 | Hair and Helmet Space Wraparound, Spiky Medium Nougat, Breathing Vents and Red Eye Holes Print (Star-Lord)  | Pearl Titanium
| 1 | | | |
 | Hair and Helmet Space Wraparound, Spiky Medium Nougat, Breathing Vents and Red Eye Holes Print (Star-Lord)  | Pearl Titanium
| 1 | | | |
 | Wedge Curved 12 x 3 Right  | Dark Blue
| 1 | | | |
 | Minifig Head Star-Lord (Peter Quill) / Winter Soldier / Owen Grady, Beard Stubble, Brown Eyebrows, Smiling / Angry Clenched Teeth Print  | Light Nougat
| 1 | | | |
 | Minifig Head Star-Lord (Peter Quill) / Winter Soldier / Owen Grady, Beard Stubble, Brown Eyebrows, Smiling / Angry Clenched Teeth Print  | Light Nougat
| 1 | | | |
 | Wedge Curved 12 x 3 Left  | Dark Blue
| 1 | | | |
 | Windscreen 6 x 4 x 2 1/3 Bubble Canopy with Handle  | Trans-Brown
| 1 | | | |
 | Tile 2 x 2 with Alien Characters and Key Controls Print  | Light Bluish Gray
| 1 | | | |
![Image of part Neckwear Cape, Standard [Traditional Starched Fabric]](https://cdn.rebrickable.com/media/parts/elements/4143210.jpg) | Neckwear Cape, Standard [Traditional Starched Fabric]  | Red
| 1 | | | |
 | Wedge Curved 4 x 4 No Top Studs with Sentinel Yellow, Orange and Red Triangle and Black Stripe Trim Print  | Dark Purple
| 1 | | | |
 | Brick Round 2 x 2 x 1 2/3 Dome Top, Hollow Stud with Sentinel Face Print  | Dark Purple
| 1 | | | |
 | Tile 1 x 2 with Avionics Copper, Red & Silver Print  | Black
| 1 | | | |
 | Mask Wolverine with Black Pointed Sides Print  | Bright Light Orange
| 1 | | | |
 | Minifig Head Cyclops, Mask with Red and Gold Visor Print  | Dark Blue
| 1 | | | |
![Image of part Neckwear Cape, Standard [Traditional Starched Fabric]](https://cdn.rebrickable.com/media/parts/elements/4124171.jpg) | Neckwear Cape, Standard [Traditional Starched Fabric]  | Black
| 1 | | | |
 | Slope Curved 8 x 8 x 2 Inverted Double  | Dark Bluish Gray
| 2 | | | |
 | Slope Curved 8 x 8 x 2 Inverted Double  | Dark Bluish Gray
| 2 | | | |
 | Hair Mid-Length with Part over Right Shoulder and Magenta Highlights Print  | Black
| 1 | | | |
 | Helmet with Front Prongs and Wide Dark Purple Print (Magneto)  | Red
| 1 | | | |
 | Minifig Head Ronan The Accuser, Black Face, Gray Eyebrows, Angry, Mouth Closed / Clenched Teeth Print  | Blue
| 1 | | | |
 | Hips and Dark Bluish Gray Legs  | Black
| 1 | | | |
 | Hips and Dark Bluish Gray Legs  | Black
| 1 | | | |
 | Hips and Dark Bluish Gray Legs  | Black
| 1 | | | |
 | Weapon Gun / Blaster Large  | Pearl Titanium
| 1 | | | |
 | Weapon Gun / Blaster Large  | Pearl Titanium
| 1 | | | |
 | Weapon Gun / Blaster Large  | Pearl Titanium
| 1 | | | |
 | Torso Open Zipper Jacket over Gray Shirt with Silver Rivets and Leather Straps, Sling Bag on Back Print, Dark Red Arms, Black Hands  | Dark Red
| 1 | | | |
 | Support 1 x 6 x 5 Girder Rectangular  | Dark Bluish Gray
| 2 | | | |
![Image of part Minifig Head Storm, Dual Sided, Thin Eyebrows, Cheek Lines, Red Lips / Clenched Teeth Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6078917.jpg) | Minifig Head Storm, Dual Sided, Thin Eyebrows, Cheek Lines, Red Lips / Clenched Teeth Print [Hollow Stud]  | Reddish Brown
| 1 | | | |
 | Hose Rigid 3mm D. 7L / 5.6cm  | Black
| 4 | | | |
![Image of part Minifig Head Magneto, Dual Sided, Gray Eyebrows, Wrinkles and Cheek Lines, Frown / Angry Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6003625.jpg) | Minifig Head Magneto, Dual Sided, Gray Eyebrows, Wrinkles and Cheek Lines, Frown / Angry Print [Hollow Stud]  | Light Nougat
| 1 | | | |
 | Minifig Head Special, Raccoon with Reddish Brown Shoulder Pads Print (Rocket)  | Dark Bluish Gray
| 1 | | | |
 | Helmet Space with Mouth Slit and with Black Eyeholes, Red Star and Gold Markings Print  | Flat Silver
| 1 | | | |
![Image of part Hair Swept Back with Widow's Peak [Plain]](https://cdn.rebrickable.com/media/parts/elements/6047103.jpg) | Hair Swept Back with Widow's Peak [Plain]  | White
| 1 | | | |
 | Large Figure Connector, Perpendicular 3L with 2 Pins and 2 Ball Joints  | Black
| 2 | | | |
![Image of part Minifig Hipwear Tail Raccoon / Cat / Fox Costume [Plain]](https://cdn.rebrickable.com/media/parts/elements/6080817.jpg) | Minifig Hipwear Tail Raccoon / Cat / Fox Costume [Plain]  | Dark Bluish Gray
| 1 | | | |
 | Slope 18° 4 x 2  | Dark Red
| 1 | | | |
 | Weapon Gun / Blaster Small  | Pearl Titanium
| 2 | | | |
 | Weapon Gun / Blaster Small  | Pearl Titanium
| 2 | | | |
 | Legs Short  | Orange
| 1 | | | |
![Image of part Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037668.jpg) | Brick Curved 10 x 1 [Symmetric Inside Ridges]  | Blue
| 2 | | | |
 | Engine, Large  | Black
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove (Jumper)  | Dark Bluish Gray
| 7 | | | |
 | Weapon Dagger / Knife  | Dark Bluish Gray
| 2 | | | |
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/6004930.jpg) | Dish 3 x 3 Inverted [Radar]  | Flat Silver
| 2 | | | |
 | Technic Brick 6 x 8 with 4 x 6 Opening  | Black
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Dark Bluish Gray
| 17 | | | |
 | Large Figure Wing  | Flat Silver
| 2 | | | |
![Image of part Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard]](https://cdn.rebrickable.com/media/parts/ldraw/0/30173b.png) | Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard]  | Black
| 3 | | | |
 | Hair Mid-Length with Part over Front of Right Shoulder  | White
| 1 | | | |
 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes  | Dark Bluish Gray
| 4 | | | |
 | Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)  | Black
| 2 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6056380.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]  | Dark Green
| 2 | | | |
 | Brick 1 x 4  | Dark Bluish Gray
| 5 | | | |
 | Hose Rigid 3mm D. 3L / 2.4cm  | Reddish Brown
| 2 | | | |
 | Antenna 1 x 4 with Rounded Top  | Trans-Clear
| 2 | | | |
