Classic Collection (5004243-1)
Price Comparison
No retailers currently stock Classic Collection in The United States.
Create your personal pricewatch
Create an account to get your personal pricewatch. You will receive an email each time the price of a set in your pricewatch changes.
Go to the login/registration to set up your pricewatch.
Set details
Name: Classic CollectionSet number: 5004243-1
Year: 2014
Theme: Star Wars
Number of parts: 0
Number of part types: 868
Browse all 0 parts in set 5004243-1 with individual pricing from BrickLink or Brick Owl.
Pricing information known of 856/868 parts.
| Part | Color | Quantity | Average price | Total | Value | |||
|---|---|---|---|---|---|---|---|---|
![]() | Plate 6 x 12 ![]() | |||||||
![]() | Wedge Curved 4 x 4 No Top Studs ![]() | |||||||
![]() | Animal / Creature Accessory Bridle ![]() | |||||||
![]() | Creature Body Part, Dewback Lower Jaw with Teeth Print ![]() | |||||||
![]() | Minifig Trophy Statuette, Hooded Figure (Emperor Palpatine Hologram) ![]() | |||||||
![]() | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole ![]() | |||||||
![]() | Dish 6 x 6 Inverted (Radar) with Solid Studs ![]() | |||||||
![]() | Technic Brick 1 x 16 [15 Pin Holes] ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Plate 6 x 12 ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Plate Special 4 x 6 with Studs on 3 Edges ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Plate Special 6 x 12 with Studs on 3 Edges ![]() | |||||||
![]() | Tile 1 x 2 with Avionics Copper, Red & Silver Print ![]() | |||||||
![]() | Hose Rigid 3mm D. 20L / 16cm ![]() | |||||||
![]() | Technic Beam 1 x 11 Thick ![]() | |||||||
![]() | String Cord Thin (0.5mm) 50cm ![]() | |||||||
![]() | Equipment Crystal Ball Globe 2 x 2 x 2 ![]() | |||||||
![]() | Bar 8L - Two Stop Rings / One Pin, Technic Figure Ski Pole [Rounded End] ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Technic Brick 1 x 12 [11 Pin Holes] ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove (Jumper) ![]() | |||||||
![]() | Wedge Plate 6 x 3 Right ![]() | |||||||
![]() | Wedge Plate 6 x 3 Left ![]() | |||||||
![]() | Plate Special 6 x 12 with Studs on 3 Edges ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Wedge Plate 12 x 3 Right ![]() | |||||||
![]() | Wedge Plate 12 x 3 Left ![]() | |||||||
![]() | Brick Special 1 x 2 with Vertical Clip [Thick U Clip] ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Plate 8 x 8 ![]() | |||||||
![]() | Wedge Curved 6 x 2 Right, Inner Ridges ![]() | |||||||
![]() | Wedge Curved 6 x 2 Left, Inner Ridges ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Plate 3 x 3 ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Panel 1 x 4 x 3 [Hollow Studs] ![]() | |||||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Technic Brick 1 x 16 [15 Pin Holes] ![]() | |||||||
![]() | Technic Beam 3 x 5 L-Shape with Quarter Ellipse Thin ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Plate 6 x 8 ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Wedge 3 x 3 Facet ![]() | |||||||
![]() | Windscreen 8 x 8 x 3 Dome with Dual 2 Fingers - 7 Teeth ![]() | |||||||
![]() | Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End) ![]() | |||||||
![]() | Dish 4 x 4 Inverted [Radar] ![]() | |||||||
![]() | Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Tile 1 x 1 with SW Snowtrooper Backpack Print ![]() | |||||||
![]() | Tile 1 x 1 with SW Snowtrooper Backpack Print ![]() | |||||||
![]() | Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] ![]() | |||||||
![]() | Plate 6 x 10 ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Technic Rotation Joint Disk with Pin and 3L Beam Thick ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Bar Holder with Clip ![]() | |||||||
![]() | Plate Special 4 x 4 with Studs on One Edge [Plain] ![]() | |||||||
![]() | Brick Arch 1 x 6 x 2 Curved Top ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular Double Split ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Turntable 2 x 2 Plate, Base ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular Double 4L ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove (Jumper) ![]() | |||||||
![]() | Hinge Plate 2 x 4 with Pin Hole - Top ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Plate 6 x 8 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Technic Steering Knuckle Arm with Ball Joint ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Weapon Gun / Blaster Short (Star Wars) ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Technic Beam 1 x 5 Thin with Axle Holes on Ends ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Minifig Neckwear Bracket [One Stud] ![]() | |||||||
