 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky  | Dark Blue
| 2 | | | |
![Image of part Technic Pin Connector Round [No Slot]](https://cdn.rebrickable.com/media/parts/ldraw/0/75535.png) | Technic Pin Connector Round [No Slot]  | Black
| 8 | | | |
 | Plate Special 1 x 1 with Tooth  | Dark Green
| 10 | | | |
 | Baseplate 16 x 16  | Dark Bluish Gray
| 1 | | | |
![Image of part Weapon Harpoon [4 Grooves on Shaft]](https://cdn.rebrickable.com/media/parts/ldraw/383/57467.png) | Weapon Harpoon [4 Grooves on Shaft]  | Chrome Silver
| 4 | | | |
 | Weapon Pike / Spear Round End  | Pearl Light Gray
| 16 | | | |
 | Hose, Ribbed 7mm D. 14L / 11.2cm  | Yellow
| 6 | | | |
 | Slope 75° 2 x 1 x 3 with Open Stud  | Black
| 2 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, without Hole, 9 Teeth  | Black
| 18 | | | |
![Image of part Slope 75° 2 x 2 x 3 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4189348.jpg) | Slope 75° 2 x 2 x 3 [Hollow Studs]  | Yellow
| 4 | | | |
 | Technic Pin 3/4  | Dark Bluish Gray
| 29 | | | |
 | Baseplate 16 x 32  | Dark Bluish Gray
| 1 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Yellow
| 1 | | | |
 | Brick Round Corner 2 x 2 Macaroni with Stud Notch  | Yellow
| 6 | | | |
 | Plate Special 6 x 6 x 2/3 Cross with Dome  | Light Bluish Gray
| 1 | | | |
![Image of part Tool Screwdriver with Narrow Head [6-Rib Handle]](https://cdn.rebrickable.com/media/parts/ldraw/0/55298.png) | Tool Screwdriver with Narrow Head [6-Rib Handle]  | Black
| 1 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Red
| 2 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Red
| 2 | | | |
 | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots  | Black
| 4 | | | |
 | Hose, Ribbed 7mm D. 14L / 11.2cm  | Black
| 2 | | | |
 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky  | Dark Red
| 2 | | | |
 | Technic Block 3 x 5 x 1 2/3  | Black
| 1 | | | |
 | Wedge Curved 8 x 3 x 2 Open Left  | Trans-Light Blue
| 1 | | | |
 | Tile 1 x 2 with Avionics Copper, Red & Silver Print  | Black
| 1 | | | |
 | Cylinder Hemisphere 2 x 2 Ball Turret Socket Base  | Dark Blue
| 2 | | | |
 | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole  | Black
| 1 | | | |
 | Rock Panel Rectangular 4 x 10 x 6 (aka BURP)  | Dark Bluish Gray
| 1 | | | |
 | Plant, Sea Grass  | Trans-Green
| 4 | | | |
![Image of part Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top], Rotation Joint Socket](https://cdn.rebrickable.com/media/parts/elements/4285877.jpg) | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top], Rotation Joint Socket  | Black
| 2 | | | |
 | Fairing 1 x 4 Side Flaring Intake with Two Pins  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/320/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | Dark Red
| 4 | | | |
 | Technic Axle Connector 2 x 3 with Ball Socket, Open Sides  | Black
| 2 | | | |
![Image of part Technic Pin Connector Round [No Slot]](https://cdn.rebrickable.com/media/parts/ldraw/4/75535.png) | Technic Pin Connector Round [No Slot]  | Red
| 2 | | | |
 | Technic Gear 12 Tooth Bevel  | Light Bluish Gray
| 1 | | | |
![Image of part Technic Axle Connector Ridged [with x Hole x Orientation]](https://cdn.rebrickable.com/media/parts/elements/4210672.jpg) | Technic Axle Connector Ridged [with x Hole x Orientation]  | Dark Bluish Gray
| 2 | | | |
![Image of part Panel 1 x 2 x 3 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4211577.jpg) | Panel 1 x 2 x 3 [Hollow Studs]  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 4 with Black Diagonal Stripes Print  | Yellow
| 3 | | | |
 | Rock Panel Triangular 3 x 8 x 7 (aka LURP)  | Dark Bluish Gray
| 1 | | | |
 | Arm Skeleton  | White
| 2 | | | |
 | Arm Skeleton  | White
| 2 | | | |
![Image of part Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]](https://cdn.rebrickable.com/media/parts/elements/4199297.jpg) | Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]  | Yellow
| 1 | | | |
![Image of part Equipment Dish / Plate / Bowl 3 x 3 [Plain]](https://cdn.rebrickable.com/media/parts/elements/4287800.jpg) | Equipment Dish / Plate / Bowl 3 x 3 [Plain]  | Metallic Gold
| 1 | | | |
 | Plate 8 x 8  | Black
| 2 | | | |
 | Brick 2 x 10  | Black
| 4 | | | |
 | Windscreen 6 x 4 x 2 Wedge Curved  | Trans-Brown
| 1 | | | |
![Image of part Panel 1 x 4 x 3 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/3000742.jpg) | Panel 1 x 4 x 3 [Hollow Studs]  | Trans-Light Blue
| 2 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Light Bluish Gray
| 1 | | | |
![Image of part Tool Wrench / Spanner, Box [6-Rib Handle]](https://cdn.rebrickable.com/media/parts/ldraw/0/55300.png) | Tool Wrench / Spanner, Box [6-Rib Handle]  | Black
| 1 | | | |
