 | Net 10 x 10 Square  | Black
| 1 | | | |
![Image of part Torso, Pearl Gold Arms and Hands [Plain]](https://cdn.rebrickable.com/media/parts/elements/6253290.jpg) | Torso, Pearl Gold Arms and Hands [Plain]  | Pearl Gold
| 1 | | | |
 | Minifig Neckwear Breathing Apparatus, Aviator Oxygen Mask  | Light Bluish Gray
| 1 | | | |
 | Minifig Neckwear Breathing Apparatus, Aviator Oxygen Mask  | Light Bluish Gray
| 1 | | | |
 | Hips and Olive Green Legs  | Olive Green
| 1 | | | |
 | Hips and Pearl Gold Legs  | Pearl Gold
| 1 | | | |
![Image of part Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6035405.jpg) | Brick Curved 10 x 1 [Symmetric Inside Ridges]  | White
| 2 | | | |
![Image of part Minifig Head Ferrari Engineer (Pit Crew) / Pirate, Beard Black Angular, Pupils, Teeth Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6112620.jpg) | Minifig Head Ferrari Engineer (Pit Crew) / Pirate, Beard Black Angular, Pupils, Teeth Print [Hollow Stud]  | Yellow
| 1 | | | |
 | Torso Safety Vest with Reflective Stripes, Reddish Brown Shirt, Belt with Pouches and Pliers Print, Reddish Brown Arms, Dark Bluish Gray Hands  | Orange
| 1 | | | |
 | Minifig Head Samurapper, Eyebrows and Scowl, White Pupils Print  | Yellow
| 1 | | | |
 | Torso Jacket with White Undershirt, Pockets and Red Pen, with 2 Orange Stripes Print, Blue Arms, Yellow Hands  | Blue
| 1 | | | |
 | Large Figure Weapon Claw, with Clip  | Flat Silver
| 4 | | | |
 | Equipment Hand Truck / Sack Barrow Frame  | Red
| 1 | | | |
 | Plate 4 x 12  | Light Bluish Gray
| 1 | | | |
 | Torso Fire Jacket, Green/Dark Bluish Gray Stripes, Pockets, Dark Blue Belt, Buckle, White Shirt Print, Bright Light Orange Arms, Dark Bluish Gray Hands  | Bright Light Orange
| 1 | | | |
 | Helmet Fire  | Metallic Gold
| 1 | | | |
 | Torso Prison Shirt, '86753', Dual Sided Dark Bluish Gray Stripes over Dark Tan Undershirt Print, White Arms, Yellow Hands  | White
| 1 | | | |
 | Knitted Cap  | Dark Blue
| 1 | | | |
![Image of part Minifig Head, Beard Stubble, Raised Eyebrow, White Pupils Print, Stubble Goatee [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6218310.jpg) | Minifig Head, Beard Stubble, Raised Eyebrow, White Pupils Print, Stubble Goatee [Hollow Stud]  | Yellow
| 1 | | | |
 | Torso Shirt under Bulletproof Vest with Police Badge and Pouches Print, Bright Light Blue Arms, Black Hands  | Bright Light Blue
| 1 | | | |
![Image of part Minifig Head Hero / Pit Crew, Orange Sunglasses with Nose Piece, Smile and Chin Dimple Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/4652361.jpg) | Minifig Head Hero / Pit Crew, Orange Sunglasses with Nose Piece, Smile and Chin Dimple Print [Hollow Stud]  | Yellow
| 1 | | | |
 | Brick Special 1 x 2 with Groove  | Reddish Brown
| 5 | | | |
 | Hips and Bright Light Orange Legs with Overall, Green Knee Pads  | Bright Light Orange
| 1 | | | |
 | Hips and White Legs with Dark Bluish Gray Prison Stripes  | White
| 1 | | | |
 | Plate 6 x 6  | Blue
| 2 | | | |
 | Minifig Head, Angry Eyebrows and Scowl with Open Mouth, Headset, White Pupils Print  | Yellow
| 1 | | | |
 | Hips and Bright Light Blue Legs with Black Safety Belt/Harness Print  | Black
| 1 | | | |
 | Helmet, Construction / Hard Hat, Black Ear Protector / Headphones Pattern  | Red
| 1 | | | |
 | Windscreen 7 x 4 x 2 Round with Handle  | Trans-Light Blue
| 1 | | | |
 | Launcher, Net Shooter Canister  | Light Bluish Gray
| 1 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6173168.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Dark Red
| 4 | | | |
 | Headwear Accessory Visor  | Trans-Light Blue
| 1 | | | |
 | Technic Link 1 x 9 Bent (6 - 4)  | Dark Bluish Gray
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Dark Bluish Gray
| 4 | | | |
 | Tyre 24 x 12 R Balloon  | Black
| 4 | | | |
 | Plate Special 2 x 2 with Wheel Holder  | Light Bluish Gray
| 4 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Blue
| 4 | | | |
 | Construction Vehicle Bucket 3 x 6 with 7 Hinge Teeth  | Black
| 1 | | | |
 | Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate  | Dark Bluish Gray
| 2 | | | |
 | Picket Fence 1 x 4 x 2  | Reddish Brown
