 | Slope 33° 2 x 2 Double / Inverted  | Black
| 4 | $0.61 | $2.43 | |
 | Bar Holder with Clip  | Light Bluish Gray
| 6 | $0.31 | $1.87 | |
 | Plate 1 x 2  | Sand Blue
| 9 | $0.12 | $1.10 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Black
| 8 | $0.14 | $1.08 | |
 | Plate Round 1 x 1 with Open Stud  | Dark Bluish Gray
| 13 | $0.08 | $1.05 | |
 | Bracket 1 x 2 - 1 x 2  | Reddish Brown
| 2 | $0.45 | $0.89 | |
 | Weapon Lightsaber Blade 8L with Axle  | Trans-Red
| 1 | $0.88 | $0.88 | |
 | Plate Special 1 x 1 with Tooth  | Light Bluish Gray
| 4 | $0.22 | $0.87 | |
 | Plate 1 x 5  | Black
| 4 | $0.20 | $0.81 | |
 | Plate 1 x 5  | Black
| 4 | $0.20 | $0.81 | |
 | Tile 2 x 2 with Red/Green Buttons, Control Panel print  | Black
| 1 | $0.73 | $0.73 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469445.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version  | Black
| 8 | $0.08 | $0.65 | |
 | Tile 2 x 2 with Light Bluish Grey Empire Logo print  | White
| 1 | $0.64 | $0.64 | |
 | Tile Round 2 x 4  | White
| 4 | $0.15 | $0.59 | |
 | Brick Round, Half 1 x 2  | White
| 4 | $0.15 | $0.59 | |
 | Bar Holder with Clip  | Black
| 6 | $0.09 | $0.57 | |
 | Bar Holder with Clip  | Black
| 6 | $0.09 | $0.57 | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Black
| 7 | $0.08 | $0.57 | |
 | Brick Round 2 x 2, Pin Holes  | White
| 4 | $0.14 | $0.54 | |
 | Plate 1 x 3  | Black
| 4 | $0.14 | $0.54 | |
 | Plate 2 x 2 Corner  | Sand Green
| 4 | $0.12 | $0.49 | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | White
| 4 | $0.12 | $0.49 | |
 | Tile Round 1 x 1 Half Circle  | Dark Red
| 2 | $0.23 | $0.46 | |
 | Plate 1 x 2  | Dark Red
| 11 | $0.04 | $0.45 | |
 | Plate 2 x 2  | Black
| 8 | $0.05 | $0.43 | |
 | Plate Special, 2 x 2 Studs and Handle, Closed Ends (Mech Chest Plate / Armor)  | White
| 1 | $0.42 | $0.42 | |
 | Plate Special 1 x 4 Rounded with 2 Open Studs  | Light Bluish Gray
| 2 | $0.20 | $0.41 | |
 | Plate Angled 2 x 2 with Step and Hole in Center  | Dark Bluish Gray
| 4 | $0.09 | $0.38 | |
 | Plate Angled 2 x 2 with Step and Hole in Center  | White
| 4 | $0.09 | $0.38 | |
 | Plate Angled 2 x 2 with Step and Hole in Center  | Dark Bluish Gray
| 4 | $0.09 | $0.38 | |
 | Cone 1 1/2 x 1 1/2 x 2/3  | Light Bluish Gray
| 2 | $0.19 | $0.38 | |
 | Brick Curved 2 x 2 x 1 1/3 Curved Top, Corner  | Bright Light Orange
| 2 | $0.19 | $0.38 | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Metallic Silver
| 2 | $0.19 | $0.38 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | White
| 2 | $0.18 | $0.35 | |
 | Weapon Gun / Blaster Short (Star Wars)  | Black
| 1 | $0.34 | $0.34 | |
 | Brick Round 2 x 2 Truncated Cone  | White
| 4 | $0.08 | $0.32 | |
 | Headwear Accessory Rangefinder for Helmet, with Holes (Star Wars Clone Trooper)  | Dark Bluish Gray
| 3 | $0.09 | $0.28 | |
 | Plate 1 x 2  | Reddish Brown
| 5 | $0.05 | $0.27 | |
 | Plate Round 1 x 1 with Open Stud  | Light Bluish Gray
| 5 | $0.05 | $0.27 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469463.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version  | Dark Bluish Gray
| 2 | $0.14 | $0.27 | |
 | Brick Round 2 x 2, Pin Holes  | Bright Light Orange
| 2 | $0.14 | $0.27 | |
 | Headwear Accessory Visor (Star Wars Clone Trooper)  | Dark Bluish Gray
| 4 | $0.07 | $0.27 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Black
| 2 | $0.14 | $0.27 | |
![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version](https://cdn.rebrickable.com/media/parts/elements/6469441.jpg) | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version  | White
| 4 | $0.07 | $0.27 | |
 | Plate Special 1 x 2 with Pin Hole On Side  | Light Bluish Gray
| 1 | $0.26 | $0.26 | |
 | Plate Special 1 x 2 with Pin Hole On Side  | Light Bluish Gray
| 1 | $0.26 | $0.26 | |
 | Plate Special 1 x 2 with Pin Hole On Side  | Light Bluish Gray
| 1 | $0.26 | $0.26 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 9 | $0.03 | $0.24 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Bright Light Orange
| 1 | $0.24 | $0.24 | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 6 | $0.04 | $0.24 | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball  | Dark Bluish Gray
| 6 | $0.04 | $0.24 | |
 | Slope 30° 1 x 2 x 2/3  | Light Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Sand Green
| 2 | $0.12 | $0.24 | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball  | Dark Bluish Gray
| 6 | $0.04 | $0.24 | |
 | Slope Curved 2 x 1 Inverted  | Black
| 2 | $0.12 | $0.24 | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 6 | $0.04 | $0.24 | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6093859.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Light Bluish Gray
| 2 | $0.12 | $0.24 | |
 | Slope Curved 2 x 1 Inverted  | Black
| 2 | $0.12 | $0.24 | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball  | Dark Bluish Gray