![]() | Minifig Neckwear Bracket [One Stud] ![]() | |||||||
![]() | Minifig Neckwear Bracket [One Stud] ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] ![]() | |||||||
![]() | Slope Curved 4 x 2 No Studs ![]() | |||||||
![]() | Panel 1 x 4 x 5 with Arched Window ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Windscreen 7 x 4 x 2 Round with Handle ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | |||||||
![]() | Technic Brick 1 x 14 [13 Pin Holes] ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Bar 6L with Stop Ring ![]() | |||||||
![]() | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim ![]() | |||||||
![]() | Wedge Plate 2 x 4 ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Windscreen 7 x 4 x 1 2/3 with Hinges with Light and Dark Gray Frame Print ![]() | |||||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] ![]() | |||||||
![]() | Slope 65° 2 x 2 x 2 with Bottom Tube ![]() | |||||||
![]() | Plate 6 x 6 ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Technic Plate 2 x 8 [7 Holes] ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Slope 18° 4 x 1 ![]() | |||||||
![]() | Technic Pin Connector Hub Perpendicular 3L with 4 Pins ![]() | |||||||
![]() | Wedge Sloped 4 x 4 Triple, Stud Notches ![]() | |||||||
![]() | Hose Rigid 3mm D. 12L / 9.6cm ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Technic Beam 1 x 3 Thick ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Slope Curved 2 x 1 No Studs [1/2 Bow] ![]() | |||||||
![]() | Slope 65° 2 x 1 x 2 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Wedge Plate 6 x 12 Left ![]() | |||||||
![]() | Plate 6 x 8 ![]() | |||||||
![]() | Wedge Plate 6 x 3 Right ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Bottom ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Slope Curved 4 x 1 Double with No Studs ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Tile Special 1 x 1 with Clip with Rounded Tips ![]() | |||||||
![]() | Tile Special 2 x 2 Inverted ![]() | |||||||
![]() | Technic Brick 6 x 8 with 4 x 6 Opening ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Technic Pin Connector Perpendicular 2 x 2 Bent ![]() | |||||||
![]() | Technic Brick 4 x 4 with 2 x 2 Opening ![]() | |||||||
![]() | Brick 1 x 8 ![]() | |||||||
![]() | Wedge Plate 6 x 12 Right ![]() | |||||||
![]() | Weapon Gun / Blaster Short (Star Wars) ![]() | |||||||
![]() | Wedge Plate 6 x 3 Left ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Wheel 31 x 15 Technic, 7 Pin Holes ![]() | |||||||
![]() | Turntable 2 x 2 Plate - Top ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Slope 45° 2 x 3 ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Equipment Whip [aka Plant Vine] ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | |||||||
![]() | Bar 1L with Top Stud and Two Side Studs ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | |||||||
![]() | Cone 2 x 2 x 2, Open Stud ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Wedge Curved Inverted 6 x 2 Left ![]() | |||||||
![]() | Plate 4 x 12 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Plate Special 1 x 2 with Clip Horizontal on End ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Technic Link 1 x 6 without Stoppers ![]() | |||||||
![]() | Technic Beam 1 x 4 Thin with Stud Connector ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Plate 3 x 3 ![]() | |||||||
![]() | Slope 18° 4 x 1 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Technic Beam 1 x 4 Thin with Stud Connector ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Antenna 8H Whip ![]() | |||||||
![]() | Weapon Gun / Blaster Small (Star Wars) ![]() | |||||||
![]() | Technic Beam 1 x 11.5 Double Bent Thick ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | |||||||
![]() | Windscreen 4 x 4 x 1 ![]() | |||||||
![]() | Plate 2 x 12 ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Stylised Computer Console Print ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Plate Special 4 x 4 with Studs on One Edge [Plain] ![]() | |||||||
![]() | Slope Inverted 34° 3 x 1 with Internal Stopper ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove (Jumper) ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End) ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Plate Round 4 x 4 with 2 x 2 Round Opening ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | |||||||
![]() | Bar 6L with Stop Ring ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate 1 x 12 ![]() | |||||||
