Loading...
Price Comparison
No retailers currently stock The Ultimate Bundle in The United States.
Set details
Name: The Ultimate BundleSet number: 5007062-1
Year: 2021
Theme: Super Mario
Number of parts: 0
Number of part types: 1085
Retail price: $299.95
Browse the 1085 part types in set 5007062-1 with individual pricing from BrickLink or Brick Owl.
Value of parts: $358.25
Pricing information known of 1080/1085 parts.
Pricing information known of 1080/1085 parts.
| Part | Color | Quantity | Average price | Total | Value | |
|---|---|---|---|---|---|---|
![]() | Boat Hull Section, Brick 16 x 10 x 3 ![]() | 2 x $2.90 $5.80 | ||||
![]() | Brick 1 x 6 ![]() | 20 x $0.23 $4.56 | ||||
![]() | Technic Beam 1 x 6 Thin ![]() | 16 x $0.23 $3.65 | ||||
![]() | Boat Hull Section, Large Middle 8 x 16 x 2 1/3 with 5 Holes ![]() | 1 x $3.41 $3.41 | ||||
![]() | Brick Sloped 65° 2 x 1 x 2 ![]() | 10 x $0.32 $3.22 | ||||
![]() | Equipment Lantern ![]() | 10 x $0.32 $3.22 | ||||
![]() | Nintendo Figure, Legs and Overalls with Two Front Studs and Reddish Brown Feet, with Internal Prongs for Luigi Suit ![]() | 1 x $3.13 $3.13 | ||||
![]() | Boat Hull Section, Brick 16 x 13 x 2 ![]() | 1 x $2.97 $2.97 | ||||
![]() | Nintendo Figure, Hat, Large, with Luigi Logo Print ![]() | 1 x $2.87 $2.87 | ||||
![]() | Rubber Belt Small [15mm ID] [Round Cross Section] ![]() | 2 x $1.29 $2.58 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 12 x $0.21 $2.58 | ||||
![]() | Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole ![]() | 6 x $0.39 $2.34 | ||||
![]() | Technic Beam 1 x 15 Thick ![]() | 4 x $0.58 $2.31 | ||||
![]() | Technic Tread Sprocket Wheel Large 10 Tooth ![]() | 1 x $2.30 $2.30 | ||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | 5 x $0.43 $2.15 | ||||
![]() | Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder ![]() | 2 x $1.07 $2.15 | ||||
![]() | Bracket 1 x 1 - 1 x 2 ![]() | 12 x $0.17 $2.09 | ||||
![]() | Tile 3 x 3 Curved, Macaroni ![]() | 4 x $0.48 $1.93 | ||||
![]() | Tile Round 3 x 3 ![]() | 3 x $0.56 $1.69 | ||||
![]() | Brick Round, Curved 2 x 2 x 1 1/3, Corner ![]() | 4 x $0.40 $1.61 | ||||
![]() | Hinge Tile 1 x 3 Locking with 1 Finger on Top with Cutout ![]() | 4 x $0.39 $1.56 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 14 x $0.11 $1.50 | ||||
![]() | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout ![]() | 2 x $0.74 $1.48 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 6 x $0.24 $1.45 | ||||
![]() | Brick Round 2 x 2 D. Tube with 45° Elbow and Axle Holes (Crossholes) at Each End [SHORT] ![]() | 4 x $0.36 $1.45 | ||||
![]() | Plate 1 x 2 ![]() | 27 x $0.05 $1.45 | ||||
![]() | Pipe 6 x 6 (Warp Pipe) ![]() | 1 x $1.41 $1.41 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise with No Center Slots ![]() | 52 x $0.03 $1.40 | ||||
![]() | Plate 4 x 4 ![]() | 4 x $0.34 $1.34 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 20 x $0.07 $1.34 | ||||
![]() | Brick Special 1 x 2 with Masonry Brick Profile ![]() | 12 x $0.11 $1.29 | ||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | 8 x $0.16 $1.29 | ||||
![]() | Hose Rigid 3mm D. 16L / 12.8cm ![]() | 1 x $1.28 $1.28 | ||||
![]() | Plate 8 x 16 ![]() | 1 x $1.28 $1.28 | ||||
![]() | Window 1 x 2 x 3 Train ![]() | 2 x $0.62 $1.24 | ||||
![]() | Tile Round 2 x 2 with Red Bowser Skull Print ![]() | 7 x $0.17 $1.22 | ||||
![]() | Brick Curved 2 x 4 x 1 1/3 ![]() | 2 x $0.60 $1.21 | ||||
![]() | Brick 1 x 2 ![]() | 18 x $0.07 $1.21 | ||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | 4 x $0.30 $1.18 | ||||
![]() | Window 1 x 4 x 1 2/3 with Spoked Rounded Top ![]() | 1 x $1.13 $1.13 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] ![]() | 14 x $0.08 $1.13 | ||||
![]() | Technic Beam 1 x 11 Thick ![]() | 6 x $0.19 $1.13 | ||||
![]() | Plate Special 4 x 4 Splat Gear, 10 Teeth ![]() | 4 x $0.27 $1.07 | ||||
![]() | Tile Special 2 x 2 Inverted with Kamek and Barcode Print (Sticker) ![]() | 1 x $1.07 $1.07 | ||||
![]() | Brick 2 x 4 ![]() | 5 x $0.21 $1.07 | ||||
![]() | Technic Beam 1 x 9 Thick ![]() | 3 x $0.35 $1.05 | ||||
![]() | Tile 1 x 1 Heart ![]() | 13 x $0.08 $1.05 | ||||
![]() | Brick Curved Inverted 2 x 1 ![]() | 6 x $0.17 $1.05 | ||||
![]() | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side ![]() | 6 x $0.17 $1.05 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 7 x $0.15 $1.03 | ||||
![]() | Brick 1 x 4 ![]() | 5 x $0.20 $1.01 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 5 x $0.20 $1.01 | ||||
![]() | Support 2 x 2 x 13 with 5 Pin Holes ![]() | 2 x $0.50 $0.99 | ||||
![]() | Arm, Long, with Technic Pin ![]() | 2 x $0.50 $0.99 | ||||
![]() | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole ![]() | 2 x $0.50 $0.99 | ||||
![]() | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] ![]() | 4 x $0.24 $0.97 | ||||
![]() | Wedge Plate 4 x 2 Left ![]() | 4 x $0.24 $0.97 | ||||
![]() | Brick Curved 2 x 2, Two Top Studs with Bullet Bill Face Print ![]() | 1 x $0.97 $0.97 | ||||
![]() | Brick Curved 4 x 1 Double, No Studs ![]() | 8 x $0.12 $0.97 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 6 x $0.16 $0.97 | ||||
![]() | Wedge Plate 4 x 2 Right ![]() | 4 x $0.23 $0.91 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Left ![]() | 4 x $0.23 $0.91 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Right ![]() | 4 x $0.23 $0.91 | ||||
![]() | Tile Special Round 2 x 2 with Hole ![]() | 6 x $0.15 $0.89 | ||||
![]() | Plate Special 3 x 5 Cloud with 3 Center Studs ![]() | 5 x $0.17 $0.87 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 13 x $0.07 $0.87 | ||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | 16 x $0.05 $0.86 | ||||
![]() | Tile 2 x 2 Curved, Macaroni ![]() | 8 x $0.11 $0.86 | ||||
![]() | Tile 2 x 2 Curved, Macaroni ![]() | 8 x $0.11 $0.86 | ||||
![]() | Tile Round 1 x 1 with White/Sand Green Lines / Mirror Print ![]() | 3 x $0.28 $0.85 | ||||
![]() | Brick Round 2 x 2, Pin Holes with Gold Lapels, Dark Blue Trim, and White Undershirt Print ![]() | 1 x $0.85 $0.85 | ||||
![]() | Technic Brick 1 x 16 [15 Pin Holes] ![]() | 1 x $0.82 $0.82 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 4 x $0.20 $0.81 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 5 x $0.16 $0.81 | ||||
![]() | Brick 1 x 1 ![]() | 10 x $0.08 $0.81 | ||||
![]() | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] ![]() | 6 x $0.13 $0.81 | ||||
![]() | Plate Special 1 x 2 with Pin Hole on Top ![]() | 4 x $0.20 $0.81 | ||||
![]() | Brick Special Cube with 2 x 2 Studs on Top, Blue Circles Print ![]() | 1 x $0.79 $0.79 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 2 x $0.39 $0.78 | ||||
![]() | Tile Round 3 x 3 with Face, Sharp Teeth, Red Eyes Print ![]() | 1 x $0.78 $0.78 | ||||
![]() | Technic Beam 1 x 2 Thick ![]() | 2 x $0.38 $0.75 | ||||
![]() | Technic Beam 1 x 15 Thick ![]() | 1 x $0.75 $0.75 | ||||
![]() | Plate 2 x 8 ![]() | 4 x $0.19 $0.75 | ||||
![]() | Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] ![]() | 7 x $0.11 $0.75 | ||||
![]() | Brick 2 x 2 Corner ![]() | 4 x $0.19 $0.75 | ||||
![]() | Brick 1 x 4 ![]() | 4 x $0.19 $0.75 | ||||
![]() | Tile Special Round 2 x 2 with Hole ![]() | 8 x $0.09 $0.75 | ||||
![]() | Plate 1 x 6 ![]() | 8 x $0.09 $0.75 | ||||
![]() | Brick 1 x 4 ![]() | 4 x $0.19 $0.75 | ||||
![]() | Brick Curved Inverted 2 x 2 x 2/3 ![]() | 5 x $0.15 $0.74 | ||||
![]() | Plate 1 x 2 ![]() | 11 x $0.07 $0.74 | ||||
![]() | Brick Sloped 30° 1 x 2 x 2/3 ![]() | 11 x $0.07 $0.74 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 11 x $0.07 $0.74 | ||||
![]() | Plate 2 x 10 ![]() | 5 x $0.15 $0.74 | ||||
![]() | Plate Special 6 x 6 Splat Gear, 14 Teeth ![]() | 2 x $0.36 $0.72 | ||||
![]() | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs ![]() | 18 x $0.04 $0.72 | ||||
![]() | Plate 1 x 6 ![]() | 6 x $0.12 $0.72 | ||||
![]() | Curled Decorative Ornament / Plant Vine with Bar ![]() | 2 x $0.35 $0.70 | ||||
![]() | Technic Beam 1 x 9 Thick ![]() | 2 x $0.35 $0.70 | ||||
![]() | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] ![]() | 4 x $0.17 $0.70 | ||||
![]() | Brick Sloped 18° 4 x 1 ![]() | 4 x $0.17 $0.70 | ||||
![]() | Brick Curved 3 x 1 No Studs ![]() | 4 x $0.17 $0.70 | ||||
![]() | Feet, 2 x 2 x 2/3 with 4 Studs on Top ![]() | 1 x $0.67 $0.67 | ||||
![]() | Brick Curved 1 x 2 x 1 No Studs with Medium Nougat Lines (Nostrils) Print ![]() | 1 x $0.67 $0.67 | ||||
![]() | Brick 1 x 8 ![]() | 2 x $0.34 $0.67 | ||||
![]() | Tile 2 x 6 ![]() | 2 x $0.34 $0.67 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 5 x $0.13 $0.67 | ||||
![]() | Brick Curved 4 x 1 Double, No Studs ![]() | 5 x $0.13 $0.67 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 5 x $0.13 $0.67 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 5 x $0.13 $0.67 | ||||
![]() | Brick Curved 2 x 2 x 2/3 with Animal, Teeth, Medium Azure Goggles Print ![]() | 1 x $0.64 $0.64 | ||||
![]() | Tile 1 x 1 with Groove ![]() | 8 x $0.08 $0.64 | ||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | 6 x $0.11 $0.64 | ||||
![]() | Plate 1 x 2 ![]() | 6 x $0.11 $0.64 | ||||
![]() | Brick 2 x 4 ![]() | 3 x $0.21 $0.64 | ||||
![]() | Brick 1 x 1 ![]() | 6 x $0.11 $0.64 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 6 x $0.11 $0.64 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 8 x $0.08 $0.64 | ||||
![]() | Plate 1 x 10 ![]() | 4 x $0.16 $0.64 | ||||
![]() | Brick 2 x 4 ![]() | 4 x $0.16 $0.64 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 6 x $0.11 $0.64 | ||||
![]() | Technic Brick 1 x 1 with Axle Hole ![]() | 4 x $0.16 $0.64 | ||||
![]() | Plate 2 x 3 with 1 x 1 Cutout ![]() | 4 x $0.16 $0.64 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 8 x $0.08 $0.64 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 4 x $0.16 $0.64 | ||||
![]() | Pipe 6 x 6 (Warp Pipe) ![]() | 1 x $0.63 $0.63 | ||||
![]() | Arm, Long, with Technic Pin ![]() | 2 x $0.31 $0.62 | ||||
![]() | Tile 2 x 6 ![]() | 2 x $0.31 $0.62 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 3 x $0.20 $0.60 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with 2 x 2 Opening ![]() | 3 x $0.20 $0.60 | ||||
![]() | Tile Round 1 x 1 Half Circle ![]() | 9 x $0.07 $0.60 | ||||
![]() | Plate 1 x 2 ![]() | 9 x $0.07 $0.60 | ||||
![]() | Plate 1 x 2 ![]() | 9 x $0.07 $0.60 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 9 x $0.07 $0.60 | ||||
