Rocket Launch Center (60351-1)
Price Comparison
No retailers currently stock Rocket Launch Center in Andorra.
Create your personal pricewatch
Create an account to get your personal pricewatch. You will receive an email each time the price of a set in your pricewatch changes.
Go to the login/registration to set up your pricewatch.
Set details
Name: Rocket Launch CenterSet number: 60351-1
Year: 2022
Theme: City
Number of parts: 1010
Number of part types: 331
Age rating: 7+
Retirement date: 31-12-2023
Browse all 1010 parts in set 60351-1 with individual pricing from BrickLink or Brick Owl.
Pricing information known of 327/331 parts.
| Part | Color | Quantity | Average price | Total | Value | |||
|---|---|---|---|---|---|---|---|---|
![]() | Support 1 x 6 x 5 Girder Rectangular ![]() | |||||||
![]() | Plate 16 x 16 ![]() | |||||||
![]() | Cone Half 2 x 4 x 3 ![]() | |||||||
![]() | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout ![]() | |||||||
![]() | Cylinder Half 2 x 4 x 5 with 1 x 2 cutout ![]() | |||||||
![]() | Panel Curved, Quarter, with Bars at Each End ![]() | |||||||
![]() | Slope Inverted 75° 2 x 1 x 3 ![]() | |||||||
![]() | Barrel Half Large with Axle Hole ![]() | |||||||
![]() | Garage Roller Door Section without Handle ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | String with End Studs 41L Overall ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Plate 8 x 16 ![]() | |||||||
![]() | Rock 4 x 4 x 1 1/3, Top with Trans-Light Blue Crystals Pattern ![]() | |||||||
![]() | Rock 4 x 4 x 1 2/3, Bottom with Trans-Light Blue Crystals Pattern ![]() | |||||||
![]() | Barrel Half Large with Axle Hole ![]() | |||||||
![]() | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole ![]() | |||||||
![]() | Brick 1 x 12 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 Inverted ![]() | |||||||
![]() | Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes ![]() | |||||||
![]() | Fuselage 6 x 10 x 4 Round ![]() | |||||||
![]() | Slope Curved 8 x 6 x 2 Double ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections ![]() | |||||||
![]() | Slope 25° 1 x 8 x 3 ![]() | |||||||
![]() | Plate Round Half 4 x 8 ![]() | |||||||
![]() | Panel 1 x 6 x 5 ![]() | |||||||
![]() | Technic Brick 1 x 1 with Axle Hole ![]() | |||||||
![]() | Brick Round Corner 3 x 3 x 1 No Studs ![]() | |||||||
![]() | Vehicle Track, Train, Plain Rail Straight (no slots, no notches on end) ![]() | |||||||
![]() | Brick Special 1 x 2 with Groove ![]() | |||||||
![]() | Tile 2 x 6 ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Aircraft Fuselage Curved Forward 6 x 7 x 2 2/3 Top ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Brick Special 1 x 2 with Pin - Bottom Stud Holder ![]() | |||||||
![]() | Technic Pin Connector Round [Slotted] ![]() | |||||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | |||||||
![]() | Aircraft Fuselage Curved Forward 6 x 9 x 4 1/3 Bottom ![]() | |||||||
![]() | Fence 1 x 4 x 2 Ornamental Asian Lattice Square with 4 Studs ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Slope 45° 2 x 2 with Computer Screen, Lever Print ![]() | |||||||
![]() | Animal, Bird, Parrot, Wide Beak and Tail with Marbled Blue Pattern ![]() | |||||||
![]() | Minifig Head [Plain] [Hollow Stud] ![]() | |||||||
![]() | Brick Arch 1 x 6 x 3 1/3 Curved Top ![]() | |||||||
![]() | Technic Pin Connector Hub with 1 Axle ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise with No Center Slots ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Tile 2 x 2 Curved, Macaroni ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Plant, Beehive / Nest ![]() | |||||||
![]() | Garage Roller Door Section with Handle ![]() | |||||||
![]() | Wheel 11 x 6 with Smooth Hubcap ![]() | |||||||
![]() | Steering Wheel Small, 2 x 2 [Reinforced] ![]() | |||||||
![]() | Brick 2 x 2 x 3 ![]() | |||||||
![]() | Panel 1 x 6 x 5 ![]() | |||||||
![]() | Technic Axle 4 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 Inverted ![]() | |||||||
![]() | Tile Special 2 x 3 with 2 Clips without Tab between Clips ![]() | |||||||
![]() | Brick Special 1 x 14 Grooved ![]() | |||||||
![]() | Technic Beam 1 x 9 Thick ![]() | |||||||
![]() | Slope Curved 2 x 1 Inverted ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Glass for Window 1 x 4 x 6 ![]() | |||||||
![]() | Brick Round 4 x 4 Centre Hole ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Minifig Neckwear Airtanks with Large Holes ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Plate Special 1 x 6 with Train Wagon End Fence ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Tile 2 x 2 Corner ![]() | |||||||
