 | Bracket 1 x 2 - 1 x 2 Inverted   | Dark Blue
| 16 | $0.46 | $7.36 | |
 | Plate 2 x 2 | Medium Lavender
| 8 | $0.69 | $5.52 | |
 | Tile Round 1 x 1 Quarter | Opal Trans-Purple
| 32 | $0.16 | $5.19 | |
 | Shield Triangular with White Diamond, Gold Decorations on Medium Blue Background print | Light Bluish Gray
| 1 | $3.45 | $3.45 | |
 | Animal, Horse with Raised Leg, Black Mane and Tail, White Nose print | Light Bluish Gray
| 1 | $2.45 | $2.45 | |
 | Creature Body Part, Dragon Wing 19 x 11 with Marbled Trans-Purple Pattern | Black
| 2 | $1.22 | $2.43 | |
 | Dish 4 x 4 with 4 Studs | Black
| 4 | $0.58 | $2.33 | |
 | Bracket 1 x 2 - 2 x 2 Inverted | Light Aqua
| 16 | $0.14 | $2.16 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Pearl Gold
| 4 | $0.54 | $2.16 | |
 | Slope Curved 3 x 2 with Stud Notch Left | Black
| 3 | $0.72 | $2.15 | |
 | Slope Curved 3 x 2 with Stud Notch Right | Black
| 3 | $0.69 | $2.07 | |
 | Animal / Creature Body Part, Claw with Clip | Black
| 12 | $0.16 | $1.95 | |
 | Animal Body Part, Dragon Head Long, Trans-Pink Fins on Side, Lime Eyes, Dark Purple Markings print | Black
| 1 | $1.76 | $1.76 | |
 | Equipment Broom End | Black
| 2 | $0.85 | $1.70 | |
![Image of part Animal Body Part, Dinosaur, Baryonyx Lower Jaw [Plain]](https://cdn.rebrickable.com/media/parts/elements/6497557.jpg) | Animal Body Part, Dinosaur, Baryonyx Lower Jaw [Plain] | Black
| 1 | $1.58 | $1.58 | |
 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | Reddish Brown
| 2 | $0.78 | $1.57 | |
 | Animal / Creature Body Part, Tail / Claw / Horn / Branch / Tentacle, End Section, Large | Black
| 1 | $1.28 | $1.28 | |
 | Minidoll Neckwear, Pointed Shoulder Pads | Pearl Gold
| 1 | $1.22 | $1.22 | |
 | Bracket 1 x 2 - 2 x 2 | Dark Purple
| 4 | $0.28 | $1.14 | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Dark Purple
| 14 | $0.08 | $1.14 | |
 | Plate 1 x 2 | Black
| 16 | $0.07 | $1.08 | |
 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | Dark Purple
| 8 | $0.11 | $0.87 | |
 | Headwear Accessory Visor Grille with Top Pin Hole (Castle) | Pearl Gold
| 1 | $0.87 | $0.87 | |
 | Brick Round 2 x 2 with Axle Hole | Sand Blue
| 2 | $0.42 | $0.84 | |
 | Plate Round Corner 2 x 2 with 1 x 1 Cutout | Pearl Gold
| 2 | $0.39 | $0.78 | |
 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin Holes | Black
| 1 | $0.78 | $0.78 | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top | Black
| 8 | $0.09 | $0.76 | |
 | Plate 1 x 2 | Lime
| 27 | $0.03 | $0.73 | |
 | Plate Round 6 x 6 with Hole | Tan
| 2 | $0.37 | $0.73 | |
 | Tile Round 2 x 4 | Black
| 2 | $0.37 | $0.73 | |
 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky | Green
| 6 | $0.12 | $0.73 | |
 | Helmet, Standard | Light Bluish Gray
| 1 | $0.72 | $0.72 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Dark Purple
| 4 | $0.18 | $0.70 | |
 | Slope 30° 1 x 2 x 2/3 | Black
| 10 | $0.07 | $0.68 | |
 | Slope 30° 1 x 2 x 2/3 | Magenta
| 8 | $0.08 | $0.65 | |
