| Wheel Rim 75 X 15.8 | Light Bluish Gray
| 3 | | | |
| Sticker Sheet for Set 10269-1 | [No Color/Any Color]
| 1 | | | |
| Brick Round Corner 3 x 3 x 2 Dome Top | Dark Red
| 4 | | | |
| Technic Link, Reinforced, with Beveled Edge | Black
| 45 | | | |
| Barrel 2 x 2 x 2 | Light Bluish Gray
| 4 | | | |
| Tyre 94.3 x 38 Motorcycle Racing Tread | Black
| 1 | | | |
| Tyre 94.2 x 22 Motorcycle Racing Tread, Narrow | Black
| 1 | | | |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | Light Bluish Gray
| 2 | | | |
| Technic Brick 1 x 16 [15 Pin Holes] | Black
| 2 | | | |
| Technic Link 1 x 9 Bent (6 - 4) | Light Bluish Gray
| 2 | | | |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | Light Bluish Gray
| 7 | | | |
| Technic Brick 1 x 1 with Pin Hole | Dark Red
| 4 | | | |
| Brick Round 2 x 2 with Axle Hole | Light Bluish Gray
| 16 | | | |
| Plate 1 x 2 | Light Bluish Gray
| 24 | | | |
| Technic Gear 40 Tooth | Light Bluish Gray
| 1 | | | |
| Tile 2 x 4 with Skew Harley Davidson Logo print | Dark Red
| 1 | | | |
| Slope Curved 2 x 2 x 2/3 | Light Bluish Gray
| 6 | | | |
| Plate 1 x 4 | Light Bluish Gray
| 15 | | | |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | Dark Red
| 2 | | | |
| Plate 1 x 3 | Light Bluish Gray
| 16 | | | |
| Tile 2 x 4 with Skew Harley Davidson Logo print | Dark Red
| 1 | | | |
| Plate 1 x 6 | Black
| 13 | | | |
| Technic Axle and Pin Connector, Perpendicular with Extension | Black
| 1 | | | |
| Technic Brick 1 x 12 [11 Pin Holes] | Black
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Dark Red
| 9 | | | |
| Plate 1 x 3 | Black
| 10 | | | |
| Bracket 1 x 2 - 2 x 4 | Dark Red
| 4 | | | |
| Hinge Plate 2 x 2 Locking with 1 Finger on Top | Dark Red
| 4 | | | |
| Technic Gear 28 Tooth Double Bevel | Light Bluish Gray
| 1 | | | |
| Technic Axle and Pin Connector Angled #4 - 135° | Light Bluish Gray
| 3 | | | |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | Black
| 5 | | | |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | Tan
| 2 | | | |
| Plate 2 x 2 Corner | Light Bluish Gray
| 10 | | | |
| Tile 2 x 2 Curved, Macaroni | Light Bluish Gray
| 8 | | | |
| Plate Round 4 x 4 with 2 x 2 Round Opening | Black
| 6 | | | |
| Technic Link 1 x 9 | Black
| 2 | | | |
| Tile 1 x 3 | Light Bluish Gray
| 6 | | | |
| Plate 1 x 2 | Black
| 14 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Light Bluish Gray
| 6 | | | |
| Technic Pin Connector Round [Slotted] | Light Bluish Gray
| 6 | | | |
| Technic Pin Connector Perpendicular Long | Black
| 3 | | | |
| Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 2] | Dark Bluish Gray
| 2 | | | |
| Technic Axle 12 | Red
| 2 | | | |
| Slope Curved 4 x 2 No Studs | Dark Red
| 3 | | | |
| Wedge Plate 3 x 2 Left | Dark Red
| 2 | | | |
| Brick 1 x 2 | Light Bluish Gray
| 5 | | | |
| Wedge Plate 3 x 2 Right | Dark Red
| 2 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Black
| 5 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Dark Red
| 5 | | | |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | Light Bluish Gray
| 1 | | | |
| Technic Axle and Pin Connector Perpendicular Double 4L | Light Bluish Gray
| 1 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray
| 8 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Dark Red
| 4 | | | |
| Slope Curved 2 x 2 x 2/3 Inverted | Black
| 6 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Dark Red
| 4 | | | |
| Technic Beam 1 x 6 Thin | Black
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Black
| 16 | | | |
| String Reel 2 x 1 x 2 Drum with Axle Hole | Light Bluish Gray
