right | Medium Azure
| 2 | $0.08 | $0.16 | |
 | Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | White
| 2 | $0.08 | $0.16 | |
 | Plate 1 x 4 | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Slope 30° 1 x 2 x 2/3 | Dark Red
| 2 | $0.08 | $0.16 | |
 | Brick 2 x 2 Corner | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Plate Special 2 x 2 with Only 2 studs | Tan
| 2 | $0.08 | $0.16 | |
 | Plate 2 x 2 Corner | Dark Tan
| 4 | $0.04 | $0.16 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Pearl Gold
| 4 | $0.04 | $0.16 | |
 | Technic Pin without Friction Ridges Lengthwise | Yellow
| 5 | $0.03 | $0.14 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Wedge Plate 3 x 2 Left | White
| 1 | $0.14 | $0.14 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Red
| 2 | $0.07 | $0.14 | |
 | Wedge Plate 2 x 2 Cut Corner | Medium Azure
| 2 | $0.07 | $0.14 | |
 | Technic Panel Fairing #21 5L Small Smooth, Side B | White
| 1 | $0.14 | $0.14 | |
 | Technic Panel Fairing #22 5L Small Smooth, Side A | White
| 1 | $0.14 | $0.14 | |
 | Slope Curved 2 x 2 x 2/3 | Black
| 2 | $0.07 | $0.14 | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Medium Azure
| 2 | $0.07 | $0.14 | |
 | Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | Tan
| 1 | $0.12 | $0.12 | |
 | Wedge Sloped 4 x 2 Triple Right | White
| 1 | $0.12 | $0.12 | |
 | Wedge Sloped 4 x 2 Triple Left | White
| 1 | $0.12 | $0.12 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Medium Azure
| 3 | $0.04 | $0.12 | |
 | Wedge Plate 3 x 2 Right | White
| 1 | $0.12 | $0.12 | |
 | Plate 2 x 6 | Light Bluish Gray
| 1 | $0.12 | $0.12 | |
 | Brick Special 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Recessed, Ridges at Underside | Dark Bluish Gray
| 1 | $0.12 | $0.12 | |
 | Tile Round 1 x 1 Quarter | White
| 3 | $0.04 | $0.12 | |
 | Tile Round 1 x 1 Quarter | Dark Bluish Gray
| 3 | $0.04 | $0.12 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | White
| 3 | $0.04 | $0.12 | |
![Image of part Musical Instrument Microphone [Plain]](https://cdn.rebrickable.com/media/parts/elements/6199163.jpg) | Musical Instrument Microphone [Plain] | Light Bluish Gray
| 1 | $0.12 | $0.12 | |
 | Wedge Curved 3 x 4 x 2/3 Cutout | White
| 1 | $0.12 | $0.12 | |
 | Plate Special 1 x 2 with Clip Horizontal on End | White
| 2 | $0.05 | $0.11 | |
 | Plate 1 x 4 | Medium Azure
| 2 | $0.05 | $0.11 | |
 | Technic Beam 2 x 4 L-Shape Thick | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/4621917.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Turntable 2 x 2 Plate - Top | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Technic Axle 2 Notched | Red
| 4 | $0.03 | $0.11 | |
 | Technic Axle Pin with Friction Ridges Lengthwise | Blue
| 4 | $0.03 | $0.11 | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | Black
| 2 | $0.05 | $0.11 | |
 | Wedge Plate 7 x 6 Boat Bow with Stud Notches | Black
| 1 | $0.11 | $0.11 | |
 | Bar 4L (Lightsaber Blade / Wand) | Pearl Gold
| 1 | $0.11 | $0.11 | |
 | Tile 1 x 1 with Groove | Dark Red
| 1 | $0.09 | $0.09 | |
 | Plate Round 1 x 1 with Solid Stud | Pearl Gold
| 3 | $0.03 | $0.08 | |
 | Technic Bush | Red
| 3 | $0.03 | $0.08 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Tan
| 1 | $0.08 | $0.08 | |
 | Plate Special 1 x 2 with Pin Hole on Top | White
| 2 | $0.04 | $0.08 | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Plate 2 x 3 | Red
| 1 | $0.08 | $0.08 | |
 | Wedge Plate 4 Stud 45° Angle Plate | Black
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515364.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends] | White
| 2 | $0.04 | $0.08 | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Plate Round 1 x 1 with Open Stud | Dark Bluish Gray
| 1 | $0.08 | $0.08 | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4114668.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Yellow
| 2 | $0.04 | $0.08 | |
 | Slope 45° 2 x 1 with Bottom Pin | White
| 2 | $0.04 | $0.08 | |
 | Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | Black
| 2 | $0.04 | $0.08 | |
 | Plate 2 x 4 | Light Bluish Gray
| 1 | $0.08 | $0.08 | |
 | Bar 4L (Lightsaber Blade / Wand) | Black
| 1 | $0.08 | $0.08 | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6284379.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Pearl Gold
| 2 | $0.04 | $0.08 | |
 | Brick Arch 1 x 4 | Black
| 1 | $0.07 | $0.07 | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Pearl Gold
| 1 | $0.07 | $0.07 | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | White
| 1 | $0.07 | $0.07 | |
 | Tile 1 x 2 with Groove | Medium Azure
| 1 | $0.05 | $0.05 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Pearl Gold
| 2 | $0.03 | $0.05 | |
 | Technic Axle 4 with Stop | Dark Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Technic Axle Towball | Light Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Brick Arch 1 x 4 | Red
| 1 | $0.05 | $0.05 | |
 | Plate Special 1 x 2 with Door Rail | Dark Tan
| 1 | $0.05 | $0.05 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | Dark Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Bracket 1 x 2 - 2 x 2 | Tan
| 1 | $0.05 | $0.05 | |
 | Plate Special 1 x 4 with Angled Tubes | Flat Silver
| 2 | $0.03 | $0.05 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529247.jpg) | Cone 1 x 1 [Top Groove] | Pearl Gold
| 2 | $0.03 | $0.05 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Medium Nougat
| 1 | $0.04 | $0.04 | |
 | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Slope Curved 2 x 2 x 2/3 | Medium Azure
| 1 | $0.04 | $0.04 | |
 | Plate Special 1 x 2 with Clip Horizontal on Side | Black
| 1 | $0.04 | $0.04 | |
 | Wedge Plate 4 x 6 Cut Corners | Black
| 1 | $0.04 | $0.04 | |