![Image of part Slope Curved 4 x 1 No Studs with Gold Entwined Vines Print [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6083020.jpg) | Slope Curved 4 x 1 No Studs with Gold Entwined Vines Print [Stud Holder with Symmetric Ridges]  | Reddish Brown
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Flat Silver
| 36 | | | |
 | Brick Special 1 x 1 with Clip Horizontal  | Red
| 2 | | | |
 | Windscreen 7 x 4 x 2 Round with Handle  | Trans-Brown
| 1 | | | |
 | Windscreen 7 x 4 x 2 Round with Handle  | Trans-Brown
| 1 | | | |
 | Slope 45° 2 x 8  | Black
| 2 | | | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045938.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | Blue
| 6 | | | |
 | Wedge Plate 8 x 8 Cut Corner  | Blue
| 2 | | | |
![Image of part Hair Pointed [Vampire / Wolverine]](https://cdn.rebrickable.com/media/parts/elements/4169614.jpg) | Hair Pointed [Vampire / Wolverine]  | Black
| 1 | | | |
 | Hips and Dark Blue Legs  | Bright Light Orange
| 1 | | | |
 | Technic Panel Fairing #18 Large Smooth, Side B  | Flat Silver
| 2 | | | |
 | Slope 45° 2 x 8  | Dark Red
| 2 | | | |
 | Plate 1 x 2  | Trans-Dark Blue
| 8 | | | |
 | Projectile, Spring Shooter Ammunition 8L Bar  | Trans-Dark Blue
| 3 | | | |
 | Wave / Lightning Angular, Double with Marbled Trans-Purple Pattern  | Trans-Light Blue
| 2 | | | |
![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211705.jpg) | Technic Brick 1 x 14 [13 Pin Holes]  | Light Bluish Gray
| 2 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6102782.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]  | Black
| 6 | | | |
 | Tile 1 x 8 with Groove  | Dark Red
| 4 | | | |
 | Technic Panel Fairing #17 Large Smooth, Side A  | Flat Silver
| 2 | | | |
 | Slope Curved 3 x 1 No Studs  | Black
| 5 | | | |
 | Plate 1 x 6  | Light Bluish Gray
| 6 | | | |
 | Tile 2 x 4 with Groove  | Black
| 3 | | | |
 | Hood, Connected Chin  | Black
| 1 | | | |
 | Hood, Connected Chin  | Black
| 1 | | | |
 | Technic Brick 6 x 8 with 4 x 6 Opening  | Light Bluish Gray
| 1 | | | |
 | Hood, Connected Chin  | Black
| 1 | | | |
 | Slope Inverted 75° 2 x 1 x 3  | Dark Bluish Gray
| 2 | | | |
 | Tile 1 x 2 with Joystick and Vehicle Control Panel Print  | Dark Bluish Gray
| 2 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Tips  | Black
| 1 | | | |
 | Plate 2 x 2 Corner  | Black
| 10 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Tips  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 7 | | | |
 | Plate 1 x 1  | Trans-Dark Blue
| 8 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Medium Nougat
| 8 | | | |
 | Plate 1 x 3  | Light Bluish Gray
| 8 | | | |
 | Hinge Plate 1 x 12 Locking 7 Teeth with Angled Side Extensions and Tapered Ends  | Dark Blue
| 4 | | | |
![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4567448.jpg) | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]  | Light Bluish Gray
| 4 | | | |
 | Torso Mechanical, Battle Droid  | Dark Brown
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove (Jumper)  | Reddish Brown
| 4 | | | |
 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs  | Light Bluish Gray
| 4 | | | |
 | Tile Round 2 x 2 with Bottom Cross  | Black
| 1 | | | |
 | Wedge Curved 10 x 3 Right  | Light Bluish Gray
| 2 | | | |
 | Wedge Curved 10 x 3 Left  | Light Bluish Gray
| 2 | | | |
 | Brick 1 x 4  | Dark Bluish Gray
| 3 | | | |
 | Wedge Plate 12 x 3 Right  | Light Bluish Gray
| 1 | | | |
 | Hips and Dark Blue Legs  | Dark Blue
| 1 | | | |
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370226.jpg) | Technic Brick 1 x 8 [7 Pin Holes]  | Black
| 2 | | | |
 | Slope Curved 3 x 1 No Studs  | Black
| 4 | | | |
 | Slope Inverted 75° 2 x 1 x 3  | Light Bluish Gray
| 2 | | | |
 | Wedge Plate 12 x 3 Left  | Light Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Neon Orange
| 14 | | | |
 | Brick Curved 6 x 2  | Black
| 2 | | | |
![Image of part Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037664.jpg) | Brick Curved 10 x 1 [Symmetric Inside Ridges]  | Black
| 2 | | | |
![Image of part Technic Plate 2 x 8 [7 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211449.jpg) | Technic Plate 2 x 8 [7 Holes]  | Light Bluish Gray
| 2 | | | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/6058111.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]  | Bright Light Orange
| 2 | | | |
 | Brick 1 x 2  | Black
| 7 | | | |
 | Tile 1 x 1 with Groove  | Dark Bluish Gray
| 6 | | | |
 | Bar Holder with Clip  | Reddish Brown
| 6 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6057390.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Dark Purple
| 10 | | | |
 | Slope Curved 2 x 2 x 2/3  | Dark Blue
| 8 | | | |
 | Wedge Plate 8 x 8 Cut Corner  | Light Bluish Gray
| 4 | | | |
 | Tail 12 x 2 x 5  | Dark Blue
| 2 | | | |
![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4293877.jpg) | Dish 4 x 4 Inverted [Radar]  | Trans-Light Blue
| 2 | | | |
 | Plate 4 x 6  | Light Bluish Gray
| 2 | | | |
![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4293877.jpg) | Dish 4 x 4 Inverted [Radar]  | Trans-Light Blue
| 2 | | | |
 | Torso Mechanical, Battle Droid  | Dark Bluish Gray
| 2 | | | |
 | Hose, Ribbed 7mm D. 2L / 1.6cm  | Flat Silver
| 5 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Blue
| 13 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Black
| 3 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211466.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | Light Bluish Gray
| 3 | | | |
 | Wedge Curved Inverted 6 x 2 Left  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 6  | Dark Bluish Gray
| 2 | | | |
 | Antenna 8H Whip  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 2 with Stylised Computer Console Print  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 2 Corner  | Light Bluish Gray
| 4 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Blue