![]() | Dish 4 x 4 Inverted with Open Stud [Radar] ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Brick 1 x 2 x 5 with Hollow Studs ![]() | |||||||
![]() | Door Frame 1 x 4 x 6 Type 2 ![]() | |||||||
![]() | Hair Coiled and Short ![]() | |||||||
![]() | Technic Axle 10 ![]() | |||||||
![]() | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes ![]() | |||||||
![]() | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Brick 1 x 16 ![]() | |||||||
![]() | Brick Special 1 x 2 x 5 with Groove ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Lattice 3 x 6 Module with Studs ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 Inverted ![]() | |||||||
![]() | Tile Round 1 x 1 with Bacteria Print ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges] ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Hair Swept Left Tousled [Plain] ![]() | |||||||
![]() | Tile Round 1 x 1 with Hollow Bar ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports ![]() | |||||||
![]() | Technic Driving Ring Extension, 8 Ridges ![]() | |||||||
![]() | Tile 2 x 3 ![]() | |||||||
![]() | Tile 1 x 2 with Controls print ![]() | |||||||
![]() | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge] ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Slope Curved 3 x 1 No Studs ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 with Classic Space Logo Print ![]() | |||||||
![]() | Cone 4 x 4 x 2, Axle Hole [Plain] ![]() | |||||||
![]() | Slope Curved 4 x 2 No Studs ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes ![]() | |||||||
![]() | Plant, Leaves 6 x 5 Swordleaf with Clip [Thick Open O Clip] ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Technic Pin Connector Perpendicular Long ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Edges ![]() | |||||||
![]() | Brick 1 x 1 x 3 ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Tyre 14 x 6 Solid Smooth ![]() | |||||||
![]() | Tyre 21 x 12 with Offset Tread Small Wide and Center Band ![]() | |||||||
![]() | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin ![]() | |||||||
![]() | Tile Round 2 x 2 with Hole ![]() | |||||||
![]() | Technic Worm Gear Short ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Bar 3L ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 ![]() | |||||||
![]() | Brick 1 x 4 x 3 ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Plant, Stem with 3 Leaves and Bottom Pin ![]() | |||||||
![]() | Plate Round Corner 6 x 6 ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | |||||||
![]() | Technic Axle 9 ![]() | |||||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Square Pin Hole ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section ![]() | |||||||
![]() | Panel 1 x 2 x 1 with Rounded Corners and Central Divider ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Brick Round 2 x 2 Dome Top, Hollow Stud ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Technic Gear 12 Tooth Double Bevel ![]() | |||||||
![]() | Slope 45° 2 x 3 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Plate Special 3 x 2 with Rounded End, Hole ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] ![]() | |||||||
![]() | Plate Special 1 x 1 Rounded with Handle ![]() | |||||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Tile 1 x 2 with Controls, Slides, Joystick print ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Technic Beam 1 x 3 Thick ![]() | |||||||
![]() | Plate Round Corner 3 x 3 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Equipment Magnifying Glass with Thick Frame, Hollow Handle, Trans-Clear Lens ![]() | |||||||
![]() | Tile 1 x 2 with Computer Keyboard with No Letters Print ![]() | |||||||
![]() | Dish 4 x 4 with 4 Studs ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Bar 3L ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Technic Arm with Gear 8 Tooth and 1.5L Axle ![]() | |||||||
![]() | Plate Special 4 x 4 with Studs on One Edge [Plain] ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Slope Inverted 45° 6 x 2 Double with 2 x 4 Recessed ![]() | |||||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | |||||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | |||||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | |||||||
![]() | Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Bar Holder with Clip ![]() | |||||||
![]() | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 with Dashboard, Speedometers Print ![]() | |||||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Panel 2 x 2 x 1 Corner ![]() | |||||||
![]() | Plate Special 1 x 2 [Open O Top Clip] ![]() | |||||||
![]() | Brick and Axle Separator v2.0 ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Cylinder 1 x 5 1/2 with Handle (Friction Cylinder) ![]() | |||||||
