| Torso Robe with Orange Rope, Dark Bluish Grey Tunic, Gold Asian Symbol print, Pearl Gold Arms and Hands | Pearl Gold
| 1 | | | |
| Wrap with Armor Mask Pearl Titanium Pattern | Pearl Gold
| 1 | | | |
| Windscreen 3 x 6 x 1 Curved with Rectangular Stud Holder in Bottom | Black
| 1 | | | |
| Hips and Pearl Gold Legs with Copper Sash Knee Pads print | Pearl Gold
| 1 | | | |
| Technic Shock Absorber 6.5L with Soft Spring, Standard Coil [Complete Assembly] | Light Bluish Gray
| 1 | | | |
| Plate 1 x 12 | Black
| 7 | | | |
| Plate 1 x 3 | Red
| 20 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Red
| 10 | | | |
| Hair Tousled and Sticking Out on Both Sides | Dark Brown
| 1 | | | |
| Technic Brick 1 x 12 [11 Pin Holes] | Light Bluish Gray
| 2 | | | |
| Minifig Neckwear Shoulder Guard | Pearl Gold
| 1 | | | |
| Hair Tousled and Spiked Up Very High | Dark Brown
| 1 | | | |
| Slope Curved 8 x 2 No Studs | Red
| 4 | | | |
| Technic Brick 1 x 14 [13 Pin Holes] | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Red
| 21 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | White
| 8 | | | |
| Plate Special 1 x 2 with Pin Hole on Top | Red
| 8 | | | |
| Hips and Black Legs | Black
| 1 | | | |
| Torso, Odd Arms and Hands, Robe with Dark Purple Trim, over Robot Panels Print, Left Flat Silver Arm and Dark Purple Hand, Right Black Arm and Hand | Black
| 1 | | | |
| Torso, Odd Arms and Hands, Robe with Dark Purple Trim, over Robot Panels Print, Left Flat Silver Arm and Dark Purple Hand, Right Black Arm and Hand | Black
| 1 | | | |
| Plate 2 x 3 | Red
| 10 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Red
| 4 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Red
| 4 | | | |
| Tyre 37 x 22 ZR | Black
| 4 | | | |
| Technic Beam 3 x 3 L-Shape with Quarter Ellipse Thin | Light Bluish Gray
| 2 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Dark Bluish Gray
| 8 | | | |
| Plate Round 1 x 1 with Solid Stud | Pearl Gold
| 33 | | | |
| Torso Robe, Black Trim, White Asian Symbols 'MASTER' print, Yellow Arms, Black Hands | Blue
| 1 | | | |
| Torso Robe with Black Trim with Asian Characters, Dark Red Undershirt Print (Kai), Yellow Arms, Black Hands | Red
| 1 | | | |
| Technic Brick 1 x 10 [9 Pin Holes] | Black
| 2 | | | |
| Plate 1 x 4 | Dark Bluish Gray
| 9 | | | |
| Plate 1 x 6 | Black
| 7 | | | |
| Slope Curved 4 x 2 No Studs | Red
| 4 | | | |
| Wheel Arch, Mudguard, 1 1/2 x 6 x 1 [Arch Extended] | Red
| 2 | | | |
| Minifig Neckwear Front Harness with 4 Back Studs | Black
| 1 | | | |
| Tile 1 x 3 | Black
| 4 | | | |
| Hips and Blue Legs with Bright Light Blue Sash Belt, Black Robetails, Knee Wraps Print | Blue
| 1 | | | |
| Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | Pearl Gold
| 4 | | | |
| Minifig Head Nindroid, Dark Purple Lines, Red Eye, Gritted Teeth, Silver Armored Right Side / Silver Armored Left Side Print | Black
| 1 | | | |
| Minifig Head Nindroid, Dark Purple Lines, Red Eye, Gritted Teeth, Silver Armored Right Side / Silver Armored Left Side Print | Black
| 1 | | | |
| Sticker Sheet for Set 71737-1 | [No Color/Any Color]
| 1 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Black
| 4 | | | |
| Tile 2 x 4 with Groove | Red
| 3 | | | |
| Technic Brick 1 x 1 with Pin Hole | Black
| 6 | | | |
| Plate 2 x 8 | Red
| 4 | | | |
| Tile Round 2 x 2 with Bottom Stud Holder with 'Ninjago 10 Years' Print | Pearl Gold
| 1 | | | |
| Tile 1 x 4 with Groove | Red
| 4 | | | |
| Plate 1 x 4 | Black
| 7 | | | |
| Plate 2 x 4 | Black
| 7 | | | |
| Hips and Red Legs with Robetails, Dark Red Sash Belt and Knee Wraps Print | Red
| 1 | | | |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | Pearl Gold
| 8 | | | |
| Technic Beam 1 x 4 Thin | Black
| 2 | | | |
| Minifig Head Kai, Reddish Brown Eyebrows, Medium Nougat Scar, Bandage, Lopsided Grin with Teeth / Determined Print | Yellow
| 1 | | | |
| Minifig Head Cole, Bushy Eyebrows, Smile / Angry Print | Yellow
| 1 | | | |
| Minifig Head Jay, Reddish Brown Eyebrows and Freckles, Lopsided Grin / Frown Print | Yellow
| 1 | | | |
| Slope 30° 1 x 2 x 2/3 | Light Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Black
| 6 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Black
| 7 | | | |
| Slope Curved 3 x 2 No Studs | Red
| 1 | | | |
