 | Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts  | Dark Bluish Gray
| 8 | | | |
 | Wedge Curved 4 x 4 No Top Studs  | White
| 6 | | | |
 | Plate Special 2 x 2 with Horizontal T-Bar Underneath  | Black
| 4 | | | |
 | Bar Holder with Clip and 90° Angle (Mechanical Leg)  | Black
| 8 | | | |
 | Tile 3 x 3 Curved, Macaroni  | Black
| 4 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6453281.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]  | Pearl Gold
| 9 | | | |
 | Plate Round Corner 2 x 2 with 1 x 1 Cutout  | Dark Bluish Gray
| 8 | | | |
 | Tile 2 x 2 with Modern Classic Space Logo print  | White
| 5 | | | |
 | Rock 1 x 1 Crystal 5 Point  | Opal Trans-Purple
| 5 | | | |
 | Brick 1 x 6 x 4 with 4 Pin Holes and Opening  | Reddish Orange
| 5 | | | |
 | Plate 1 x 1 x 2/3 with Open Stud  | White
| 12 | | | |
 | Tile Round 2 x 2 Half Circle  | White
| 2 | | | |
 | Slope Curved 1 x 4 x 1 2/3 No Studs  | White
| 4 | | | |
 | Slope Curved 2 x 2 x 2/3  | White
| 11 | | | |
 | Plate Special 1 x 4 Rounded with 2 Open Studs  | Black
| 4 | | | |
 | Plate 1 x 2  | Reddish Orange
| 12 | | | |
 | Plate 1 x 8  | White
| 8 | | | |
 | Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale)  | Black
| 9 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Dark Bluish Gray
| 4 | | | |
 | Torso Space Suit, Dark Blue and Sand Blue Panel, Gold Lines, Classic Space Logo Print, Dark Azure Arms, Dark Blue Hands  | White
| 1 | | | |
 | Plate Special 2 x 2 with Pin on Bottom  | White
| 6 | | | |
 | Brick Round 1 x 1 Open Stud  | Opal Trans-Purple
| 6 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | White
| 12 | | | |
 | Brick Special 1 x 2 Rounded with Center Bars  | Pearl Gold
| 6 | | | |
 | Book Cover with White HUD, Target, and Dark Blue Graphs Print  | Trans-Light Blue
| 2 | | | |
 | Brick 1 x 3  | White
| 12 | | | |
 | Panel 6 x 5 x 3 1/3 Curved Top  | Trans-Black
| 1 | | | |
 | Plate Round Corner 5 x 5 with 4 x 4 Round Cutout  | Black
| 4 | | | |
 | Plate Round Corners 2 x 6 Double  | White
| 12 | | | |
 | Hair Short Curly, No Sides  | Black
| 1 | | | |
 | Wedge 4 x 4 Facet  | White
| 4 | | | |
 | Hips and White Legs  | White
| 1 | | | |
 | Hips and White Legs  | White
| 1 | | | |
 | Hips and White Legs  | White
| 1 | | | |
 | Hair Coiled and Short  | Dark Brown
| 1 | | | |
 | Plate 1 x 2  | Trans-Light Blue
| 8 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389401.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | White
| 4 | | | |
 | Tile 1 x 2 with Battery, Graph print  | White
| 3 | | | |
 | Plate 1 x 5  | Tan
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 18 | | | |
 | Tile Round 1 x 2  | Light Bluish Gray
| 3 | | | |
 | Tile Special 2 x 2 Inverted  | White
| 3 | | | |
 | Plate 1 x 4  | White
| 9 | | | |
 | Hips and White Legs with Dark Blue, Sand Blue, and Gold Space Suit Orange Stripe with Triangle on Knees Print  | Dark Blue
| 1 | | | |
 | Helmet Space, White Neck Pattern  | Dark Azure
| 1 | | | |
 | Helmet Space, White Neck Pattern  | Dark Azure
| 1 | | | |
 | Helmet Space, White Neck Pattern  | Dark Azure
| 1 | | | |
 | Helmet Space with Air Intakes and Hole on Top  | Bright Green
| 1 | | | |
![Image of part Box 2 x 2 x 2 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4143247.jpg) | Box 2 x 2 x 2 [Hollow Studs]  | Black
| 4 | | | |
 | Brick 1 x 4  | Sand Blue
| 4 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/6468361.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Reddish Orange
| 6 | | | |
 | Helmet Space, Flat  | Bright Light Orange
| 1 | | | |
 | Plate 4 x 8  | Dark Bluish Gray
| 2 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6467819.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | Trans-Black
| 1 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Sand Blue
| 8 | | | |
 | Bracket 1 x 1 - 1 x 1  | Dark Bluish Gray
| 4 | | | |
