 | Wing, Tail 4 x 1 x 3   | Light Bluish Gray
| 2 | $1.12 | $2.24 | |
 | Geode / Rock with Trans-Light Blue Crystal Pattern | Dark Bluish Gray
| 2 | $1.07 | $2.14 | |
 | Plate 1 x 2 | Trans-Light Blue
| 12 | $0.11 | $1.30 | |
![Image of part Rubber Belt Small [15mm ID] [Round Cross Section]](https://cdn.rebrickable.com/media/parts/elements/4544140.jpg) | Rubber Belt Small [15mm ID] [Round Cross Section] | White
| 1 | $1.28 | $1.28 | |
![Image of part Flag 2 x 2 Square, Flared Clip Edge [Thick Clips] with Classic Space Logo Print](https://cdn.rebrickable.com/media/parts/elements/6317066.jpg) | Flag 2 x 2 Square, Flared Clip Edge [Thick Clips] with Classic Space Logo Print | White
| 1 | $1.26 | $1.26 | |
 | Windscreen 7 x 4 x 2 Round with Handle | Trans-Light Blue
| 2 | $0.54 | $1.08 | |
 | Torso Jacket, Zipper, Classic Space Logo, Silver Pilot Wings Badge Print, Dark Azure Arms, Yellow Hands | Dark Azure
| 1 | $0.97 | $0.97 | |
 | Tile Special 2 x 3 Pentagonal | Dark Azure
| 2 | $0.45 | $0.89 | |
 | Torso, Dual Molded Arms, Spacesuit, Silver Belt, Red Buttons, Light Bluish Gray Trim Print, Dark Azure Sleeves Pattern, White Arms and Hands | White
| 1 | $0.89 | $0.89 | |
 | Minifig Head, Dark Brown Eyebrows, Glasses, Open Mouth Smile with Teeth Print | Yellow
| 1 | $0.78 | $0.78 | |
 | Slope 30° 1 x 2 x 2/3 with Classic Space Logo Print | White
| 1 | $0.78 | $0.78 | |
 | Hinge Tile 1 x 3 Locking with 1 Finger on Top with Cutout | Light Bluish Gray
| 2 | $0.38 | $0.76 | |
 | Tile 2 x 6 | Dark Azure
| 2 | $0.38 | $0.76 | |
 | Hair Coiled, Straight Sides | Dark Brown
| 1 | $0.74 | $0.74 | |
 | Plate 1 x 8 | Light Bluish Gray
| 4 | $0.18 | $0.70 | |
 | Hips and Dark Azure Legs | Dark Azure
| 1 | $0.69 | $0.69 | |
 | Helmet Space, Black Neck Pattern | White
| 1 | $0.65 | $0.65 | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6208446.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | Flat Silver
| 6 | $0.11 | $0.65 | |
 | Wedge Sloped 45° 2 x 2 Corner | Dark Bluish Gray
| 6 | $0.11 | $0.65 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Dark Tan
| 4 | $0.15 | $0.59 | |
 | Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End) | Yellow
| 2 | $0.30 | $0.59 | |
 | Wedge Plate 7 x 6 Boat Bow with Stud Notches | Light Bluish Gray
| 1 | $0.57 | $0.57 | |
 | Engine, Strakes, 2 x 2 Thin Top Plate | Pearl Titanium
| 2 | $0.28 | $0.57 | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/6399650.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°] | Yellow
| 1 | $0.55 | $0.55 | |
 | Hair Mid-Length Swept Sideways | Black
| 1 | $0.51 | $0.51 | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6093859.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Light Bluish Gray
| 4 | $0.12 | $0.49 | |
 | Plate 1 x 6 | Dark Blue
| 7 | $0.07 | $0.47 | |
 | Hips and White Legs with Red Line/Triangle Print | Dark Azure
| 1 | $0.47 | $0.47 | |
 | Slope 65° 2 x 1 x 2 | Dark Bluish Gray
| 2 | $0.23 | $0.46 | |
 | Minifig Head, Thin Eyebrows, Eyelashes, White Pupils and Peach Lips Smile Print | Yellow
| 1 | $0.43 | $0.43 | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6390119.jpg) | Headwear Accessory Visor [Large with Trapezoid Top] | Dark Blue