![]() | Slope Curved 2 x 1 No Studs [1/2 Bow] ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Brick Special 1 x 4 with Groove ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate Special 2 x 2 with Grills ![]() | |||||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | |||||||
![]() | Technic Beam 1 x 7 Thick ![]() | |||||||
![]() | Wave / Flame Small with Pin ![]() | |||||||
![]() | Wheel Arch, Mudguard 2 x 4 Studded with Hole ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Hinge Plate 1 x 4 Locking Dual 1 Finger ![]() | |||||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | |||||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | |||||||
![]() | Wave / Flame Rounded with Base Rim ![]() | |||||||
![]() | Plate Special 2 x 2 with Wheels Holder Wide [Reinforced Underside Type 2] ![]() | |||||||
![]() | Technic Axle 3 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Technic Disc 3 x 3 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Bracket 1 x 1 - 1 x 1 ![]() | |||||||
![]() | Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] ![]() | |||||||
![]() | Tile Round 2 x 2 - Thick Lifting Ring ![]() | |||||||
![]() | Bar Holder with Hole and Bar Handle ![]() | |||||||
![]() | Plate Round 2 x 2 with Pin Hole and 4 Bars Up ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Bracket 2 x 2 - 2 x 2 ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Rock 1 x 1 Crystal 4 Point ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Edges ![]() | |||||||
![]() | Turntable 2 x 2 Plate, Base ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Tile Special 1 x 2 with Handle ![]() | |||||||
![]() | Tile Round 1 x 1 with Hollow Bar ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | |||||||
![]() | Slope 65° 2 x 1 x 2 ![]() | |||||||
![]() | Cone 2 x 2 x 2, Open Stud ![]() | |||||||
![]() | Plate Round 6 x 6 with Hole ![]() | |||||||
![]() | Plate Special 2 x 2 with Wheels Holder Wide [Reinforced Underside Type 2] ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Brick Special 1 x 1 with Clip Horizontal ![]() | |||||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle ![]() | |||||||
![]() | Wedge Plate 4 x 4 with 2 x 2 Cutout ![]() | |||||||
![]() | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] ![]() | |||||||
![]() | Plate Special 1 x 2 with Pin Hole on Top ![]() | |||||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | |||||||
![]() | Brick Round 2 x 2 Truncated Cone ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Tap 1 x 1 without Hole in Spout ![]() | |||||||
![]() | Plate Special 2 x 4 with 2 Pin Holes ![]() | |||||||
![]() | Technic Beam 3 x 3 T-Shape Thick ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Bar 1 x 4 x 2 with Studs ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | |||||||
![]() | Technic Beam 1 x 3 Thick ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle ![]() | |||||||
![]() | Equipment Candlestick ![]() | |||||||
![]() | Brick Special 2 x 2 with Grooves and Axle Hole ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate ![]() | |||||||
![]() | Tool Hammer / Mallet Large ![]() | |||||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | |||||||
![]() | Steering Stand 1 x 2 with Black Steering Wheel ![]() | |||||||
![]() | Technic Pin 3/4 ![]() | |||||||
![]() | Turntable 2 x 2 Plate - Top ![]() | |||||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | |||||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Plate Special 1 x 2 5.9mm Centre Side Towball Socket ![]() | |||||||
![]() | Plate Special 2 x 2 with 2 Pin Holes ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | |||||||
![]() | Technic Axle 5 ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Pins, Square Pin Holes ![]() | |||||||
![]() | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Tool Screwdriver and Spanner / Wrench ![]() | |||||||
![]() | Equipment Cup / Mug [Plain] ![]() | |||||||
![]() | Turntable 4 x 4 Square Base, Locking ![]() | |||||||
![]() | Technic Axle 4 with Stop ![]() | |||||||
![]() | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] ![]() | |||||||
![]() | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] ![]() | |||||||
![]() | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Steering Stand 1 x 2 with Black Steering Wheel ![]() | |||||||
Missing pricing information on the following items.
| Part | Color | Quantity | |
|---|---|---|---|
![]() | Seat / Chair 2 x 2 with Center Sprue Mark ![]() | ||
![]() | Light Brick 2 x 3 x 1 1/3 with Dark Bluish Gray Base [Red LED] ![]() | ||
![]() | Sticker Sheet 2 for Set 60351-1 ![]() | ||
![]() | Sticker Sheet 1 for Set 60351-1 ![]() | ||