 | Bar, Angled with 1 x 1 Round Plate / Stud on End | Black
| 2 | $0.31 | $0.62 | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | Black
| 5 | $0.12 | $0.61 | |
 | Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | Black
| 2 | $0.30 | $0.59 | |
 | Weapon Sword / Shortsword Elaborate Hilt | Flat Silver
| 2 | $0.30 | $0.59 | |
 | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout | Bright Pink
| 4 | $0.15 | $0.59 | |
 | Tower Roof 2 x 4 x 4 Half Cone Shaped with Roof Tiles | Dark Azure
| 2 | $0.30 | $0.59 | |
 | Brick 1 x 6 | White
| 2 | $0.27 | $0.54 | |
 | Plate 1 x 1 x 2/3 with Open Stud | Black
| 4 | $0.14 | $0.54 | |
 | Animal / Creature Accessory, Horse Saddle with Stirrups and Top Stud | Dark Turquoise
| 1 | $0.50 | $0.50 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Dark Bluish Gray
| 3 | $0.16 | $0.49 | |
 | Barrel 2 x 2 x 2 | Medium Nougat
| 1 | $0.49 | $0.49 | |
 | Brick 2 x 2 Corner | Yellow
| 4 | $0.12 | $0.49 | |
 | Tile 1 x 2 with Groove | Bright Light Blue
| 4 | $0.12 | $0.49 | |
 | Slope Curved 2 x 1 Inverted | Black
| 4 | $0.12 | $0.49 | |
 | Panel 3 x 4 x 6 with Arched Window | White
| 1 | $0.47 | $0.47 | |
![Image of part Minidoll Hips and Full Length Skirt, White Stars, Bright Pink Underdress print [Thin Hinge]](https://cdn.rebrickable.com/media/parts/elements/6422027.jpg) | Minidoll Hips and Full Length Skirt, White Stars, Bright Pink Underdress print [Thin Hinge] | Dark Pink
| 1 | $0.46 | $0.46 | |
 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | Light Bluish Gray
| 2 | $0.23 | $0.46 | |
![Image of part Brick Arch 1 x 3 x 3 [Gothic]](https://cdn.rebrickable.com/media/parts/elements/6038525.jpg) | Brick Arch 1 x 3 x 3 [Gothic] | White
| 3 | $0.15 | $0.45 | |
 | Brick 2 x 4 | Yellow
| 3 | $0.15 | $0.45 | |
 | Brick Special 1 x 1 with Scroll with Open Stud | Pearl Gold
| 8 | $0.05 | $0.43 | |
 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Black
| 4 | $0.11 | $0.43 | |
 | Wedge 3 x 3 Facet | Light Bluish Gray
| 4 | $0.11 | $0.43 | |
 | Brick Curved, 3 x 1 with 1/3 Inverted Cutout | Black
| 4 | $0.11 | $0.43 | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs | Black
| 4 | $0.11 | $0.43 | |
 | Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | Bright Pink
| 1 | $0.43 | $0.43 | |
 | Wedge Plate 2 x 2 Cut Corner | Black
| 4 | $0.11 | $0.43 | |
 | Bar 3L with Handle, Stop Ring and Side Stops (Minifig Ski Pole) | Pearl Gold
| 3 | $0.14 | $0.41 | |
 | Plate Special 2 x 3 with Rocks | Black
| 5 | $0.08 | $0.41 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Light Aqua
| 4 | $0.09 | $0.38 | |
 | Brick Curved 1 x 2 x 1 No Studs | Dark Purple
| 4 | $0.09 | $0.38 | |
 | Tile Special 1 x 2 with Two Vertical Teeth / Tooth | Black
| 2 | $0.19 | $0.38 | |
 | Technic Beam 1 x 2 Thick | Black
| 2 | $0.19 | $0.38 | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket | Light Bluish Gray
| 9 | $0.04 | $0.37 | |
 | Bracket 1 x 1 - 1 x 1 Inverted | Light Bluish Gray
| 2 | $0.18 | $0.35 | |
 | Technic Bush | Black
