 | Geode / Rock with Trans-Light Blue Crystal Pattern  | Dark Bluish Gray
| 2 | | | |
 | Wing, Tail 4 x 1 x 3  | Light Bluish Gray
| 2 | | | |
 | Hips and Bright Light Orange Legs with Dark Azure Straps, Dark Orange Knee Pads Print  | Dark Azure
| 1 | | | |
 | Plate 1 x 2  | Trans-Light Blue
| 12 | | | |
![Image of part Rubber Belt Small [15mm ID] [Round Cross Section]](https://cdn.rebrickable.com/media/parts/elements/4544140.jpg) | Rubber Belt Small [15mm ID] [Round Cross Section]  | White
| 1 | | | |
 | Torso Spacesuit, Classic Space Logo, Dark Azure Trim Print, Bright Light Orange Arms, Dark Azure Hands  | Bright Light Orange
| 1 | | | |
![Image of part Flag 2 x 2 Square, Flared Clip Edge [Thick Clips] with Classic Space Logo Print](https://cdn.rebrickable.com/media/parts/elements/6317066.jpg) | Flag 2 x 2 Square, Flared Clip Edge [Thick Clips] with Classic Space Logo Print  | White
| 1 | | | |
 | Torso Jacket, Zipper, Classic Space Logo, Silver Pilot Wings Badge Print, Dark Azure Arms, Yellow Hands  | Dark Azure
| 1 | | | |
 | Windscreen 7 x 4 x 2 Round with Handle  | Trans-Light Blue
| 2 | | | |
 | Torso, Dual Molded Arms, Spacesuit, Silver Belt, Red Buttons, Light Bluish Gray Trim Print, Dark Azure Sleeves Pattern, White Arms and Hands  | White
| 1 | | | |
 | Tile Special 2 x 3 Pentagonal  | Dark Azure
| 2 | | | |
 | Minifig Head, Dark Brown Eyebrows, Glasses, Open Mouth Smile with Teeth Print  | Yellow
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3 with Classic Space Logo Print  | White
| 1 | | | |
 | Hinge Tile 1 x 3 Locking with 1 Finger on Top with Cutout  | Light Bluish Gray
| 2 | | | |
 | Tile 2 x 6  | Dark Azure
| 2 | | | |
 | Hair Coiled, Straight Sides  | Dark Brown
| 1 | | | |
 | Plate 1 x 8  | Light Bluish Gray
| 4 | | | |
 | Hips and Dark Azure Legs  | Dark Azure
| 1 | | | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/6399650.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]  | Yellow
| 1 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Dark Tan
| 4 | | | |
 | Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End)  | Yellow
| 2 | | | |
 | Wedge Sloped 45° 2 x 2 Corner  | Dark Bluish Gray
| 6 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6208446.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Flat Silver
| 6 | | | |
 | Wedge Plate 7 x 6 Boat Bow with Stud Notches  | Light Bluish Gray
| 1 | | | |
 | Helmet Space, Black Neck Pattern  | White
| 1 | | | |
 | Helmet Space, Black Neck Pattern  | White
| 1 | | | |
 | Engine, Strakes, 2 x 2 Thin Top Plate  | Pearl Titanium
| 2 | | | |
 | Hair Mid-Length Swept Sideways  | Black
| 1 | | | |
 | Hips and White Legs with Red Line/Triangle Print  | Dark Azure
| 1 | | | |
 | Minifig Head Ronny, Eyebrows, Crow's Feet, Open Mouth Smile / Queasy Face with Sweat Drop Print  | Yellow
| 1 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6093859.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 6  | Dark Blue
| 7 | | | |
 | Antenna 1 x 4 with Flat Top  | Yellow
| 2 | | | |
 | Slope 65° 2 x 1 x 2  | Dark Bluish Gray
| 2 | | | |
 | Minifig Head, Thin Eyebrows, Eyelashes, White Pupils and Peach Lips Smile Print  | Yellow
| 1 | | | |
 | Hair Spiked  | Medium Nougat
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6390119.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Dark Blue
| 1 | | | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6024715.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | Yellow
| 2 | | | |
 | Wave / Flame Rounded with Base Rim  | Glitter Trans-Light Blue
| 4 | | | |
 | Slope Curved 3 x 1 No Studs  | White
| 4 | | | |
 | Slope 45° 2 x 2 with Computer Screen, Lever Print  | White
| 1 | | | |
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211787.jpg) | Dish 3 x 3 Inverted [Radar]  | Light Bluish Gray
| 2 | | | |
 | Grap Claw with Axle  | Dark Azure
| 2 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Black
| 2 | | | |
 | Minifig Neckwear Front Harness with 4 Back Studs  | Dark Azure
| 1 | | | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Yellow
| 3 | | | |
 | Tile Special 2 x 3 with 2 Clips without Tab between Clips with Solar Panel print  | Dark Blue
| 2 | | | |
 | Tile Special 2 x 3 Pentagonal  | White
| 2 | | | |
 | Equipment Net  | Medium Nougat
| 1 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6271127.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]  | Dark Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with 5.9mm Towball Socket and Towball  | Dark Bluish Gray
| 4 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Trans-Light Blue
| 2 | | | |
 | Wedge Plate 2 x 2 Cut Corner  | Yellow
| 2 | | | |
 | Brick 1 x 4  | White
| 2 | | | |
 | Wave / Flame Rounded Large with Marbled Trans-Yellow Pattern  | Trans-Red
| 2 | | | |
![Image of part Windscreen 7 x 4 x 1 2/3 with Hinges [7 Teeth]](https://cdn.rebrickable.com/media/parts/elements/6400252.jpg) | Windscreen 7 x 4 x 1 2/3 with Hinges [7 Teeth]  | White
| 1 | | | |
 | Plate 2 x 12  | Light Bluish Gray
| 1 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | White
| 4 | | | |
 | Tile Round 1 x 1  | Black
| 5 | | | |
 | Helmet Underwater / Space, Breathing Apparatus  | White
| 1 | | | |
 | Slope Curved 2 x 2 with Lip, No Studs  | White
| 2 | | | |
 | Hinge Brick 1 x 2 Base  | White
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Orange
| 3 | | | |
 | Tile Round 1 x 1 with Gauge Print  | Light Bluish Gray
| 2 | | | |
 | Weapon Gun / Blaster with Studs on Side  | White
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/6109454.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Orange