![]() | Technic Beam 1 x 7 Thick ![]() | 5 x $0.12 $0.60 | ||||
![]() | Tile Round 2 x 4 ![]() | 2 x $0.30 $0.59 | ||||
![]() | Brick Arch 1 x 3 x 3 [Gothic] ![]() | 2 x $0.30 $0.59 | ||||
![]() | Brick Curved 2 x 2 x 2/3 with Black Mouth, White Eyes Print ![]() | 2 x $0.30 $0.59 | ||||
![]() | Plate 8 x 8 ![]() | 1 x $0.59 $0.59 | ||||
![]() | Pipe 6 x 6 (Warp Pipe) ![]() | 1 x $0.59 $0.59 | ||||
![]() | Brick 2 x 4 ![]() | 4 x $0.15 $0.59 | ||||
![]() | Plate 1 x 1 ![]() | 11 x $0.05 $0.59 | ||||
![]() | Technic Pin Connector Round [Slotted] ![]() | 4 x $0.15 $0.59 | ||||
![]() | Tile Special 1 x 1 with Clip with Rounded Edges ![]() | 4 x $0.15 $0.59 | ||||
![]() | Brick Curved Inverted 2 x 2 x 2/3 ![]() | 4 x $0.15 $0.59 | ||||
![]() | Brick Curved 4 x 1 Double, No Studs ![]() | 4 x $0.15 $0.59 | ||||
![]() | Technic Plate 2 x 8 [7 Holes] ![]() | 4 x $0.15 $0.59 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.28 $0.56 | ||||
![]() | Technic Pin Connector Round [Slotted] ![]() | 2 x $0.28 $0.56 | ||||
![]() | Cone Half 2 x 4 x 3 ![]() | 2 x $0.28 $0.56 | ||||
![]() | Arm, Short, with Technic Pin ![]() | 2 x $0.28 $0.56 | ||||
![]() | Plate 2 x 4 ![]() | 6 x $0.09 $0.56 | ||||
![]() | Hinge Plate 3 x 4 Locking Dual 2 Finger, 7 Teeth ![]() | 6 x $0.09 $0.56 | ||||
![]() | Plate 1 x 2 ![]() | 14 x $0.04 $0.56 | ||||
![]() | Plate Special 1 x 2 with Clip Horizontal on Side ![]() | 6 x $0.09 $0.56 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Left ![]() | 3 x $0.19 $0.56 | ||||
![]() | Plate 2 x 14 ![]() | 3 x $0.19 $0.56 | ||||
![]() | Bar 1L / Stem with 3 Sprouts/Prongs ![]() | 2 x $0.27 $0.54 | ||||
![]() | Brick 1 x 2 x 3 with Bottom Stud Holder ![]() | 4 x $0.13 $0.54 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 5 x $0.11 $0.54 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 8 x $0.07 $0.54 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 10 x $0.05 $0.54 | ||||
![]() | Brick 2 x 2 ![]() | 5 x $0.11 $0.54 | ||||
![]() | Brick Curved 2 x 1 No Studs [1/2 Bow] ![]() | 8 x $0.07 $0.54 | ||||
![]() | Brick Arch 1 x 3 ![]() | 4 x $0.13 $0.54 | ||||
![]() | Plate 1 x 1 ![]() | 10 x $0.05 $0.54 | ||||
![]() | Plate 2 x 3 ![]() | 8 x $0.07 $0.54 | ||||
![]() | Brick Wedged, Sloped 4 x 4 with Diamond Spikes with White Underside Pattern ![]() | 1 x $0.52 $0.52 | ||||
![]() | Tile 2 x 2 with Ship Mast, Crows Nest and Barcode Print (Sticker) ![]() | 1 x $0.52 $0.52 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Right ![]() | 3 x $0.17 $0.52 | ||||
![]() | Plate 1 x 10 ![]() | 3 x $0.17 $0.52 | ||||
![]() | Tile 2 x 2 with Grrrol and Barcode Print (Sticker) ![]() | 2 x $0.26 $0.51 | ||||
![]() | Feet, 2 x 2 x 2/3 with 4 Studs on Top ![]() | 1 x $0.51 $0.51 | ||||
![]() | Feet, 2 x 2 x 2/3 with 4 Studs on Top ![]() | 1 x $0.50 $0.50 | ||||
![]() | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole ![]() | 1 x $0.50 $0.50 | ||||
![]() | Technic Beam 1 x 11 Thick ![]() | 1 x $0.50 $0.50 | ||||
![]() | Brick 2 x 2 with Face, Surprised Open Mouth Print ![]() | 1 x $0.50 $0.50 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 2 x $0.24 $0.48 | ||||
![]() | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] ![]() | 2 x $0.24 $0.48 | ||||
![]() | Plate Round Corners 8 x 8 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.24 $0.48 | ||||
![]() | Technic Pin Connector Round [Slotted] ![]() | 2 x $0.24 $0.48 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 2 x $0.24 $0.48 | ||||
![]() | Bracket 1 x 1 - 1 x 2 Inverted ![]() | 2 x $0.24 $0.48 | ||||
![]() | Plate 6 x 8 ![]() | 1 x $0.48 $0.48 | ||||
![]() | Brick 1 x 2 ![]() | 6 x $0.08 $0.48 | ||||
![]() | Plate 1 x 1 ![]() | 9 x $0.05 $0.48 | ||||
![]() | Plate 1 x 3 ![]() | 6 x $0.08 $0.48 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise with No Center Slots ![]() | 18 x $0.03 $0.48 | ||||
![]() | Technic Pin Connector Hub with 1 Axle ![]() | 4 x $0.12 $0.48 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 9 x $0.05 $0.48 | ||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | 4 x $0.12 $0.48 | ||||
![]() | Brick Curved, 3 x 1 with 1/3 Inverted Cutout ![]() | 4 x $0.12 $0.48 | ||||
![]() | Plate 1 x 1 ![]() | 9 x $0.05 $0.48 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 9 x $0.05 $0.48 | ||||
![]() | Plate Round Half 3 x 6 with 1 x 2 Cutout ![]() | 4 x $0.12 $0.48 | ||||
![]() | Plate 1 x 1 ![]() | 9 x $0.05 $0.48 | ||||
![]() | Wedge Plate 2 x 2 Cut Corner ![]() | 6 x $0.08 $0.48 | ||||
![]() | Plate 1 x 4 ![]() | 6 x $0.08 $0.48 | ||||
![]() | Brick Sloped Inverted 45° 2 x 1 ![]() | 6 x $0.08 $0.48 | ||||
![]() | Plate 2 x 6 ![]() | 4 x $0.12 $0.48 | ||||
![]() | Brick 1 x 2 ![]() | 7 x $0.07 $0.47 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 7 x $0.07 $0.47 | ||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | 7 x $0.07 $0.47 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 7 x $0.07 $0.47 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 5 x $0.09 $0.47 | ||||
![]() | Plate 1 x 4 ![]() | 5 x $0.09 $0.47 | ||||
![]() | Plate 1 x 6 ![]() | 5 x $0.09 $0.47 | ||||
![]() | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs ![]() | 2 x $0.23 $0.46 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 2 x $0.23 $0.46 | ||||
![]() | Technic Axle 2 Notched ![]() | 17 x $0.03 $0.46 | ||||
![]() | Barrel 2 x 2 x 2 ![]() | 1 x $0.44 $0.44 | ||||
![]() | Brick Sloped Inverted 45° 6 x 2 Double with 2 x 4 Recessed ![]() | 1 x $0.44 $0.44 | ||||
![]() | Brick 2 x 4 ![]() | 3 x $0.15 $0.44 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 3 x $0.15 $0.44 | ||||
![]() | Plate 2 x 6 ![]() | 3 x $0.15 $0.44 | ||||
![]() | Brick 1 x 2 ![]() | 3 x $0.15 $0.44 | ||||
![]() | Tile 2 x 2 with Boom Boom and Barcode Print (Sticker) ![]() | 1 x $0.43 $0.43 | ||||
![]() | Plate 4 x 12 ![]() | 1 x $0.43 $0.43 | ||||
![]() | Plate 4 x 12 ![]() | 1 x $0.43 $0.43 | ||||
![]() | Brick Special 1 x 2 with Masonry Brick Profile ![]() | 4 x $0.11 $0.43 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 2 x $0.21 $0.43 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Curved 1 x 2 x 1 No Studs ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides ![]() | 2 x $0.21 $0.43 | ||||
![]() | Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout ![]() | 2 x $0.21 $0.43 | ||||
![]() | Tile 2 x 2 Curved, Macaroni ![]() | 4 x $0.11 $0.43 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick 1 x 3 ![]() | 2 x $0.21 $0.43 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 4 x $0.11 $0.43 | ||||
![]() | Tile 1 x 8 with Groove ![]() | 2 x $0.21 $0.43 | ||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides ![]() | 2 x $0.21 $0.43 | ||||
![]() | Plate Round Corners Double 4 x 8 with 2 x 2 Cutout and 2 x 8 Raised Studs, Reduces Nubs ![]() | 4 x $0.11 $0.43 | ||||
![]() | Plate 2 x 4 ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Round 2 x 2 Dome Top, Hollow Stud ![]() | 4 x $0.11 $0.43 | ||||
![]() | Plate 2 x 6 ![]() | 4 x $0.11 $0.43 | ||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | 4 x $0.11 $0.43 | ||||
![]() | Brick 1 x 6 ![]() | 2 x $0.21 $0.43 | ||||
![]() | Plate 2 x 4 ![]() | 8 x $0.05 $0.43 | ||||
![]() | Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version] ![]() | 4 x $0.11 $0.43 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.11 $0.43 | ||||
![]() | Support Round 1 x 1 x 6 Solid Pillar ![]() | 2 x $0.21 $0.43 | ||||
![]() | Brick 1 x 16 ![]() | 1 x $0.42 $0.42 | ||||
![]() | Technic Gear 20 Tooth Bevel ![]() | 1 x $0.42 $0.42 | ||||
![]() | Bar 1 x 12 with 1 x 2 Plate End with Solid Studs and 1 x 1 Round Plate End ![]() | 1 x $0.40 $0.40 | ||||
![]() | Tile 2 x 2 with Bullet Bill and Barcode Print (Sticker) ![]() | 1 x $0.40 $0.40 | ||||
![]() | Tile 2 x 2 with Goomba Face with Low Furrowed Brow, Open Mouth Print ![]() | 1 x $0.40 $0.40 | ||||
![]() | Brick 1 x 2 with White Question Mark '?' Print ![]() | 2 x $0.20 $0.40 | ||||
![]() | Plate 2 x 8 ![]() | 3 x $0.13 $0.40 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 6 x $0.07 $0.40 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 10 x $0.04 $0.40 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.20 $0.40 | ||||
![]() | Brick 1 x 2 with Star with Eyes Print ![]() | 2 x $0.20 $0.40 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 3 x $0.13 $0.40 | ||||
![]() | Tile 2 x 3 ![]() | 2 x $0.20 $0.40 | ||||
![]() | Plate 2 x 14 ![]() | 2 x $0.20 $0.40 | ||||
![]() | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] ![]() | 10 x $0.04 $0.40 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 6 x $0.07 $0.40 | ||||
![]() | Plate 2 x 6 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Brick 1 x 1 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Plate 2 x 4 ![]() | 5 x $0.08 $0.40 | ||||
![]() | Plate 1 x 2 ![]() | 6 x $0.07 $0.40 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 6 x $0.07 $0.40 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with 2 x 2 Opening ![]() | 2 x $0.20 $0.40 | ||||
![]() | Tile 2 x 2 with 'Start' and Pipe with Squared Border, and Barcode Print (Sticker) ![]() | 1 x $0.39 $0.39 | ||||
![]() | Tile 2 x 2 with 'Start', Cannon, and Barcode Print (Sticker) ![]() | 1 x $0.39 $0.39 | ||||
![]() | Brick 1 x 12 ![]() | 1 x $0.38 $0.38 | ||||
![]() | Brick Special 1 x 2 with Studs on 2 Sides ![]() | 2 x $0.19 $0.38 | ||||
![]() | Plate Special 2 x 2 with Only 2 Studs ![]() | 4 x $0.09 $0.38 | ||||
![]() | Arm, Long, with Technic Pin ![]() | 2 x $0.19 $0.38 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 7 x $0.05 $0.38 | ||||
![]() | Plate 2 x 4 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Plant, Plate 1 x 1 Round with 3 Leaves ![]() | 4 x $0.09 $0.38 | ||||
![]() | Bracket 1 x 1 - 1 x 1 ![]() | 2 x $0.19 $0.38 | ||||
![]() | Plate 1 x 2 ![]() | 7 x $0.05 $0.38 | ||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick 1 x 1 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick 1 x 2 with White 'POW' Print ![]() | 2 x $0.19 $0.38 | ||||
![]() | Tile Round 1 x 1 ![]() | 7 x $0.05 $0.38 | ||||
![]() | Plate 1 x 2 ![]() | 7 x $0.05 $0.38 | ||||
![]() | Arm, Long, with Technic Pin ![]() | 2 x $0.19 $0.38 | ||||
![]() | Plate 1 x 4 ![]() | 7 x $0.05 $0.38 | ||||
![]() | Brick Curved, 3 x 1 with 1/3 Inverted Cutout ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Special 1 x 1 with Headlight ![]() | 2 x $0.19 $0.38 | ||||