| 4 | | | |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | Black
| 4 | | | |
| Bracket 1 x 1 - 1 x 1 Inverted | Black
| 4 | | | |
| Technic Brick 1 x 8 [7 Pin Holes] | Black
| 2 | | | |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | Black
| 31 | | | |
| Technic Axle and Pin Connector Toggle Joint Smooth | Black
| 2 | | | |
| Technic Brick 1 x 2 [2 Pin Holes] | Black
| 6 | | | |
| Plate 1 x 4 | Blue
| 9 | | | |
| Technic Beam 1 x 3 Thin | Light Bluish Gray
| 4 | | | |
| Technic Gear Rack 1 x 4 | Black
| 2 | | | |
| Plate 1 x 1 | Black
| 8 | | | |
| Plate 2 x 3 | Black
| 7 | | | |
| Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4) | Black
| 1 | | | |
| Tile 1 x 2 with Groove | Black
| 6 | | | |
| Plate 1 x 8 | Dark Red
| 2 | | | |
| Technic Brick 1 x 1 with Pin Hole | Light Bluish Gray
| 8 | | | |
| Brick Curved 2 x 4 No Studs, Curved Top, with Groove | Dark Bluish Gray
| 1 | | | |
| Slope Curved 4 x 2 No Studs | Light Bluish Gray
| 1 | | | |
| Plate 1 x 4 | Black
| 7 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Black
| 3 | | | |
| Technic Pin Connector Round 1L [Beam] | Light Bluish Gray
| 7 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Light Bluish Gray
| 3 | | | |
| Technic Axle Connector Hub with 3 Axles at 120° | Light Bluish Gray
| 2 | | | |
| Tile 2 x 2 with Groove | Light Bluish Gray
| 3 | | | |
| Technic Brick 1 x 8 [7 Pin Holes] | Light Bluish Gray
| 2 | | | |
| Tile 1 x 3 | Black
| 3 | | | |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | Black
| 2 | | | |
| Tile 2 x 2 Curved, Macaroni | Dark Bluish Gray
| 4 | | | |
| Equipment Signal Paddle | Light Bluish Gray
| 2 | | | |
| Technic Brick 1 x 14 [13 Pin Holes] | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | Black
| 9 | | | |
| Slope 30° 1 x 2 x 2/3 | Light Bluish Gray
| 4 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | White
| 4 | | | |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes] | Light Bluish Gray
| 4 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Light Bluish Gray
| 9 | | | |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | Light Bluish Gray
| 2 | | | |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | Black
| 4 | | | |
| Technic Beam 1 x 5 Thin | Yellow
| 2 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Light Bluish Gray
| 10 | | | |
| Tile Round 1 x 1 Half Circle | Trans-Red
| 3 | | | |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | Black
| 4 | | | |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | Black
| 2 | | | |
| Tile Round 2 x 2 with Bottom Stud Holder | Light Bluish Gray
| 5 | | | |
| Brick Special 1 x 1 with Headlight and No Slot | Light Bluish Gray
| 4 | | | |
| Wedge Curved 3 x 4 x 2/3 Cutout | Dark Red
| 1 | | | |
| Tile 1 x 1 with Groove | Black
| 5 | | | |
| Tile 1 x 8 with Groove | Black
| 2 | | | |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | Dark Red
| 4 | | | |
| Slope 18° 4 x 2 | Dark Bluish Gray
| 2 | | | |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | Light Bluish Gray
| 2 | | | |
| Dish 4 x 4 Inverted with Open Stud [Radar] | Trans-Clear
| 1 | | | |
| Plate 1 x 2 | Dark Bluish Gray
| 6 | | | |
| Brick 1 x 4 | Dark Red
| 2 | | | |
| Plate 2 x 2 | Dark Red
| 6 | | | |
| Tile 1 x 6 with Groove | Black
| 2 | | | |
| Technic Axle and Pin Connector Angled #1 | Light Bluish Gray
| 4 | | | |
| Technic Beam 1 x 2 Thick | Black
| 2 | | | |
| Bracket 1 x 2 - 2 x 2 | Dark Red
| 2 | | | |
| Technic Pin 1/2 | Light Bluish Gray
| 10 | | | |
| Plate Special 1 x 2 with Pin Hole on Top | Black
| 6 | | | |