| Plate 2 x 12 | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 10 | Black
| 2 | | | |
| Tile 1 x 8 with Groove | Black
| 2 | | | |
| Plate 6 x 6 | Black
| 1 | | | |
| Plate 4 x 8 | Light Bluish Gray
| 1 | | | |
| Plate 1 x 8 | Red
| 2 | | | |
| Legs Short | Black
| 1 | | | |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | Light Bluish Gray
| 2 | | | |
| Plate 2 x 6 | Red
| 3 | | | |
| Plate 4 x 4 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 10 | Red
| 2 | | | |
| Technic Beam 1 x 3 Thin | Black
| 2 | | | |
| Projectile, Spring Shooter Ammunition 8L Bar | Trans-Orange
| 3 | | | |
| Technic Beam 1 x 3 Thick | Black
| 4 | | | |
| Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | Black
| 1 | | | |
| Brick Special 1 x 2 with Grille | Dark Bluish Gray
| 5 | | | |
| Slope 30° 1 x 2 x 2/3 | Red
| 6 | | | |
| Tile Special 2 x 2 Inverted | Light Bluish Gray
| 1 | | | |
| Plate 2 x 6 | Tan
| 4 | | | |
| Plate 2 x 6 | Black
| 3 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Red
| 2 | | | |
| Tile 1 x 4 with Groove | Black
| 3 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray
| 6 | | | |
| Brick 2 x 4 | Black
| 2 | | | |
| Plate 2 x 4 | Light Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Reddish Brown
| 4 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 16 | | | |
| Weapon Axe Head, Clip-on (Viking) [Thick Clip] | Flat Silver
| 1 | | | |
| Technic Pin Connector Hub with 1 Axle | Red
| 4 | | | |
| Plate 1 x 8 | Yellow
| 2 | | | |
| Technic Axle and Pin Connector Angled #4 - 135° | Black
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 8 | | | |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | Flat Silver
| 3 | | | |
| Wedge Plate 2 x 4 27° Left | Red
| 1 | | | |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | Blue
| 8 | | | |
| Slope Curved 2 x 1 Inverted | Black
| 2 | | | |
| Slope Inverted 45° 2 x 1 | Red
| 4 | | | |
| Wedge Plate 2 x 4 27° Right | Red
| 1 | | | |
| Plate 2 x 3 | Dark Bluish Gray
| 4 | | | |
| Technic Beam 1 x 3 Thin | Yellow
| 2 | | | |
| Technic Beam 3 x 3 T-Shape Thick | Light Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 | Dark Bluish Gray
| 3 | | | |
| Tyre 24 x 14 Shallow Tread (Tread Small Hub), Band Around Center of Tread | Black
| 2 | | | |
| Tile 1 x 1 with Groove | Black
| 3 | | | |
| Plate 2 x 2 | Red
| 4 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Trans-Red
| 1 | | | |
| Technic Axle 4 | Black
| 6 | | | |
| Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | Pearl Gold
| 2 | | | |
| Technic Axle Connector with Axle Hole [Reinforced] | Red
| 2 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Red
| 3 | | | |
| Plate 1 x 6 | Red
| 2 | | | |
| Tile 1 x 2 with Groove | Trans-Yellow
| 3 | | | |
| Weapon Lightsaber Hilt with Bottom Ring | Black
| 3 | | | |
| Technic Beam 1 x 2 Thin | Dark Bluish Gray
| 2 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Black
| 5 | | | |
| Brick 2 x 3 | Orange
| 2 | | | |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | Black
| 4 | | | |
| Bar 3L | Reddish Brown
| 3 | | | |
| Technic Pin Connector Round 1L [Beam] | Black
| 3 | | | |
| Brick 1 x 1 | Black
| 2 | | | |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | Black
| 2 | | | |
| Technic Axle and Pin Connector Angled #2 - 180° | Red
| 2 | | | |
| Technic Brick 1 x 2 [2 Pin Holes] | Black
| 2 | | | |
| Plate 2 x 8 | Dark Bluish Gray
| 1 | | | |
| Bracket 1 x 1 - 1 x 1 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 2 | Light Bluish Gray
| 4 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Dark Purple
| 2 | | | |
| Technic Bush | Red
| 6 | | | |
| Panel 1 x 1 x 1 Corner | Black
| 2 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Black
| 1 | | | |
| Wedge Plate 3 x 2 Left | Black
| 2 | | | |
| Plate Special 2 x 2 with Only 2 studs | Black
| 2 | | | |
| Wedge Plate 3 x 2 Right | Black
| 2 | | | |
| Plate 2 x 2 Corner | Red
| 2 | | | |
| Wedge Plate 2 x 2 Left | Black
| 1 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 2 | | | |
| Slope Curved 4 x 2 No Studs | Black
| 1 | | | |
| Flag 2 x 2 Trapezoid with Flat Area between Clips | Red
| 2 | | | |
| Wedge Plate 2 x 2 Right | Black
| 1 | | | |
| Minifig Neckwear Bandana (Ninjago) | Blue
| 1 | | | |
| Minifig Neckwear Bandana (Ninjago) | Blue
| 1 | | | |