| 2 | $0.18 | $0.35 | |
![Image of part Wedge Curved 4 x 3 No Studs [Plain]](https://cdn.rebrickable.com/media/parts/elements/6477151.jpg) | Wedge Curved 4 x 3 No Studs [Plain] | Dark Purple
| 2 | $0.18 | $0.35 | |
 | Plate 2 x 6 | Medium Lavender
| 5 | $0.07 | $0.34 | |
 | Window 1 x 2 x 2 Castle | White
| 1 | $0.34 | $0.34 | |
 | Plate 1 x 10 | Black
| 2 | $0.16 | $0.32 | |
 | Brick Special 1 x 2 with Masonry Brick Profile | Light Bluish Gray
| 3 | $0.11 | $0.32 | |
 | Tile 2 x 2 with Groove | Bright Light Blue
| 3 | $0.11 | $0.32 | |
 | Bar, Angled with 1 x 1 Round Plate / Stud on End | Trans-Clear
| 3 | $0.11 | $0.32 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | Black
| 8 | $0.04 | $0.32 | |
 | Plate Special 1 x 2 with End Towball | Dark Bluish Gray
| 4 | $0.08 | $0.32 | |
 | Brick 1 x 1 | White
| 4 | $0.08 | $0.32 | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Bright Pink
| 8 | $0.04 | $0.32 | |
 | Brick Curved 2 x 2, Two Top Studs | Light Bluish Gray
| 1 | $0.31 | $0.31 | |
 | Brick Round, Half 1 x 2 | White
| 2 | $0.15 | $0.30 | |
 | Plate Special 1 x 2 with Angled Handles on Side | Black
| 4 | $0.07 | $0.27 | |
 | Plate 2 x 2 Corner | Dark Purple
| 2 | $0.14 | $0.27 | |
 | Technic Axle Connector Hub with 3 Axles at 120° | Reddish Brown
| 1 | $0.26 | $0.26 | |
 | Container Box 2 x 2 x 1 Reinforced Bottom | Medium Nougat
| 1 | $0.26 | $0.26 | |
 | Plate 2 x 12 | Dark Purple
| 1 | $0.24 | $0.24 | |
 | Technic Steering Wheel Small (3 Studs Diameter) | Black
| 1 | $0.24 | $0.24 | |
 | Bar Holder with Hole and Bar Handle | Lime
| 1 | $0.24 | $0.24 | |
 | Plate Round Corner 2 x 2 with 1 x 1 Cutout | Magenta
| 2 | $0.12 | $0.24 | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6168620.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | Black
| 6 | $0.04 | $0.24 | |
 | Plant, Plate 1 x 1 Round with 3 Leaves | Lime
| 4 | $0.05 | $0.22 | |
 | Slope Curved 4 x 1 Inverted | Black
| 4 | $0.05 | $0.22 | |
 | Slope Inverted 45° 2 x 1 | Black
| 4 | $0.05 | $0.22 | |
 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | White
| 2 | $0.11 | $0.22 | |
 | Slope 75° 2 x 1 x 3 with Hollow Stud | Light Bluish Gray
| 1 | $0.22 | $0.22 | |
 | Slope 45° 2 x 2 | Black
| 2 | $0.11 | $0.22 | |
 | Brick Arch 1 x 6 Raised Arch | Dark Pink
| 2 | $0.11 | $0.22 | |
 | Cloud / Dust with Bar | Trans-Bright Green
| 1 | $0.22 | $0.22 | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | Dark Bluish Gray
| 3 | $0.07 | $0.20 | |
 | Plate 2 x 3 | Dark Purple
| 3 | $0.07 | $0.20 | |
 | Brick 2 x 2 | Medium Azure
| 3 | $0.07 | $0.20 | |
 | Slope 75° 2 x 1 x 3 with Hollow Stud | Reddish Brown
| 1 | $0.20 | $0.20 | |
 | Flame / Headwear Accessory Plume / Feather, Triple Point | Trans-Dark Pink
| 1 | $0.20 | $0.20 | |
 | Slope Curved 2 x 2 x 2/3 | Black
| 3 | $0.07 | $0.20 | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet | Black
| 2 | $0.09 | $0.19 | |
 | Slope Curved 2 x 2 x 2/3 Inverted | Black
| 2 | $0.09 | $0.19 | |