| 4 | | | |
 | Plate 2 x 6  | Black
| 4 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 4 | | | |
 | Tile 1 x 4 with Groove  | Yellow
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Neon Orange
| 4 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092649.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]  | Dark Bluish Gray
| 4 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Black
| 6 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Orange
| 6 | | | |
 | Slope Curved 4 x 2 No Studs  | Light Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Light Bluish Gray
| 6 | | | |
 | Hinge Plate 1 x 12 Locking 7 Teeth with Angled Side Extensions and Tapered Ends  | Flat Silver
| 2 | | | |
 | Technic Driving Ring Extension, 4 Ridges  | Light Bluish Gray
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Light Bluish Gray
| 7 | | | |
 | Hair Short, Tousled with Side Part  | Medium Nougat
| 1 | | | |
 | Hair Short, Tousled with Side Part  | Medium Nougat
| 1 | | | |
 | Tile 1 x 1 with Groove  | Dark Red
| 5 | | | |
 | Slope 30° 1 x 2 x 2/3  | Dark Bluish Gray
| 5 | | | |
![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/6054858.jpg) | Technic Pin Connector Round [Slotted]  | Flat Silver
| 5 | | | |
 | Brick 2 x 4  | Dark Bluish Gray
| 2 | | | |
 | Brick 2 x 4  | Dark Bluish Gray
| 2 | | | |
 | Slope Curved 3 x 1 No Studs  | Dark Bluish Gray
| 2 | | | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/4211487.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]  | Light Bluish Gray
| 2 | | | |
 | Wedge Curved 8 x 3 x 2 Open Left  | Dark Blue
| 1 | | | |
 | Technic Axle and Pin Connector Angled #1  | Dark Bluish Gray
| 8 | | | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Thick U Clip, Solid Stud]](https://cdn.rebrickable.com/media/parts/ldraw/0/60475a.png) | Brick Special 1 x 1 with Clip Vertical [Thick U Clip, Solid Stud]  | Black
| 2 | | | |
 | Slope Curved 2 x 2 x 2/3  | Dark Bluish Gray
| 2 | | | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | Dark Blue
| 4 | | | |
 | Plate 1 x 2  | Trans-Light Blue
| 4 | | | |
 | Plate 1 x 2  | Dark Blue
| 10 | | | |
 | Slope 30° 1 x 2 x 2/3  | Black
| 6 | | | |
 | Wedge Plate 3 x 2 Left  | Bright Light Orange
| 6 | | | |
 | Tile 1 x 6 with Groove  | Dark Bluish Gray
| 2 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211000.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Dark Bluish Gray
| 6 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Orange
| 6 | | | |
 | Tile 1 x 2 with Groove  | Trans-Yellow
| 6 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/71/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | Light Bluish Gray
| 15 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]](https://cdn.rebrickable.com/media/parts/elements/4289538.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]  | Black
| 7 | | | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/6276867.jpg) | Arm Mechanical with Clip [Thick Support]  | Black
| 7 | | | |
 | Plate 1 x 2  | Dark Azure
| 7 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Red
| 7 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Yellow
| 7 | | | |
 | Brick 2 x 2  | Dark Bluish Gray
| 4 | | | |
 | Brick 2 x 2 Corner  | Black
| 4 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove  | Light Bluish Gray
| 2 | | | |
 | Brick 2 x 2 Corner  | Blue
| 2 | | | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3  | Black
| 4 | | | |
 | Slope 18° 4 x 2  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 6  | Dark Bluish Gray
| 4 | | | |
 | Tile Round 2 x 2 with Hole  | Dark Bluish Gray
| 4 | | | |
![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211664.jpg) | Dish 4 x 4 Inverted [Radar]  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 3  | Blue
| 4 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Dark Blue
| 4 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Light Bluish Gray
| 4 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6069984.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Reddish Brown
| 4 | | | |
 | Plate 2 x 8  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 8  | Black
| 2 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 28 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | Dark Tan
| 9 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 9 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Yellow
| 3 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove (Jumper)  | Dark Bluish Gray
| 2 | | | |
 | Technic Ball Joint  | Metallic Silver
| 1 | | | |
 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs  | Flat Silver
| 2 | | | |
 | Technic Ball Joint  | Metallic Silver
| 1 | | | |
 | Technic Ball Joint  | Metallic Silver
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Red
| 5 | | | |
 | Plate 1 x 1  | Black
| 5 | | | |
 | Wedge Curved 12 x 3 Right  | Blue
| 1 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Black
| 6 | | | |
 | Plate 1 x 4  | Blue
| 6 | | | |
 | Wedge Plate 3 x 2 Right  | Bright Light Orange
| 6 | | | |
 | Plate 1 x 2  | Trans-Orange
| 6 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Dark Bluish Gray
| 6 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4211064.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Dark Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with 5.9mm Towball Socket and Towball  | Dark Bluish Gray
| 4 | | | |
 | Wedge Curved Inverted 6 x 2 Right  | Dark Bluish Gray
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/3006347.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Neon Orange
| 4 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Black
| 4 | | | |
 | Wedge Curved 8 x 3 x 2 Open Right  | Dark Blue
| 1 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 4 | | | |
 | Tile 2 x 2 with Groove  | Dark Bluish Gray
| 2 | | | |