![]() | Cupboard 2 x 3 Drawer ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Weapon Gun / Blaster Long (Star Wars) ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise and Towball ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Brick Special 1 x 2 with Studs on 2 Sides ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Plate Round Corner 4 x 4 ![]() | |||||||
![]() | Technic Axle Connector Hub with 3 Axles at 120° ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Projectile, Spring Shooter Ammunition 8L Bar ![]() | |||||||
![]() | Panel 4 x 4 x 6 Quarter Cylinder ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Flag 2 x 2 Trapezoid with Flat Area between Clips ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth ![]() | |||||||
![]() | Technic Beam 3 x 5 L-Shape Thick ![]() | |||||||
![]() | Technic Beam 1 x 3 Thick ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Engine Smooth Large [2 x 2 Thin Top Plate] ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | |||||||
![]() | Tile 1 x 8 with Groove ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Wedge 3 x 2 Left ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Technic Axle 4 ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | |||||||
![]() | Plate Special 1 x 2 [Top Clip] ![]() | |||||||
![]() | Technic Axle 5 ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Barrel 2 x 2 x 2 ![]() | |||||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Wedge Plate 4 x 6 Cut Corners ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Wedge Plate 6 x 12 Left ![]() | |||||||
![]() | Wedge 3 x 2 Right ![]() | |||||||
![]() | Wedge Plate 6 x 12 Left ![]() | |||||||
![]() | Wedge Plate 6 x 3 Right ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Wedge Curved Inverted 6 x 2 Right ![]() | |||||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | |||||||
![]() | Technic Axle 9 ![]() | |||||||
![]() | Weapon Gun / Blaster Small (Star Wars) ![]() | |||||||
![]() | Technic Beam 1 x 5 Thin with Axle Holes on Ends ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Flag 2 x 2 Square, Flat Clip Edge [Thick Clips] ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs ![]() | |||||||
![]() | Weapon Gun / Blaster Small (Star Wars) ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Slope Curved 2 x 1 No Studs [1/2 Bow] ![]() | |||||||
![]() | Hinge Plate 2 x 4 with Pin Hole - Top ![]() | |||||||
![]() | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle ![]() | |||||||
![]() | Technic Plate 2 x 6 [5 Holes] ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 4 ![]() | |||||||
![]() | Wedge Plate 6 x 12 Right ![]() | |||||||
![]() | Wedge Curved 6 x 2 Left, Inner Ridges ![]() | |||||||
![]() | Weapon Gun / Blaster Short (Star Wars) ![]() | |||||||
![]() | Wedge Plate 6 x 12 Right ![]() | |||||||
![]() | Brick 2 x 8 ![]() | |||||||
![]() | Technic Pin 3/4 ![]() | |||||||
![]() | Technic Beam 2 x 4 L-Shape Thick ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole ![]() | |||||||
![]() | Wedge 4 x 2 Left ![]() | |||||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Plate Special 1 x 8 with Door Rail ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate 1 x 10 ![]() | |||||||
![]() | Plate 2 x 14 ![]() | |||||||
![]() | Plate Special 4 x 4 with Studs on One Edge [Plain] ![]() | |||||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular Double Split ![]() | |||||||
![]() | Wedge Curved 6 x 2 Right, Inner Ridges ![]() | |||||||
![]() | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Plate Special 1 x 2 with Ladder ![]() | |||||||
![]() | Technic Brick 1 x 10 [9 Pin Holes] ![]() | |||||||
![]() | Technic Pin Connector Round [Slotted] ![]() | |||||||
![]() | Cone 3 x 3 x 2 ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Brick Special 1 x 4 with Groove ![]() | |||||||
![]() | Plate Special 2 x 2 with Pin on Bottom ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | |||||||
![]() | Plate 4 x 8 ![]() | |||||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | |||||||
![]() | Technic Brick 1 x 4 [3 Pin Holes] ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | |||||||
![]() | Technic Beam 1 x 4 Thin ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular Split ![]() | |||||||
![]() | Wedge Plate 6 x 3 Left ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Panel 1 x 4 x 1 with Rounded Corners [Thick Wall] ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Cupboard 2 x 3 x 2 with Hollow Studs ![]() | |||||||
![]() | Slope 75° 2 x 2 x 3 [Solid Studs] ![]() | |||||||