| 1 | | | |
 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar  | Dark Blue
| 1 | | | |
 | Tile 1 x 6 with Groove  | Blue
| 2 | | | |
 | Launcher 4 x 2 x 1 with Bottom Axle  | White
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3 Inverted  | White
| 2 | | | |
 | Brick 1 x 4  | Red
| 3 | | | |
 | Slope 30° 1 x 2 x 2/3 with 2 Gauges print  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 10  | Light Bluish Gray
| 1 | | | |
 | Tile 1 x 3  | Dark Blue
| 2 | | | |
 | Knitted Cap  | Dark Red
| 1 | | | |
 | Bar 3L  | Light Bluish Gray
| 3 | | | |
 | Helmet Fire  | Red
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Clear
| 5 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 5 | | | |
 | Plate 1 x 2  | White
| 5 | | | |
 | Brick 2 x 6  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 6  | Yellow
| 2 | | | |
 | Plate 1 x 3  | Black
| 2 | | | |
 | Plate 1 x 3  | Black
| 2 | | | |
 | Plate 4 x 6  | Yellow
| 1 | | | |
![Image of part Minifig Head [Plain] [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/4621352.jpg) | Minifig Head [Plain] [Hollow Stud]  | Pearl Gold
| 1 | | | |
![Image of part Helmet, Sports [Plain]](https://cdn.rebrickable.com/media/parts/elements/6252744.jpg) | Helmet, Sports [Plain]  | White
| 1 | | | |
 | Plate 2 x 14  | Dark Blue
| 1 | | | |
 | Plate 2 x 4  | White
| 2 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 2 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370101.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | White
| 2 | | | |
 | Brick 2 x 4  | Dark Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | Light Bluish Gray
| 1 | | | |
 | Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes  | Yellow
| 1 | | | |
 | Tail Shuttle with Sky Police Logo print  | White
| 1 | | | |
 | Launcher Firing Pin, Net Shooter  | Dark Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211541.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 2  | Reddish Brown
| 4 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Black
| 4 | | | |
 | Plate 1 x 8  | Bright Light Yellow
| 2 | | | |
 | Brick Curved 6 x 1  | Red
| 2 | | | |
 | Bracket 1 x 2 - 1 x 2  | Orange
| 2 | | | |
 | Tile Round 1 x 1  | Olive Green
| 3 | | | |
 | Slope 30° 1 x 2 x 2/3 with Buttons And Red Screens Print  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 with Axle Hole  | White
| 2 | | | |
 | Bracket 1 x 2 - 1 x 2  | Black
| 2 | | | |
 | Slope Curved 2 x 2 x 2/3  | Dark Red
| 2 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 7 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | White
| 1 | | | |
 | Plate 2 x 10  | Yellow
| 1 | | | |
 | Tile Special 2 x 2 with Bar and Open Stud with Stop Ring (Flag Pole)  | White
| 1 | | | |
 | Plate 2 x 12  | Reddish Brown
| 1 | | | |
 | Minifig Neckwear Life Jacket  | Orange
| 1 | | | |
![Image of part Wedge 3 x 4 [Stud Notches]](https://cdn.rebrickable.com/media/parts/elements/4622604.jpg) | Wedge 3 x 4 [Stud Notches]  | Blue
| 1 | | | |
 | Plate 4 x 6  | Dark Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Dark Blue
| 3 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6100030.jpg) | Technic Pin Connector Round 1L [Beam]  | Dark Bluish Gray
| 3 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Black
| 2 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4211743.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | Light Bluish Gray
| 4 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Reddish Brown
| 3 | | | |
 | Tile Round 1 x 1  | Trans-Dark Blue
| 3 | | | |
 | Propeller 3 Blades 5 Diameter, Pin Hole  | Black
| 4 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529236.jpg) | Cone 1 x 1 [Top Groove]  | Black
| 4 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515368.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Black
| 4 | | | |
 | Brick 1 x 1  | White
| 2 | | | |
 | Plate 1 x 2  | Trans-Orange
| 3 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4594238.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]  | Light Bluish Gray
| 4 | | | |
 | Wedge Curved Inverted 6 x 4  | White
| 2 | | | |
 | Tile 2 x 2 with Groove  | Dark Bluish Gray