 | Flag 5 x 6 Hexagonal with U Clips  | Light Bluish Gray
| 1 | | | |
 | Plate 1 x 10  | Dark Bluish Gray
| 2 | | | |
 | Brick 1 x 2 without Bottom Tube  | Trans-Yellow
| 4 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove (Jumper)  | Dark Red
| 2 | | | |
 | Slope Curved 3 x 1 No Studs  | Dark Azure
| 4 | | | |
 | Weapon Bladed Claw Spread  | Flat Silver
| 3 | | | |
 | Slope 45° 2 x 2  | Black
| 3 | | | |
 | Technic Pin 1/2  | Blue
| 12 | | | |
![Image of part Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]](https://cdn.rebrickable.com/media/parts/elements/4199601.jpg) | Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]  | Trans-Brown
| 1 | | | |
 | Plate 4 x 6  | Black
| 1 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211441.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Light Bluish Gray
| 2 | | | |
![Image of part Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard]](https://cdn.rebrickable.com/media/parts/ldraw/179/30173b.png) | Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard]  | Flat Silver
| 2 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Yellow
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Bluish Gray
| 7 | | | |
 | Plate 1 x 3  | Dark Red
| 3 | | | |
 | Plate 1 x 2  | Trans-Yellow
| 5 | | | |
 | Plate 1 x 1  | Dark Blue
| 5 | | | |
 | Plate 1 x 2  | Dark Green
| 5 | | | |
 | Cone 2 x 2 x 2, Open Stud  | Black
| 2 | | | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End  | Dark Purple
| 2 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Black
| 2 | | | |
 | Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings  | Dark Bluish Gray
| 4 | | | |
 | Brick Special 2 x 2 with Pin and Axle Hole  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 4  | Black
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Dark Bluish Gray
| 4 | | | |
 | Tile 1 x 3  | Dark Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Flat Silver
| 10 | | | |
 | Technic Pin Connector Round with 4 Clips  | Black
| 1 | | | |
 | Plate 4 x 6  | Yellow
| 1 | | | |
 | Plate 6 x 6  | Dark Bluish Gray
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Blue
| 6 | | | |
 | Plate Special 2 x 2 with Pin on Bottom  | Light Bluish Gray
| 6 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4208686.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Blue
| 6 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 6 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Trans-Neon Orange
| 2 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/374726.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Black
| 2 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Light Bluish Gray
| 2 | | | |
 | Brick Curved 6 x 1  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 6  | Light Bluish Gray
| 2 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4213607.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Dark Bluish Gray
| 2 | | | |
 | Windscreen 3 x 4 x 4 Inverted, Rounded Top Inside Edges, Cut-Out Bottom Inside Edges  | Trans-Light Blue
| 1 | | | |
 | Plate Special 1 x 8 with Door Rail  | Light Bluish Gray
| 1 | | | |
 | Plate 1 x 1  | Trans-Dark Blue
| 3 | | | |
 | Plate 2 x 3  | Black
| 3 | | | |
 | Plate Special 10 x 10 Octagonal with Hole  | Dark Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Orange
| 9 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Orange
| 9 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Flat Silver
| 9 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6308000.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]  | Black
| 4 | | | |
 | Tile 1 x 2 with Groove  | Bright Light Orange
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6347294.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]  | Yellow
| 4 | | | |
 | Plate 1 x 4  | Dark Blue
| 4 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4519970.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | Dark Brown
| 4 | | | |
 | Wedge Plate 2 x 4  | Dark Red
| 4 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Black
| 4 | | | |
 | Wedge Plate 4 x 4 Cut Corner  | Dark Bluish Gray
| 4 | | | |
 | Cone 4 x 4 x 2 Hollow No Studs  | Dark Bluish Gray
| 1 | | | |
 | Wedge Curved 12 x 3 Left  | Blue
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | Dark Bluish Gray
| 1 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Dark Blue
| 2 | | | |
![Image of part Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg) | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]  | Dark Blue
| 2 | | | |
 | Brick 1 x 1 x 3  | Black
| 2 | | | |
 | Plate 1 x 2  | Trans-Dark Blue
| 2 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Dark Blue
| 2 | | | |
 | Wedge Sloped 45° 2 x 2 Corner  | Blue
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | Blue
| 2 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Dark Blue
| 2 | | | |
 | Tile 1 x 2 with Groove  | Dark Bluish Gray
| 2 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | Yellow
| 2 | | | |
 | Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs  | Medium Azure
| 2 | | | |
 | Plate 2 x 2 Corner  | Dark Blue
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | Light Bluish Gray
| 8 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Yellow
| 5 | | | |
 | Plate 2 x 2  | Yellow
| 5 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Reddish Brown
| 5 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 3 | | | |
 | Tile 1 x 1 with Groove  | Blue
| 3 | | | |
 | Plate 2 x 10  | Black
| 1 | | | |
 | Projectile, Spring Shooter Ammunition 8L Bar  | Trans-Red
| 3 | | | |
 | Brick 2 x 6  | Light Bluish Gray
| 1 | | | |
 | Plate 1 x 2  | Black
| 3 | | | |
 | Plate 1 x 4  | Yellow
| 3 | | | |
 | Bracket 1 x 2 - 2 x 4  | Light Bluish Gray
| 3 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211436.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Light Bluish Gray