| 1 | $0.42 | $0.42 | |
 | Hair Spiked | Medium Nougat
| 1 | $0.42 | $0.42 | |
 | Grab Claw with Axle | Dark Azure
| 2 | $0.20 | $0.41 | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6024715.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Yellow
| 2 | $0.20 | $0.41 | |
 | Antenna 1 x 4 with Flat Top | Yellow
| 2 | $0.20 | $0.41 | |
 | Windscreen 7 x 4 x 1 2/3 with Hinges, 7 Teeth | White
| 1 | $0.41 | $0.41 | |
 | Slope 45° 2 x 2 with Computer Screen, Lever Print | White
| 1 | $0.41 | $0.41 | |
 | Wave / Flame Rounded with Base Rim | Glitter Trans-Light Blue
| 4 | $0.09 | $0.38 | |
 | Slope Curved 3 x 1 No Studs | White
| 4 | $0.09 | $0.38 | |
 | Tile Special 2 x 3 with 2 Clips without Tab between Clips with Solar Panel print | Dark Blue
| 2 | $0.19 | $0.38 | |
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211787.jpg) | Dish 3 x 3 Inverted [Radar] | Light Bluish Gray
| 2 | $0.19 | $0.38 | |
 | Hinge Brick 1 x 2 Top Plate Thin | Black
| 2 | $0.19 | $0.38 | |
 | Minifig Neckwear Front Harness with 4 Back Studs | Dark Azure
| 1 | $0.37 | $0.37 | |
 | Tile Special 2 x 3 Pentagonal | White
| 2 | $0.18 | $0.35 | |
 | Wave / Flame Rounded Large with Marbled Trans-Yellow Pattern | Trans-Red
| 2 | $0.16 | $0.32 | |
 | Wedge Plate 2 x 2 Cut Corner | Yellow
| 2 | $0.16 | $0.32 | |
 | Slope 45° 2 x 1 with Bottom Pin | Trans-Light Blue
| 2 | $0.16 | $0.32 | |
 | Equipment Net | Medium Nougat
| 1 | $0.32 | $0.32 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs | Yellow
| 3 | $0.11 | $0.32 | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6271127.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | Dark Bluish Gray
| 4 | $0.08 | $0.32 | |
 | Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | Dark Bluish Gray
| 4 | $0.08 | $0.32 | |
 | Brick 1 x 4 | White
| 2 | $0.15 | $0.30 | |
 | Helmet Underwater / Space, Breathing Apparatus | White
| 1 | $0.30 | $0.30 | |
 | Plate 2 x 12 | Light Bluish Gray
| 1 | $0.28 | $0.28 | |
 | Tile Round 1 x 1 | Black
| 5 | $0.05 | $0.27 | |
 | Slope 30° 1 x 1 x 2/3 with Two Rounded White Squares Print | Trans-Dark Blue
| 2 | $0.14 | $0.27 | |
 | Slope Curved 2 x 2 with Lip, No Studs | White
| 2 | $0.14 | $0.27 | |
 | Hinge Brick 1 x 2 Base | White
| 2 | $0.14 | $0.27 | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top | White
| 4 | $0.07 | $0.27 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Orange
| 3 | $0.08 | $0.24 | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4585493.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends] | Pearl Gold
| 4 | $0.05 | $0.22 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6137300.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Dark Azure
| 4 | $0.05 | $0.22 | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/6109454.jpg) | Dish 2 x 2 Inverted [Radar] | Trans-Orange
| 4 | $0.05 | $0.22 | |
 | Bucket 1 x 1 x 1 Handle | Black
| 2 | $0.11 | $0.22 | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Wave / Flame Small with Pin | Trans-Light Blue
| 2 | $0.11 | $0.22 | |