| Wedge Plate 2 x 2 Cut Corner | Black
| 3 | | | |
| Plate Special 1 x 1 Rounded with Handle | Light Bluish Gray
| 2 | | | |
| Wedge 3 x 2 Right | Dark Red
| 2 | | | |
| Technic Gear 16 Tooth Reinforced [New Style] | Light Bluish Gray
| 2 | | | |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Black
| 6 | | | |
| Slope Curved 2 x 1 with Stud Notch Left | Black
| 2 | | | |
| Tile 1 x 4 with Groove | Black
| 3 | | | |
| Slope Curved 2 x 1 with Stud Notch Right | Black
| 2 | | | |
| Brick 1 x 3 | Black
| 2 | | | |
| Technic Axle 10 | Black
| 1 | | | |
| Technic Pin Double with Axle Hole | Black
| 2 | | | |
| Wedge 3 x 2 Left | Dark Red
| 2 | | | |
| Technic Beam 1 x 5 Thin | Light Bluish Gray
| 1 | | | |
| Brick Special 1 x 1 with Stud on 1 Side | Dark Red
| 2 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Black
| 4 | | | |
| Technic Brick 1 x 6 [5 Pin Holes] | Black
| 2 | | | |
| Slope Curved 2 x 2 x 2/3 | Black
| 4 | | | |
| Plate 1 x 3 | Tan
| 6 | | | |
| Wedge Sloped 45° 3 x 3 Right | Dark Red
| 2 | | | |
| Wedge Sloped 45° 3 x 3 Left | Dark Red
| 2 | | | |
| Plate 1 x 4 | Dark Red
| 4 | | | |
| Plate 2 x 6 | Dark Red
| 3 | | | |
| Plate 4 x 6 | Black
| 1 | | | |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | Blue
| 9 | | | |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | Black
| 2 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Dark Red
| 2 | | | |
| Bar Holder with Hole and Bar Handle | Light Bluish Gray
| 2 | | | |
| Technic Disc 3 x 3 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 4 | Dark Bluish Gray
| 3 | | | |
| Brick Round 1 x 1 Open Stud | Light Bluish Gray
| 4 | | | |
| Engine Smooth Large [2 x 2 Thin Top Plate] | Light Bluish Gray
| 2 | | | |
| Technic Engine Crankshaft | Light Bluish Gray
| 2 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray
| 8 | | | |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | Sand Blue
| 4 | | | |
| Technic Beam 1 x 3 Thick | Black
| 3 | | | |
| Plate Special 1 x 2 with Pin Hole Underneath | Light Bluish Gray
| 7 | | | |
| Arm Skeleton [Bent / 2 Clips] | Black
| 2 | | | |
| Tile 1 x 1 with Groove | Light Bluish Gray
| 3 | | | |
| Brick Special 1 x 4 with 4 Studs on One Side | Light Bluish Gray
| 2 | | | |
| Technic Pin Connector Round 1L [Beam] | Black
| 4 | | | |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | Light Bluish Gray
| 3 | | | |
| Technic Pin Connector Hub with 1 Axle | Black
| 1 | | | |
| Slope Curved 2 x 1 Inverted | Black
| 2 | | | |
| Plate Special 1 x 2 with Clip Horizontal on End | Black
| 6 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Black
| 3 | | | |
| Technic Gear 8 Tooth [Reinforced] | Dark Bluish Gray
| 2 | | | |
| Plate 1 x 6 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 4 | Tan
| 4 | | | |
| Brick 1 x 2 | Black
| 3 | | | |
| Antenna 1 x 4 with Flat Top | Light Bluish Gray
| 4 | | | |
| Plate 1 x 2 | Yellow
| 6 | | | |
| Plate 1 x 1 | Light Bluish Gray
| 4 | | | |
| Wedge Curved 4 x 3 No Studs [Plain] | Dark Red
| 2 | | | |
| Brick 2 x 4 | Dark Bluish Gray
| 1 | | | |
| Tile 2 x 3 | Light Bluish Gray
| 1 | | | |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | Light Bluish Gray
| 5 | | | |
| Technic Pin Connector Plate with One Hole (Single on Bottom) | Black
| 2 | | | |
| Window 1 x 4 x 3 without Shutter Tabs | Black
| 1 | | | |
| Brick 1 x 4 | Yellow
| 2 | | | |
| Plate Round Corners 2 x 6 Double | Black
| 2 | | | |
| Plate 2 x 2 | Black
| 4 | | | |
| Technic Pin Connector Round [Slotted] | Black
| 2 | | | |
| Tile 2 x 3 | Black
| 1 | | | |
| Tile Round 1 x 1 Quarter | Dark Bluish Gray