![]() | Brick Special 2 x 2 with Pin and Axle Hole ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Technic Pin Connector Round [Slotted] ![]() | |||||||
![]() | Wedge Curved Inverted 6 x 4 ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Technic Axle 5 with Stop ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Hinge Brick 1 x 2 Base ![]() | |||||||
![]() | Technic Plate 2 x 4 [3 Holes] ![]() | |||||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | |||||||
![]() | Wedge Plate 6 x 3 Right ![]() | |||||||
![]() | Wedge Plate 6 x 3 Left ![]() | |||||||
![]() | Brick Special 2 x 2 with Grooves and Axle Hole ![]() | |||||||
![]() | Technic Beam 1 x 9 Thick ![]() | |||||||
![]() | Technic Beam 1 x 3 Thin ![]() | |||||||
![]() | Brick Round 2 x 2 Truncated Cone ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 4 x 6 ![]() | |||||||
![]() | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes ![]() | |||||||
![]() | Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs ![]() | |||||||
![]() | Plate 4 x 4 Corner ![]() | |||||||
![]() | Brick 1 x 6 ![]() | |||||||
![]() | Slope 45° 2 x 2 Double Convex ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Hinge Brick 1 x 2 Locking with 1 Finger Horizontal End ![]() | |||||||
![]() | Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8 ![]() | |||||||
![]() | Technic Beam 1 x 7 Thick ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | |||||||
![]() | Technic Axle 4 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Panel 1 x 2 x 1 with Rounded Corners and Central Divider ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Brick Special 1 x 4 with Groove ![]() | |||||||
![]() | Brick 1 x 2 ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Brick 2 x 2 Corner ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Wedge Plate 3 x 3 Cut Corner ![]() | |||||||
![]() | Brick Special 1 x 1 Studs on 4 Sides ![]() | |||||||
![]() | Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Brick Special 1 x 2 with Pin ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] ![]() | |||||||
![]() | Plate Special 1 x 2 with Handle on End [Closed Ends] ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | |||||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | |||||||
![]() | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] ![]() | |||||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | |||||||
![]() | Panel 1 x 1 x 1 Corner ![]() | |||||||
![]() | Slope Curved 2 x 2 x 2/3 ![]() | |||||||
![]() | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Wedge Plate 4 x 2 Right ![]() | |||||||
![]() | Wedge Plate 4 x 2 Left ![]() | |||||||
![]() | Technic Pin Connector Plate with One Hole (Single on Bottom) ![]() | |||||||
![]() | Technic Beam 1 x 3 Thin ![]() | |||||||
![]() | Technic Brick 1 x 8 [7 Pin Holes] ![]() | |||||||
![]() | Brick Round 2 x 2 [Grill] ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] ![]() | |||||||
![]() | Brick Round 2 x 2 [Grill] ![]() | |||||||
![]() | Technic Beam 1 x 9 Bent (6 - 4) Thick ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Brick Special 1 x 1 with Headlight ![]() | |||||||
![]() | Panel 1 x 1 x 1 Corner ![]() | |||||||
![]() | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Projectile, Spring Shooter Ammunition 8L Bar ![]() | |||||||
![]() | Wedge 3 x 4 [Stud Notches] ![]() | |||||||
![]() | Plate 2 x 8 ![]() | |||||||
![]() | Wedge 3 x 4 [Stud Notches] ![]() | |||||||
![]() | Projectile, Spring Shooter Ammunition 8L Bar ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Projectile, Spring Shooter Ammunition 8L Bar ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Technic Bush ![]() | |||||||
![]() | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Technic Beam 1 x 3 Thin ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Wheel 11 x 8 with Center Groove ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | |||||||
![]() | Tile 1 x 1 with Groove ![]() | |||||||
![]() | Plate Special 2 x 8 with Door Rail ![]() | |||||||
![]() | Panel 2 x 2 x 1 Corner ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Tile 1 x 6 with Groove ![]() | |||||||
![]() | Technic Axle 8 ![]() | |||||||
![]() | Slope 18° 4 x 2 ![]() | |||||||
![]() | Slope 45° 2 x 4 ![]() | |||||||
![]() | Hinge Brick 1 x 2 Top Plate Thin ![]() | |||||||
![]() | Plate Special 1 x 2 with 1 Stud with Groove (Jumper) ![]() | |||||||
![]() | Brick Round 2 x 2 Dome Top, Hollow Stud ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | Wedge 4 x 2 Right ![]() | |||||||
![]() | Tile Special 2 x 2 Inverted ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Weapon Gun / Blaster Small (Star Wars) ![]() | |||||||