 | Tile 4 x 4 Curved, Macaroni  | White
| 4 | | | |
 | Brick Special 1 x 2 with Grille  | White
| 8 | | | |
 | Plate 1 x 8  | Reddish Orange
| 2 | | | |
 | Minifig Head, Goatee Beard, Dark Turquoise Hearing Aid print  | Yellow
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6469829.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Trans-Clear
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6469829.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Trans-Clear
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6469829.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Trans-Clear
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Light Bluish Gray
| 8 | | | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | Sand Blue
| 4 | | | |
 | Minifig Head, Eyebrows, Glasses with Thick Edge, Peach Lips Print  | Yellow
| 1 | | | |
 | Box 2 x 2 x 2 Door with Slot  | White
| 4 | | | |
![Image of part Minifig Head, Beard Stubble, Raised Eyebrow, White Pupils Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/4657964.jpg) | Minifig Head, Beard Stubble, Raised Eyebrow, White Pupils Print [Hollow Stud]  | Yellow
| 1 | | | |
 | Brick 1 x 6  | Black
| 2 | | | |
 | Tile 2 x 2 Curved, Macaroni  | White
| 4 | | | |
 | Tile 2 x 6  | White
| 2 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | White
| 8 | | | |
 | Hair Ponytail and Swept Sideways Fringe  | Reddish Brown
| 1 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | White
| 6 | | | |
 | Minifig Head, Open Mouth Smile, Peach Lips  | Yellow
| 1 | | | |
 | Door Frame 1 x 4 x 4 (Lift)  | Black
| 2 | | | |
 | Plate 4 x 12  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with Clip Vertical on End  | Medium Azure
| 4 | | | |
 | Brick 1 x 6  | Tan
| 2 | | | |
 | Plate Special 1 x 1 with Handle on 2 Ends  | Black
| 1 | | | |
 | Slope 65° 2 x 1 x 2  | White
| 4 | | | |
 | Plate Round Corners 2 x 6 Double  | Dark Bluish Gray
| 2 | | | |
 | Bar Holder with Clip  | Flat Silver
| 2 | | | |
 | Brick 1 x 1  | Sand Blue
| 4 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6326078.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Light Bluish Gray
| 9 | | | |
 | Plate 6 x 8  | Dark Bluish Gray
| 1 | | | |
 | Plate 1 x 1 x 2/3 Half Round with Side Stud  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 8  | Dark Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 2 x 2/3  | White
| 5 | | | |
 | Tile 1 x 1 with Groove  | White
| 5 | | | |
 | Plate 1 x 8  | Black
| 2 | | | |
 | Plate 1 x 1  | Black
| 5 | | | |
 | Wedge Plate 4 x 6  | Sand Blue
| 4 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515364.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | White
| 8 | | | |
 | Plate 6 x 6  | Light Bluish Gray
| 1 | | | |
 | Hair Short, Tousled with Side Part  | Dark Orange
| 1 | | | |
 | Brick 1 x 2  | Tan
| 4 | | | |
 | Plate 1 x 4  | Sand Blue
| 4 | | | |
 | Plate Special 4 x 4 with 2 x 2 Opening  | Light Bluish Gray
| 4 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6425507.jpg) | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]  | Black
| 3 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 6 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Dark Bluish Gray
| 6 | | | |
 | Plate 1 x 2  | White
| 5 | | | |
![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/4650644.jpg) | Brick Round 2 x 2 [Grill]  | White
| 3 | | | |
 | Plate 1 x 6  | Black
| 3 | | | |
 | Tile Special 2 x 3 Pentagonal  | Black
| 2 | | | |
 | Plate Special 1 x 2 with Ladder  | Dark Bluish Gray
| 2 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Light Bluish Gray
| 3 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Black
| 2 | | | |
 | Tile 2 x 2 with Groove  | Tan
| 2 | | | |
![Image of part Slope 75° 2 x 2 x 3 [Solid Studs]](https://cdn.rebrickable.com/media/parts/elements/6000853.jpg) | Slope 75° 2 x 2 x 3 [Solid Studs]  | Dark Bluish Gray
| 1 | | | |
