 | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole  | Light Bluish Gray
| 8 | | | |
![Image of part Technic Brick 1 x 12 [11 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389526.jpg) | Technic Brick 1 x 12 [11 Pin Holes]  | Black
| 8 | | | |
 | Technic Pin Connector Hub Perpendicular 3L with 2 Pins  | Light Bluish Gray
| 10 | | | |
 | Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts  | Dark Bluish Gray
| 8 | | | |
 | Tile 2 x 2 Curved, Macaroni  | White
| 28 | | | |
 | Plate 1 x 8  | Light Bluish Gray
| 15 | | | |
 | Wheel Hard Plastic Large (54mm D. x 30mm)  | Black
| 8 | | | |
 | Brick Curved 1 x 4 x 1 1/3 No Studs  | White
| 4 | | | |
 | Technic Panel Car Mudguard 15 x 2 x 7  | White
| 1 | | | |
 | Tile 2 x 2 Curved, Macaroni  | Reddish Orange
| 8 | | | |
 | Slope Curved 10 x 2 x 2 with Curved End Right  | White
| 1 | | | |
 | Slope Curved 10 x 2 x 2 with Curved End Left  | White
| 1 | | | |
 | Brick 1 x 4 without Bottom Tubes  | Trans-Black
| 5 | | | |
 | Plate 1 x 2  | Reddish Orange
| 18 | | | |
 | Brick 1 x 4  | Dark Bluish Gray
| 8 | | | |
 | Plate 1 x 5  | White
| 6 | | | |
 | Slope Curved 1 x 4 x 1 2/3 No Studs  | White
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Opal Trans-Purple
| 8 | | | |
 | Plate 2 x 8  | Black
| 8 | | | |
 | Torso Space Suit, Dark Blue and Sand Blue Panel, Gold Lines, Classic Space Logo Print, Dark Azure Arms, Dark Blue Hands  | White
| 1 | | | |
 | Torso Space Suit, Dark Blue and Sand Blue Panel, Gold Lines, Classic Space Logo Print, Dark Azure Arms, Dark Blue Hands  | White
| 1 | | | |
 | Rock Panel 2 x 4 x 6  | Dark Orange
| 1 | | | |
 | Windscreen 6 x 6 x 1 2/3  | Trans-Black
| 1 | | | |
 | Torso Space Suit, Dark Blue and Sand Blue Panel, Gold Lines, Classic Space Logo Print, Bright Light Orange Arms, Dark Blue Hands  | White
| 1 | | | |
 | Brick 2 x 8  | Dark Bluish Gray
| 2 | | | |
 | Plate 4 x 10  | Dark Bluish Gray
| 4 | | | |
 | Tile 2 x 2 with Modern Classic Space Logo print  | White
| 3 | | | |
 | Brick 1 x 6  | Sand Blue
| 7 | | | |
 | Wheel Arch, Mudguard 10 x 4 x 2/3  | White
| 1 | | | |
 | Tile 3 x 3 Curved, Macaroni  | Light Bluish Gray
| 2 | | | |
 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end  | Light Bluish Gray
| 4 | | | |
 | Tile 2 x 4 with Groove  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Black
| 12 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Black
| 8 | | | |
 | Plate Special, 2 x 2 Studs and Handle, Closed Ends (Mech Chest Plate / Armor)  | White
| 2 | | | |
 | Plate 1 x 12  | White
| 4 | | | |
 | Panel 6 x 5 x 3 1/3 Curved Top  | Trans-Black
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Orange
| 11 | | | |
 | Brick 1 x 4  | White
| 6 | | | |
 | Minifig Head Determined, Open Mouth Smile print  | Yellow
| 1 | | | |
 | Brick 2 x 2 Corner  | White
| 8 | | | |
 | Tile Round 2 x 2 with Hole  | Dark Tan
| 8 | | | |
 | Torso Space Suit, Dark Blue and Sand Blue Panel, Gold Lines, Classic Space Logo Print, Bright Green Arms, Dark Blue Hands  | White
| 1 | | | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper)  | Light Bluish Gray
| 6 | | | |
 | Helmet Space with Air Intakes and Hole on Top  | Bright Green
| 1 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6156991.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Black
| 8 | | | |
 | Plant, Carrot  | Medium Lavender
| 2 | | | |
 | Box 2 x 2 x 2 Door with Slot  | Black
| 2 | | | |
 | Rock 1 x 1 Crystal 5 Point  | Opal Trans-Purple
| 2 | | | |
![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6469858.jpg) | Panel 1 x 2 x 2 [Side Supports / Hollow Studs]  | Trans-Black
| 6 | | | |
 | Minifig Neckwear Space Suit with Classic Space Logo print  | Bright Light Orange
| 1 | | | |
 | Minifig Neckwear Front Harness with 4 Back Studs  | Bright Green