| 6 | $0.04 | $0.24 | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 6 | $0.04 | $0.24 | |
 | Brick Round 1 x 1 Open Stud  | Dark Blue
| 4 | $0.05 | $0.22 | |
 | Plate Round 1 x 1 with Open Stud  | Black
| 4 | $0.05 | $0.22 | |
 | Plate 2 x 2  | Dark Bluish Gray
| 4 | $0.05 | $0.22 | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6325717.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]  | Reddish Brown
| 2 | $0.11 | $0.22 | |
 | Bracket 1 x 2 - 2 x 2  | Dark Blue
| 1 | $0.22 | $0.22 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Slope Curved 2 x 2 with Stud Notches  | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Dark Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Slope Curved 2 x 2 x 2/3  | Sand Blue
| 2 | $0.11 | $0.22 | |
 | Wedge Plate 2 x 2 Cut Corner  | Black
| 2 | $0.11 | $0.22 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | White
| 2 | $0.11 | $0.22 | |
 | Plate 2 x 3  | White
| 2 | $0.11 | $0.22 | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Red
| 1 | $0.22 | $0.22 | |
 | Brick 1 x 1  | Black
| 2 | $0.11 | $0.22 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Dark Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Dark Green
| 1 | $0.20 | $0.20 | |
 | Slope Curved 2 x 2 x 2/3  | Dark Red
| 2 | $0.09 | $0.19 | |
 | Tile Round 2 x 2 with Hole  | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Plate 2 x 4  | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | White
| 2 | $0.09 | $0.19 | |
 | Plate Special 4 x 7 with 3 Slopes, Wedges, 3 Axle Holes  | Light Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Bracket 1 x 1 - 1 x 1  | Black
| 1 | $0.19 | $0.19 | |
 | Plate Special 4 x 7 with 3 Slopes, Wedges, 3 Axle Holes  | Light Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Plate Special 4 x 7 with 3 Slopes, Wedges, 3 Axle Holes  | Light Bluish Gray
| 1 | $0.19 | $0.19 | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider  | Black
| 1 | $0.18 | $0.18 | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider  | Black
| 1 | $0.18 | $0.18 | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider  | Black
| 1 | $0.18 | $0.18 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Green
| 3 | $0.05 | $0.16 | |
 | Plate 2 x 2  | Black
| 3 | $0.05 | $0.16 | |
 | Tile 2 x 2 with Light Bluish Grey Armor print  | Dark Green
| 1 | $0.16 | $0.16 | |
 | Plate Special, 2 x 2 Studs and Handle, Closed Ends (Mech Chest Plate / Armor)  | Dark Green
| 1 | $0.16 | $0.16 | |
 | Brick Special 1 x 2 with Grille  | Sand Blue
| 2 | $0.08 | $0.16 | |
 | Plate 1 x 3  | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Plate Round 1 x 1 with Open Stud  | Reddish Brown
| 4 | $0.04 | $0.16 | |
 | Slope Curved 2 x 1 Inverted  | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Plate 2 x 3  | Black
| 2 | $0.08 | $0.16 | |
 | Bracket 1 x 2 - 1 x 2  | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 4 | $0.04 | $0.16 | |
 | Bracket 1 x 2 - 1 x 2  | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Weapon Gun / Pistol Two Barrel, 10 Ribs  | Black
| 1 | $0.15 | $0.15 | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Black
| 2 | $0.07 | $0.14 | |
 | Slope Curved 4 x 1 Double with No Studs  | Reddish Brown
| 1 | $0.14 | $0.14 | |
 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs  | Light Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Plate Special, 2 x 2 Studs and Handle, Closed Ends (Mech Chest Plate / Armor)  | Black
| 1 | $0.14 | $0.14 | |
 | Slope Curved 2 x 2 with Lip, No Studs  | Black
| 2 | $0.07 | $0.14 | |
 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End  | Black
| 2 | $0.07 | $0.14 | |
 | Tile Round 1 x 1  | White
| 3 | $0.04 | $0.12 | |
 | Minifig Neckwear Collar SW Darth Vader Helmet Bottom  | Black
| 1 | $0.12 | $0.12 | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/4621917.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6121485.jpg) | Technic Pin Connector Round 1L [Beam]  | Black
| 2 | $0.05 | $0.11 | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6257593.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole  | Black
| 2 | $0.05 | $0.11 | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 4 | $0.03 | $0.11 | |
 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate  | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | White
| 2 | $0.05 | $0.11 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6121485.jpg) | Technic Pin Connector Round 1L [Beam]  | Black
| 2 | $0.05 | $0.11 | |
 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole  | Black
| 2 | $0.05 | $0.11 | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 4 | $0.03 | $0.11 | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6161155.jpg) | Technic Pin Connector Round 1L [Beam]  | Flat Silver
| 2 | $0.05 | $0.11 | |
 | Slope Inverted 45° 2 x 1  | Black