 | Tile Round 1 x 1 with Gauge Print | Light Bluish Gray
| 2 | $0.11 | $0.22 | |
 | Weapon Gun / Blaster with Studs on Side | White
| 1 | $0.22 | $0.22 | |
 | Plate 1 x 4 | Yellow
| 3 | $0.07 | $0.20 | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed | Light Bluish Gray
| 3 | $0.07 | $0.20 | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/4609766.jpg) | Headwear Accessory Visor [Large with Trapezoid Top] | Metallic Gold
| 1 | $0.20 | $0.20 | |
 | Brick Special 1 x 2 with Studs on 2 Sides | White
| 1 | $0.20 | $0.20 | |
 | Plate 2 x 4 | Dark Bluish Gray
| 2 | $0.09 | $0.19 | |
 | Brick Special 1 x 2 x 2/3 with Studs on Sides | Black
| 2 | $0.09 | $0.19 | |
 | Support Round 2 x 2 x 2 Stand with Reinforced Underside | Dark Bluish Gray
| 3 | $0.05 | $0.16 | |
 | Brick Special 1 x 1 Studs on 4 Sides | Dark Bluish Gray
| 1 | $0.16 | $0.16 | |
 | Brick 2 x 4 | Medium Nougat
| 1 | $0.16 | $0.16 | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket | Light Bluish Gray
| 4 | $0.04 | $0.16 | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | Black
| 4 | $0.04 | $0.16 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Light Blue
| 4 | $0.04 | $0.16 | |
 | Plate Special 1 x 2 with End Towball | Dark Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Cone 3 x 3 x 2 | Black
| 2 | $0.08 | $0.16 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | White
| 4 | $0.04 | $0.16 | |
 | Plate Special 1 x 2 with Clip Horizontal on End | Light Bluish Gray
| 4 | $0.04 | $0.16 | |
 | Wheel Skateboard / Trolley | Black
| 4 | $0.04 | $0.16 | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6249091.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | White
| 4 | $0.04 | $0.16 | |
 | Wedge Plate 4 x 6 | White
| 1 | $0.15 | $0.15 | |
 | Slope 45° 2 x 2 with Computer Screen, with Crosshairs print | White
| 1 | $0.15 | $0.15 | |
 | Bucket 1 x 1 x 1 | Light Bluish Gray
| 1 | $0.15 | $0.15 | |
 | Brick Round 2 x 2 Truncated Cone | Black
| 2 | $0.07 | $0.14 | |
 | Wedge Plate 6 x 6 Cut Corner | Black
| 2 | $0.07 | $0.14 | |
 | Tile Special 1 x 2 Grille with Bottom Groove | Dark Azure
| 2 | $0.07 | $0.14 | |
 | Brick and Axle Separator v2.0 | Orange
| 1 | $0.14 | $0.14 | |
 | Equipment Metal Detector, no Stud on Search Head | Black
| 1 | $0.14 | $0.14 | |
 | Tile Round 1 x 1 with Hollow Bar | Dark Azure
| 3 | $0.04 | $0.12 | |
 | Wedge Plate 6 x 3 Left | Black
| 2 | $0.05 | $0.11 | |
 | Wave / Flame Rounded with Base Rim | Trans-Orange
| 4 | $0.03 | $0.11 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529247.jpg) | Cone 1 x 1 [Top Groove] | Pearl Gold
| 4 | $0.03 | $0.11 | |
 | Slope Curved 4 x 1 Inverted | Black
| 2 | $0.05 | $0.11 | |
 | Slope 45° 2 x 1 with Bottom Pin | Light Bluish Gray
| 2 | $0.05 | $0.11 | |
 | Engine / Air Scoop 2 x 2 | Flat Silver
| 2 | $0.05 | $0.11 | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg) | Plate Special 1 x 2 [Open O Top Clip] | Black
| 4 | $0.03 | $0.11 | |
| Wheel Holder, Plate, Round 2 x 2 Thin with Clips | Light Bluish Gray
| 4 | $0.03 | $0.11 | |
 | Wedge Plate 6 x 3 Right | Black
| 2 | $0.05 | $0.11 | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Black