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Light Bluish Gray
| 17 | | | |
 | Brick 1 x 8  | White
| 2 | | | |
 | Helmet Space, White Neck Pattern  | Dark Azure
| 1 | | | |
 | Helmet Space, White Neck Pattern  | Dark Azure
| 1 | | | |
 | Helmet Space, Flat  | Bright Light Orange
| 1 | | | |
 | Brick 1 x 2 x 5 without Side Supports  | Trans-Purple
| 2 | | | |
 | Vehicle Track, Roller Coaster Straight 4L  | Reddish Orange
| 4 | | | |
 | Hips and White Legs with Dark Blue, Sand Blue, and Gold Space Suit Orange Stripe with Triangle on Knees Print  | Dark Blue
| 1 | | | |
 | Hips and White Legs with Dark Blue, Sand Blue, and Gold Space Suit Orange Stripe with Triangle on Knees Print  | Dark Blue
| 1 | | | |
 | Hips and White Legs with Dark Blue, Sand Blue, and Gold Space Suit Orange Stripe with Triangle on Knees Print  | Dark Blue
| 1 | | | |
 | Hips and White Legs with Dark Blue, Sand Blue, and Gold Space Suit Orange Stripe with Triangle on Knees Print  | Dark Blue
| 1 | | | |
 | Slope Inverted 75° 2 x 1 x 3  | Dark Tan
| 2 | | | |
 | Brick Curved 1 x 4 x 2/3 Double, No Studs  | Black
| 3 | | | |
 | Plate 1 x 8  | White
| 4 | | | |
 | Plate 2 x 6  | White
| 4 | | | |
 | Brick Special 1 x 6 x 4 with 4 Pin Holes and Opening  | Reddish Orange
| 2 | | | |
 | Window 1 x 4 x 3 without Shutter Tabs  | Black
| 3 | | | |
 | Tile 1 x 6 with Groove  | Black
| 3 | | | |
![Image of part Minifig Head, Beard Stubble, Raised Eyebrow, White Pupils Print, Stubble Goatee [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6218310.jpg) | Minifig Head, Beard Stubble, Raised Eyebrow, White Pupils Print, Stubble Goatee [Hollow Stud]  | Yellow
| 1 | | | |
 | Minifig Head, Thick Eyebrows, Goatee, Smile Print  | Yellow
| 1 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | White
| 8 | | | |
 | Brick Curved 2 x 2 x 1 1/3 Curved Top, Corner  | White
| 2 | | | |
 | Plate 1 x 2  | Trans-Light Blue
| 5 | | | |
 | Plate 1 x 8  | Reddish Orange
| 2 | | | |
 | Minifig Neckwear Backpack First Order Trooper  | Dark Azure
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6469829.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Trans-Clear
| 1 | | | |
 | Minifig Neckwear Backpack First Order Trooper  | Dark Azure
| 1 | | | |
![Image of part Headwear Accessory Visor [Large with Trapezoid Top]](https://cdn.rebrickable.com/media/parts/elements/6469829.jpg) | Headwear Accessory Visor [Large with Trapezoid Top]  | Trans-Clear
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | White
| 6 | | | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 18 | | | |
 | Tile 1 x 2 with Battery, Graph print  | White
| 2 | | | |
 | Plate 2 x 8  | White
| 2 | | | |
 | Tile 1 x 6 with Groove  | Sand Blue
| 3 | | | |
 | Tile 2 x 2 with Groove  | Sand Blue
| 3 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6366391.jpg) | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]  | White
| 4 | | | |
 | Book Cover with White HUD, Target, and Dark Blue Graphs Print  | Trans-Light Blue
| 1 | | | |
 | Minifig Head Alien, 3 Eyes, Green Spots print  | Lime
| 1 | | | |
 | Slope 65° 2 x 1 x 2  | Dark Bluish Gray
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove  | Dark Bluish Gray
| 2 | | | |
 | Minifig Head, Thin Eyebrows, Eyelashes, Smile, and Hearing Aid Print  | Yellow
| 1 | | | |
 | Technic Pin 1/2 with Friction  | Red
| 8 | | | |
 | Tile Round 1 x 2 Half Circle  | Black
| 2 | | | |
 | Headwear Accessory Crown Long with Bar  | Lime
| 1 | | | |
 | Headwear Accessory Crown Long with Bar  | Lime
| 1 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | White
| 5 | | | |
 | Technic Beam 1 x 2 Thin  | Dark Bluish Gray
| 4 | | | |
 | Slope 45° 2 x 2  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 8  | Dark Bluish Gray
| 2 | | | |
