 | Technic Axle Connector Hub with 4 Bars at 90°  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 11 | | | |
![Image of part Minifig Head Dr Octopus (Doc Ock), Dual Sided, Red Sunglasses / Red Lenses Flapped Up Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6003622.jpg) | Minifig Head Dr Octopus (Doc Ock), Dual Sided, Red Sunglasses / Red Lenses Flapped Up Print [Hollow Stud]  | Light Nougat
| 1 | | | |
 | String with End Studs and Minifig Grips 21L  | White
| 1 | | | |
 | Minifig Neckwear Bracket with Technic Pin  | Black
| 1 | | | |
 | Flexible Ribbed Hose 8mm Ends 19L  | Flat Silver
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Light Blue
| 22 | | | |
 | Tyre 24 x 14 Shallow Tread (Tread Small Hub)  | Black
| 4 | | | |
 | Panel 1 x 6 x 5  | Light Bluish Gray
| 1 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289542.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]  | Dark Bluish Gray
| 4 | | | |
![Image of part Minifig Head Iron Fist, White Pointed Eyes, Light Nougat Face, Smirk Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6003623.jpg) | Minifig Head Iron Fist, White Pointed Eyes, Light Nougat Face, Smirk Print [Blocked Open Stud]  | Yellow
| 1 | | | |
 | Hips and Light Bluish Gray Legs  | Black
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Cross  | Black
| 1 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole, 9 Teeth  | Black
| 8 | | | |
 | Hips and Green Legs  | Green
| 1 | | | |
 | Hips and Blue Legs  | Blue
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Medium Blue
| 9 | | | |
 | Hair Mid-Length Tousled with Center Part  | Black
| 1 | | | |
![Image of part Arm Mechanical with 2 Clips [Battle Droid]](https://cdn.rebrickable.com/media/parts/elements/4223247.jpg) | Arm Mechanical with 2 Clips [Battle Droid]  | Black
| 5 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Black
| 6 | | | |
 | Brick 1 x 4  | Medium Blue
| 3 | | | |
 | Brick Special 1 x 2 with Grille  | Black
| 7 | | | |
 | Slope 33° 3 x 2  | Black
| 5 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | White
| 4 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Light Bluish Gray
| 4 | | | |
 | Brick 1 x 1  | Black
| 4 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | Light Bluish Gray
| 4 | | | |
 | Slope 30° 1 x 2 x 2/3  | Dark Bluish Gray
| 4 | | | |
 | Brick Arch 1 x 6 x 2 Curved Top  | Black
| 2 | | | |
 | Brick 1 x 10  | Black
| 1 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://cdn.rebrickable.com/media/parts/elements/4196768.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]  | Dark Bluish Gray
| 2 | | | |
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4186513.jpg) | Dish 3 x 3 Inverted [Radar]  | Trans-Clear
| 1 | | | |
![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4638658.jpg) | Panel 1 x 2 x 2 [Side Supports / Hollow Studs]  | Trans-Brown
| 2 | | | |
 | Technic Axle and Pin Connector Angled #1  | Black
| 5 | | | |
 | Wedge 2 x 2 Facet  | Black
| 6 | | | |
![Image of part Hinge Brick 1 x 4 [Upper]](https://cdn.rebrickable.com/media/parts/elements/383026.jpg) | Hinge Brick 1 x 4 [Upper]  | Black
| 4 | | | |
![Image of part Hinge Brick 1 x 4 [Lower]](https://cdn.rebrickable.com/media/parts/elements/383126.jpg) | Hinge Brick 1 x 4 [Lower]  | Black
| 4 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove (Jumper)  | Black
| 2 | | | |
![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585429.jpg) | Panel 1 x 2 x 3 [Side Supports / Hollow Studs]  | Light Bluish Gray
| 4 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Black
| 6 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370126.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Black
| 2 | | | |
 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes  | White
| 4 | | | |
 | Brick 2 x 3  | Light Bluish Gray
| 2 | | | |
 | Plate 1 x 4  | Black
| 4 | | | |
 | Wheel Arch, Mudguard 4 x 2 1/2 x 2 with 2 x 2 Plate  | Black
| 1 | | | |
 | Hose, Ribbed 7mm D. 2L / 1.6cm  | Flat Silver
| 3 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4567339.jpg) | Cone 1 x 1 [Top Groove]  | Trans-Brown
| 4 | | | |
 | Brick Arch 1 x 6 Raised Arch  | Dark Bluish Gray
| 5 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Light Bluish Gray
| 2 | | | |
 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar  | Light Bluish Gray
| 1 | | | |
 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes  | Black
| 1 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 2 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth  | Dark Bluish Gray
| 4 | | | |
 | Slope 30° 1 x 2 x 2/3  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 4 with Groove  | Black
| 2 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Black
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 5 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289542.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]  | Dark Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211111.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Dark Bluish Gray
| 4 | | | |
 | Wedge Plate 4 x 6 Cut Corners  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 2 with Groove  | Trans-Red
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Lime
| 9 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Black
| 2 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 2 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Bright Green
| 3 | | | |
 | Brick 2 x 2  | Black
| 2 | | | |
 | Plate 1 x 2  | White
| 3 | | | |
 | Plate 2 x 8  | Black
| 1 | | | |
 | Wedge Curved 4 x 4 No Top Studs  | Black
| 1 | | | |
 | Wing, Tail 4 x 1 x 3  | Black
| 2 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366026.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Black
| 1 | | | |
 | Plate 2 x 4  | Light Bluish Gray
| 2 | | | |
 | Plate 1 x 2  | Medium Blue
| 2 | | | |
 | Slope 18° 4 x 1  | Black
| 2 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Black
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 3 | | | |
 | Jet Engine Fan with 10 Blades and Technic Pin  | Black
| 1 | | | |
 | Plate Special 2 x 4 with Pins  | Light Bluish Gray
| 2 | | | |
 | Technic Pin 1/2  | Light Bluish Gray
| 3 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4500469.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | White
| 1 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4210762.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 5 | | | |
![Image of part Panel 1 x 2 x 1 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/3001042.jpg) | Panel 1 x 2 x 1 [Square Corners]  | Trans-Light Blue
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 5 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/15/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | White
| 2 | | | |
 | Technic Axle 6  | Black
| 1 | | | |
 | Brick Special 1 x 2 with 2 Pins, Round Pin Holes  | Dark Bluish Gray
| 2 | | | |
 | Turntable 4 x 4 Square Base, Locking  | Black
| 2 | | | |
 | Brick 1 x 2 without Bottom Tube  | Trans-Red
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Black
| 2 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 2 | | | |
 | Plate 1 x 4  | Medium Blue
| 1 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211541.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Light Bluish Gray
| 1 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146220.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | Black
| 1 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Black
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Dark Bluish Gray
| 1 | | | |
 | Slope Inverted 45° 4 x 4 Double with 2 Holes  | Black
| 1 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Bluish Gray
| 1 | | | |