![]() | Weapon Gun / Blaster Small (Star Wars) ![]() | |||||||
![]() | Plate 1 x 8 ![]() | |||||||
![]() | Tile 2 x 4 with Groove ![]() | |||||||
![]() | Wedge 4 x 2 Right ![]() | |||||||
![]() | Brick 2 x 6 ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Brick 1 x 4 ![]() | |||||||
![]() | Plate 4 x 4 ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #2 - 180° ![]() | |||||||
![]() | Bar 1L with Top Stud and Two Side Studs ![]() | |||||||
![]() | Bar 5L with Handle (Friction Ram) ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Tile 2 x 2 with Groove ![]() | |||||||
![]() | Wedge 4 x 2 Left ![]() | |||||||
![]() | Brick 2 x 4 ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Slope Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin ![]() | |||||||
![]() | Technic Axle 5 ![]() | |||||||
![]() | Technic Axle 6 ![]() | |||||||
![]() | Wedge Plate 2 x 4 ![]() | |||||||
![]() | Hinge Brick 2 x 2 Top Plate Thin ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Wedge Plate 3 x 3 Cut Corner ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Technic Gear 12 Tooth Double Bevel ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 2 Inverted ![]() | |||||||
![]() | Lever Small Base with Black Lever ![]() | |||||||
![]() | Tool Grappling Hook ![]() | |||||||
![]() | Tile Round 2 x 2 with Bottom Stud Holder ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] ![]() | |||||||
![]() | Brick 2 x 2 ![]() | |||||||
![]() | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | |||||||
![]() | Technic Axle 6 ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] ![]() | |||||||
![]() | Hinge Plate 2 x 2 Locking with 1 Finger on Top ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Brick Special 1 x 2 with Vertical Clip [Thick U Clip] ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular Double ![]() | |||||||
![]() | Brick Special 1 x 2 with Grille ![]() | |||||||
![]() | Slope Inverted 34° 3 x 1 with Internal Stopper ![]() | |||||||
![]() | Technic Beam 1 x 5 Thick ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | |||||||
![]() | Plate 2 x 10 ![]() | |||||||
![]() | Technic Brick 1 x 6 [5 Pin Holes] ![]() | |||||||
![]() | Brick 2 x 3 ![]() | |||||||
![]() | String Reel 2 x 2 Winch Holder ![]() | |||||||
![]() | Equipment Cup / Mug [Plain] ![]() | |||||||
![]() | Equipment Cup / Mug [Plain] ![]() | |||||||
![]() | Technic Axle 4 with Stop ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Wedge Plate 6 x 3 Left ![]() | |||||||
![]() | Wedge Curved Inverted 6 x 2 Left ![]() | |||||||
![]() | Brick and Axle Separator v2.0 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] ![]() | |||||||
![]() | Equipment Shovel [Rounded Handle End] ![]() | |||||||
![]() | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top ![]() | |||||||
![]() | Brick and Axle Separator v2.0 ![]() | |||||||
![]() | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 Inverted ![]() | |||||||
![]() | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top ![]() | |||||||
![]() | Bracket 1 x 2 - 1 x 4 [Rounded Corners] ![]() | |||||||
![]() | String Reel 2 x 2 Winch Drum ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 4 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Hinge Plate 1 x 2 Locking with 1 Finger On Top ![]() | |||||||
![]() | Wedge Plate 3 x 2 Left ![]() | |||||||
![]() | Slope Curved 2 x 1 No Studs [1/2 Bow] ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Weapon Lightsaber Hilt with Bottom Ring ![]() | |||||||
![]() | Plate Special 2 x 2 with Groove and Center Stud (Jumper) ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Brick Round 2 x 2 with Axle Hole ![]() | |||||||
![]() | Brick and Axle Separator v2.0 ![]() | |||||||
![]() | Engine Smooth Large [2 x 2 Thin Top Plate] ![]() | |||||||
![]() | Brick Curved 6 x 1 Inverted ![]() | |||||||
![]() | Slope 33° 3 x 2 ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | |||||||
![]() | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top ![]() | |||||||
![]() | Brick and Axle Separator v2.0 ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | |||||||
![]() | Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] ![]() | |||||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | |||||||
![]() | Technic Beam 1 x 5 Thick ![]() | |||||||
![]() | Panel 1 x 2 x 1 with Rounded Corners and Central Divider ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Tile 1 x 3 ![]() | |||||||
![]() | Wedge Sloped 4 x 4 Taper, with Stud Notches ![]() | |||||||
