 | Launcher Base, Weapon Cannon Base 2 x 4   | Reddish Brown
| 1 | $44.91 | $44.91 | |
 | Panel 4 x 4 x 13 Curved Tapered with Clip at Each End | Dark Orange
| 7 | $1.50 | $10.51 | |
 | Launcher, Weapon Cannon Shooting | Pearl Titanium
| 1 | $2.50 | $2.50 | |
 | Flag 7 x 5 with White Pirate Skull Print | Black
| 1 | $2.38 | $2.38 | |
 | Tile Round 1 x 1 with Ninjago Trapped Jay Print | Trans-Dark Blue
| 2 | $0.77 | $1.54 | |
 | Weapon Sword Hilt with Skull and Bar (Djinn) | White
| 1 | $1.41 | $1.41 | |
 | Weapon Sword / Cutlass Serrated with Skull Hand Guard | Pearl Titanium
| 2 | $0.62 | $1.24 | |
 | Weapon Sword with Jagged Edges and Marbled White Pattern | Trans-Dark Blue
| 2 | $0.50 | $1.00 | |
 | Technic Brick 4 x 6 with 2 x 4 Opening | Black
| 2 | $0.49 | $0.97 | |
 | Weapon Sword / Cutlass Serrated with Skull Hand Guard | White
| 3 | $0.31 | $0.93 | |
 | Minifig Neckwear Epaulette | Dark Green
| 2 | $0.41 | $0.81 | |
![Image of part Weapon Axe Head, Clip-on (Viking) [Thick Clip]](https://cdn.rebrickable.com/media/parts/elements/4613958.jpg) | Weapon Axe Head, Clip-on (Viking) [Thick Clip] | Pearl Titanium
| 2 | $0.41 | $0.81 | |
 | Slope 45° 2 x 2 with Radar and Disk Slot Print | Black
| 1 | $0.80 | $0.80 | |
 | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | Dark Bluish Gray
| 1 | $0.74 | $0.74 | |
 | Slope 45° 2 x 2 with Silver Control Panel and Screen Print | Black
| 1 | $0.70 | $0.70 | |
 | Technic Axle and Pin Connector Angled #6 - 90° | Black
| 3 | $0.20 | $0.61 | |
 | Slope 45° 2 x 1 Double / Inverted with Bottom Stud Holder | White
| 1 | $0.59 | $0.59 | |
 | Ring 4 x 4 with 2 x 2 Opening and 4 Arrow Ends (Ninjago Spinner Crown) | Flat Silver
| 2 | $0.30 | $0.59 | |
 | Weapon Pike / Spear Flat End | Black
| 1 | $0.57 | $0.57 | |
 | Technic Driving Ring Extension, 4 Ridges | Flat Silver
| 2 | $0.28 | $0.57 | |
 | Launcher, Weapon Gun / Blaster / Shooter Mini | White
| 2 | $0.28 | $0.57 | |
 | Bar Holder with Clip | Dark Bluish Gray
| 7 | $0.08 | $0.57 | |
 | Weapon Throwing Star / Shuriken with Textured Grips | Pearl Gold
| 4 | $0.14 | $0.54 | |
 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | Flat Silver
| 3 | $0.18 | $0.53 | |
 | Tile 2 x 4 with Groove | Reddish Brown
| 3 | $0.18 | $0.53 | |
 | Slope Curved 2 x 2 x 2/3 | White
| 3 | $0.16 | $0.49 | |
 | Boat, Anchor - Two Top Holes | Black
| 2 | $0.20 | $0.41 | |
 | Brick Special 1 x 4 with 4 Studs on One Side | Black
| 3 | $0.14 | $0.41 | |
 | Cone 4 x 4 x 2 Hollow No Studs | Dark Bluish Gray
| 2 | $0.20 | $0.41 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6069984.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Reddish Brown
| 4 | $0.09 | $0.38 | |
 | Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | White
| 3 | $0.12 | $0.37 | |
![Image of part Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]](https://cdn.rebrickable.com/media/parts/elements/6116596.jpg) | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | Pearl Gold
| 3 | $0.12 | $0.37 | |
 | Weapon Scythe / Crescent Blade Serrated with Bar | Flat Silver
| 2 | $0.18 | $0.35 | |
 | Plate Round 1 x 1 with Solid Stud | Dark Bluish Gray
| 5 | $0.07 | $0.34 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | Black
| 8 | $0.04 | $0.32 | |
 | Barrel 2 x 2 x 2 | Reddish Brown
| 1 | $0.28 | $0.28 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends] | Black
| 7 | $0.04 | $0.28 | |
 | Plate 1 x 2 | Reddish Brown
| 5 | $0.05 | $0.27 | |
 | Weapon Sword, Big Blade with Bar | Orange
| 2 | $0.14 | $0.27 | |
 | Brick Curved 6 x 1 Inverted | Dark Bluish Gray
| 4 | $0.07 | $0.27 | |
 | Plate 6 x 6 | Reddish Brown
| 1 | $0.26 | $0.26 | |
 | Boat / Ship Wheel / Helm with Slotted Pin | Reddish Brown
| 1 | $0.26 | $0.26 | |
 | Plate 2 x 8 | White
| 1 | $0.24 | $0.24 | |
 | Tile 2 x 4 with Groove | Black