![]() | Plate 1 x 3 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Bracket 1 x 1 - 1 x 1 ![]() | 4 x $0.09 $0.38 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.09 $0.38 | ||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Sloped 45° 2 x 1 with 2/3 Inverted Cutout and No Stud ![]() | 4 x $0.09 $0.38 | ||||
![]() | Brick Curved 1 x 2 x 1 No Studs with Mouth, White Fangs Print ![]() | 1 x $0.36 $0.36 | ||||
![]() | Plate Special 6 x 6 Splat Gear, 14 Teeth ![]() | 1 x $0.36 $0.36 | ||||
![]() | Wedge Plate 3 x 2 Right ![]() | 1 x $0.36 $0.36 | ||||
![]() | Brick Sloped 33° 3 x 4 ![]() | 1 x $0.36 $0.36 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs and Seesaw and Barcode Print (Sticker) ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate 2 x 8 ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | 9 x $0.04 $0.36 | ||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | 3 x $0.12 $0.36 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 9 x $0.04 $0.36 | ||||
![]() | Plate Special 1 x 3 with 2 Studs (Jumper) with 2 White Squares on Side Print ![]() | 1 x $0.35 $0.35 | ||||
![]() | Wedge Plate 3 x 2 Left ![]() | 1 x $0.35 $0.35 | ||||
![]() | Tile 2 x 6 ![]() | 1 x $0.35 $0.35 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 2 x $0.17 $0.35 | ||||
![]() | Plate Special 2 x 2 with Pin on Bottom ![]() | 2 x $0.17 $0.35 | ||||
![]() | Brick 2 x 4 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Plate 1 x 8 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | 2 x $0.17 $0.35 | ||||
![]() | Plate 1 x 8 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] ![]() | 2 x $0.17 $0.35 | ||||
![]() | Brick 2 x 4 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.17 $0.35 | ||||
![]() | Tile 2 x 2 with Yellow and Black Eyes Print (Bone Goomba Face) ![]() | 1 x $0.34 $0.34 | ||||
![]() | Feet, 2 x 2 x 2/3, Front Left Foot Forward with 4 Studs on Top ![]() | 1 x $0.34 $0.34 | ||||
![]() | Feet, 2 x 2 x 2/3, Front Left Foot Forward with 4 Studs on Top ![]() | 1 x $0.34 $0.34 | ||||
![]() | Plate 1 x 1 ![]() | 5 x $0.07 $0.34 | ||||
![]() | Plate 1 x 2 ![]() | 5 x $0.07 $0.34 | ||||
![]() | Plate 2 x 2 ![]() | 5 x $0.07 $0.34 | ||||
![]() | Plate 2 x 2 Corner ![]() | 5 x $0.07 $0.34 | ||||
![]() | Tile 2 x 2 with Yoshi Egg and Barcode Print (Sticker) ![]() | 1 x $0.32 $0.32 | ||||
![]() | Tile 2 x 2 with Sumo Bro and Barcode Print (Sticker) ![]() | 1 x $0.32 $0.32 | ||||
![]() | Plate 4 x 8 ![]() | 1 x $0.32 $0.32 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick Wedged 2 x 2 Facet ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick 1 x 6 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Gear 8 Tooth No Friction ![]() | 2 x $0.16 $0.32 | ||||
![]() | Plate 2 x 4 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick 1 x 1 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 4 x $0.08 $0.32 | ||||
![]() | Technic Pin Long without Friction Ridges, with Anti-Roll Notch ![]() | 8 x $0.04 $0.32 | ||||
![]() | Plate 1 x 2 ![]() | 12 x $0.03 $0.32 | ||||
![]() | Plate Round Half 4 x 8 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Brick 1 x 1 with Axle Hole ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 8 x $0.04 $0.32 | ||||
![]() | Plate 2 x 12 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick 1 x 2 ![]() | 8 x $0.04 $0.32 | ||||
![]() | Tile Round 1 x 1 Half Circle ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick Curved 1 x 3 x 2 Inverted [Inside Bow] ![]() | 2 x $0.16 $0.32 | ||||
![]() | Cone 4 x 4 x 2, Axle Hole [Plain] ![]() | 2 x $0.16 $0.32 | ||||
![]() | Technic Beam 1 x 2 Thick ![]() | 2 x $0.16 $0.32 | ||||
![]() | Barrel Half Large with Axle Hole ![]() | 2 x $0.16 $0.32 | ||||
![]() | Plate 4 x 4 ![]() | 2 x $0.16 $0.32 | ||||
![]() | Plate 1 x 3 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs ![]() | 2 x $0.16 $0.32 | ||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | 6 x $0.05 $0.32 | ||||
![]() | Plate 1 x 6 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 6 x $0.05 $0.32 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs and 'X' and Barcode Print (Sticker) ![]() | 2 x $0.16 $0.32 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 8 x $0.04 $0.32 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 3 x $0.11 $0.32 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise with No Center Slots ![]() | 12 x $0.03 $0.32 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 12 x $0.03 $0.32 | ||||
![]() | Plate 1 x 3 ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Sloped Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection ![]() | 4 x $0.08 $0.32 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 8 x $0.04 $0.32 | ||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | 4 x $0.08 $0.32 | ||||
![]() | Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] ![]() | 6 x $0.05 $0.32 | ||||
![]() | Plate Special 1 x 2 with Pin Hole Underneath ![]() | 4 x $0.08 $0.32 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.08 $0.32 | ||||
![]() | Plate Special 2 x 4 with Pins ![]() | 1 x $0.31 $0.31 | ||||
![]() | Tile 2 x 2 with 'Start', Three Coins, and Barcode Print (Sticker) ![]() | 1 x $0.31 $0.31 | ||||
![]() | Brick 1 x 8 ![]() | 1 x $0.31 $0.31 | ||||
![]() | Tile 2 x 2 with 'GOAL', Bowser, and Barcode Print (Sticker) ![]() | 1 x $0.30 $0.30 | ||||
![]() | Technic Axle 10 ![]() | 1 x $0.30 $0.30 | ||||
![]() | Tile Special 2 x 2 Inverted with Bowser and Barcode Print (Sticker) ![]() | 1 x $0.30 $0.30 | ||||
![]() | Tile Round 2 x 2 with Red Circles Print ![]() | 1 x $0.30 $0.30 | ||||
![]() | Tile 2 x 2 with Broom and Barcode Print (Sticker) ![]() | 1 x $0.30 $0.30 | ||||
![]() | Tile Special 2 x 2 Inverted ![]() | 1 x $0.30 $0.30 | ||||
![]() | Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides ![]() | 2 x $0.15 $0.30 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.15 $0.30 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Tile Special Round 2 x 2 with Hole ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Beam 3 x 5 L-Shape Thick ![]() | 2 x $0.15 $0.30 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 11 x $0.03 $0.30 | ||||
![]() | Bracket 1 x 1 - 1 x 1 Inverted ![]() | 2 x $0.15 $0.30 | ||||
![]() | Tile 4 x 4 Curved, Macaroni ![]() | 2 x $0.15 $0.30 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick Curved Inverted 2 x 2 x 2/3 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Wedge Plate 6 x 6 Cut Corner ![]() | 2 x $0.15 $0.30 | ||||
![]() | Tile 1 x 3 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 2 x $0.15 $0.30 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.15 $0.30 | ||||
![]() | Tile 2 x 2 with Clock in Rounded Border and Barcode Print (Sticker) ![]() | 1 x $0.28 $0.28 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.28 $0.28 | ||||
![]() | Tile 2 x 2 with 'POW' and Barcode Print (Sticker) ![]() | 1 x $0.28 $0.28 | ||||
![]() | Tile Round 1 x 1 Half Circle ![]() | 3 x $0.09 $0.28 | ||||
![]() | Tile Round 1 x 1 ![]() | 7 x $0.04 $0.28 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.09 $0.28 | ||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | 3 x $0.09 $0.28 | ||||
![]() | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium ![]() | 3 x $0.09 $0.28 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 3 x $0.09 $0.28 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 7 x $0.04 $0.28 | ||||
![]() | Plate Special 4 x 4 Splat Gear, 10 Teeth ![]() | 1 x $0.27 $0.27 | ||||
![]() | Technic Beam 1 x 13 Thick ![]() | 1 x $0.27 $0.27 | ||||
![]() | Tile Special 2 x 3 with 2 Clips with Bowser Head Print ![]() | 1 x $0.27 $0.27 | ||||
![]() | Brick Curved 2 x 3 ![]() | 1 x $0.27 $0.27 | ||||
![]() | Tile 2 x 2 with Star and Barcode Print (Sticker) ![]() | 1 x $0.27 $0.27 | ||||
![]() | Brick 1 x 6 ![]() | 1 x $0.27 $0.27 | ||||
![]() | Fence Spindled 1 x 4 x 2 [4 Top Studs] ![]() | 1 x $0.27 $0.27 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 2 x 2 Corner ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 2 x 2 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Technic Gear 8 Tooth [Reinforced] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 1 x 1 ![]() | 5 x $0.05 $0.27 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Technic Beam 2 x 4 L-Shape Thick ![]() | 4 x $0.07 $0.27 | ||||
![]() | Tile 1 x 1 with Groove ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick 1 x 2 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick Special 1 x 1 with Studs on 2 Adjacent Sides ![]() | 2 x $0.13 $0.27 | ||||
![]() | Brick Special 1 x 2 with Pin - Bottom Stud Holder ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick Arch 1 x 4 x 2 ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Brick 1 x 1 with Axle Hole ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick Curved Inverted 2 x 1 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick Curved 4 x 1 Double, No Studs ![]() | 2 x $0.13 $0.27 | ||||
![]() | Bar 3L ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 2 x 2 Corner ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 4 x $0.07 $0.27 | ||||
![]() | Plate 2 x 3 ![]() | 5 x $0.05 $0.27 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 10 x $0.03 $0.27 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 2 x $0.13 $0.27 | ||||
![]() | Brick Sloped Inverted 45° 3 x 1 Double with 2 Blocked Open Studs ![]() | 2 x $0.13 $0.27 | ||||
![]() | Brick 1 x 1 ![]() | 4 x $0.07 $0.27 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 4 x $0.07 $0.27 | ||||
![]() | Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] ![]() | 5 x $0.05 $0.27 | ||||
![]() | Tile 4 x 4 Curved, Macaroni ![]() | 2 x $0.13 $0.27 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Axle Connector Double Flexible [Rubber] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Brick Sloped 45° 2 x 1 with 2/3 Inverted Cutout and No Stud ![]() | 4 x $0.07 $0.27 | ||||
![]() | Turntable 4 x 4 Square Base, Locking ![]() | 5 x $0.05 $0.27 | ||||
![]() | Tile 1 x 8 with Groove ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.13 $0.27 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 2 x $0.13 $0.27 | ||||
![]() | Plate 2 x 3 with 1 x 1 Cutout ![]() | 2 x $0.13 $0.27 | ||||
![]() | Tile Round 1 x 1 ![]() | 5 x $0.05 $0.27 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 4 x $0.07 $0.27 | ||||