 | Money / Coin with "10" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "10" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "10" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "10" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Weapon Pike / Spear Round End  | Pearl Light Gray
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/601926.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Black
| 7 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Light Bluish Gray
| 1 | | | |
 | Flexible Hose 8.5L with Tabbed Ends Black (Ends different color than Tube)  | Yellow
| 2 | | | |
 | Brick Special 1 x 1 with Handle  | Yellow
| 6 | | | |
 | Hose, Ribbed 7mm D. 7L / 5.6cm  | Pearl Light Gray
| 2 | | | |
![Image of part Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]](https://cdn.rebrickable.com/media/parts/elements/4193108.jpg) | Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]  | Black
| 4 | | | |
![Image of part Support 2 x 4 x 5 Stanchion Inclined [5mm wide posts]](https://cdn.rebrickable.com/media/parts/elements/4142130.jpg) | Support 2 x 4 x 5 Stanchion Inclined [5mm wide posts]  | Yellow
| 5 | | | |
 | Money / Coin with "40" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "40" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "40" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "40" Sans-serif Type  | Chrome Gold
| 1 | | | |
![Image of part Technic Wedge Belt Wheel [aka Pulley]](https://cdn.rebrickable.com/media/parts/elements/418524.jpg) | Technic Wedge Belt Wheel [aka Pulley]  | Yellow
| 4 | | | |
 | Wedge Sloped 45° 2 x 4 Triple  | Dark Blue
| 4 | | | |
 | Brick Arch 1 x 6 x 2 - Thick Top with Reinforced Underside  | Yellow
| 1 | | | |
 | Wedge 4 x 2 Left  | Yellow
| 4 | | | |
 | Money / Coin with "30" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "30" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "30" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "30" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove  | Red
| 6 | | | |
 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole  | Dark Blue
| 8 | | | |
![Image of part Minifig Head Harry Osborn / Aquaraider / Knight / Dwarf, Brown Eyebrows, Vertical Cheek Lines, Chin Dimple Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/4215503.jpg) | Minifig Head Harry Osborn / Aquaraider / Knight / Dwarf, Brown Eyebrows, Vertical Cheek Lines, Chin Dimple Print [Blocked Open Stud]  | Yellow
| 1 | | | |
![Image of part Minifig Head Harry Osborn / Aquaraider / Knight / Dwarf, Brown Eyebrows, Vertical Cheek Lines, Chin Dimple Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/4215503.jpg) | Minifig Head Harry Osborn / Aquaraider / Knight / Dwarf, Brown Eyebrows, Vertical Cheek Lines, Chin Dimple Print [Blocked Open Stud]  | Yellow
| 1 | | | |
 | Weapon Spear Gun with Rounded Trigger and Thin Spear Base  | Dark Bluish Gray
| 3 | | | |
 | Wedge Curved 8 x 3 x 2 Open Left  | Yellow
| 1 | | | |
 | Money / Coin with "20" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "20" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "20" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Money / Coin with "20" Sans-serif Type  | Chrome Gold
| 1 | | | |
 | Minifig Head Skeleton, Evil Skull Print  | White
| 1 | | | |
 | Minifig Head Skeleton, Evil Skull Print  | White
| 1 | | | |
 | Minifig Head Skeleton, Evil Skull Print  | White
| 1 | | | |
 | Wedge Curved 8 x 3 x 2 Open Right  | Trans-Light Blue
| 1 | | | |
 | Technic Axle Connector Hub with 4 Bars at 90°  | Dark Bluish Gray
| 1 | | | |
![Image of part Torso Skeleton [Thin Shoulder Pins]](https://cdn.rebrickable.com/media/parts/elements/626001.jpg) | Torso Skeleton [Thin Shoulder Pins]  | White
| 1 | | | |
![Image of part Torso Skeleton [Thin Shoulder Pins]](https://cdn.rebrickable.com/media/parts/elements/626001.jpg) | Torso Skeleton [Thin Shoulder Pins]  | White
| 1 | | | |
 | Slope Curved 2 x 2 No Studs - 3 Recessed Side Ports  | Black
| 4 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Yellow
| 3 | | | |
![Image of part Technic Pin Connector Round [No Slot]](https://cdn.rebrickable.com/media/parts/ldraw/14/75535.png) | Technic Pin Connector Round [No Slot]  | Yellow
| 1 | | | |
 | Rock 1 x 1 Crystal 5 Point  | Trans-Medium Blue
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Tan
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/ldraw/71/4085c.png) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Light Bluish Gray
| 4 | | | |
 | Brick 2 x 8  | Yellow
| 5 | | | |
 | Dish 6 x 6 Inverted (Radar) with Hollow Studs  | Light Bluish Gray
| 1 | | | |
 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section  | Dark Red
| 8 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408521.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Red