 | Technic Beam 1 x 9 Thick  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 8  | Dark Bluish Gray
| 2 | | | |
 | Plate 6 x 8  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 3  | White
| 3 | | | |
 | Tile Round 1 x 1  | Trans-Orange
| 13 | | | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle  | Dark Bluish Gray
| 4 | | | |
 | Brick 2 x 2  | Dark Tan
| 4 | | | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6249091.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | White
| 6 | | | |
 | Plate Round Corner 3 x 3  | Black
| 4 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Sand Blue
| 4 | | | |
 | Plate 1 x 3  | White
| 4 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 6 | | | |
 | Tile Round 2 x 4  | White
| 2 | | | |
 | Tile 1 x 4 with Groove  | Light Bluish Gray
| 2 | | | |
 | Technic Axle Pin 3L without Friction Ridges and 2L Axle  | White
| 3 | | | |
 | Plate 4 x 6  | Black
| 1 | | | |
 | Plant, Flower Stem with Bar and 6 Stems  | Dark Purple
| 1 | | | |
 | Tile 1 x 1 with Groove  | Reddish Orange
| 2 | | | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/4518992.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | White
| 2 | | | |
 | Tile 1 x 3  | Orange
| 2 | | | |
 | Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Long Tip)  | Black
| 2 | | | |
 | Plate 1 x 2  | Light Bluish Gray
| 4 | | | |
 | Plate 2 x 2  | Black
| 5 | | | |
 | Technic Beam 1 x 2 Thin  | Red
| 4 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211000.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Dark Bluish Gray
| 4 | | | |
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg) | Technic Axle 5.5 with Stop [Rounded Short End]  | Dark Bluish Gray
| 10 | | | |
 | Technic Axle and Pin Connector Angled #1  | Black
| 4 | | | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/6012812.jpg) | Arm Mechanical with Clip [Thick Support]  | Dark Bluish Gray
| 4 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | White
| 2 | | | |
 | Wedge Plate 3 x 2 Left  | White
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Dark Bluish Gray
| 6 | | | |
![Image of part Slope 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]](https://cdn.rebrickable.com/media/parts/elements/6172693.jpg) | Slope 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]  | Trans-Dark Pink
| 6 | | | |
 | Tile 1 x 3  | White
| 2 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | White
| 2 | | | |
 | Slope Inverted 33° 3 x 2, Round Bottom Pin  | White
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | White
| 2 | | | |
 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate  | Red
| 2 | | | |
 | Plate 1 x 6  | White
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | White
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | Dark Tan
| 2 | | | |
 | Weapon Gun / Blaster with Studs on Side  | White
| 1 | | | |
 | Plate 2 x 2  | White
| 4 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Black
| 4 | | | |
 | Brick Special 1 x 1 Studs on 4 Sides  | Black
| 1 | | | |
 | Brick Special 1 x 1 Studs on 4 Sides  | Black
| 1 | | | |
 | Plant, Plate 1 x 1 Round with 3 Leaves  | Medium Lavender
| 2 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6177114.jpg) | Technic Pin Connector Round 1L [Beam]  | White
| 5 | | | |
 | Tile Round 1 x 1 Half Circle  | Bright Light Orange
| 3 | | | |
 | Plate Special 1 x 2 with 2 End Towballs  | Black
| 1 | | | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/4522034.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | Black
| 2 | | | |
 | Brick 1 x 2  | Dark Tan
| 2 | | | |
 | Plate 1 x 1 x 2/3 with Open Stud  | Medium Nougat
| 2 | | | |
 | Technic Axle and Pin Connector Angled #2 - 180°  | Light Bluish Gray
| 2 | | | |
 | Plate 1 x 4  | Light Bluish Gray
| 2 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Bright Green
| 2 | | | |