![]() | Window 1 x 2 x 2 Flat Front ![]() | 2 x $0.13 $0.27 | ||||
![]() | Tile 2 x 2 with '?' and Barcode Print (Sticker) ![]() | 1 x $0.26 $0.26 | ||||
![]() | Tile 2 x 3 ![]() | 1 x $0.26 $0.26 | ||||
![]() | Technic Plate 2 x 8 [7 Holes] ![]() | 1 x $0.26 $0.26 | ||||
![]() | Tile 2 x 2 with '?' and Barcode Print (Sticker) ![]() | 1 x $0.26 $0.26 | ||||
![]() | Tile 2 x 2 with Stopwatch, Coins Print ![]() | 1 x $0.26 $0.26 | ||||
![]() | Tile Round 2 x 4 with Face, Big Open Mouth, Tongue Print ![]() | 1 x $0.24 $0.24 | ||||
![]() | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] ![]() | 1 x $0.24 $0.24 | ||||
![]() | Tile 2 x 2 with Reznor and Barcode Print (Sticker) ![]() | 1 x $0.24 $0.24 | ||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate 1 x 8 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] ![]() | 2 x $0.12 $0.24 | ||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | 3 x $0.08 $0.24 | ||||
![]() | Brick 2 x 2 Corner ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate 1 x 10 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 6 x $0.04 $0.24 | ||||
![]() | Hinge Plate 1 x 4 Locking Dual 1 Finger ![]() | 6 x $0.04 $0.24 | ||||
![]() | Brick Curved 3 x 1 No Studs ![]() | 2 x $0.12 $0.24 | ||||
![]() | Technic Bush ![]() | 6 x $0.04 $0.24 | ||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Special 2 x 2 with Only 2 Studs ![]() | 3 x $0.08 $0.24 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with 2 x 2 Opening ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Round Half 4 x 8 ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.08 $0.24 | ||||
![]() | Plate 1 x 1 ![]() | 6 x $0.04 $0.24 | ||||
![]() | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) ![]() | 2 x $0.12 $0.24 | ||||
![]() | Tile 4 x 4 Curved, Macaroni ![]() | 2 x $0.12 $0.24 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 2 x $0.12 $0.24 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 2 x $0.12 $0.24 | ||||
![]() | Plate Round 6 x 6 with Hole ![]() | 3 x $0.08 $0.24 | ||||
![]() | Tile Round 2 x 4 with Face, White Fangs Print ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.23 $0.23 | ||||
![]() | Tile 2 x 2 with Goomba and Barcode Print (Sticker) ![]() | 1 x $0.23 $0.23 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 1 x $0.23 $0.23 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick Round 2 x 2 Special with Spikes ![]() | 1 x $0.21 $0.21 | ||||
![]() | Plate 2 x 8 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Feet, 2 x 2 x 2/3, Front Left Foot Forward with 4 Studs on Top ![]() | 1 x $0.21 $0.21 | ||||
![]() | Brick 1 x 3 with White Eyes, Angry Eyebrows Print ![]() | 1 x $0.21 $0.21 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 2 x $0.11 $0.21 | ||||
![]() | Feet, 2 x 3 x 2/3 with 6 Studs on Top ![]() | 1 x $0.21 $0.21 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Tile 2 x 3 with Dark Tan Lines Print ![]() | 1 x $0.21 $0.21 | ||||
![]() | Brick Round 2 x 2 Dome Top, Hollow Stud ![]() | 1 x $0.21 $0.21 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick 2 x 2 with Clock Timer on Two Sides Print ![]() | 1 x $0.21 $0.21 | ||||
![]() | Brick Special 1 x 2 with Masonry Brick Profile ![]() | 2 x $0.11 $0.21 | ||||
![]() | Technic Beam 3 x 5 L-Shape Thick ![]() | 2 x $0.11 $0.21 | ||||
![]() | Technic Beam 1 x 3 Thin ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate Round Corners Double 4 x 8 with 2 x 2 Cutout and 2 x 8 Raised Studs, Reduces Nubs ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Bar 2L with Towball ![]() | 2 x $0.11 $0.21 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick 2 x 2 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate Special 1 x 4 with Towball ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | 4 x $0.05 $0.21 | ||||
![]() | Plate Round Corners Double 4 x 8 with 2 x 2 Cutout and 2 x 8 Raised Studs, Reduces Nubs ![]() | 2 x $0.11 $0.21 | ||||
![]() | Tile Special 2 x 2 Inverted ![]() | 1 x $0.21 $0.21 | ||||
![]() | Brick Curved 4 x 1 Double, No Studs ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick 1 x 3 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.11 $0.21 | ||||
![]() | Tile 2 x 2 with Ship Wheel and Barcode Print (Sticker) ![]() | 1 x $0.21 $0.21 | ||||
![]() | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.05 $0.21 | ||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.11 $0.21 | ||||
![]() | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick Arch 1 x 3 x 2 ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Tile 2 x 2 with Speech Bubble with '!' and Barcode Print (Sticker) ![]() | 1 x $0.21 $0.21 | ||||
![]() | Plate 2 x 2 ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick Special 1 x 2 with Masonry Brick Profile ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick 1 x 3 ![]() | 2 x $0.11 $0.21 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs and Spiked Ram and Barcode Print (Sticker) ![]() | 1 x $0.21 $0.21 | ||||
![]() | Plate Special 1 x 2 with Pin Hole Underneath ![]() | 2 x $0.11 $0.21 | ||||
![]() | Technic Beam 1 x 7 Thick ![]() | 2 x $0.11 $0.21 | ||||
![]() | Brick Curved 2 x 1 No Studs [1/2 Bow] ![]() | 4 x $0.05 $0.21 | ||||
![]() | Brick 1 x 2 ![]() | 5 x $0.04 $0.20 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 3 x $0.07 $0.20 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 3 x $0.07 $0.20 | ||||
![]() | Tile 2 x 2 with Bolt Nut and Barcode Print (Sticker) ![]() | 1 x $0.20 $0.20 | ||||
![]() | Tile Round 1 x 1 Half Circle ![]() | 3 x $0.07 $0.20 | ||||
![]() | Tile 2 x 2 with Face, Large White Eyes Print ![]() | 1 x $0.20 $0.20 | ||||
![]() | Tile 2 x 2 with Crowber and Barcode Print (Sticker) ![]() | 1 x $0.20 $0.20 | ||||
![]() | Plate 2 x 4 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 3 x $0.07 $0.20 | ||||
![]() | Technic Axle and Pin Connector Angled #5 - 112.5° ![]() | 1 x $0.20 $0.20 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 3 x $0.07 $0.20 | ||||
![]() | Plate 1 x 1 ![]() | 5 x $0.04 $0.20 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 1 x $0.20 $0.20 | ||||
![]() | Brick Arch 1 x 4 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 3 x $0.07 $0.20 | ||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | 3 x $0.07 $0.20 | ||||
![]() | Technic Axle 3 with Stop ![]() | 5 x $0.04 $0.20 | ||||
![]() | Tile Round 1 x 1 ![]() | 3 x $0.07 $0.20 | ||||
![]() | Brick 1 x 2 with White Question Mark '?' Print ![]() | 1 x $0.20 $0.20 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 3 x $0.07 $0.20 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 2 x $0.09 $0.19 | ||||
![]() | Bracket 1 x 1 - 1 x 1 Inverted ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile 2 x 2 with Fuzzy Face Print ![]() | 1 x $0.19 $0.19 | ||||
![]() | Tile 2 x 2 with Up / Down Arrow and Barcode Print (Sticker) ![]() | 2 x $0.09 $0.19 | ||||
![]() | Bracket 1 x 2 - 2 x 4 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate Round Corners 2 x 6 Double ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Left ![]() | 1 x $0.19 $0.19 | ||||
![]() | Brick Sloped 65° 2 x 1 x 2 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick 1 x 1 x 3 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick 1 x 4 ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 7 x $0.03 $0.19 | ||||
![]() | Technic Beam 3 x 3 T-Shape Thick ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick 2 x 3 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick Sloped 45° 2 x 4 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile Special 2 x 2 Inverted with Bowser Footprint and Barcode Print (Sticker) ![]() | 1 x $0.19 $0.19 | ||||
![]() | Brick 1 x 3 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 1 x 3 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate 2 x 6 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate Round Half 4 x 8 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Axle Pin 3L without Friction Ridges and 2L Axle ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.19 $0.19 | ||||
![]() | Technic Axle and Pin Connector Angled #6 - 90° ![]() | 1 x $0.19 $0.19 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.09 $0.19 | ||||
![]() | Plate Special 2 x 2 with Only 2 Studs ![]() | 2 x $0.09 $0.19 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 2 x $0.09 $0.19 | ||||
![]() | Brick 1 x 1 ![]() | 2 x $0.09 $0.19 | ||||
![]() | Tile 2 x 2 with Gear and Barcode Print (Sticker) ![]() | 1 x $0.17 $0.17 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Right ![]() | 1 x $0.17 $0.17 | ||||
![]() | Tile 2 x 4 with Groove ![]() | 1 x $0.17 $0.17 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick 1 x 4 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Plate 1 x 12 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Tile 2 x 2 with Reznor and Barcode Print (Sticker) ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | 1 x $0.17 $0.17 | ||||
![]() | Plate 1 x 8 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Technic Ball Joint ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick Sloped 45° 2 x 2 Double ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick 1 x 4 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Brick 1 x 4 ![]() | 1 x $0.17 $0.17 | ||||
![]() | Tile Round 1 x 1 ![]() | 3 x $0.05 $0.16 | ||||
![]() | Tile 2 x 2 with Bone Goomba and Barcode Print (Sticker) ![]() | 1 x $0.16 $0.16 | ||||
![]() | Plate Round Corners 8 x 8 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.16 $0.16 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 1 ![]() | 3 x $0.05 $0.16 | ||||
![]() | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) ![]() | 1 x $0.16 $0.16 | ||||
![]() | Technic Beam 3 x 3 T-Shape Thick ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin ![]() | 3 x $0.05 $0.16 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Special 1 x 1 with Studs on 2 Adjacent Sides ![]() | 2 x $0.08 $0.16 | ||||
![]() | Tile 1 x 1 with Groove ![]() | 4 x $0.04 $0.16 | ||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth ![]() | 4 x $0.04 $0.16 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | 3 x $0.05 $0.16 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate 1 x 3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick 2 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate Round Corners 2 x 6 Double ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 3 x $0.05 $0.16 | ||||