| 2 | | | |
 | Window 1 x 4 x 3 without Shutter Tabs  | Black
| 1 | | | |
 | Slope Curved 3 x 1 No Studs  | Red
| 2 | | | |
 | Wedge Plate 4 x 4 Cut Corner  | Blue
| 2 | | | |
 | Tile 1 x 6 with Groove  | Black
| 1 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Bright Light Orange
| 1 | | | |
 | Plate 2 x 2 Corner  | Light Bluish Gray
| 2 | | | |
 | Brick 2 x 2  | Black
| 2 | | | |
 | Wedge Curved 6 x 4 Triple  | Dark Bluish Gray
| 2 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Yellow
| 1 | | | |
 | Plate Round 6 x 6 with Hole  | Light Bluish Gray
| 2 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Black
| 2 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092570.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]  | Black
| 2 | | | |
 | Bracket 2 x 2 - 2 x 2  | Light Bluish Gray
| 2 | | | |
 | Plate 2 x 8  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 4 with 2 Studs  | Light Bluish Gray
| 2 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Black
| 2 | | | |
 | Tile Round 2 x 2 with Hole  | Dark Bluish Gray
| 2 | | | |
 | Brick 2 x 2 Corner  | Black
| 2 | | | |
 | Plate 1 x 1  | Trans-Yellow
| 7 | | | |
 | Plate 1 x 8  | Light Bluish Gray
| 1 | | | |
 | Wedge 4 x 4 Fractured Polygon Top  | Dark Bluish Gray
| 1 | | | |
![Image of part Wedge 3 x 4 [Stud Notches]](https://cdn.rebrickable.com/media/parts/elements/4622604.jpg) | Wedge 3 x 4 [Stud Notches]  | Blue
| 1 | | | |
 | Wedge 4 x 4 Fractured Polygon Top  | Dark Bluish Gray
| 1 | | | |
![Image of part Bar 7 x 3 with Double Clips (Ladder) [Straight Clips]](https://cdn.rebrickable.com/media/parts/elements/4275673.jpg) | Bar 7 x 3 with Double Clips (Ladder) [Straight Clips]  | Light Bluish Gray
| 1 | | | |
 | Plate 4 x 4  | Dark Bluish Gray
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth  | Black
| 4 | | | |
 | Plate 1 x 2  | Dark Pink
| 4 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Light Bluish Gray
| 4 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4514398.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Blue
| 4 | | | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 4 | | | |
 | Plate Special 2 x 2 with Pin on Bottom  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball  | Dark Bluish Gray
| 4 | | | |
 | Wedge Plate 2 x 4  | Light Bluish Gray
| 4 | | | |
 | Slope Inverted 45° 2 x 1  | Blue
| 4 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | Black
| 4 | | | |
 | Plate Special 2 x 2 with 2 Pin Holes  | Black
| 4 | | | |
 | Tile 1 x 1 with Groove  | Bright Light Orange
| 4 | | | |
 | Plate 1 x 2  | Dark Red
| 4 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove  | Yellow
| 4 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515367.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Yellow
| 4 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598528.jpg) | Plate Special 1 x 2 [Top Clip]  | Black
| 4 | | | |
 | Brick 1 x 2  | Dark Azure
| 4 | | | |
 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)  | Dark Bluish Gray
| 4 | | | |
 | Technic Axle 3 with Stud  | Dark Tan
| 4 | | | |
 | Brick Special 1 x 2 with Pin  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball  | Dark Bluish Gray
| 4 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4215339.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Light Blue
| 3 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Yellow
| 3 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Yellow
| 3 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Reddish Brown
| 3 | | | |
 | Plate 2 x 4  | Reddish Brown
| 3 | | | |
 | Wing, Tail 4 x 1 x 3  | Blue
| 2 | | | |
 | Tile 2 x 2 with Groove  | Light Bluish Gray
| 1 | | | |
 | Plate 4 x 4  | Light Bluish Gray
| 1 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Red
| 2 | | | |
 | Launcher, Weapon Gun / Blaster / Shooter Mini  | Black
| 2 | | | |
 | Hinge 1 x 3 Triangle with Two Pins, 1 Locking Finger, Round Pin Holes  | Dark Bluish Gray
| 2 | | | |
 | Plate 2 x 3  | Black
| 2 | | | |
 | Tile 1 x 4 with Groove  | Light Bluish Gray
| 1 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Red
| 2 | | | |
 | Brick 2 x 4  | Blue
| 1 | | | |
 | Wedge Plate 3 x 2 Left  | Blue
| 2 | | | |
 | Slope Inverted 45° 2 x 1  | Dark Bluish Gray
| 2 | | | |
 | Windscreen 8 x 4 x 2 with 4 Studs and Handle  | Trans-Brown
| 1 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Red
| 2 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Yellow
| 1 | | | |
 | Plate Special 1 x 2 with 5.9mm Towball Socket and Towball  | Dark Bluish Gray
| 2 | | | |
 | Plate Round 6 x 6 with Hole  | Medium Azure
| 2 | | | |
 | Weapon Gun / Blaster 1 x 2 x 2/3 with Studs on Sides and Handle  | Black
| 1 | | | |
 | Brick 1 x 2  | Black
| 2 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 2 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 12 | | | |
 | Technic Axle 3  | Light Bluish Gray
| 6 | | | |
 | Wedge Curved Inverted 8 x 6 x 2 Cockpit  | Dark Bluish Gray
| 1 | | | |
 | Tile 1 x 3  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | Blue
| 1 | | | |
 | Hinge Brick 1 x 2 Base  | Light Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211441.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Light Bluish Gray
| 1 | | | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/4224253.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 1  | Dark Bluish Gray
| 2 | | | |
 | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle and Pin Connector Angled #1  | Black
| 2 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Black
| 2 | | | |
 | Plate 1 x 2  | Black
| 2 | | | |
 | Tail Shuttle  | Dark Bluish Gray
| 2 | | | |
 | Door 1 x 2 x 3 with Vertical Handle, Round Handle Holes on Back  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 2  | Dark Bluish Gray
| 2 | | | |
 | Plate 2 x 2 Corner  | Black