 | Tile 2 x 2 with Groove  | White
| 3 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6210076.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | White
| 3 | | | |
 | Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout  | Black
| 5 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Flat Silver
| 9 | | | |
 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper)  | Light Bluish Gray
| 2 | | | |
 | Plant, Stem with 3 Leaves and Bottom Pin  | Bright Green
| 2 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Dark Bluish Gray
| 4 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4211372.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Light Bluish Gray
| 7 | | | |
 | Plate 2 x 4  | White
| 2 | | | |
 | Bar 2L with Stop in Center  | White
| 2 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6372479.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Sand Blue
| 2 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370001.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | White
| 4 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder with Pepperoni Pizza Print  | Tan
| 1 | | | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6345427.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]  | Blue
| 4 | | | |
 | Plate 2 x 2 Corner  | Blue
| 4 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Orange
| 11 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Black
| 2 | | | |
 | Brick 2 x 2 Corner  | White
| 2 | | | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots  | Black
| 11 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Tan
| 2 | | | |
 | Plate Special 10 x 10 Octagonal with Hole  | Dark Tan
| 1 | | | |
 | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder  | White
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Sand Blue
| 2 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Black
| 4 | | | |
 | Brick Special 1 x 1 Studs on 4 Sides  | Black
| 1 | | | |
 | Wedge Plate 2 x 4 27° Left  | Black
| 1 | | | |
 | Plate Special 1 x 2 with Door Rail  | Black
| 2 | | | |
 | Plant, Fern 2 x 3 x 2  | Green
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Clear
| 3 | | | |
 | Plate Round 4 x 4 with Pin Hole  | White
| 2 | | | |
 | Wedge Plate 2 x 4 27° Right  | Black
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278409.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Orange
| 6 | | | |
![Image of part Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]](https://cdn.rebrickable.com/media/parts/elements/6021504.jpg) | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]  | Black
| 4 | | | |
 | Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone)  | Dark Bluish Gray
| 2 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | White
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Opal Trans-Purple
| 1 | | | |
 | Plate 2 x 4  | Medium Azure
| 4 | | | |
 | Tile 1 x 6 with Groove  | Black
| 1 | | | |
 | Plate 1 x 4  | Light Bluish Gray
| 2 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 2 | | | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider  | Tan
| 2 | | | |
![Image of part Pneumatic T-Piece (T Bar) [New Style]](https://cdn.rebrickable.com/media/parts/elements/4211508.jpg) | Pneumatic T-Piece (T Bar) [New Style]  | Light Bluish Gray
| 2 | | | |
 | Plate Special 1 x 1 Rounded with Handle  | Light Bluish Gray
| 1 | | | |
 | Tile Round 1 x 1 with Battery print  | White
| 1 | | | |
 | Tile Round 1 x 1 with Battery print  | White
| 1 | | | |
 | Tile 2 x 3  | White
| 1 | | | |
 | Tile Round 2 x 2 with Hole  | Dark Bluish Gray
| 2 | | | |
 | Bar 2L with Stop in Center  | Red
| 1 | | | |
 | Bar 2L with Stop in Center  | Red
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Orange
| 5 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Black
| 4 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 5 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Pearl Gold