| 1 | $0.24 | $0.24 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Light Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | Black
| 2 | $0.12 | $0.24 | |
 | Tile 1 x 1 with Groove | Orange
| 3 | $0.08 | $0.24 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Black
| 2 | $0.12 | $0.24 | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 8 | $0.03 | $0.22 | |
 | Tile Round 2 x 2 with Hole and Propeller with 3 Blades Print | Dark Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Bracket 1 x 2 - 1 x 2 Inverted | White
| 2 | $0.11 | $0.22 | |
 | Brick 1 x 1 | Black
| 2 | $0.11 | $0.22 | |
 | Tile 1 x 4 with Groove | Orange
| 2 | $0.11 | $0.22 | |
 | Plate 2 x 8 | Light Bluish Gray
| 1 | $0.20 | $0.20 | |
 | Plate Round 1 x 1 with Solid Stud | Trans-Light Blue
| 5 | $0.04 | $0.20 | |
 | Brick 2 x 2 Corner | Black
| 2 | $0.09 | $0.19 | |
![Image of part Pneumatic T-Piece (T Bar) [New Style]](https://cdn.rebrickable.com/media/parts/elements/4211508.jpg) | Pneumatic T-Piece (T Bar) [New Style] | Light Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top | Reddish Brown
| 2 | $0.09 | $0.19 | |
 | Equipment Brush / Broom | Reddish Brown
| 1 | $0.19 | $0.19 | |
 | Technic Axle 9 | Light Bluish Gray
| 1 | $0.18 | $0.18 | |
 | Bucket 1 x 1 x 1 | Reddish Brown
| 1 | $0.18 | $0.18 | |
 | Wedge Plate 6 x 3 Right | Black
| 3 | $0.05 | $0.16 | |
 | Bucket 1 x 1 x 1 Handle | Dark Tan
| 3 | $0.05 | $0.16 | |
 | Plate 1 x 2 | White
| 3 | $0.05 | $0.16 | |
 | Wedge Plate 6 x 3 Left | Black
| 3 | $0.05 | $0.16 | |
 | Plate 4 x 4 | Reddish Brown
| 1 | $0.16 | $0.16 | |
 | Wave / Flame Rounded Large with Marbled Trans-Yellow Pattern | Trans-Red
| 1 | $0.16 | $0.16 | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6347295.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Orange
| 4 | $0.04 | $0.16 | |
 | Technic Axle 4 | Black
| 4 | $0.04 | $0.16 | |
 | Slope 45° 2 x 1 with Bottom Pin | Reddish Brown
| 2 | $0.08 | $0.16 | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598528.jpg) | Plate Special 1 x 2 [Top Clip] | Black
| 4 | $0.04 | $0.16 | |
 | Tile Special 1 x 2 Grille with Bottom Groove | Reddish Brown
| 2 | $0.08 | $0.16 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | White
| 2 | $0.08 | $0.16 | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/4649224.jpg) | Arm Mechanical with Clip [Thick Support] | White
| 4 | $0.04 | $0.16 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | White
| 5 | $0.03 | $0.14 | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6347293.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | White
| 2 | $0.07 | $0.14 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6055069.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Orange
| 2 | $0.07 | $0.14 | |
 | Plate 1 x 3 | Reddish Brown
| 2 | $0.07 | $0.14 | |
 | Brick Arch 1 x 4 | Black
| 2 | $0.07 | $0.14 | |
 | Slope Curved 2 x 2 x 2/3 | Dark Orange
| 2 | $0.07 | $0.14 | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends] | Light Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Brick Round 1 x 1 Open Stud | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Equipment Dynamite Sticks | Red
| 1 | $0.12 | $0.12 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Black
| 3 | $0.04 | $0.12 | |
 | Plate 1 x 1 | Orange
| 3 | $0.04 | $0.12 | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4107742.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Black
| 3 | $0.04 | $0.12 | |
 | Launcher Trigger, Weapon Gun Trigger | Reddish Brown
| 3 | $0.04 | $0.12 | |
 | Slope 45° 2 x 1 with Bottom Pin | Black
| 2 | $0.05 | $0.11 | |
 | Slope 18° 4 x 1 | Black
| 2 | $0.05 | $0.11 | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 4 | $0.03 | $0.11 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Black