| 2 | | | |
 | Brick Curved 6 x 1 Inverted  | Dark Bluish Gray
| 2 | | | |
 | Brick 2 x 2  | Yellow
| 2 | | | |
 | Plate 1 x 2  | Light Bluish Gray
| 2 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Bright Light Orange
| 1 | | | |
 | Brick and Axle Separator v2.0  | Orange
| 1 | | | |
 | Wedge 2 x 2 Facet  | Light Bluish Gray
| 2 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 1 | | | |
 | Slope Inverted 45° 2 x 1  | Light Bluish Gray
| 2 | | | |
 | Flag 2 x 2 Trapezoid with Flat Area between Clips  | Dark Bluish Gray
| 2 | | | |
 | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top  | Dark Bluish Gray
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Trans-Orange
| 1 | | | |
 | Plate 2 x 8  | Red
| 1 | | | |
 | Plate 1 x 2  | Black
| 2 | | | |
 | Wedge Plate 4 x 2 Left  | Blue
| 1 | | | |
 | Slope Inverted 45° 2 x 1  | Dark Red
| 2 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4261785.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Dark Blue
| 2 | | | |
 | Slope 45° 2 x 4  | Dark Blue
| 1 | | | |
 | Slope 33° 3 x 2  | Dark Blue
| 2 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Black
| 2 | | | |
 | Plate 1 x 6  | Dark Blue
| 2 | | | |
 | Slope 18° 4 x 1  | Dark Brown
| 2 | | | |
 | Projectile, Spring Shooter Ammunition 8L Bar  | Trans-Red
| 2 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Reddish Brown
| 2 | | | |
![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585452.jpg) | Panel 1 x 2 x 3 [Side Supports / Hollow Studs]  | Black
| 2 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4217916.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Reddish Brown
| 2 | | | |
 | Windscreen 6 x 2 x 2 with Handle  | Trans-Clear
| 1 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 5 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Yellow
| 5 | | | |
 | Technic Pin 1/2  | Light Bluish Gray
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Neon Orange
| 3 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Black
| 3 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6337268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Light Bluish Gray
| 3 | | | |
 | Hinge Plate 1 x 4 Locking Dual 1 Finger  | Light Bluish Gray
| 3 | | | |
 | Bucket 1 x 1 x 1 Handle  | Pearl Gold
| 3 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth  | Light Bluish Gray
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 3 | | | |
 | Technic Bush  | Light Bluish Gray
| 3 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Reddish Brown
| 3 | | | |
 | Slope 45° 2 x 4  | Blue
| 1 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Light Bluish Gray
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Black
| 1 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Trans-Neon Orange
| 1 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Blue
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 9 | | | |
 | Technic Beam 2 x 4 L-Shape Thick  | Light Bluish Gray
| 2 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6069163.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Blue
| 2 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 2 | | | |
 | Slope 18° 4 x 1  | Black
| 2 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Blue
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2  | Blue
| 2 | | | |
 | Slope Curved 4 x 1 Inverted  | Black
| 2 | | | |
 | Wedge Curved Inverted 6 x 4  | Black
| 2 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474026.jpg) | Dish 2 x 2 Inverted [Radar]  | Black
| 2 | | | |
 | Plate 2 x 2  | Blue
| 2 | | | |
 | Hinge Plate 1 x 8 Locking with Angled Side Extensions, Squared Plate Underside, 7 Teeth  | Black
| 2 | | | |
 | Plate 2 x 2  | Light Bluish Gray
| 2 | | | |
 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)  | Black
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Blue
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6310268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Black
| 2 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Blue
| 2 | | | |
 | Plate 2 x 2 Corner  | Blue
| 2 | | | |
 | Plate 2 x 2  | Black
| 2 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Black
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408126.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Black
| 2 | | | |
 | Hinge Plate 1 x 8 Locking with Angled Side Extensions, Squared Plate Underside, 7 Teeth  | Black
| 2 | | | |
 | Brick Curved 6 x 1 Inverted  | Yellow
| 2 | | | |
 | Plate Special 1 x 4 with 2 Studs  | Red
| 2 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4210762.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Dark Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Brown
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2  | Dark Bluish Gray
| 2 | | | |
 | Plate Special 1 x 1 with Tooth  | Black
| 2 | | | |
 | Tile 1 x 6 with Groove  | Dark Blue
| 1 | | | |
 | Bar 6L with Stop Ring  | Black
| 1 | | | |
 | Tile 1 x 2 with Video Tape and Reels Print  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6335378.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]  | Light Bluish Gray
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3  | Light Bluish Gray
| 1 | | | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3  | Light Bluish Gray
| 1 | | | |
 | Technic Pin Connector Plate with One Hole (Single on Bottom)  | Black
| 1 | | | |
 | Launcher, 1 x 4 with 1 x 2 Plate with Pin Hole and Bucket (Catapult)  | Flat Silver
| 1 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 4 | | | |
 | Brick Special 1 x 1 with Clip Horizontal  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Light Bluish Gray
| 4 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Red
| 4 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4264008.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Orange