 | Plate Special 10 x 10 Octagonal with Hole  | Dark Tan
| 1 | | | |
 | Tile 1 x 2 with Gold Circuitry / Solar Panel print  | Black
| 1 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211466.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | Light Bluish Gray
| 1 | | | |
 | Creature Body Part, Horn (Unicorn)  | Flat Silver
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Tan
| 4 | | | |
![Image of part Box 2 x 2 x 2 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/434501.jpg) | Box 2 x 2 x 2 [Hollow Studs]  | White
| 2 | | | |
 | Bar 6L with Stop Ring  | Pearl Gold
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | White
| 4 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Black
| 3 | | | |
 | Brick Round 2 x 2 Truncated Cone  | White
| 2 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6210076.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | White
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Pearl Gold
| 4 | | | |
 | Plate 1 x 6  | Tan
| 2 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474001.jpg) | Dish 2 x 2 Inverted [Radar]  | White
| 2 | | | |
 | Plate Round 1 x 1 with Open Stud  | Light Bluish Gray
| 3 | | | |
 | Wedge Plate 3 x 3 Cut Corner  | White
| 2 | | | |
 | Plate 1 x 4  | Black
| 2 | | | |
 | Slope 30° 1 x 2 x 2/3  | White
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Orange
| 2 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Dark Orange
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Orange
| 5 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Yellow
| 5 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 2 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6236454.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Bright Light Orange
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth  | Black
| 2 | | | |
 | Brick and Axle Separator v2.0  | Dark Turquoise
| 1 | | | |
 | Slope 45° 2 x 2 with Computer Screen, with Crosshairs print  | White
| 1 | | | |
 | Tile Round 1 x 1 with Battery print  | White
| 1 | | | |
 | Tile Round 1 x 1 with Battery print  | White
| 1 | | | |
 | Plate 1 x 2  | Trans-Red
| 3 | | | |
 | Slope 45° 2 x 2  | Trans-Purple
| 1 | | | |
 | Slope 45° 2 x 4  | White
| 1 | | | |
 | Bar 1L with Top Stud and Two Side Studs  | Pearl Titanium
| 1 | | | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | Sand Blue
| 1 | | | |
 | Tile 1 x 6 with Groove  | White
| 1 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Dark Azure
| 2 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439039.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]  | Black
| 2 | | | |
 | Tile 1 x 2 with Groove  | Bright Light Orange
| 2 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408126.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Black
| 2 | | | |
 | Technic Axle 2 Notched  | Red
| 4 | | | |
 | Plate 2 x 3  | Orange
| 2 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439039.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]  | Black
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Black
| 2 | | | |
 | Tile Round 2 x 2 with Hole  | Reddish Orange
| 1 | | | |
 | Brick 2 x 2  | Dark Orange
| 1 | | | |
 | Brick 1 x 2  | Sand Blue
| 1 | | | |
 | Tile 1 x 2 with Groove  | Sand Blue
| 1 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Tan
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | White
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots  | Black
| 7 | | | |
![Image of part Pneumatic T-Piece (T Bar) [New Style]](https://cdn.rebrickable.com/media/parts/elements/6104209.jpg) | Pneumatic T-Piece (T Bar) [New Style]  | Black
| 1 | | | |
 | Plate 2 x 8  | Medium Azure
| 1 | | | |
 | Tile Round 1 x 1 Half Circle  | Dark Azure
| 1 | | | |
 | Tile 1 x 2 with Groove  | Trans-Light Blue
| 1 | | | |