 | Wedge Plate 2 x 2 Cut Corner | Bright Light Blue
| 2 | $0.09 | $0.19 | |
 | Brick Curved 1 x 4 x 1 Rounded Ends | Dark Purple
| 1 | $0.19 | $0.19 | |
 | Technic Ball Joint with Through Axle Hole | Black
| 1 | $0.18 | $0.18 | |
 | Tile Round 1 x 1 with Blue Fairy Godmother print | Opal Trans-Dark Blue
| 1 | $0.18 | $0.18 | |
 | Plant, Flower, Plate Round 1 x 1 with 5 Petals | Magenta
| 6 | $0.03 | $0.16 | |
 | Tile Round 1 x 1 Quarter | Magenta
| 6 | $0.03 | $0.16 | |
![Image of part Plate Special 1 x 2 with Three Teeth [Tri-Tooth]](https://cdn.rebrickable.com/media/parts/elements/6207764.jpg) | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | Pearl Gold
| 3 | $0.05 | $0.16 | |
 | Brick 2 x 4 | White
| 1 | $0.16 | $0.16 | |
 | Tile Round 1 x 1 with Red Fairy Godmother print | Opal Trans-Dark Pink
| 1 | $0.16 | $0.16 | |
 | Plate 10 x 10 with Rounded End | Lavender
| 1 | $0.16 | $0.16 | |
 | Tile Round 1 x 1 with Green Fairy Godmother print | Opal Trans-Bright Green
| 1 | $0.16 | $0.16 | |
 | Slope Curved 2 x 1 with Stud Notch Left | Black
| 1 | $0.16 | $0.16 | |
 | Technic Pin 1/2 | White
| 1 | $0.16 | $0.16 | |
 | Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | Dark Purple
| 2 | $0.08 | $0.16 | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side | Tan
| 2 | $0.08 | $0.16 | |
 | Plate 1 x 3 | Bright Light Orange
| 2 | $0.08 | $0.16 | |
 | Bracket 1 x 2 - 2 x 4 | Light Bluish Gray
| 2 | $0.08 | $0.16 | |
 | Brick Special 1 x 1 with Stud on 1 Side | Bright Pink
| 4 | $0.04 | $0.16 | |
 | Slope 30° 1 x 2 x 2/3 | Dark Purple
| 4 | $0.04 | $0.16 | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball | Dark Bluish Gray
| 4 | $0.04 | $0.16 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529236.jpg) | Cone 1 x 1 [Top Groove] | Black
| 4 | $0.04 | $0.16 | |
 | Rock 1 x 1 Jewel / Gem 24 Facet | Trans-Purple
| 1 | $0.15 | $0.15 | |
 | Window Pane Latticed 1 x 2 x 2 | Pearl Gold
| 1 | $0.15 | $0.15 | |
 | Slope Curved 2 x 1 with Stud Notch Right | Black
| 1 | $0.15 | $0.15 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529247.jpg) | Cone 1 x 1 [Top Groove] | Pearl Gold
| 5 | $0.03 | $0.14 | |
 | Brick and Axle Separator v2.0 | Dark Turquoise
| 1 | $0.14 | $0.14 | |
 | Plate 1 x 4 | Black
| 2 | $0.07 | $0.14 | |
 | Plate Round Half 4 x 8 | Bright Green
| 2 | $0.07 | $0.14 | |
 | Cone 2 x 2 x 2, Open Stud | Dark Azure
| 2 | $0.07 | $0.14 | |
 | Creature Body Part, Horn (Unicorn) | White
| 1 | $0.14 | $0.14 | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 2 | $0.07 | $0.14 | |
 | Plate Special 3 x 2 with Rounded End, Hole | Black
| 1 | $0.12 | $0.12 | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | Black
| 3 | $0.04 | $0.12 | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Dark Purple
| 3 | $0.04 | $0.12 | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529239.jpg) | Cone 1 x 1 [Top Groove] | Green
| 3 | $0.04 | $0.12 | |
 | Tile 2 x 4 with Groove | Dark Purple
| 1 | $0.12 | $0.12 | |
 | Slope Inverted 45° 2 x 1 | White