| 2 | $0.05 | $0.11 | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends] | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://api.brickonomics.net/assets/no_picture.png) | Plate Special 1 x 2 [Side Handle Closed Ends] | Black
| 2 | $0.05 | $0.11 | |
 | Tile 1 x 2 with Groove | Reddish Brown
| 1 | $0.11 | $0.11 | |
 | Wedge Curved Inverted 10 x 6 x 2 Cockpit | Black
| 1 | $0.11 | $0.11 | |
 | Bar Holder with Clip | Black
| 1 | $0.09 | $0.09 | |
 | Wheel 11 x 8 with Center Groove | Light Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Plate Round 1 x 1 with Solid Stud | Orange
| 3 | $0.03 | $0.08 | |
 | Plate Special 1 x 2 with Clip Horizontal on Side | Light Bluish Gray
| 3 | $0.03 | $0.08 | |
 | Plate Round 1 x 1 with Solid Stud | White
| 3 | $0.03 | $0.08 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Orange
| 3 | $0.03 | $0.08 | |
 | Brick 2 x 2 | Tan
| 1 | $0.08 | $0.08 | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265401.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | White
| 2 | $0.04 | $0.08 | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | White
| 2 | $0.04 | $0.08 | |
 | Plate 2 x 2 Corner | Dark Tan
| 2 | $0.04 | $0.08 | |
 | Plate Special 1 x 1 with Vertical Tooth | White
| 2 | $0.04 | $0.08 | |
 | Technic Axle Connector with Axle Hole | Light Bluish Gray
| 1 | $0.08 | $0.08 | |
 | Plate 2 x 6 | Reddish Brown
| 1 | $0.08 | $0.08 | |
 | Bracket 1 x 2 - 2 x 2 | Black
| 1 | $0.07 | $0.07 | |
 | Wedge Plate 8 x 3, 22° Right | Black
| 1 | $0.07 | $0.07 | |
 | Bracket 1 x 2 - 2 x 2 | White
| 1 | $0.07 | $0.07 | |
 | Slope 30° 1 x 2 x 2/3 | Black
| 1 | $0.07 | $0.07 | |
 | Wedge Plate 8 x 3, 22° Left | Black
| 1 | $0.07 | $0.07 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Orange
| 1 | $0.07 | $0.07 | |
 | Brick Special 2 x 2 with Grooves and Axle Hole | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4593678.jpg) | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | Black
| 1 | $0.05 | $0.05 | |
 | Wedge Plate 4 x 2 Right | Black
| 1 | $0.05 | $0.05 | |
![Image of part Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/4227517.jpg) | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | Dark Bluish Gray
| 1 | $0.05 | $0.05 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529240.jpg) | Cone 1 x 1 [Top Groove] | Dark Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Launcher, Plate Special 1 x 2 with Mini Blaster | Black
| 2 | $0.03 | $0.05 | |
 | Plate 1 x 2 | Orange
| 2 | $0.03 | $0.05 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | White
| 2 | $0.03 | $0.05 | |
 | Wedge Plate 4 x 2 Left | Black
| 1 | $0.05 | $0.05 | |
 | Technic Axle 2 Notched | Red
| 2 | $0.03 | $0.05 | |
 | Plate Round 4 x 4 with Pin Hole | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529242.jpg) | Cone 1 x 1 [Top Groove] | Reddish Brown
| 1 | $0.04 | $0.04 | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4516546.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation] | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Wedge Plate 2 x 4 | White
| 1 | $0.04 | $0.04 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Black
| 1 | $0.04 | $0.04 | |
 | Handlebars | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Plate 1 x 2 | Trans-Red
| 1 | $0.04 | $0.04 | |
 | Plate Special 1 x 2 with Handles on Ends | Black
| 1 | $0.04 | $0.04 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | White
| 1 | $0.04 | $0.04 | |
![Image of part Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]](https://cdn.rebrickable.com/media/parts/elements/4144024.jpg) | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | Black
| 1 | $0.04 | $0.04 | |
 | Technic Axle 3 with Stud | Dark Tan
| 1 | $0.04 | $0.04 | |
 | Wedge Plate 4 x 6 Cut Corners | Black
| 1 | $0.04 | $0.04 | |
 | Plate 2 x 2 | Reddish Brown
| 1 | $0.04 | $0.04 | |
 | Launcher Trigger, Weapon Gun Trigger | Dark Bluish Gray
| 3 | $0.01 | $0.04 | |