![]() | Wedge Plate 3 x 2 Right ![]() | |||||||
![]() | Technic Steering Wheel Small (3 Studs Diameter) ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Slope Curved 3 x 1 No Studs ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots ![]() | |||||||
![]() | Technic Brick 1 x 1 with Pin Hole ![]() | |||||||
![]() | Technic Brick 1 x 2 [2 Pin Holes] ![]() | |||||||
![]() | Technic Axle 4 with Stop ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | |||||||
![]() | Antenna 1 x 4 with Flat Top ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Slope Curved 4 x 1 Inverted ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Technic Axle 8 with Stop ![]() | |||||||
![]() | Plate Special 1 x 2 with Door Rail ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 2 x 2 Corner ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Plate 1 x 1 ![]() | |||||||
![]() | Technic Axle and Pin Connector Angled #1 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Bracket 1 x 2 - 2 x 2 ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Technic Pin Connector Round [Slotted] ![]() | |||||||
![]() | Tile 1 x 2 with Groove ![]() | |||||||
![]() | Slope 45° 2 x 2 ![]() | |||||||
![]() | Brick Special 1 x 1 with Stud on 1 Side ![]() | |||||||
![]() | Wheel 11 x 8 with Center Groove ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Studs on 1 Side ![]() | |||||||
![]() | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes] ![]() | |||||||
![]() | Dish 3 x 3 Inverted [Radar] ![]() | |||||||
![]() | Brick Special 1 x 2 x 2/3 with Studs on Sides ![]() | |||||||
![]() | Tile Round 2 x 2 with Hole ![]() | |||||||
![]() | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 ![]() | |||||||
![]() | Plate Special 1 x 4 with 2 Studs ![]() | |||||||
![]() | Slope 30° 1 x 2 x 2/3 ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Brick 1 x 3 ![]() | |||||||
![]() | Wheel 11 x 8 with Center Groove ![]() | |||||||
![]() | Plate 2 x 6 ![]() | |||||||
![]() | Wedge Plate 4 x 6 Cut Corners ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced ![]() | |||||||
![]() | Tile Round 1 x 1 ![]() | |||||||
![]() | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Plate Special 1 x 2 [Top Clip] ![]() | |||||||
![]() | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] ![]() | |||||||
![]() | Technic Axle 5 ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | |||||||
![]() | Technic Beam 1 x 5 Thick ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Plate Special 1 x 4 Offset with Bar Holes ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Plate Special 1 x 2 [Top Clip] ![]() | |||||||
![]() | Plate Round 4 x 4 with Pin Hole ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Left ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Technic Bush ![]() | |||||||
![]() | Brick Special 1 x 2 with Pin ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | |||||||
![]() | Launcher, Weapon Gun / Blaster / Shooter Mini ![]() | |||||||
![]() | Plate Special 1 x 2 [Side Handle Closed Ends] ![]() | |||||||
![]() | Technic Pin 1/2 ![]() | |||||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | |||||||
![]() | Tile Special 1 x 2 Grille with Bottom Groove ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] ![]() | |||||||
![]() | Hinge Brick 1 x 2 Base ![]() | |||||||
![]() | Tile 1 x 4 with Groove ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Plate 1 x 3 ![]() | |||||||
![]() | Plate 1 x 4 ![]() | |||||||
![]() | Lever Small Base with Black Lever ![]() | |||||||
![]() | Tile Special 2 x 2 with Top Pin ![]() | |||||||
![]() | Brick Curved 1 x 2 x 1 1/3 with Curved Top ![]() | |||||||
![]() | Technic Axle 6 ![]() | |||||||
![]() | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes ![]() | |||||||
![]() | Brick 1 x 2 x 2 with Inside Stud Holder ![]() | |||||||
![]() | Wedge Plate 4 x 4 Cut Corner ![]() | |||||||
![]() | Technic Axle Connector Smooth [with x Hole + Orientation] ![]() | |||||||
![]() | Plate 4 x 4 Corner ![]() | |||||||
![]() | Plate 2 x 3 ![]() | |||||||
![]() | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] ![]() | |||||||
![]() | Equipment Space Binoculars / Scanner / Electrobinoculars ![]() | |||||||
![]() | Wedge Plate 8 x 3, 22° Right ![]() | |||||||
![]() | Bar 4L (Lightsaber Blade / Wand) ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | |||||||
![]() | Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] ![]() | |||||||
![]() | Plate 1 x 2 ![]() | |||||||
![]() | Animal Body Part, Dog Bone [Long] ![]() | |||||||
![]() | Plate 1 x 6 ![]() | |||||||