| 1 | | | |
 | Brick 2 x 4  | White
| 1 | | | |
 | Road Sign Clip-on 2.2 x 2.667 Triangular  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Yellow
| 1 | | | |
 | Roll Cage 6 x 4 x 3 1/3  | Black
| 1 | | | |
 | Tile 2 x 2 with Groove  | Black
| 1 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 2 | | | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 5 | | | |
 | Plate 2 x 4  | Black
| 2 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6055065.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Blue
| 2 | | | |
 | Technic Beam 1 x 3 Thick  | White
| 2 | | | |
 | Plate 1 x 6  | Yellow
| 2 | | | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Dark Bluish Gray
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Black
| 2 | | | |
 | Wedge Plate 4 x 4 with 2 x 2 Cutout  | Dark Blue
| 2 | | | |
 | Slope Curved 2 x 2 x 2/3  | Black
| 2 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | White
| 2 | | | |
 | Plate Special 1 x 2 with Ladder  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 4 x 4 Centre Hole  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2, Pin Holes  | White
| 1 | | | |
 | Plate 1 x 2  | Red
| 3 | | | |
 | Plate 1 x 1  | Trans-Orange
| 3 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6177114.jpg) | Technic Pin Connector Round 1L [Beam]  | White
| 3 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 3 | | | |
 | Plate Round Corners 2 x 6 Double  | Red
| 1 | | | |
 | Windscreen 3 x 6 x 1 Curved with Rectangular Stud Holder in Bottom  | Trans-Light Blue
| 1 | | | |
![Image of part Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg) | Technic Gear 8 Tooth [Reinforced]  | Dark Bluish Gray
| 1 | | | |
 | Plate Round Corners 2 x 6 Double  | Bright Light Yellow
| 1 | | | |
 | Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 1 Support Wall on Bottom  | Black
| 1 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | Yellow
| 1 | | | |
 | Plate 1 x 1  | White
| 2 | | | |
 | Wave / Flame Rounded with Base Rim  | Trans-Orange
| 4 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Green
| 2 | | | |
 | Brick 1 x 2  | Red
| 2 | | | |
 | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin  | Yellow
| 4 | | | |
 | Slope 30° 1 x 2 x 2/3  | Yellow
| 2 | | | |
 | Brick 1 x 2  | Blue
| 2 | | | |
 | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots  | Blue
| 4 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6034044.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | White
| 2 | | | |
 | Hinge Plate 1 x 8 Locking with Angled Side Extensions, Squared Plate Underside, 7 Teeth  | Black
| 2 | | | |
 | Tile Round 1 x 1  | Trans-Red
| 4 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366026.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Black
| 1 | | | |
 | Technic Pin Connector Plate with One Hole (Single on Bottom)  | Black
| 1 | | | |
 | Plate 2 x 6  | Green
| 1 | | | |
 | Tile 1 x 2 with Groove  | Dark Bluish Gray
| 1 | | | |
 | Jet Engine Fan with 10 Blades and Technic Pin  | Black
| 1 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Yellow
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Black
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Red
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | White
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | White
| 2 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515369.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Light Bluish Gray
| 2 | | | |
 | Plate 1 x 2  | Yellow
| 2 | | | |
 | Tile 1 x 1 with Groove  | Trans-Red
| 3 | | | |
 | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots  | Blue
| 3 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598526.jpg) | Plate Special 1 x 2 [Top Clip]  | Light Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Reddish Brown
| 2 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | White
| 1 | | | |
 | Tile Round 1 x 1  | Trans-Green
| 2 | | | |
 | Equipment Handcuffs  | Light Bluish Gray
| 2 | | | |
 | Tap 1 x 1 without Hole in Spout  | Pearl Gold
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6337268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598527.jpg) | Plate Special 1 x 2 [Top Clip]  | White