| 5 | | | |
| Technic Beam 1 x 9 Thick | Black
| 1 | | | |
| Technic Axle 2 Notched | Red
| 10 | | | |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | Black
| 4 | | | |
| Technic Axle 8 | Black
| 1 | | | |
| Technic Bush | Light Bluish Gray
| 5 | | | |
| Slope Curved 2 x 2 x 2/3 | Dark Red
| 2 | | | |
| Brick 1 x 1 | Light Bluish Gray
| 2 | | | |
| Slope 30° 1 x 2 x 2/3 | Black
| 3 | | | |
| Wedge Plate 2 x 2 Cut Corner | Light Bluish Gray
| 2 | | | |
| Plate Round 1 x 1 with Open Stud | Red
| 3 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Dark Red
| 3 | | | |
| Plate Round 4 x 4 with Pin Hole | Light Bluish Gray
| 2 | | | |
| Plate 1 x 3 | Dark Red
| 2 | | | |
| Bracket 1 x 1 - 1 x 1 | Light Bluish Gray
| 2 | | | |
| Tile Round 1 x 1 | Light Bluish Gray
| 4 | | | |
| Hinge Tile 1 x 3 Locking with 1 Finger on Top | Black
| 1 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Black
| 5 | | | |
| Slope 45° 2 x 3 | Black
| 1 | | | |
| Plate Round Corners 2 x 6 Double | Light Bluish Gray
| 2 | | | |
| Plate Round 1 x 1 with Solid Stud | Trans-Orange
| 5 | | | |
| Plate Special 1 x 2 with End Towball | Dark Bluish Gray
| 2 | | | |
| Brick 2 x 2 | Black
| 2 | | | |
| Brick 1 x 1 | Dark Red
| 2 | | | |
| Technic Axle 6 | Black
| 2 | | | |
| Plate 1 x 6 | Dark Red
| 2 | | | |
| Cone 1 x 1 [Top Groove] | Light Bluish Gray
| 4 | | | |
| Technic Pin Connector 3L with 2 Pins and Center Hole | Black
| 2 | | | |
| Plate 1 x 1 | Dark Red
| 3 | | | |
| Tile Special 1 x 2 Grille with Bottom Groove | Dark Bluish Gray
| 4 | | | |
| Bar 3L | Black
| 2 | | | |
| Bracket 1 x 2 - 1 x 2 Inverted | Light Bluish Gray
| 2 | | | |
| Slope Curved 4 x 1 Double with No Studs | Light Bluish Gray
| 1 | | | |
| Slope Curved 2 x 1 Inverted | Light Bluish Gray
| 2 | | | |
| Plate Special 4 x 4 with 2 x 2 Opening | Light Bluish Gray
| 2 | | | |
| Slope 45° 2 x 1 with Bottom Pin | Dark Red
| 4 | | | |
| Tile Round 1 x 1 | Black
| 3 | | | |
| Plate Special 1 x 2 [Top Clip] | Black
| 4 | | | |
| Bar 4L (Lightsaber Blade / Wand) | Black
| 2 | | | |
| Plate Special 1 x 2 Rounded with 2 Open Studs | Light Bluish Gray
| 2 | | | |
| Plate 2 x 3 | Blue
| 3 | | | |
| Plate 2 x 4 | Light Bluish Gray
| 2 | | | |
| Plate 2 x 10 | Dark Bluish Gray
| 1 | | | |
| Technic Axle and Pin Connector Angled #5 - 112.5° | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | Light Bluish Gray
| 4 | | | |
| Plate 2 x 4 | Black
| 2 | | | |
| Technic Pin 1/2 | Blue
| 6 | | | |
| Plate 4 x 4 | Black
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Black
| 1 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Light Bluish Gray
| 3 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | Black
| 2 | | | |
| Technic Brick 1 x 4 [3 Pin Holes] | Light Bluish Gray
| 1 | | | |
| Technic Pin Connector Round 1L [Beam] | White
| 3 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Black
| 4 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Black
| 4 | | | |
| Technic Beam 3 x 5 L-Shape Thick | Black
| 2 | | | |
| Tile 1 x 2 with Groove | Light Bluish Gray
| 1 | | | |
| Technic Beam 1 x 5 Thin with Axle Holes on Ends | Light Bluish Gray
| 1 | | | |
| Technic Axle 7 | Light Bluish Gray
| 2 | | | |
| Technic Brick 1 x 2 [1 Pin Hole] | Red
| 3 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black
| 3 | | | |
| Plate 1 x 2 | Dark Red
| 3 | | | |
| Technic Axle 2 Notched | Black
| 2 | | | |
| Tile 1 x 4 with Groove | Dark Red
| 1 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | Black
| 1 | | | |
| Brick and Axle Separator v2.0 | Orange
| 1 | | | |