![]() | Brick 1 x 1 ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Equipment Space Binoculars / Scanner / Electrobinoculars ![]() | |||||||
![]() | Brick Round 1 x 1 Open Stud ![]() | |||||||
![]() | Plate 2 x 4 ![]() | |||||||
![]() | Technic Beam 1 x 3 Thick ![]() | |||||||
![]() | Technic Axle 5.5 with Stop [Rounded Short End] ![]() | |||||||
![]() | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate ![]() | |||||||
![]() | Technic Axle Pin with Friction Ridges Lengthwise ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders] ![]() | |||||||
![]() | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Handlebars ![]() | |||||||
![]() | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] ![]() | |||||||
![]() | Plate 2 x 2 ![]() | |||||||
![]() | Tap 1 x 1 without Hole in Spout ![]() | |||||||
![]() | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] ![]() | |||||||
![]() | Hinge Plate 2 x 2 Locking with 1 Finger on Top ![]() | |||||||
![]() | Steering Stand 1 x 2 with Black Steering Wheel ![]() | |||||||
![]() | Technic Pin with Friction Ridges Lengthwise and Center Slots ![]() | |||||||
![]() | Slope 45° 2 x 1 with Bottom Pin ![]() | |||||||
![]() | Technic Bush ![]() | |||||||
![]() | Technic Axle Towball ![]() | |||||||
![]() | Technic Axle 2 Notched ![]() | |||||||
![]() | Technic Axle 3 ![]() | |||||||
![]() | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] ![]() | |||||||
![]() | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] ![]() | |||||||
![]() | Tool Screwdriver and Spanner / Wrench ![]() | |||||||
![]() | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End ![]() | |||||||
![]() | Brick Special 1 x 2 with 2 Pins, Round Pin Holes ![]() | |||||||
![]() | Technic Brick 1 x 2 [1 Pin Hole] ![]() | |||||||
![]() | Plate Special 4 x 6 with Trap Door Hinge [Long Pins] ![]() | |||||||
![]() | Technic Beam 2 x 4 L-Shape Thick ![]() | |||||||
![]() | Technic Axle 4 ![]() | |||||||
![]() | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | |||||||
![]() | Plate Special 1 x 2 Side Handle [Free Ends] ![]() | |||||||
![]() | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] ![]() | |||||||
![]() | Slope Inverted 45° 2 x 1 ![]() | |||||||
![]() | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] ![]() | |||||||
![]() | Panel 1 x 2 x 1 [Rounded Corners] ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Plate Round 1 x 1 with Solid Stud ![]() | |||||||
![]() | Dish 2 x 2 Inverted [Radar] ![]() | |||||||
![]() | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] ![]() | |||||||
![]() | Technic Axle 3 ![]() | |||||||
![]() | Technic Axle 3 ![]() | |||||||
![]() | Cone 1 x 1 [Top Groove] ![]() | |||||||
![]() | Slope 30° 1 x 1 x 2/3 (Cheese Slope) ![]() | |||||||
![]() | Launcher Trigger, Weapon Gun Trigger ![]() | |||||||
Missing pricing information on the following items.
| Part | Color | Quantity | |
|---|---|---|---|
![]() | Equipment Hose Nozzle / Gun with Side String Hole Simplified ![]() | ||
![]() | Equipment Hose Nozzle / Gun with Side String Hole Simplified ![]() | ||
![]() | Seat / Chair 2 x 2 with Center Sprue Mark ![]() | ||
![]() | Seat / Chair 2 x 2 with Center Sprue Mark ![]() | ||
![]() | Seat / Chair 2 x 2 with Center Sprue Mark ![]() | ||
![]() | Sticker Sheet for Set 75050-1 ![]() | ||
![]() | Poster, AT-AT, Battle of Hoth ![]() | ||
![]() | Sticker Sheet for Set 75049-1 ![]() | ||
![]() | Creature Body Part, Dewback Body, Claws and Short Tail, with Eyes and Nostrils and Leg Spots Print ![]() | ||
![]() | Sticker Sheet for Set 75052-1 ![]() | ||
![]() | Sticker Sheet for Set 75055-1 ![]() | ||
![]() | Poster, Star Destroyer, B-Wing | ||
Compare the value of buying Classic Collection as a complete set versus the total value of all parts individually.
BrickLink ![]() | |||||
| Condition | Timespan | Avg price | Items sold | Inventory value | Ratio |
| New | 6 months | ? | ? | $818.29 | ? |
| Used | 6 months | ? | ? | $0.00 | ? |
Brick Owl ![]() | ||||
| Condition | Timespan | Avg price | Inventory value | Ratio |
| New | Current | ? | $1573.52 | ? |
| 6 months | ? | $734.88 | ? | |
| 1 year | ? | $765.90 | ? | |
| Used | Current | ? | $756.80 | ? |
| Combined 6 Month Sales Volume (New) | |
| Total items sold | ? |
Find the cheapest offers for set 5004243-1 from sellers on secondary marketplaces like Brick Owl and eBay. As an eBay Partner Network Affiliate and Brick Owl Affiliate, I earn from qualifying purchases.
| Item | Price | |
|---|---|---|
BrickLink history of 0 sales with 0 total item quantity. Item condition: New.
No sale history available.