| 2 | | | |
 | Wedge Plate 6 x 3 Left  | Blue
| 1 | | | |
 | Plate Round Corners 2 x 6 Double  | White
| 1 | | | |
 | Plate 1 x 4  | White
| 1 | | | |
 | Plate 1 x 2  | Blue
| 2 | | | |
 | Slope Curved 2 x 2 with Lip, No Studs  | Black
| 1 | | | |
 | Technic Axle and Pin Connector Angled #1  | White
| 1 | | | |
 | Plate 2 x 4  | Yellow
| 1 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Black
| 1 | | | |
 | Tool Jackhammer / Motor Hammer  | Dark Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | Black
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3  | White
| 1 | | | |
 | Plate 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4214760.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Yellow
| 1 | | | |
 | Plate 2 x 2  | Dark Red
| 1 | | | |
 | Wedge Plate 6 x 3 Right  | Blue
| 1 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Red
| 1 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Dark Bluish Gray
| 2 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4211180.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | Reddish Brown
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Yellow
| 2 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Reddish Brown
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Green
| 1 | | | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/383926.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]  | Black
| 2 | | | |
 | Bracket 3 x 2 x 1 1/3 with Pin Bottom  | Dark Blue
| 1 | | | |
 | Helicopter Skid Rails 12 x 6  | Dark Bluish Gray
| 1 | | | |
![Image of part Brick Special 1 x 2 with Vertical Clip [Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4117061.jpg) | Brick Special 1 x 2 with Vertical Clip [Open O Clip]  | White
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On Top  | Dark Bluish Gray
| 2 | | | |
 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole  | Black
| 1 | | | |
 | Lever Small Base with Black Lever  | Yellow
| 2 | | | |
 | Technic Axle 3 with Stop  | Reddish Brown
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Bluish Gray
| 1 | | | |
![Image of part Equipment Radio [Extended Handle, Expanded Speaker Grille]](https://cdn.rebrickable.com/media/parts/elements/6100054.jpg) | Equipment Radio [Extended Handle, Expanded Speaker Grille]  | Black
| 1 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 1 | | | |
 | Wheel Skateboard / Trolley  | Black
| 1 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | White
| 1 | | | |
 | Technic Pin Long without Friction Ridges  | Tan
| 1 | | | |
 | Wedge Plate 4 x 6 Cut Corners  | Black
| 1 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146219.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | Yellow
| 1 | | | |
 | Plate Special 2 x 2 with 2 Pin Holes  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061024.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | White
| 1 | | | |
 | Plate 2 x 2  | Orange
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Blue
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Black
| 1 | | | |
 | Brick 1 x 2  | Yellow
| 1 | | | |
 | Propeller 4 Blade 5 Diameter with Rounded Ends, Open Hub  | Black
| 1 | | | |
![Image of part Equipment Radio [Extended Handle, Expanded Speaker Grille]](https://cdn.rebrickable.com/media/parts/elements/6100054.jpg) | Equipment Radio [Extended Handle, Expanded Speaker Grille]  | Black
| 1 | | | |
 | Brick Special 2 x 4, with 2 x 2 Brick with Top Pin and 1 x 2 Side Plates  | Dark Bluish Gray
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/ldraw/1/3747b.png) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Blue
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Pearl Gold
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Bluish Gray
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | White
| 1 | | | |
 | Steering Stand 1 x 2 with Black Steering Wheel  | White
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4264008.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Orange
| 1 | | | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top  | Light Bluish Gray
| 1 | | | |