| Wrap with Flames Trans-Red Pattern | Bright Light Orange
| 1 | | | |
| Wrap with Flames Trans-Yellow Pattern | Medium Blue
| 1 | | | |
| Hips and Pearl Gold Legs with Dark Green Sash, Knee Pads | Pearl Gold
| 1 | | | |
| Torso Robe, 2 Gold Dragons, Black Trim V-Neck, Dark Green Straps Print, Pearl Gold Arms and Hands | Pearl Gold
| 1 | | | |
| Wrap with Long Back Knot, Dark Green Band Pattern | Pearl Gold
| 1 | | | |
| Torso Gold Ribs, Belt, Purple/Pink Chest print, Black Arms, Dark Purple Hands | Black
| 1 | | | |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | Dark Purple
| 22 | | | |
| Lower Body, Ghost Marbled Black | Trans-Purple
| 1 | | | |
| Brick Round Cone Spinner with Marbled Trans-Yellow Pattern | Medium Blue
| 1 | | | |
| Torso Robe, Yellow Flames, Star print, Bright Light Orange Arms, Dark Red Hands | Red
| 1 | | | |
| Minifig Neckwear Armor with Dual Layer Shoulder Pads | Pearl Gold
| 1 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Dark Blue
| 10 | | | |
| Helmet Castle with Cheek Protection Angled | Black
| 1 | | | |
| Brick Round Cone Spinner with Marbled Trans-Orange Pattern | Red
| 1 | | | |
| Torso Robes, Medium Yellow Lightning, White Asian Symbol print, Blue Arms, Dark Blue Hands | Blue
| 1 | | | |
| Plate 1 x 2 | Dark Purple
| 15 | | | |
| Wave / Lightning Angular, Double | Trans-Dark Pink
| 1 | | | |
| Propeller 1 Blade 2 x 16 with Axle | Dark Purple
| 8 | | | |
| Hips and Sand Blue Legs with Blue Robe, Bright Light Yellow Belt, Medium Azure Knee Wraps print | Sand Blue
| 1 | | | |
| Tile Special 2 x 2 Inverted | Black
| 4 | | | |
| Dome for Ninjago Spinner | Trans-Clear
| 1 | | | |
| Dome for Ninjago Spinner | Trans-Clear
| 1 | | | |
| Wedge Sloped 45° 2 x 2 Corner | Black
| 2 | | | |
| Minifig Neckwear Shoulder Guard | Pearl Gold
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Dark Blue
| 8 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Dark Blue
| 12 | | | |
| Technic Ball Joint with Through Axle Hole | Black
| 3 | | | |
| Slope Curved 3 x 1 No Studs | Dark Blue
| 6 | | | |
| Hips and Medium Nougat Legs with Red Robe, Yellow Flames, Dark Red, Knee Wraps print | Medium Nougat
| 1 | | | |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | Black
| 5 | | | |
| Technic Axle Connector Hub with 3 Axles at 120° | Light Bluish Gray
| 2 | | | |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | Dark Blue
| 4 | | | |
| Weapon Throwing Star / Shuriken with Textured Grips | Pearl Gold
| 4 | | | |
| Weapon Throwing Star / Shuriken with Textured Grips | Pearl Gold
| 4 | | | |
| Creature Body Part, Dragon Head Upper Jaw with 4 Studs on Top and Gold Teeth | Black
| 1 | | | |
| Plate Round 6 x 6 with Hole | Tan
| 1 | | | |
| Creature Body Part, Dragon Head Upper Jaw with 4 Studs on Top and Gold Teeth, Dark Purple/Pink Eye print | Black
| 1 | | | |
| Weapon Spear Tip with Fins | Dark Bluish Gray
| 3 | | | |
| Wedge Plate 3 x 2 Right | Dark Blue
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Purple
| 11 | | | |
| Arm Mechanical with Clip [Thick Support] | Dark Bluish Gray
| 6 | | | |
| Wedge Plate 3 x 2 Left | Dark Blue
| 2 | | | |
| Bracket 1 x 1 - 1 x 1 | Black
| 2 | | | |
| Minifig Head Lloyd, Reddish Brown Eyebrows, Green Eyes, Lopsided Open Mouth Grin / Gritted Teeth Print | Yellow
| 1 | | | |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | Black
| 2 | | | |
| Hinge Plate 2 x 4 with Articulated Joint - Female | Dark Blue
| 2 | | | |
| Plate Special 1 x 1 with Tooth | Black
| 6 | | | |
| Bracket 1 x 2 - 1 x 2 | Black
| 4 | | | |
| Plate Round 4 x 4 with Pin Hole | Blue
| 2 | | | |