Minifigures included in set 60351-1.
| Minifigure | Quantity | Value | |
|---|---|---|---|
![]() | Astronaut, Female, Bright Light Orange Suit, Dark Blue Visor fig-012170, cty1430, BOID 1203158 | 1 | $3.76 |
![]() | Astronaut, Male, Bright Light Orange Suit, Dark Blue Visor fig-012171, cty1431, BOID 1189583 | 1 | $3.68 |
![]() | Dr. Barnaby Wylde fig-012168, cty1428, BOID 1169962 | 1 | $5.60 |
![]() | Gwen Ravenhurst fig-012169, cty1429, BOID 1029611 | 1 | $3.68 |
![]() | Man, Dark Azure Tracksuit with Classic Space Logo, Glasses fig-012167, cty1427, BOID 630989 | 1 | $3.10 |
![]() | Man, Vibrant Yellow Safety Vest, Bright Light Blue Legs, Red Hard Hat fig-012166, cty1426, BOID 256632 | 1 | $3.04 |
![]() | Woman, Vibrant Yellow Safety Vest, Red Hard Hat fig-012172, cty1425, BOID 1439074 | 1 | $3.26 |
| Total minifigure value: | $26.11 | ||
Compare the value of buying Rocket Launch Center as a complete set versus the total value of all parts individually.
| Value Breakdown | |
| Parts value | $179.79 |
| Minifigure value | $26.11 |
| Total inventory value | $NaN |
BrickLink ![]() | |||||
| Condition | Timespan | Avg price | Items sold | Inventory value | Ratio |
| New | 6 months | ? | ? | $200.75 | ? |
| Used | 6 months | ? | ? | $0.00 | ? |
Brick Owl ![]() | ||||
| Condition | Timespan | Avg price | Inventory value | Ratio |
| New | Current | $180.04 | $280.57 | 1.56 |
| 6 months | ? | $203.51 | ? | |
| 1 year | ? | $202.94 | ? | |
| Used | Current | ? | $212.42 | ? |
| Combined 6 Month Sales Volume (New) | |
| Total items sold | ? |
This LEGO® City Rocket Launch Centre (60351) toy playset is packed with NASA-inspired features, including a huge launch tower and a rocket with room for 2 astronauts and a planet rover. There’s also a detailed observation dome and launch control center, plus a service vehicle, drone and 6 minifigures for fun role play. Combine this set with others from the popular LEGO City Space toy range for even more fun.
Digital building instructions for ages 7 and up
This LEGO toy playset includes a printed building guide and interactive digital building instructions. Available in the free LEGO Building Instructions app for smartphones and tablets, the digital guide comes with awesome zoom and rotate tools that allow kids to visualize each model from all angles as they build.
The creative world of LEGO City
LEGO City Space toys come with feature-rich models inspired by real NASA machines, vehicles and spacecraft, plus inspiring astronaut characters for imaginative, realistic space play.
- LEGO® City space-themed playset – The LEGO City Rocket Launch Centre (60351) playset comes with an array of NASA-inspired toys for imaginative space play
- What’s in the box? – Everything kids need to build a rocket, launch tower, detailed observatory and launch control center, plus a service vehicle, planet rover, drone and 6 minifigures
- Designed for creative play – Kids can operate the launch tower elevator to deliver the astronauts to the boarding gangway and play out scenarios in the toy space observatory and rocket launch center
- A gift for kids and space fans – This LEGO® space toy can be given as a birthday, holiday or any-other-day surprise for budding astronauts aged 7 and up
- Rocket dimensions – When built, the toy space rocket, including boosters, measures over 16.5 in. (42 cm) high and 4 in. (11 cm) wide
- Accessories add to the fun – This toy playset is packed with LEGO® minifigure accessories, including a planet rover with a pretend light-brick laser that shines a red light (battery included)
- Includes an interactive digital building guide – Kids can zoom, rotate and view models from all angles as they build with the LEGO® Building Instructions app, available for smartphones and tablets
- Building kids’ creative skills – LEGO® City Space toys are inspired by real NASA machines, vehicles and spacecraft for open-ended creative play based on real-life events
- Quality in focus – All LEGO® components meet strict industry standards to ensure they are consistent, compatible and fun to build with: it’s been that way since 1958
- Putting safety first – LEGO® bricks and pieces are dropped, heated, crushed, twisted and analyzed to make sure they meet stringent global standards for safety
Find the cheapest offers for set 60351-1 from sellers on secondary marketplaces like Brick Owl and eBay. As an eBay Partner Network Affiliate and Brick Owl Affiliate, I earn from qualifying purchases.
| Item | Price | |
|---|---|---|
BrickLink history of 0 sales with 0 total item quantity. Item condition: New.
No sale history available.








