![]() | Brick Special 1 x 2 with 2 Pins, Square Pin Holes ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate 2 x 2 ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick 1 x 3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick 1 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Pin Connector Round [Slotted] ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 2 x 2 ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick Special 1 x 1 with Clip Horizontal ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick 1 x 1 ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Axle 6 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 2 x 14 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Wedge Plate 7 x 6 Boat Bow with Stud Notches ![]() | 1 x $0.16 $0.16 | ||||
![]() | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 12 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 3 x $0.05 $0.16 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Left ![]() | 1 x $0.16 $0.16 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 6 x $0.03 $0.16 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Arch 1 x 3 x 2 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Arch 1 x 3 x 3 [Gothic] ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | 2 x $0.08 $0.16 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 3 x $0.05 $0.16 | ||||
![]() | Plate 1 x 6 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.16 $0.16 | ||||
![]() | Tile Special 1 x 2 with Two Vertical Teeth / Tooth ![]() | 4 x $0.04 $0.16 | ||||
![]() | Technic Axle 6 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Pin Long without Friction Ridges, with Anti-Roll Notch ![]() | 4 x $0.04 $0.16 | ||||
![]() | Wedge Plate 3 x 3 Cut Corner ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Pin Connector Round [Slotted] ![]() | 1 x $0.16 $0.16 | ||||
![]() | Brick 2 x 2 Corner ![]() | 2 x $0.08 $0.16 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.08 $0.16 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 1 x $0.16 $0.16 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate 2 x 14 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Tile 1 x 1 with Groove ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 1 x 2 ![]() | 4 x $0.04 $0.16 | ||||
![]() | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom ![]() | 6 x $0.03 $0.16 | ||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | 1 x $0.16 $0.16 | ||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | 3 x $0.05 $0.16 | ||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | 4 x $0.04 $0.16 | ||||
![]() | Plate 2 x 8 ![]() | 1 x $0.16 $0.16 | ||||
![]() | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] ![]() | 3 x $0.05 $0.16 | ||||
![]() | Plate Special 2 x 2 with Only 2 Studs ![]() | 2 x $0.08 $0.16 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Technic Ball Joint ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side ![]() | 1 x $0.15 $0.15 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | 1 x $0.15 $0.15 | ||||
![]() | Tile Special 2 x 3 Pentagonal ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate 1 x 6 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Right ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Right ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick 1 x 4 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate Round Corners 8 x 8 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate 2 x 10 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 1 x $0.15 $0.15 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 1 x $0.15 $0.15 | ||||
![]() | Plate 1 x 8 ![]() | 1 x $0.15 $0.15 | ||||
![]() | Technic Ball Joint ![]() | 1 x $0.15 $0.15 | ||||
![]() | Brick Round 1 x 1 Open Stud ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 5 x $0.03 $0.13 | ||||
![]() | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs ![]() | 2 x $0.07 $0.13 | ||||
![]() | Antenna 1 x 4 with Flat Top ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Sloped 30° 1 x 2 x 2/3 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick 1 x 4 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Curved Inverted 2 x 1 ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Curved 1 x 2 x 1 No Studs ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 5 x $0.03 $0.13 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate 4 x 4 Corner ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Axle 2 Notched ![]() | 5 x $0.03 $0.13 | ||||
![]() | Plate Special 1 x 2 Rounded with 2 Open Studs ![]() | 2 x $0.07 $0.13 | ||||
![]() | Technic Pin without Friction Ridges Lengthwise ![]() | 5 x $0.03 $0.13 | ||||
![]() | Technic Axle 3 ![]() | 5 x $0.03 $0.13 | ||||
![]() | Plate 2 x 2 Corner ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick 2 x 3 ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 1 x 6 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Sloped Inverted 45° 2 x 1 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Wedged, Curved 2 x 1 with Stud Notch Left ![]() | 1 x $0.13 $0.13 | ||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick and Axle Separator v2.0 ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Round 2 x 2 Truncated Cone ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Curved 2 x 1 No Studs [1/2 Bow] ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs ![]() | 2 x $0.07 $0.13 | ||||
![]() | Hinge Brick 1 x 2 Base ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick 2 x 2 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Arch 1 x 6 Raised Arch ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate 3 x 3 ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Sloped 30° 1 x 2 x 2/3 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick and Axle Separator v2.0 ![]() | 1 x $0.13 $0.13 | ||||
![]() | Plate 1 x 4 ![]() | 2 x $0.07 $0.13 | ||||
![]() | Brick Special 1 x 4 Palisade [aka Log] ![]() | 2 x $0.07 $0.13 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.13 $0.13 | ||||
![]() | Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Turntable 4 x 4 Square Base, Locking ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.12 $0.12 | ||||
![]() | Wave / Flame Small with Pin ![]() | 3 x $0.04 $0.12 | ||||
![]() | Brick 1 x 2 with Blue Eyes (Yoshi) Print ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile Round 1 x 1 ![]() | 3 x $0.04 $0.12 | ||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Brick Curved 1 x 2 x 1 No Studs ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile Round 1 x 1 ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 3 x $0.04 $0.12 | ||||
![]() | Brick Curved 1 x 2 x 1 No Studs with Dark Pink Lines (Yoshi Nostrils) Print ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 3 x $0.04 $0.12 | ||||
![]() | Tile Round Corners 4 x 4 x 2/3 with Two Circle Arrows and Barcode Print (Sticker) ![]() | 1 x $0.12 $0.12 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | 3 x $0.04 $0.12 | ||||
![]() | Tile 2 x 2 with Fuzzy and Barcode Print (Sticker) ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate Special 4 x 4 Splat Gear, 10 Teeth ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate 2 x 8 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 3 x $0.04 $0.12 | ||||
![]() | Cone 1 x 1 [Top Groove] ![]() | 3 x $0.04 $0.12 | ||||
![]() | Dish 3 x 3 Inverted [Radar] ![]() | 1 x $0.12 $0.12 | ||||
![]() | Brick Special 2 x 2 with 2 Pins and Axle Hole ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.12 $0.12 | ||||
![]() | Tile 1 x 3 ![]() | 1 x $0.12 $0.12 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 3 x $0.04 $0.12 | ||||
![]() | Fence Spindled 4 x 4 x 2 Quarter Round with 3 Studs ![]() | 1 x $0.12 $0.12 | ||||
![]() | Wave / Flame Small with Pin ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.12 $0.12 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Round Half 3 x 6 with 1 x 2 Cutout ![]() | 1 x $0.12 $0.12 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 3 x $0.04 $0.12 | ||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | 3 x $0.04 $0.12 | ||||
![]() | Brick Sloped 45° 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick 1 x 3 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 8 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick Curved 2 x 1 No Studs [1/2 Bow] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 2 Corner ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 4 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] ![]() | 1 x $0.11 $0.11 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile Round 1 x 1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 3 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Special 1 x 4 with 4 Studs on One Side ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick Special 2 x 4 x 1 1/3 with Axle Holes and 2 x 2 Recessed and Hole ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | 2 x $0.05 $0.11 | ||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate 1 x 1 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate Special 1 x 2 with Handles on Ends ![]() | 2 x $0.05 $0.11 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate Special 2 x 2 with Pin on Bottom ![]() | 4 x $0.03 $0.11 | ||||
![]() | Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | 2 x $0.05 $0.11 | ||||
![]() | Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | 1 x $0.11 $0.11 | ||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | 2 x $0.05 $0.11 | ||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | 2 x $0.05 $0.11 | ||||
![]() | Technic Axle 4 with Stop ![]() | 4 x $0.03 $0.11 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.05 $0.11 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Plate Round Corners Double 4 x 8 with 2 x 2 Cutout and 2 x 8 Raised Studs, Reduces Nubs ![]() | 1 x $0.11 $0.11 | ||||
![]() | Brick Curved 2 x 2 x 2/3 ![]() | 1 x $0.11 $0.11 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Pin Connector Hub Perpendicular 3L with 4 Pins (Squared Holes) ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Special 4 x 4 with 2 x 2 Opening ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | 1 x $0.09 $0.09 | ||||
![]() | Tile Special Round 2 x 2 with Hole ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 1 x 4 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.09 $0.09 | ||||