| Brick Special 1 x 2 with 2 Studs on 1 Side | Black
| 1 | | | |
| Tile Special 2 x 3 Pentagonal | Black
| 1 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 1 | Orange
| 3 | | | |
| Technic Axle 7 | Yellow
| 2 | | | |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Light Bluish Gray
| 1 | | | |
| Brick Round 1 x 1 Open Stud | Reddish Brown
| 2 | | | |
| Minifig Neckwear Bandana (Ninjago) | Red
| 1 | | | |
| Minifig Neckwear Bandana (Ninjago) | Red
| 1 | | | |
| Tile 1 x 2 with Groove | Red
| 2 | | | |
| Slope 18° 4 x 1 | Black
| 2 | | | |
| Plate Special 1 x 2 with Door Rail | Light Bluish Gray
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 2 | | | |
| Plate 2 x 2 Corner | White
| 2 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Chain 6L [5 Links] | Pearl Gold
| 1 | | | |
| Bar 1L with Top Stud and Two Side Studs | Pearl Titanium
| 1 | | | |
| Pneumatic Hose Connector with Axle Connector | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 1 | Pearl Gold
| 2 | | | |
| Bracket 1 x 2 - 2 x 2 Inverted | Red
| 2 | | | |
| Wedge Sloped 4 x 2 Triple Right | Black
| 1 | | | |
| Wedge Plate 4 x 2 Left | Black
| 2 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Reddish Brown
| 2 | | | |
| Wedge Plate 4 x 2 Right | Black
| 2 | | | |
| Wedge Sloped 4 x 2 Triple Left | Black
| 1 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Red
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Red
| 1 | | | |
| Plate Special 1 x 2 [Open O Top Clip] | Black
| 4 | | | |
| Plate 2 x 2 | Black
| 2 | | | |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Yellow
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 2 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 3 | | | |
| Wedge Plate 3 x 2 Left | Red
| 1 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 3 | | | |
| Wedge Plate 3 x 2 Right | Red
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Light Bluish Gray
| 2 | | | |
| Tile Round 2 x 2 with Bottom Stud Holder | Dark Bluish Gray
| 1 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black
| 2 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Dark Bluish Gray
| 2 | | | |
| Weapon Sword, Big Blade | Pearl Gold
| 2 | | | |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | Light Bluish Gray
| 2 | | | |
| Wedge Curved 3 x 4 x 2/3 Cutout | Red
| 1 | | | |
| Bar 6L with Stop Ring | Pearl Gold
| 1 | | | |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | Black
| 2 | | | |
| Tile Round 2 x 2 with Bottom Stud Holder | Light Bluish Gray
| 1 | | | |
| Wedge Plate 4 x 2 Left | Red
| 1 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Reddish Brown
| 2 | | | |
| Wedge Plate 4 x 2 Right | Red
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 2 | | | |
| Tile Round 1 x 1 | Trans-Red
| 3 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Light Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 2 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Yellow
| 2 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Light Bluish Gray
| 2 | | | |
| Brick Round 2 x 2 Truncated Cone | Black
| 1 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Trans-Red
| 2 | | | |
| Technic Axle 5 | Light Bluish Gray
| 2 | | | |
| Wedge Plate 2 x 4 | Red
| 1 | | | |
| Plate Round 1 x 1 with Solid Stud | Orange
| 3 | | | |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | Red
| 1 | | | |
| Technic Axle 4 with Stop | Dark Bluish Gray
| 2 | | | |
| Technic Pin 3/4 | Tan
| 2 | | | |
| Arm Mechanical with Clip [Thick Support] | Pearl Gold
| 2 | | | |
| Technic Axle 5.5 with Stop [Rounded Short End] | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 2 | Black
| 1 | | | |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | Black
| 3 | | | |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Black
| 1 | | | |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | Dark Bluish Gray
| 1 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Purple
| 1 | | | |
| Technic Axle Pin with Friction Ridges Lengthwise | Blue
| 2 | | | |
| Tile Special 1 x 1 with Clip with Rounded Edges | Pearl Gold
| 1 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Red
| 1 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Flat Silver
| 1 | | | |
| Technic Axle 3 | Light Bluish Gray
| 1 | | | |
| Technic Axle 2 Notched | Red
| 1 | | | |