![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526983.jpg)
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211442.jpg)








![Image of part Minifig Head [Plain] [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/362626.jpg)









![Image of part Steering Wheel Small, 2 x 2 [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6057397.jpg)

















![Image of part Dish 4 x 4 Inverted with Open Stud [Radar]](https://cdn.rebrickable.com/media/parts/elements/6317090.jpg)





























![Image of part Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]](https://cdn.rebrickable.com/media/parts/elements/6185306.jpg)





![Image of part Hair Swept Left Tousled [Plain]](https://cdn.rebrickable.com/media/parts/elements/6145528.jpg)










![Image of part Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge]](https://cdn.rebrickable.com/media/parts/elements/6282140.jpg)




![Image of part Cone 4 x 4 x 2, Axle Hole [Plain]](https://cdn.rebrickable.com/media/parts/elements/394301.jpg)






![Image of part Plant, Leaves 6 x 5 Swordleaf with Clip [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6022936.jpg)







![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg)































![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6254045.jpg)





















![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4567338.jpg)







![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/4210849.jpg)




![Image of part Technic Plate 2 x 4 [3 Holes]](https://cdn.rebrickable.com/media/parts/elements/370901.jpg)

![Image of part Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]](https://cdn.rebrickable.com/media/parts/elements/6273212.jpg)





![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389426.jpg)







![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6344754.jpg)

![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061025.jpg)

![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6034044.jpg)












![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6100030.jpg)

![Image of part Plate Special 2 x 2 with Wheels Holder Wide [Reinforced Underside Type 2]](https://cdn.rebrickable.com/media/parts/photos/0/39767-0-31943271-3507-42af-93e7-30475c17bc2f.jpg)







![Image of part Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]](https://cdn.rebrickable.com/media/parts/elements/6286381.jpg)


















![Image of part Plate Special 2 x 2 with Wheels Holder Wide [Reinforced Underside Type 2]](https://cdn.rebrickable.com/media/parts/photos/71/39767-71-ea64a0f7-0b5e-416a-8e6f-4a23728700c0.jpg)






![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289542.jpg)

























![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370021.jpg)


![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278412.jpg)
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114053.jpg)


![Image of part Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]](https://cdn.rebrickable.com/media/parts/elements/4144024.jpg)

![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4518400.jpg)

![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389924.jpg)


![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611704.jpg)
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611703.jpg)