| 4 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 4 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/6021969.jpg) | Dish 2 x 2 Inverted [Radar]  | Dark Tan
| 1 | | | |
 | Tile 2 x 2 with Groove  | Yellow
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4142995.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Red
| 1 | | | |
 | Brick 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Groove  | Black
| 1 | | | |
 | Mudguard 2 x 4 with Molded Headlights  | Blue
| 2 | | | |
 | Tile 1 x 2 with Groove  | Magenta
| 2 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/0/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | Black
| 2 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | Black
| 2 | | | |
 | Technic Axle and Pin Connector Perpendicular  | Black
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Purple
| 2 | | | |
 | Tap 1 x 1 without Hole in Spout  | Red
| 2 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598528.jpg) | Plate Special 1 x 2 [Top Clip]  | Black
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278273.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598526.jpg) | Plate Special 1 x 2 [Top Clip]  | Light Bluish Gray
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 2 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole  | Black
| 2 | | | |
 | Slope 45° 2 x 2  | Bright Light Orange
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth  | Light Bluish Gray
| 2 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Blue
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6360036.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Red
| 2 | | | |
 | Tap 1 x 1 without Hole in Spout  | Red
| 2 | | | |
 | Plate 1 x 2  | Red
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Red
| 2 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6069171.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Bright Light Orange
| 2 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529236.jpg) | Cone 1 x 1 [Top Groove]  | Black
| 2 | | | |
 | Wedge Plate 4 Stud 45° Angle Plate  | Black
| 2 | | | |
 | Handlebars  | Dark Bluish Gray
| 2 | | | |
 | Equipment Handcuffs  | Light Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Red
| 2 | | | |
 | Plate Special 2 x 2 with 2 Pin Holes  | Black
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278273.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Light Bluish Gray
| 2 | | | |
 | Brick Special 2 x 2 with 2 Pins and Axle Hole  | Light Bluish Gray
| 2 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole  | Black
| 2 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598527.jpg) | Plate Special 1 x 2 [Top Clip]  | White
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 2 | | | |
 | Plate 1 x 1  | Trans-Orange
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Light Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 5.9mm Towball Socket  | Light Bluish Gray
| 2 | | | |
 | Plate 2 x 2  | Yellow
| 2 | | | |
 | Brick Arch 1 x 4  | Dark Bluish Gray
| 1 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6014615.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners]  | Light Bluish Gray
| 1 | | | |
 | Bracket 1 x 2 - 2 x 4  | Black
| 1 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Dark Red
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Red
| 1 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Trans-Light Blue
| 1 | | | |
 | Plate 2 x 4  | Light Bluish Gray
| 1 | | | |
 | Hinge Brick 2 x 2 Top Plate Thin  | Blue
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Light Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Black
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4211064.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Dark Bluish Gray
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Red
| 1 | | | |
 | Brick 2 x 2  | Dark Red
| 1 | | | |
 | Plate Special 10 x 10 Octagonal Opening  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 4  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 2  | Green
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/3006347.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Neon Orange
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | Light Bluish Gray
| 1 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029948.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Dark Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Groove  | Yellow
| 1 | | | |
 | Technic Bush  | Red
| 3 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 3 | | | |
 | Tap 1 x 1 without Hole in Spout  | Black
| 3 | | | |
![Image of part Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/6079036.jpg) | Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]  | Dark Bluish Gray
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Red
| 3 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Dark Bluish Gray
| 3 | | | |
 | Projectile, Spring Shooter Ammunition 8L Bar  | Trans-Red
| 1 | | | |
 | Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings  | Dark Bluish Gray
| 1 | | | |
 | Hinge Plate 2 x 4 with Pin Hole - Top  | Light Bluish Gray
| 1 | | | |
![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585452.jpg) | Panel 1 x 2 x 3 [Side Supports / Hollow Studs]  | Black
| 1 | | | |
 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End  | Black
| 1 | | | |
 | Plate 2 x 4  | Black
| 1 | | | |
 | Wedge Plate 4 x 9 with Stud Notches  | Bright Light Orange
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Red
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2  | Black
| 1 | | | |
 | Plate 2 x 3  | Dark Bluish Gray
| 1 | | | |
 | Wedge Curved Inverted 8 x 6 x 2 Cockpit  | Dark Blue
| 1 | | | |
 | Plate 2 x 4  | Black
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Red
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Blue
| 1 | | | |
 | Plate 2 x 2  | Medium Nougat