![]() | Tile 2 x 2 with Groove ![]() | 1 x $0.09 $0.09 | ||||
![]() | Bracket 2 x 2 with 1 x 2 Vertical Studs ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Beam 3 x 3 T-Shape Thick ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick Sloped 45° 2 x 2 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.09 $0.09 | ||||
![]() | Tile 1 x 6 with Groove ![]() | 1 x $0.09 $0.09 | ||||
![]() | Technic Beam 1 x 3 Thick ![]() | 1 x $0.09 $0.09 | ||||
![]() | Brick 1 x 2 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | 1 x $0.09 $0.09 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.09 $0.09 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick Special 1 x 2 with 2 Pins, Square Pin Holes ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Pin 1/2 without Friction Ridges ![]() | 3 x $0.03 $0.08 | ||||
![]() | Technic Axle 5 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Tile Round 1 x 1 Quarter ![]() | 3 x $0.03 $0.08 | ||||
![]() | Brick 1 x 1 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plant, Flower, Plate Round 1 x 1 with 5 Petals ![]() | 3 x $0.03 $0.08 | ||||
![]() | Wedge Plate 2 x 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 1 x 2 5.9mm Towball Socket ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise with No Center Slots ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle Pin without Friction Ridges Lengthwise ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Curved 2 x 1 No Studs [1/2 Bow] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 2 x 2 with 2 Pins ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 1 x 1 with Open Stud ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 2 x 4 with 2 Pin Holes ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Wedge Plate 3 x 2 Right ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Pin Long without Friction Ridges, with Anti-Roll Notch ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Wedge Plate 3 x 2 Left ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Cone 1 x 1 [Top Groove] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate 1 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Bar 1 x 4 x 2 with Studs ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 1 x $0.08 $0.08 | ||||
![]() | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder ![]() | 2 x $0.04 $0.08 | ||||
![]() | Cone 2 x 2 x 2, Open Stud ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 3 x $0.03 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | 2 x $0.04 $0.08 | ||||
![]() | Hinge Plate 2 x 4 with Articulated Joint - Female ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle ![]() | 2 x $0.04 $0.08 | ||||
![]() | Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Sloped 45° 2 x 2 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick Sloped 30° 1 x 2 x 2/3 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle 4 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle and Pin Connector Perpendicular ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick 1 x 1 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Hinge Plate 2 x 4 with Articulated Joint - Male ![]() | 1 x $0.08 $0.08 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Brick Sloped 45° 2 x 1 with Bottom Pin ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick 1 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 1 x 2, Top Clip [Open O] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate 1 x 2 ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | 2 x $0.04 $0.08 | ||||
![]() | Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Gear 12 Tooth Bevel ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plant, Plate 1 x 1 Round with 3 Leaves ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 3 x $0.03 $0.08 | ||||
![]() | Brick 1 x 2 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate 2 x 6 ![]() | 1 x $0.08 $0.08 | ||||
![]() | Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.04 $0.08 | ||||
![]() | Technic Beam 3 x 3 T-Shape Thick ![]() | 1 x $0.08 $0.08 | ||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | 1 x $0.08 $0.08 | ||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | 2 x $0.04 $0.08 | ||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | 2 x $0.04 $0.08 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Tile Special Round 2 x 2 with Hole ![]() | 1 x $0.07 $0.07 | ||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate 1 x 2 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Brick Special 2 x 2 with Grooves and Axle Hole ![]() | 1 x $0.07 $0.07 | ||||
![]() | Brick 1 x 1 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate 1 x 4 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth ![]() | 1 x $0.07 $0.07 | ||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate 1 x 4 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Tile 1 x 4 with Groove ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Beam 3 x 5 L-Shape Thick ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.07 $0.07 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Disc 3 x 3 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | 1 x $0.07 $0.07 | ||||
![]() | Technic Beam 1 x 5 Thick ![]() | 1 x $0.07 $0.07 | ||||
![]() | Brick 1 x 1 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Round Corner 6 x 6 ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs ![]() | 1 x $0.07 $0.07 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 1 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | 2 x $0.03 $0.05 | ||||
![]() | Tile 1 x 2 with Groove ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 1 x $0.05 $0.05 | ||||
![]() | Turntable 2 x 2 Female ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Axle 3 ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 3 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick 1 x 3 with 2 Black Lines/Eyebrows Print ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot ![]() | 2 x $0.03 $0.05 | ||||
![]() | Plate 2 x 4 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Special 1 x 2 with Handles on Ends ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Special 4 x 6 with Trap Door Hinge [Long Pins] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Axle 4 with Stop ![]() | 2 x $0.03 $0.05 | ||||
![]() | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom ![]() | 1 x $0.05 $0.05 | ||||
![]() | Brick Sloped 30° 1 x 2 x 2/3 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Turntable 2 x 2 Female ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | 2 x $0.03 $0.05 | ||||
![]() | Plant, Flower, Plate Round 1 x 1 with 5 Petals ![]() | 2 x $0.03 $0.05 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate 2 x 2 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Special 2 x 4 with 2 Pin Holes ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Axle 8 with Stop ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 2 x $0.03 $0.05 | ||||
![]() | Tile Round 1 x 1 ![]() | 1 x $0.05 $0.05 | ||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | 1 x $0.05 $0.05 | ||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate 1 x 2 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick 1 x 2 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Tile Round 1 x 1 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plant, Plate 1 x 1 Round with 3 Leaves ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick Special 2 x 2 with 2 Pins and Axle Hole ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle 3 with Stop ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 2 x 2 with 2 Pins ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle 5 with Stop ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Pin Long without Friction Ridges, with Anti-Roll Notch ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle Pin without Friction Ridges Lengthwise ![]() | 1 x $0.04 $0.04 | ||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle 5 ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 2 x 4 with 2 Pin Holes ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick Special 1 x 2 Palisade [aka Log] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 2 x 2 with 2 Pins ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle 5 with Stop ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Pin Connector Round 1L [Beam] ![]() | 1 x $0.04 $0.04 | ||||
![]() | Technic Axle 3 with Stud ![]() | 1 x $0.04 $0.04 | ||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | 1 x $0.03 $0.03 | ||||
![]() | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Axle 3 ![]() | 1 x $0.03 $0.03 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 1 x $0.03 $0.03 | ||||
![]() | Cone 1 x 1 [Top Groove] ![]() | 1 x $0.03 $0.03 | ||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | 1 x $0.03 $0.03 | ||||
![]() | Hinge Plate 2 x 2 Locking with 1 Finger on Top ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | 1 x $0.03 $0.03 | ||||
![]() | Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole ![]() | 1 x $0.03 $0.03 | ||||
Missing pricing information on the following items.
| Part | Color | Quantity | |
|---|---|---|---|
![]() | Hub, Luigi with 4 Top Studs and LCD Screens for Eyes and Chest ![]() | ||
![]() | Tile Special 2 x 2 Inverted with Face Print ![]() | ||
![]() | Tile 2 x 2 with Lakitu and Barcode Print (Sticker) ![]() | ||
![]() | Brick 1 x 2 with White Dot on Short Side Print ![]() | ||
![]() | Tile 2 x 2 with Rocky Wrench and Barcode Print (Sticker) ![]() | ||
Compare the value of buying The Ultimate Bundle as a complete set versus the total value of all parts individually.
BrickLink 
Ratio: what the parts sell for, over what the set sells for. Above 1× the parts are worth more than the set.
New · 6 months ?
Set ? · parts $321.63
Used · 6 months ?
Set ? · parts $253.47
Brick Owl 
New · Current ?
Set ? · parts $423.12
New · 6 months ?
Set ? · parts $350.33
New · 1 year ?
Set ? · parts $358.25
Used · Current ?
Set ? · parts $328.97
Items sold, 6 months, new, both marketplaces ?
Find the cheapest offers for set 5007062-1 from sellers on secondary marketplaces like Brick Owl and eBay. As an eBay Partner Network Affiliate and Brick Owl Affiliate, I earn from qualifying purchases.
Brick Owl and eBay marketplace offers.
Notification
Notification
BrickLink history of 0 sales with 0 total item quantity. Item condition: New.
No sale history available.