| 6 | | | |
 | Tile 1 x 4 with Groove  | White
| 2 | | | |
 | Creature Body Part, Horn (Unicorn)  | Flat Silver
| 2 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6179812.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Sand Blue
| 2 | | | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 5 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474001.jpg) | Dish 2 x 2 Inverted [Radar]  | White
| 2 | | | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle  | Dark Bluish Gray
| 2 | | | |
 | Brick 1 x 2  | Black
| 2 | | | |
 | Tile Round 2 x 2 with Hole  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 3  | Black
| 2 | | | |
 | Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout  | White
| 2 | | | |
![Image of part Technic Plate 2 x 6 [5 Holes]](https://cdn.rebrickable.com/media/parts/elements/4527947.jpg) | Technic Plate 2 x 6 [5 Holes]  | White
| 1 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Dark Azure
| 3 | | | |
 | Plate 2 x 2 Corner  | Black
| 2 | | | |
 | Plate Round 2 x 2 with Pin Hole and 4 Bars Up  | Black
| 1 | | | |
 | Wedge Plate 8 x 3, 22° Left  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4213607.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Dark Bluish Gray
| 1 | | | |
 | Brick and Axle Separator v2.0  | Orange
| 1 | | | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6287673.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]  | Flat Silver
| 1 | | | |
 | Tile 1 x 6 with Groove  | White
| 1 | | | |
 | Plate 2 x 3  | Dark Bluish Gray
| 2 | | | |
 | Wedge Plate 8 x 3, 22° Right  | Black
| 2 | | | |
 | Wedge Plate 3 x 2 Left  | White
| 1 | | | |
 | Tile Round 1 x 1 Half Circle  | Bright Green
| 2 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6271228.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Tan
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | White
| 1 | | | |
 | Plate 2 x 2  | Black
| 2 | | | |
 | Plate 2 x 2  | Tan
| 2 | | | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top  | Black
| 2 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Black
| 2 | | | |
 | Plate Round 1 x 1 with Open Stud  | Pearl Gold
| 3 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Light Blue
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | White
| 2 | | | |
![Image of part Tile Special 2 x 2 with Top Pin [Squared Holes]](https://cdn.rebrickable.com/media/parts/elements/6313191.jpg) | Tile Special 2 x 2 with Top Pin [Squared Holes]  | Black
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth  | Light Bluish Gray
| 2 | | | |
 | Creature Body Part, Horn (Unicorn)  | Flat Silver
| 1 | | | |
 | Plate 2 x 2  | Yellow
| 2 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Tan
| 1 | | | |
 | Tile Round 1 x 1 Half Circle  | Bright Light Orange
| 1 | | | |
 | Tile Round 1 x 1 Half Circle  | Bright Light Orange
| 1 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Pearl Gold
| 2 | | | |
 | Wedge Curved Inverted 10 x 6 x 2 Cockpit  | Black
| 1 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Bluish Gray
| 2 | | | |
 | Tool Screwdriver and Spanner / Wrench  | Flat Silver
| 1 | | | |
 | Plant, Plate 1 x 1 Round with 3 Leaves  | Lime
| 1 | | | |
 | Tile 1 x 2 with Groove  | Bright Light Orange
| 1 | | | |
 | Plate 2 x 2  | Red
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211111.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6254045.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | Black
| 1 | | | |
 | Plate Round 1 x 1 with Open Stud  | Light Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Open Stud  | Light Bluish Gray
| 1 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Black
| 1 | | | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/4649224.jpg) | Arm Mechanical with Clip [Thick Support]  | White
| 1 | | | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 1 | | | |