| 1 | | | |
 | Plate 1 x 2  | Dark Bluish Gray
| 1 | | | |
![Image of part Arm Mechanical with Clip [Thick Support]](https://cdn.rebrickable.com/media/parts/elements/6006740.jpg) | Arm Mechanical with Clip [Thick Support]  | Reddish Brown
| 1 | | | |
 | Plate 2 x 4  | Dark Red
| 1 | | | |
 | Hinge Plate 2 x 4 with Pin Hole - Top  | Light Bluish Gray
| 1 | | | |
 | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top  | Dark Bluish Gray
| 1 | | | |
 | Tool Hammer / Mallet Large  | Black
| 1 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Black
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Clear
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Red
| 1 | | | |
 | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes  | Black
| 1 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Dark Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211111.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Dark Bluish Gray
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4215339.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Light Blue
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Blue
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211111.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Dark Bluish Gray
| 1 | | | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4513174.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation]  | Red
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Light Bluish Gray
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2  | Red
| 1 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6310268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Black
| 1 | | | |
 | Handlebars  | Black
| 1 | | | |
![Image of part Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders]](https://cdn.rebrickable.com/media/parts/elements/4595708.jpg) | Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders]  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 4  | Tan
| 1 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 2 Notched  | Red
| 2 | | | |
 | Slope Curved 3 x 1 No Studs  | Magenta
| 2 | | | |
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg) | Technic Axle 5.5 with Stop [Rounded Short End]  | Dark Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 2 Notched  | Red
| 2 | | | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom  | Light Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On Top  | Dark Bluish Gray
| 2 | | | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6360035.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]  | Medium Nougat
| 2 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 2 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 2 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 2 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 2 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Black
| 1 | | | |
 | Tool Screwdriver and Spanner / Wrench  | Black
| 1 | | | |
 | Handlebars  | Light Bluish Gray
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Red
| 1 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146217.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | Red
| 1 | | | |
 | Brick Special 1 x 2 with Pin  | Dark Bluish Gray
| 1 | | | |
 | Brick Arch 1 x 6 Raised Arch  | Black
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Red
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/ldraw/1/3747b.png) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Blue
| 1 | | | |
 | Wedge Plate 4 x 4 with 2 x 2 Cutout  | Black
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4211632.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278274.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Dark Bluish Gray
| 1 | | | |
 | Hinge Plate 1 x 4 Locking Dual 1 Finger  | Light Bluish Gray
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | Lime
| 1 | | | |
 | Wedge Plate 2 x 4  | Dark Blue
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Bluish Gray
| 1 | | | |
 | Slope Inverted 45° 4 x 4 Double with 4 x 2 Recessed, 2 Holes  | Dark Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4125562.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin  | White
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Reddish Brown
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4211632.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 4 x 6 with Trap Door Hinge [Long Pins]](https://cdn.rebrickable.com/media/parts/elements/4595710.jpg) | Plate Special 4 x 6 with Trap Door Hinge [Long Pins]  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515368.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Black
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4594238.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]  | Light Bluish Gray
| 1 | | | |
 | Launcher Trigger, Weapon Gun Trigger  | Dark Bluish Gray
| 3 | | | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211865.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]  | Light Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Light Bluish Gray
| 1 | | | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top  | Light Bluish Gray
| 1 | | | |
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg) | Technic Axle 5.5 with Stop [Rounded Short End]  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4264008.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Orange
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4264008.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Orange
| 1 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611703.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]  | Dark Bluish Gray
| 1 | | | |
 | Slope 45° 2 x 2  | Yellow
| 1 | | | |
 | Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom  | Light Bluish Gray
| 1 | | | |
 | Technic Axle 4 with Stop  | Dark Bluish Gray
| 1 | | | |