![White Rubber Belt Small [15mm ID] [Round Cross Section]](https://api.brickonomics.net/assets/parts/85543/15/bricklink.webp)




![Dark Bluish Gray Technic Brick 1 x 14 [13 Pin Holes]](https://api.brickonomics.net/assets/parts/32018/72/lego_element_4211137_photoreal_00001.webp)









![Pearl Gold Brick Round 2 x 2 D. Tube with 45° Elbow and Axle Holes (Crossholes) at Each End [SHORT]](https://api.brickonomics.net/assets/parts/65473/297/lego_element_6357264_photoreal_00001.webp)






![Light Bluish Gray Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://api.brickonomics.net/assets/parts/85080/71/lego_element_4543240_photoreal_00001.webp)






![Black Technic Brick 1 x 8 [7 Pin Holes]](https://api.brickonomics.net/assets/parts/3702/0/lego_element_370226_photoreal_00001.webp)

![Pearl Gold Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://api.brickonomics.net/assets/parts/65304/297/lego_element_6287672_photoreal_00001.webp)








![Light Bluish Gray Technic Brick 1 x 6 [5 Pin Holes]](https://api.brickonomics.net/assets/parts/3894/71/lego_element_4211466_photoreal_00001.webp)





![Trans-Clear Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://api.brickonomics.net/assets/parts/87544/47/lego_element_6507949_photoreal_00001.webp)



![Black Technic Brick 1 x 4 [3 Pin Holes]](https://api.brickonomics.net/assets/parts/3701/0/lego_element_370126_photoreal_00001.webp)






![Reddish Brown Technic Axle Connector Smooth [with x Hole + Orientation]](https://api.brickonomics.net/assets/parts/59443/70/lego_element_4531751_photoreal_00001.webp)



![Dark Bluish Gray Technic Brick 1 x 16 [15 Pin Holes]](https://api.brickonomics.net/assets/parts/3703/72/lego_element_4256828_photoreal_00001.webp)



![Dark Red Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://api.brickonomics.net/assets/parts/87552/320/lego_element_6357263_photoreal_00001.webp)







![Black Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]](https://api.brickonomics.net/assets/parts/22388/0/lego_element_6312449_photoreal_00001.webp)














![Reddish Brown Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]](https://api.brickonomics.net/assets/parts/14395/70/lego_element_6044725_photoreal_00001.webp)





















![Black Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/0/lego_element_370026_photoreal_00001.webp)












![Light Bluish Gray Brick Arch 1 x 3 x 3 [Gothic]](https://api.brickonomics.net/assets/parts/13965/71/lego_element_6225228_photoreal_00001.webp)





![Light Bluish Gray Technic Pin Connector Round [Slotted]](https://api.brickonomics.net/assets/parts/62462/71/lego_element_6173127_photoreal_00001.webp)


![Medium Nougat Technic Plate 2 x 8 [7 Holes]](https://api.brickonomics.net/assets/parts/3738/84/lego_element_6363803_photoreal_00001.webp)

![Lime Technic Pin Connector Round [Slotted]](https://api.brickonomics.net/assets/parts/62462/27/lego_element_6308238_photoreal_00001.webp)














![Light Bluish Gray Brick Curved 2 x 1 No Studs [1/2 Bow]](https://api.brickonomics.net/assets/parts/11477/71/lego_element_6028813_photoreal_00001.webp)














![Tan Technic Pin Connector Round [Slotted]](https://api.brickonomics.net/assets/parts/62462/19/lego_element_6365624_photoreal_00001.webp)





























![Red Technic Pin Connector Round 1L [Beam]](https://api.brickonomics.net/assets/parts/18654/4/lego_element_6093950_photoreal_00001.webp)






















![Light Bluish Gray Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]](https://api.brickonomics.net/assets/parts/15672/71/lego_element_6093859_photoreal_00001.webp)














![Light Bluish Gray Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://api.brickonomics.net/assets/parts/28802/71/lego_element_6168615_photoreal_00001.webp)














































![Reddish Brown Plate Special 1 x 2 [Side Handle Closed Ends]](https://api.brickonomics.net/assets/parts/48336/70/lego_element_4551526_photoreal_00001.webp)

![Black Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes]](https://api.brickonomics.net/assets/parts/44874/0/lego_element_6366229_photoreal_00001.webp)




















![White Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/15/lego_element_3200001_photoreal_00001.webp)
![White Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://api.brickonomics.net/assets/parts/11153/15/lego_element_6045936_photoreal_00001.webp)





![Light Bluish Gray Brick Curved 1 x 3 x 2 Inverted [Inside Bow]](https://api.brickonomics.net/assets/parts/18653/71/lego_element_6129340_photoreal_00001.webp)
![Dark Bluish Gray Cone 4 x 4 x 2, Axle Hole [Plain]](https://api.brickonomics.net/assets/parts/3943b/72/lego_element_4296788_photoreal_00001.webp)














![Light Bluish Gray Technic Plate 2 x 6 [5 Holes]](https://api.brickonomics.net/assets/parts/32001/71/lego_element_4211542_photoreal_00001.webp)
![Tan Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]](https://api.brickonomics.net/assets/parts/22388/19/lego_element_6249125_photoreal_00001.webp)
























![Black Technic Brick 1 x 6 [5 Pin Holes]](https://api.brickonomics.net/assets/parts/3894/0/lego_element_389426_photoreal_00001.webp)






![White Technic Axle Connector Smooth [with x Hole + Orientation]](https://api.brickonomics.net/assets/parts/59443/15/lego_element_6212049_photoreal_00001.webp)








![Light Bluish Gray Fence Spindled 1 x 4 x 2 [4 Top Studs]](https://api.brickonomics.net/assets/parts/15332/71/lego_element_6057449_photoreal_00001.webp)
![Dark Bluish Gray Technic Brick 1 x 6 [5 Pin Holes]](https://api.brickonomics.net/assets/parts/3894/72/bricklink.webp)


![Dark Bluish Gray Technic Gear 8 Tooth [Reinforced]](https://api.brickonomics.net/assets/parts/10928/72/lego_element_6012451_photoreal_00001.webp)



















![Black Technic Axle Connector Double Flexible [Rubber]](https://api.brickonomics.net/assets/parts/45590/0/lego_element_4198367_photoreal_00001.webp)







![White Technic Plate 2 x 8 [7 Holes]](https://api.brickonomics.net/assets/parts/3738/15/lego_element_4527945_photoreal_00001.webp)


![Tan Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://api.brickonomics.net/assets/parts/28802/19/lego_element_6318084_photoreal_00001.webp)








![Dark Bluish Gray Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://api.brickonomics.net/assets/parts/61252/72/lego_element_6360111_photoreal_00001.webp)
![Light Bluish Gray Panel 1 x 2 x 1 [Rounded Corners]](https://api.brickonomics.net/assets/parts/4865b/71/lego_element_6146223_photoreal_00001.webp)













