| 2 | $0.05 | $0.11 | |
 | Plant, Banana | Yellow
| 1 | $0.11 | $0.11 | |
 | Bar Holder with Clip | Black
| 1 | $0.09 | $0.09 | |
 | Wedge Sloped Inverted 6 x 6 x 1 Triple | Black
| 1 | $0.09 | $0.09 | |
![Image of part Food Turkey Drumstick [Long] - 22mm Oval Opening](https://cdn.rebrickable.com/media/parts/elements/6247204.jpg) | Food Turkey Drumstick [Long] - 22mm Oval Opening | Dark Orange
| 1 | $0.09 | $0.09 | |
 | Brick 1 x 2 without Bottom Tube | Trans-Light Blue
| 1 | $0.09 | $0.09 | |
 | Plate Round 1 x 1 with Solid Stud | Yellow
| 3 | $0.03 | $0.08 | |
 | Lever Small Base with Black Lever | Blue
| 3 | $0.03 | $0.08 | |
 | Wedge Plate 3 x 6 Cut Corners | Dark Tan
| 2 | $0.04 | $0.08 | |
| Brick Round 1 x 1 Open Stud | Red
| 2 | $0.04 | $0.08 | |
 | Plate Special 1 x 4 Offset with Bar Holes | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Tool Jackhammer / Motor Hammer | Dark Bluish Gray
| 1 | $0.08 | $0.08 | |
 | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes | Black
| 2 | $0.04 | $0.08 | |
 | Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed | Yellow
| 1 | $0.08 | $0.08 | |
 | Slope 45° 2 x 1 with Bottom Pin | Yellow
| 2 | $0.04 | $0.08 | |
 | Engine, Smooth Small, 1 x 2 Side Plate with Axle Holders and Slot | Dark Bluish Gray
| 2 | $0.04 | $0.08 | |
 | Tail Shuttle - Small | White
| 2 | $0.04 | $0.08 | |
 | Tile Special 1 x 2 with Handle | Dark Azure
| 2 | $0.04 | $0.08 | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029946.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow] | Red
| 1 | $0.07 | $0.07 | |
 | Tool Screwdriver and Spanner / Wrench | Flat Silver
| 1 | $0.07 | $0.07 | |
 | Brick Round 2 x 2 Dome Top, Hollow Stud | Red
| 1 | $0.07 | $0.07 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Azure
| 1 | $0.05 | $0.05 | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512363.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation] | Black
| 1 | $0.05 | $0.05 | |
 | Tile Special 1 x 1 with Clip with Rounded Edges | Black
| 1 | $0.05 | $0.05 | |
 | Brick Round 2 x 2 with Axle Hole | Red
| 1 | $0.05 | $0.05 | |
 | Antenna 1 x 4 with Flat Top | Light Bluish Gray
| 1 | $0.05 | $0.05 | |
 | Technic Pin without Friction Ridges Lengthwise | Yellow
| 2 | $0.03 | $0.05 | |
 | Plate 1 x 2 | White
| 1 | $0.05 | $0.05 | |
 | Plate Special 1 x 4 with Angled Tubes | Flat Silver
| 2 | $0.03 | $0.05 | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/383901.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | White
| 2 | $0.03 | $0.05 | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg) | Equipment Cup / Mug [Plain] | Red
| 1 | $0.04 | $0.04 | |
 | Wedge Plate 4 x 6 | Black
| 1 | $0.04 | $0.04 | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515364.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends] | White
| 1 | $0.04 | $0.04 | |
 | Headwear Accessory Visor For Standard Helmet | Trans-Brown
| 1 | $0.04 | $0.04 | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Dark Tan
| 1 | $0.04 | $0.04 | |
 | Plate 2 x 2 | Yellow
| 1 | $0.04 | $0.04 | |
 | Technic Axle Towball | Light Bluish Gray
| 1 | $0.03 | $0.03 | |