| 4 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6137300.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Dark Azure
| 4 | | | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6249091.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | White
| 4 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4585493.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Pearl Gold
| 4 | | | |
 | Slope 30° 1 x 1 x 2/3 with Two Rounded White Squares Print  | Trans-Dark Blue
| 2 | | | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3  | Light Bluish Gray
| 2 | | | |
 | Bucket 1 x 1 x 1 Handle  | Black
| 2 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Light Bluish Gray
| 3 | | | |
 | Plate 1 x 4  | Yellow
| 3 | | | |
 | Brick Special 1 x 2 with Studs on 2 Sides  | White
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/4609766.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Metallic Gold
| 1 | | | |
 | Wave / Flame Small with Pin  | Trans-Light Blue
| 2 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Light Blue
| 4 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | White
| 4 | | | |
 | Wheel Skateboard / Trolley  | Black
| 4 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Dark Azure
| 3 | | | |
 | Brick Special 1 x 2 x 2/3 with Studs on Sides  | Black
| 2 | | | |
 | Cone 3 x 3 x 2  | Black
| 2 | | | |
 | Support Round 2 x 2 x 2 Stand with Reinforced Underside  | Dark Bluish Gray
| 3 | | | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with End Towball  | Dark Bluish Gray
| 2 | | | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom  | Black
| 4 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Light Bluish Gray
| 4 | | | |
 | Brick Special 1 x 1 Studs on 4 Sides  | Dark Bluish Gray
| 1 | | | |
 | Brick 2 x 4  | Medium Nougat
| 1 | | | |
 | Bucket 1 x 1 x 1  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Black
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Azure
| 2 | | | |
 | Brick Round 2 x 2 Truncated Cone  | Black
| 2 | | | |
 | Brick and Axle Separator v2.0  | Orange
| 1 | | | |
 | Slope 45° 2 x 2 with Computer Screen, with Crosshairs print  | White
| 1 | | | |
 | Wedge Plate 4 x 6  | White
| 1 | | | |
 | Equipment Metal Detector, no Stud on Search Head  | Black
| 1 | | | |
 | Wedge Plate 6 x 3 Left  | Black
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Light Bluish Gray
| 2 | | | |
 | Wave / Flame Rounded with Base Rim  | Trans-Orange
| 4 | | | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L  | Black
| 2 | | | |
 | Slope Curved 4 x 1 Inverted  | Black
| 2 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Black
| 4 | | | |
 | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes  | Black
| 2 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529247.jpg) | Cone 1 x 1 [Top Groove]  | Pearl Gold
| 4 | | | |
 | Wheel Holder, Plate, Round 2 x 2 Thin with Clips  | Light Bluish Gray
| 4 | | | |
 | Wedge Plate 6 x 3 Right  | Black
| 2 | | | |
 | Engine / Air Scoop 2 x 2  | Flat Silver
| 2 | | | |
 | Plant, Banana  | Yellow
| 1 | | | |
 | Wedge Sloped Inverted 6 x 6 x 1 Triple  | Black
| 1 | | | |
![Image of part Food Turkey Drumstick [Long] - 22mm Oval Opening](https://cdn.rebrickable.com/media/parts/elements/6247204.jpg) | Food Turkey Drumstick [Long] - 22mm Oval Opening  | Dark Orange
| 1 | | | |
 | Bar Holder with Clip  | Black
| 1 | | | |
 | Brick 1 x 2 without Bottom Tube  | Trans-Light Blue
| 1 | | | |
 | Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed  | Yellow
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Yellow
| 3 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Dark Tan
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Red
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Azure
| 2 | | | |
 | Engine, Smooth Small, 1 x 2 Side Plate with Axle Holders and Slot  | Dark Bluish Gray
| 2 | | | |
 | Lever Small Base with Black Lever  | Blue
| 3 | | | |
 | Tool Screwdriver and Spanner / Wrench  | Flat Silver
| 1 | | | |
 | Brick Round 2 x 2 Dome Top, Hollow Stud  | Red
| 1 | | | |
 | Tool Jackhammer / Motor Hammer  | Dark Bluish Gray
| 1 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029946.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Red
| 1 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Black
| 1 | | | |
 | Plate Special 1 x 4 with Angled Tubes  | Flat Silver
| 2 | | | |
 | Tail Shuttle - Small  | White
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Azure
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Yellow
| 2 | | | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/383901.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]  | White
| 2 | | | |
 | Plate 1 x 2  | White
| 1 | | | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512363.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation]  | Black
| 1 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Yellow
| 2 | | | |
 | Plate Special 1 x 4 Offset with Bar Holes  | Dark Bluish Gray
| 2 | | | |
 | Antenna 1 x 4 with Flat Top  | Light Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Red
| 1 | | | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg) | Equipment Cup / Mug [Plain]  | Red
| 1 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515364.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | White
| 1 | | | |
 | Plate 2 x 2  | Yellow
| 1 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Dark Tan
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Brown
| 1 | | | |
 | Wedge Plate 4 x 6  | Black
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Brown
| 1 | | | |
 | Technic Axle Towball  | Light Bluish Gray
| 1 | | | |