![Tan Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://api.brickonomics.net/assets/parts/99563/19/lego_element_6271228_photoreal_00001.webp)

![Dark Bluish Gray Plate Special 1 x 2 with Handle on End [Closed Ends]](https://api.brickonomics.net/assets/parts/60478/72/lego_element_4521187_photoreal_00001.webp)
![Trans-Clear Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://api.brickonomics.net/assets/parts/87552/47/lego_element_6000740_photoreal_00001.webp)
![Reddish Brown Brick Special 1 x 2 Palisade [aka Log]](https://api.brickonomics.net/assets/parts/30136/70/lego_element_4211180_photoreal_00001.webp)



![Reddish Brown Technic Brick 1 x 4 [3 Pin Holes]](https://api.brickonomics.net/assets/parts/3701/70/lego_element_4267994_photoreal_00001.webp)
![Dark Bluish Gray Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]](https://api.brickonomics.net/assets/parts/15672/72/lego_element_4621917_photoreal_00001.webp)





![Sand Green Brick Curved 2 x 1 No Studs [1/2 Bow]](https://api.brickonomics.net/assets/parts/11477/378/lego_element_6196591_photoreal_00001.webp)







































![Black Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/0/lego_element_3200026_photoreal_00001.webp)



















![Dark Bluish Gray Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://api.brickonomics.net/assets/parts/32064a/72/lego_element_6178919_photoreal_00001.webp)







![White Brick Special 1 x 2 Palisade [aka Log]](https://api.brickonomics.net/assets/parts/30136/15/bricklink.webp)





![Lime Technic Pin Connector Round 1L [Beam]](https://api.brickonomics.net/assets/parts/18654/27/lego_element_6302741_photoreal_00001.webp)





![Reddish Brown Technic Pin Connector Round [Slotted]](https://api.brickonomics.net/assets/parts/62462/70/lego_element_6173132_photoreal_00001.webp)

![Dark Bluish Gray Brick Special 1 x 2 Palisade [aka Log]](https://api.brickonomics.net/assets/parts/30136/72/lego_element_4211095_photoreal_00001.webp)








![Tan Technic Pin Connector Round 1L [Beam]](https://api.brickonomics.net/assets/parts/18654/19/lego_element_6167923_photoreal_00001.webp)
![Light Bluish Gray Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://api.brickonomics.net/assets/parts/10247/71/lego_element_6045988_photoreal_00001.webp)











![Reddish Brown Brick Arch 1 x 3 x 3 [Gothic]](https://api.brickonomics.net/assets/parts/13965/70/lego_element_6055086_photoreal_00001.webp)








![White Technic Pin Connector Round [Slotted]](https://api.brickonomics.net/assets/parts/62462/15/lego_element_6173116_photoreal_00001.webp)






![Light Bluish Gray Technic Brick 1 x 4 [3 Pin Holes]](https://api.brickonomics.net/assets/parts/3701/71/lego_element_4211441_photoreal_00001.webp)

![Tan Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://api.brickonomics.net/assets/parts/60897/19/lego_element_6352222_photoreal_00001.webp)

![Light Bluish Gray Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://api.brickonomics.net/assets/parts/41740/71/lego_element_6257593_photoreal_00001.webp)
































![Tan Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://api.brickonomics.net/assets/parts/3660/19/lego_element_4118866_photoreal_00001.webp)




![Reddish Brown Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://api.brickonomics.net/assets/parts/11153/70/lego_element_6045941_photoreal_00001.webp)











![Medium Nougat Brick Special 1 x 4 Palisade [aka Log]](https://api.brickonomics.net/assets/parts/30137/84/lego_element_4651232_photoreal_00001.webp)






















![Dark Bluish Gray Cone 1 x 1 [Top Groove]](https://api.brickonomics.net/assets/parts/59900/72/lego_element_4529240_photoreal_00001.webp)
![White Dish 3 x 3 Inverted [Radar]](https://api.brickonomics.net/assets/parts/43898/15/lego_element_4179580_photoreal_00001.webp)






![Black Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://api.brickonomics.net/assets/parts/10247/0/lego_element_6061032_photoreal_00001.webp)




![Tan Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/19/lego_element_370005_photoreal_00001.webp)



![Bright Light Orange Brick Curved 2 x 1 No Studs [1/2 Bow]](https://api.brickonomics.net/assets/parts/11477/191/lego_element_6099728_photoreal_00001.webp)












![White Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]](https://api.brickonomics.net/assets/parts/22388/15/lego_element_6314487_photoreal_00001.webp)






![White Plate Special 1 x 2 with Three Teeth [Tri-Tooth]](https://api.brickonomics.net/assets/parts/15208/15/lego_element_6046381_photoreal_00001.webp)











![Black Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://api.brickonomics.net/assets/parts/3660/0/lego_element_366026_photoreal_00001.webp)











![Lime Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://api.brickonomics.net/assets/parts/99206/27/lego_element_6264064_photoreal_00001.webp)
![Black Technic Plate 2 x 6 [5 Holes]](https://api.brickonomics.net/assets/parts/32001/0/lego_element_3200126_photoreal_00001.webp)






















![White Technic Pin Connector Round 1L [Beam]](https://api.brickonomics.net/assets/parts/18654/15/lego_element_6177114_photoreal_00001.webp)


![Lime Brick Curved 2 x 1 No Studs [1/2 Bow]](https://api.brickonomics.net/assets/parts/11477/27/lego_element_6069006_photoreal_00001.webp)





![White Technic Plate 2 x 4 [3 Holes]](https://api.brickonomics.net/assets/parts/3709/15/lego_element_370901_photoreal_00001.webp)
![Light Bluish Gray Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://api.brickonomics.net/assets/parts/32064a/71/lego_element_6206249_photoreal_00001.webp)





![Light Bluish Gray Cone 1 x 1 [Top Groove]](https://api.brickonomics.net/assets/parts/59900/71/lego_element_4529241_photoreal_00001.webp)
















![Reddish Brown Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/70/lego_element_4211252_photoreal_00001.webp)

![Light Bluish Gray Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://api.brickonomics.net/assets/parts/60470b/71/lego_element_6337268_photoreal_00001.webp)



![Black Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://api.brickonomics.net/assets/parts/32064a/0/lego_element_6178922_photoreal_00001.webp)
![Yellow Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/14/lego_element_370024_photoreal_00001.webp)
![Reddish Brown Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://api.brickonomics.net/assets/parts/99563/70/lego_element_6261744_photoreal_00001.webp)


![Medium Nougat Brick Special 1 x 2 Palisade [aka Log]](https://api.brickonomics.net/assets/parts/30136/84/lego_element_4651231_photoreal_00001.webp)
![Black Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://api.brickonomics.net/assets/parts/65304/0/lego_element_6321745_photoreal_00001.webp)
![Light Bluish Gray Plate Special 1 x 2, Top Clip [Open O]](https://api.brickonomics.net/assets/parts/44861/71/lego_element_6326078_photoreal_00001.webp)

![Yellow Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://api.brickonomics.net/assets/parts/32064a/14/lego_element_4233484_photoreal_00001.webp)
![Light Bluish Gray Plate Special 1 x 2 Side Handle [Free Ends]](https://api.brickonomics.net/assets/parts/2540/71/lego_element_4211632_photoreal_00001.webp)
![Light Bluish Gray Plate Special 1 x 2 with Handle on End [Closed Ends]](https://api.brickonomics.net/assets/parts/60478/71/lego_element_4515369_photoreal_00001.webp)
![Trans-Orange Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]](https://api.brickonomics.net/assets/parts/22388/182/lego_element_6129855_photoreal_00001.webp)








![Green Dish 2 x 2 Inverted [Radar]](https://api.brickonomics.net/assets/parts/4740/2/lego_element_4567908_photoreal_00001.webp)





![Tan Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://api.brickonomics.net/assets/parts/99206/19/lego_element_6132769_photoreal_00001.webp)



![Black Technic Plate 2 x 4 [3 Holes]](https://api.brickonomics.net/assets/parts/3709/0/lego_element_370926_photoreal_00001.webp)


![Dark Bluish Gray Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/72/lego_element_4211111_photoreal_00001.webp)







![Red Technic Axle Connector Smooth [with x Hole + Orientation]](https://api.brickonomics.net/assets/parts/59443/4/lego_element_4513174_photoreal_00001.webp)
![Red Technic Brick 1 x 2 [2 Pin Holes]](https://api.brickonomics.net/assets/parts/32000/4/lego_element_4179355_photoreal_00001.webp)
![Black Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://api.brickonomics.net/assets/parts/60470b/0/lego_element_6310268_photoreal_00001.webp)



![Black Plate Special 4 x 6 with Trap Door Hinge [Long Pins]](https://api.brickonomics.net/assets/parts/92099/0/lego_element_6057903_photoreal_00001.webp)




![Dark Bluish Gray Technic Pin Connector Round 1L [Beam]](https://api.brickonomics.net/assets/parts/18654/72/lego_element_6100030_photoreal_00001.webp)
![Dark Bluish Gray Technic Plate 2 x 4 [3 Holes]](https://api.brickonomics.net/assets/parts/3709/72/lego_element_4227398_photoreal_00001.webp)





![Light Bluish Gray Technic Brick 1 x 2 [1 Pin Hole]](https://api.brickonomics.net/assets/parts/3700/71/lego_element_4211440_photoreal_00001.webp)
![Red Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://api.brickonomics.net/assets/parts/2654/4/lego_element_4163711_photoreal_00001.webp)






![Black Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://api.brickonomics.net/assets/parts/2654/0/lego_element_265426_photoreal_00001.webp)

![Reddish Brown Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://api.brickonomics.net/assets/parts/3660/70/lego_element_4211221_photoreal_00001.webp)

![Tan Brick Special 1 x 2 Palisade [aka Log]](https://api.brickonomics.net/assets/parts/30136/19/lego_element_4218749_photoreal_00001.webp)

![Green Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://api.brickonomics.net/assets/parts/32064a/2/lego_element_6206248_photoreal_00001.webp)



![Yellow Cone 1 x 1 [Top Groove]](https://api.brickonomics.net/assets/parts/59900/14/lego_element_4525464_photoreal_00001.webp)