| Dish 4 x 4 with 4 Studs | Black
| 1 | | | |
| Dish 4 x 4 with 4 Studs | Black
| 1 | | | |
| Plate Special 1 x 1 Rounded with Handle | Pearl Gold
| 8 | | | |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside | Trans-Clear
| 2 | | | |
| Technic Brick Special 2 x 2 with 10.2mm Balls with Holes and Axle Hole | Black
| 1 | | | |
| Plate 2 x 2 Corner | Red
| 4 | | | |
| Brick Special 2 x 4 with Spinner Holder | Dark Bluish Gray
| 1 | | | |
| Brick Special 2 x 4 with Spinner Holder | Dark Bluish Gray
| 1 | | | |
| Arm Mechanical with 2 Clips [Battle Droid] | Black
| 3 | | | |
| Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | Black
| 5 | | | |
| Bar Holder with Clip | Dark Bluish Gray
| 4 | | | |
| Wave / Lightning Angular, Single | Trans-Dark Pink
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Black
| 3 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Blue
| 3 | | | |
| Plate 2 x 2 Corner | Dark Bluish Gray
| 4 | | | |
| Brick Special 1 x 2 with 2 Studs on 1 Side | Black
| 2 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Blue
| 7 | | | |
| Plate 2 x 6 | Dark Bluish Gray
| 3 | | | |
| Slope Curved 2 x 1 Inverted | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Black
| 8 | | | |
| Bar Holder with Clip | Pearl Gold
| 4 | | | |
| Brick 1 x 2 | Dark Bluish Gray
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Dark Bluish Gray
| 6 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Dark Bluish Gray
| 4 | | | |
| Tile Round 2 x 2 with Orange Spiral print | Pearl Gold
| 1 | | | |
| Tile Round 2 x 2 with Orange Spiral print | Pearl Gold
| 1 | | | |
| Plate Special 1 x 2 [Open O Top Clip] | Black
| 10 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Black
| 3 | | | |
| Technic Axle 2 Notched | Black
| 4 | | | |
| Bar Holder with Hole and Bar Handle | Black
| 2 | | | |
| Mudguard 2 x 4 with Molded Headlights | Dark Blue
| 3 | | | |
| Tile Special 2 x 3 Pentagonal | Dark Blue
| 2 | | | |
| Technic Axle Connector with Axle Hole [Reinforced] | Dark Bluish Gray
| 2 | | | |
| Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | Black
| 1 | | | |
| Tile 1 x 4 with Groove | Black
| 2 | | | |
| Arm Mechanical with Clip [Thick Support] | Black
| 4 | | | |
| Dish 3 x 3 Inverted [Radar] | Light Bluish Gray
| 1 | | | |
| Wedge Sloped 45° 6 x 4 Double / 33° [Train Roof] | Black
| 1 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Dark Bluish Gray
| 2 | | | |
| Brick Special 1 x 2 with 2 Studs on 1 Side | Red
| 2 | | | |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | Dark Bluish Gray
| 4 | | | |
| Slope 30° 1 x 2 x 2/3 | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 2 | Dark Bluish Gray
| 3 | | | |
| Tile 1 x 2 with Groove | Black
| 2 | | | |
| Brick 2 x 2 | Black
| 2 | | | |
| Brick Round 2 x 2 with Pin Holes | Light Bluish Gray
| 1 | | | |
| Brick Round 2 x 2 with Axle Hole | Red
| 3 | | | |
| Axle for Spinner | Black
| 1 | | | |
| Axle for Spinner | Black
| 1 | | | |
| Wedge Curved 4 x 4 No Top Studs | Dark Blue
| 2 | | | |
| Technic Beam 1 x 2 with Ball Joint Angled | Dark Bluish Gray
| 2 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Black
| 2 | | | |
| Plate Round 1 x 1 with Open Stud | Pearl Gold
| 5 | | | |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | Black
| 2 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Dark Bluish Gray
| 4 | | | |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | Pearl Gold
| 5 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Tan
| 3 | | | |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | Black
| 4 | | | |
| Plate 2 x 4 | Black
| 2 | | | |