| Bracket 1 x 2 - 2 x 2 | Black
| 2 | | | |
| Technic Axle 5 with Stop | Reddish Brown
| 3 | | | |
| Lever Small Base with Black Lever | Black
| 3 | | | |
| Plate Round 4 x 4 with Pin Hole | Black
| 1 | | | |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | Light Bluish Gray
| 1 | | | |
| Technic Axle Pin with Friction Ridges Lengthwise | Blue
| 6 | | | |
| Pneumatic Hose Connector with Axle Connector | Dark Bluish Gray
| 2 | | | |
| Technic Axle 3 | Light Bluish Gray
| 5 | | | |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | Light Bluish Gray
| 2 | | | |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | Light Bluish Gray
| 4 | | | |
| Technic Beam 1 x 5 Thick | Red
| 1 | | | |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Yellow
| 3 | | | |
| Technic Pin without Friction Ridges Lengthwise | Light Bluish Gray
| 3 | | | |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | Black
| 2 | | | |
| Technic Axle Connector Smooth [with x Hole + Orientation] | Black
| 2 | | | |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth | Light Bluish Gray
| 2 | | | |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Black
| 1 | | | |
| Technic Beam 1 x 7 Thick | Yellow
| 1 | | | |
| Technic Pin 3/4 | Tan
| 3 | | | |
| Slope 45° 2 x 1 with 2/3 Cutout [New Version] | Black
| 2 | | | |
| Technic Pin Connector Hub with 2 Perpendicular Axles | Black
| 1 | | | |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | Black
| 2 | | | |
| Slope 45° 2 x 2 | Light Bluish Gray
| 1 | | | |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Yellow
| 3 | | | |
| Technic Beam 2 x 4 L-Shape Thick | Black
| 2 | | | |
| Plate Round Corner 3 x 3 | Black
| 1 | | | |
| Panel 1 x 1 x 1 Corner | Black
| 1 | | | |
| Technic Pin with Friction Ridges Lengthwise and Towball | Black
| 2 | | | |
| Plate 2 x 2 with 2 Pins | Dark Bluish Gray
| 2 | | | |
| Brick Arch 1 x 4 | Black
| 1 | | | |
| Technic Beam 1 x 5 Thick | Black
| 1 | | | |
| Tile 1 x 2 with Groove | Trans-Red
| 1 | | | |
| Technic Axle 4 with Stop | Dark Bluish Gray
| 2 | | | |
| Technic Beam 1 x 3 Thick | Red
| 1 | | | |
| Technic Axle 5 | Yellow
| 2 | | | |
| Technic Disc 3 x 3 | Black
| 1 | | | |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | Black
| 1 | | | |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Red
| 2 | | | |
| Plate Special 2 x 2 with Pin on Bottom | Dark Tan
| 2 | | | |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | Yellow
| 1 | | | |
| Technic Brick 1 x 2 [2 Pin Holes] | Light Bluish Gray
| 1 | | | |
| Technic Axle and Pin Connector Perpendicular | Black
| 1 | | | |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | Black
| 2 | | | |
| Technic Axle 3 with Stop | Reddish Brown
| 1 | | | |
| Tile Special 2 x 2 with Top Pin | Light Bluish Gray
| 1 | | | |
| Technic Axle 4 | Red
| 1 | | | |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | Light Bluish Gray
| 1 | | | |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 Side Handle [Free Ends] | Dark Bluish Gray
| 1 | | | |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | Dark Bluish Gray
| 1 | | | |
| Technic Axle 3 with Stud | Dark Tan
| 1 | | | |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Light Bluish Gray
| 1 | | | |
| Cone 1 x 1 [Top Groove] | Black
| 1 | | | |
| Plate Special 1 x 2 5.9mm Centre Side Cup | Light Bluish Gray
| 1 | | | |
| Plate Special 1 x 4 with Bar Down | Light Bluish Gray
| 1 | | | |
| Technic Axle 5.5 with Stop [Rounded Short End] | Dark Bluish Gray
| 1 | | | |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | Red
| 1 | | | |