![Image of part Technic Brick 1 x 16 [15 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211443.jpg)










![Image of part Bar 8L - Two Stop Rings / One Pin, Technic Figure Ski Pole [Rounded End]](https://cdn.rebrickable.com/media/parts/ldraw/71/2714a.png)

![Image of part Technic Brick 1 x 12 [11 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211860.jpg)
















![Image of part Brick Special 1 x 2 with Vertical Clip [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/4125237.jpg)







![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211436.jpg)




![Image of part Panel 1 x 4 x 3 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/3000742.jpg)
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211442.jpg)


![Image of part Plate Special 3 x 4 with 1 x 4 Center Studs [Plain]](https://cdn.rebrickable.com/media/parts/elements/6079461.jpg)

![Image of part Technic Brick 1 x 16 [15 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4256828.jpg)



![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4271344.jpg)








![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211664.jpg)






![Image of part Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version]](https://cdn.rebrickable.com/media/parts/elements/6052783.jpg)


![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045943.jpg)








![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/4211837.jpg)




![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4210917.jpg)











![Image of part Minifig Neckwear Bracket [One Stud]](https://cdn.rebrickable.com/media/parts/elements/4211760.jpg)

![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4227507.jpg)





![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211137.jpg)








![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6335378.jpg)




![Image of part Technic Plate 2 x 8 [7 Holes]](https://cdn.rebrickable.com/media/parts/elements/4260707.jpg)










![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4217562.jpg)
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6069984.jpg)
















![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg)












![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg)





![Image of part Equipment Whip [aka Plant Vine]](https://cdn.rebrickable.com/media/parts/elements/248826.jpg)







![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146223.jpg)

![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4213607.jpg)

![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4140806.jpg)


![Image of part Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]](https://cdn.rebrickable.com/media/parts/elements/6075057.jpg)

















![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg)










![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4205107.jpg)
![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/4210849.jpg)









![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg)

![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515369.jpg)








![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg)


















![Image of part Engine Smooth Large [2 x 2 Thin Top Plate]](https://cdn.rebrickable.com/media/parts/elements/4214586.jpg)




![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278412.jpg)


![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4587212.jpg)
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598526.jpg)














![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/4/32064d.png)




![Image of part Flag 2 x 2 Square, Flat Clip Edge [Thick Clips]](https://cdn.rebrickable.com/media/parts/elements/6011794.jpg)



![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6028813.jpg)

![Image of part Technic Plate 2 x 6 [5 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211542.jpg)








![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4567448.jpg)


![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211466.jpg)


![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370126.jpg)


![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4593679.jpg)

![Image of part Technic Brick 1 x 10 [9 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211374.jpg)
![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526982.jpg)


![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4164004.jpg)






![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6337268.jpg)
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370226.jpg)
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211441.jpg)
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389426.jpg)






![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]](https://cdn.rebrickable.com/media/parts/elements/4613766.jpg)

![Image of part Slope 75° 2 x 2 x 3 [Solid Studs]](https://cdn.rebrickable.com/media/parts/elements/6007894.jpg)




![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526985.jpg)





![Image of part Technic Plate 2 x 4 [3 Holes]](https://cdn.rebrickable.com/media/parts/elements/370921.jpg)
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211010.jpg)




























![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg)







![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/4143943.jpg)
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg)
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4210762.jpg)
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4215339.jpg)
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211865.jpg)
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611701.jpg)
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211541.jpg)





![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370221.jpg)
![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/4650645.jpg)


![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4164471.jpg)





![Image of part Wedge 3 x 4 [Stud Notches]](https://cdn.rebrickable.com/media/parts/elements/4285771.jpg)


![Image of part Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]](https://cdn.rebrickable.com/media/parts/elements/4210763.jpg)

![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529241.jpg)









































![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://cdn.rebrickable.com/media/parts/elements/4654577.jpg)


![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474001.jpg)











![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6284379.jpg)

![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4210935.jpg)


![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg)

![Image of part Brick Special 1 x 2 with Vertical Clip [Thick U Clip]](https://cdn.rebrickable.com/media/parts/ldraw/72/30237.png)



![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4594238.jpg)


![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/6238856.jpg)







![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211000.jpg)
![Image of part Equipment Shovel [Rounded Handle End]](https://cdn.rebrickable.com/media/parts/elements/4211006.jpg)
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6059033.jpg)
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6089574.jpg)



![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6034044.jpg)






![Image of part Engine Smooth Large [2 x 2 Thin Top Plate]](https://cdn.rebrickable.com/media/parts/elements/4263610.jpg)




![Image of part Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/6079036.jpg)
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4516546.jpg)











![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg)
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)

![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512360.jpg)



















![Image of part Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4560175.jpg)
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4210865.jpg)









![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611700.jpg)

![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6345426.jpg)

![Image of part Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]](https://cdn.rebrickable.com/media/parts/elements/4596895.jpg)

![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4519010.jpg)





![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6014616.jpg)



![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4222017.jpg)
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289542.jpg)


![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585429.jpg)




![Image of part Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]](https://cdn.rebrickable.com/media/parts/elements/6061711.jpg)




![Image of part Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/6030726.jpg)
![Image of part Animal Body Part, Dog Bone [Long]](https://cdn.rebrickable.com/media/parts/elements/4600307.jpg)





![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg)

![Image of part Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders]](https://cdn.rebrickable.com/media/parts/elements/4595707.jpg)
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4655257.jpg)
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529240.jpg)

![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6310268.jpg)







![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278274.jpg)



![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370021.jpg)
![Image of part Plate Special 4 x 6 with Trap Door Hinge [Long Pins]](https://cdn.rebrickable.com/media/parts/elements/4595710.jpg)

![Image of part Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]](https://cdn.rebrickable.com/media/parts/elements/4649049.jpg)
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg)


![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4518400.jpg)
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146215.jpg)
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529242.jpg)
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211512.jpg)
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529247.jpg)