 | Tile Round 1 x 1 Half Circle  | Dark Azure
| 1 | | | |
![Image of part Pneumatic T-Piece (T Bar) [New Style]](https://cdn.rebrickable.com/media/parts/elements/6104209.jpg) | Pneumatic T-Piece (T Bar) [New Style]  | Black
| 1 | | | |
![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585429.jpg) | Panel 1 x 2 x 3 [Side Supports / Hollow Studs]  | Light Bluish Gray
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 2 | | | |
 | Plate 2 x 4  | Light Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Light Bluish Gray
| 2 | | | |
 | Hinge 1 x 2 Locking with 2 Fingers and Towball Socket, 7 Teeth  | Black
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Pearl Gold
| 3 | | | |
 | Tile Special 1 x 2 with Handle  | White
| 2 | | | |
 | Plant, Flower, Plate Round 1 x 1 with 5 Petals  | Light Aqua
| 3 | | | |
 | Plate Special 1 x 2 5.9mm Towball Socket  | Light Bluish Gray
| 2 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529236.jpg) | Cone 1 x 1 [Top Groove]  | Black
| 2 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Tan
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Purple
| 2 | | | |
 | Tool Screwdriver and Spanner / Wrench  | Flat Silver
| 1 | | | |
 | Hook with Towball  | Dark Bluish Gray
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Clear
| 1 | | | |
 | Tile 1 x 2 with Groove  | Red
| 1 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Light Bluish Gray
| 1 | | | |
 | Technic Beam 1 x 3 Thick  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 4 x 6 with Trap Door Hinge [Long Pins]](https://cdn.rebrickable.com/media/parts/elements/4599044.jpg) | Plate Special 4 x 6 with Trap Door Hinge [Long Pins]  | White
| 1 | | | |
 | Plate 2 x 6  | Dark Tan
| 1 | | | |
 | Plate 2 x 4  | Black
| 1 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Black
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Clear
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Clear
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Flat Silver
| 2 | | | |
 | Plate 2 x 2  | Red
| 1 | | | |
 | Plate Round 1 x 1 with Open Stud  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | Bright Light Orange
| 1 | | | |
 | Tile 1 x 2 with Groove  | Medium Azure
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Black
| 2 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Sand Blue
| 1 | | | |
![Image of part Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots]](https://cdn.rebrickable.com/media/parts/elements/6265702.jpg) | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots]  | Dark Bluish Gray
| 1 | | | |
 | Handlebars with Angular Handles  | Light Bluish Gray
| 1 | | | |
![Image of part Brick Special 1 x 2 with Vertical Clip [Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4117061.jpg) | Brick Special 1 x 2 with Vertical Clip [Open O Clip]  | White
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Orange
| 1 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 2 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Black
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | White
| 1 | | | |
 | Plate 2 x 2  | Medium Azure
| 1 | | | |
 | Technic Axle 3 with Stop  | Reddish Brown
| 1 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6168620.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]  | Black
| 1 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4518029.jpg) | Cone 1 x 1 [Top Groove]  | Orange
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Purple
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Purple
| 1 | | | |
 | Brick Special 2 x 4, with 2 x 2 Brick with Top Pin and 1 x 2 Side Plates  | Light Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Open Stud  | Lime
| 1 | | | |
 | Plate Round 1 x 1 with Open Stud  | Lime
| 1 | | | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 1 | | | |