| 3 | $0.04 | $0.12 | |
 | Plate Round 1 x 1 with Open Stud | Pearl Gold
| 4 | $0.03 | $0.11 | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper) | Magenta
| 4 | $0.03 | $0.11 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 2 | $0.05 | $0.11 | |
 | Equipment Magic Wand | Trans-Dark Pink
| 1 | $0.11 | $0.11 | |
 | Rock 1 x 1 Jewel / Gem 24 Facet | Trans-Bright Green
| 1 | $0.11 | $0.11 | |
 | Food Cupcake with Stud | Light Aqua
| 1 | $0.11 | $0.11 | |
 | Bar 2L with Stop in Center | Dark Bluish Gray
| 1 | $0.11 | $0.11 | |
 | Brick 2 x 3 | Yellow
| 1 | $0.09 | $0.09 | |
 | Plant, Leaves 4 x 3 | Green
| 1 | $0.09 | $0.09 | |
 | Brick Special 1 x 2 x 2/3 with Studs on Sides | Black
| 1 | $0.09 | $0.09 | |
 | Plate Round 4 x 4 with Pin Hole | Tan
| 1 | $0.09 | $0.09 | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots | Black
| 3 | $0.03 | $0.08 | |
 | Cone 3 x 3 x 2 | Black
| 1 | $0.08 | $0.08 | |
 | Tile 45° Cut 2 x 2 (Triangle) | Magenta
| 1 | $0.08 | $0.08 | |
![Image of part Brick Arch 1 x 3 x 3 [Gothic]](https://cdn.rebrickable.com/media/parts/elements/6055086.jpg) | Brick Arch 1 x 3 x 3 [Gothic] | Reddish Brown
| 1 | $0.08 | $0.08 | |
 | Wave / Flame Small with Pin | Trans-Orange
| 2 | $0.04 | $0.08 | |
 | Slope 30° 1 x 2 x 2/3 | White
| 1 | $0.07 | $0.07 | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | Medium Lavender
| 1 | $0.07 | $0.07 | |
 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | Dark Bluish Gray
| 1 | $0.07 | $0.07 | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439052.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | Lavender
| 1 | $0.05 | $0.05 | |
 | Slope 45° 2 x 2 | Dark Purple
| 1 | $0.05 | $0.05 | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Pearl Gold
| 2 | $0.03 | $0.05 | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | Black
| 2 | $0.03 | $0.05 | |
 | Plate 2 x 4 | Tan
| 1 | $0.05 | $0.05 | |
 | Plate Round 1 x 1 Swirled Top / Poo | Reddish Brown
| 1 | $0.05 | $0.05 | |
 | Plant, Carrot | Orange
| 1 | $0.05 | $0.05 | |
 | Plate 2 x 2 | Light Bluish Gray
| 1 | $0.05 | $0.05 | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | White
| 1 | $0.04 | $0.04 | |
 | Plate 2 x 4 | Magenta
| 1 | $0.04 | $0.04 | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211252.jpg) | Technic Brick 1 x 2 [1 Pin Hole] | Reddish Brown
| 1 | $0.04 | $0.04 | |
 | Tile 1 x 2 with Groove | Magenta
| 1 | $0.04 | $0.04 | |
 | Technic Axle 5 with Stop | Reddish Brown
| 1 | $0.04 | $0.04 | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | Black
| 1 | $0.04 | $0.04 | |
 | Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | Black
| 1 | $0.04 | $0.04 | |
 | Technic Axle 2 Notched | Red
| 1 | $0.03 | $0.03 | |
 | Technic Pin 1/2 with 2L Bar Extension | Light Bluish Gray
| 1 | $0.03 | $0.03 | |
 | Plant, Carrot Top | Bright Green
| 1 | $0.03 | $0.03 | |
 | Technic Axle 5 | Yellow
| 1 | $0.03 | $0.03 | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 1 | $0.03 | $0.03 | |