| Tile Round 2 x 2 with Hole | Black
| 1 | | | |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | Black
| 3 | | | |
| Hinge Plate 2 x 4 with Articulated Joint - Male | Dark Bluish Gray
| 2 | | | |
| Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 7 Teeth | Light Bluish Gray
| 2 | | | |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | Dark Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 Quarter | Dark Purple
| 3 | | | |
| Tile Round 1 x 1 Quarter | Dark Blue
| 3 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 4 | | | |
| Plate Special 1 x 2 with Angled Handles on Side | Black
| 2 | | | |
| Plate Round 1 x 1 with Open Stud | Reddish Brown
| 3 | | | |
| Plate 2 x 2 Corner | Lime
| 2 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Black
| 3 | | | |
| Brick Special 1 x 2 Palisade [aka Log] | Black
| 3 | | | |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | Black
| 2 | | | |
| Plate 2 x 4 | White
| 1 | | | |
| Weapon Harpoon [Smooth Shaft] | Pearl Gold
| 2 | | | |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | Dark Bluish Gray
| 2 | | | |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | Black
| 1 | | | |
| Wedge Plate 4 Stud 45° Angle Plate | Dark Bluish Gray
| 4 | | | |
| Plate 2 x 6 | Black
| 1 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Dark Bluish Gray
| 2 | | | |
| Plate 2 x 2 | Black
| 2 | | | |
| Wedge Plate 3 x 2 Left | Dark Bluish Gray
| 1 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Blue
| 2 | | | |
| Wedge Plate 3 x 2 Right | Dark Bluish Gray
| 1 | | | |
| Slope 45° 2 x 1 with Bottom Pin | Black
| 2 | | | |
| Plate Special 1 x 2 [Side Handle Closed Ends] | Black
| 2 | | | |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Dark Bluish Gray
| 2 | | | |
| Ring 4 x 4 with 2 x 2 Hole and 4 Arrow Ends (Ninjago Spinner Crown) | Pearl Gold
| 1 | | | |
| Bracket 1 x 2 - 2 x 2 | Dark Bluish Gray
| 2 | | | |
| Plate Special 1 x 2 5.9mm End Cup | Light Bluish Gray
| 2 | | | |
| Plate 2 x 8 | Dark Purple
| 1 | | | |
| Wedge Plate 3 x 3 Cut Corner | Dark Bluish Gray
| 2 | | | |
| Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed | Black
| 1 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Black
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Magenta
| 1 | | | |
| Plate Round 4 x 4 with Pin Hole | Red
| 1 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Light Bluish Gray
| 2 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 2 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black
| 2 | | | |
| Wedge Plate 8 x 3, 22° Left | Dark Bluish Gray
| 1 | | | |
| Wedge Plate 8 x 3, 22° Right | Dark Bluish Gray
| 1 | | | |
| Brick Special 2 x 2 with Pin and Axle Hole | White
| 2 | | | |
| Technic Axle Towball | Light Bluish Gray
| 2 | | | |
| Plate 1 x 4 | Yellow
| 1 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 1 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 1 | | | |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | Pearl Gold
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Trans-Purple
| 1 | | | |
| Plate 1 x 2 | Black
| 1 | | | |
| Plate 1 x 2 | Black
| 1 | | | |
| Plate Special 2 x 2 with Pin on Bottom | Dark Tan
| 2 | | | |
| Technic Brick Special 2 x 2 with Pin Hole, with 2 Rotation Joint Sockets | Black
| 1 | | | |
| Wedge Curved Inverted 6 x 4 | Black
| 1 | | | |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | Black
| 1 | | | |
| Wedge Plate 2 x 4 | Dark Blue
| 1 | | | |
| Plate Special 1 x 2 with Clip Horizontal on Side | Black
| 1 | | | |
| Cone 1 x 1 [Top Groove] | Trans-Red
| 1 | | | |
| Technic Axle 2 Notched | Red
| 1 | | | |