| 2 | $0.05 | $0.11 | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/4621917.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Dark Bluish Gray
| 2 | $0.05 | $0.11 | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6254045.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | Black
| 2 | $0.05 | $0.11 | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474026.jpg) | Dish 2 x 2 Inverted [Radar]  | Black
| 2 | $0.05 | $0.11 | |
 | Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone)  | Light Bluish Gray
| 1 | $0.11 | $0.11 | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6287673.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]  | Flat Silver
| 1 | $0.11 | $0.11 | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3  | Black
| 1 | $0.09 | $0.09 | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Reddish Brown
| 1 | $0.09 | $0.09 | |
 | Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone)  | Black
| 1 | $0.09 | $0.09 | |
 | Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone)  | Black
| 1 | $0.09 | $0.09 | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Light Bluish Gray
| 1 | $0.09 | $0.09 | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3  | Black
| 1 | $0.09 | $0.09 | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots  | Black
| 3 | $0.03 | $0.08 | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 3 | $0.03 | $0.08 | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots  | Black
| 3 | $0.03 | $0.08 | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6093459.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Bright Light Orange
| 2 | $0.04 | $0.08 | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Brick 1 x 2  | Dark Green
| 1 | $0.08 | $0.08 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Reddish Brown
| 1 | $0.08 | $0.08 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Bright Light Orange
| 2 | $0.04 | $0.08 | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4211632.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6249091.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | White
| 2 | $0.04 | $0.08 | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Bluish Gray
| 2 | $0.04 | $0.08 | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Black
| 2 | $0.04 | $0.08 | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Black
| 2 | $0.04 | $0.08 | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End  | Black
| 2 | $0.04 | $0.08 | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Plate 1 x 4  | Black
| 1 | $0.07 | $0.07 | |
 | Plate 1 x 4  | Black
| 1 | $0.07 | $0.07 | |
 | Plate 1 x 2  | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
 | Launcher, Plate Special 1 x 2 with Mini Blaster Square  | Pearl Titanium
| 1 | $0.05 | $0.05 | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Red
| 1 | $0.05 | $0.05 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529238.jpg) | Cone 1 x 1 [Top Groove]  | Dark Red
| 1 | $0.05 | $0.05 | |
 | Launcher Trigger, Weapon Gun Trigger  | Dark Bluish Gray
| 2 | $0.03 | $0.05 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6099728.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Bright Light Orange
| 1 | $0.05 | $0.05 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Black
| 1 | $0.05 | $0.05 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Black
| 1 | $0.05 | $0.05 | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6321349.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]  | White
| 2 | $0.03 | $0.05 | |
 | Launcher, Plate Special 1 x 2 with Mini Blaster Square  | Pearl Titanium
| 1 | $0.05 | $0.05 | |
 | Launcher Trigger, Weapon Gun Trigger  | Dark Bluish Gray
| 2 | $0.03 | $0.05 | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Light Bluish Gray
| 2 | $0.03 | $0.05 | |
![Image of part Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/6092952.jpg) | Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]  | Black
| 1 | $0.05 | $0.05 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom  | Black
| 1 | $0.04 | $0.04 | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6321745.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]  | Black
| 1 | $0.04 | $0.04 | |
 | Plate Special 2 x 2 with 2 Pin Holes  | Light Bluish Gray
| 1 | $0.04 | $0.04 | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6321745.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]  | Black
| 1 | $0.04 | $0.04 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom  | Black
| 1 | $0.04 | $0.04 | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Dark Red
| 1 | $0.04 | $0.04 | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278274.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Dark Bluish Gray
| 1 | $0.04 | $0.04 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom  | Black
| 1 | $0.04 | $0.04 | |
 | Technic Axle 2 Notched  | Red
| 1 | $0.03 | $0.03 | |
 | Technic Axle 2 Notched  | Red
| 1 | $0.03 | $0.03 | |