| 10 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6102786.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]  | Red
| 6 | | | |
 | Slope 75° 2 x 1 x 3 with Open Stud  | Dark Bluish Gray
| 1 | | | |
 | Slope 75° 2 x 1 x 3 with Open Stud  | Dark Bluish Gray
| 1 | | | |
 | Tap 1 x 1 with Hole in Spout  | Black
| 3 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 2 | | | |
 | Arm Skeleton  | White
| 1 | | | |
 | Arm Skeleton  | White
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth  | Black
| 20 | | | |
![Image of part Minifig Footwear Flipper [Thin]](https://cdn.rebrickable.com/media/parts/ldraw/0/59275a.png) | Minifig Footwear Flipper [Thin]  | Black
| 10 | | | |
![Image of part Panel 1 x 2 x 1 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/4211515.jpg) | Panel 1 x 2 x 1 [Square Corners]  | Light Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Dark Blue
| 24 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/601926.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Black
| 4 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole, 9 Teeth  | Black
| 12 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4210647.jpg) | Cone 1 x 1 [No Top Groove]  | Dark Bluish Gray
| 2 | | | |
![Image of part Arm Mechanical with Clip [Thin Support]](https://cdn.rebrickable.com/media/parts/elements/4294995.jpg) | Arm Mechanical with Clip [Thin Support]  | Dark Green
| 2 | | | |
![Image of part Panel 1 x 2 x 1 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/486524.jpg) | Panel 1 x 2 x 1 [Square Corners]  | Yellow
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408524.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Yellow
| 4 | | | |
 | Wedge 4 x 2 Right  | Yellow
| 4 | | | |
 | Brick 1 x 2 x 2 with Inside Axle Holder  | Yellow
| 5 | | | |
 | Weapon Spear Gun with Rounded Trigger and Thin Spear Base  | Dark Bluish Gray
| 2 | | | |
 | Weapon Spear Gun with Rounded Trigger and Thin Spear Base  | Dark Bluish Gray
| 2 | | | |
 | Weapon Spear Gun with Rounded Trigger and Thin Spear Base  | Dark Bluish Gray
| 2 | | | |
 | Weapon Spear Gun with Rounded Trigger and Thin Spear Base  | Dark Bluish Gray
| 2 | | | |
![Image of part Panel 1 x 4 x 3 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/3000742.jpg) | Panel 1 x 4 x 3 [Hollow Studs]  | Trans-Light Blue
| 1 | | | |
 | Hinge Panel 2 x 4 x 3 1/3 Locking Dual 2 Fingers  | Yellow
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/ldraw/71/4085c.png) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Light Bluish Gray
| 3 | | | |
 | Tile 2 x 2 with Black Trident Print  | Yellow
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/4216973.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Dark Bluish Gray
| 4 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder  | Black
| 6 | | | |
 | Tap 1 x 1 with Hole in Spout  | Light Bluish Gray
| 1 | | | |
 | Wedge Sloped Inverted 6 x 4 with 2 Stud Connections  | Yellow
| 2 | | | |
 | Technic Axle 3 with Stud  | Dark Bluish Gray
| 3 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove  | White
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 20 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | Yellow
| 10 | | | |
 | Brick 1 x 2 x 2 with Inside Axle Holder  | Light Bluish Gray
| 3 | | | |
![Image of part Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4499434.jpg) | Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]  | Black
| 1 | | | |
 | Technic Pin Long without Friction Ridges - Single Slot  | Light Bluish Gray
| 1 | | | |
![Image of part Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4499434.jpg) | Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]  | Black
| 1 | | | |
![Image of part Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4499434.jpg) | Launcher, Technic Competition Cannon Flat Bottom [Complete Assembly]  | Black
| 1 | | | |
 | Brick 2 x 3  | Light Bluish Gray
| 7 | | | |
![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4107558.jpg) | Technic Brick 1 x 14 [13 Pin Holes]  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4107558.jpg) | Technic Brick 1 x 14 [13 Pin Holes]  | Black
| 2 | | | |
 | Wedge Curved 10 x 3 Left  | Dark Bluish Gray
| 1 | | | |
 | Technic Brick 4 x 4 with 2 x 2 Opening  | Black
| 1 | | | |
 | Tread Small (20 Links)  | Black
| 2 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth  | Black
| 8 | | | |
 | Brick 1 x 10  | Light Bluish Gray
| 3 | | | |
 | Dome Hemisphere 3 x 3 Ball Turret with Marbled Red Pattern  | White
| 2 | | | |
 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges  | Dark Bluish Gray
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/4211518.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Light Bluish Gray
| 2 | | | |
 | Brick 1 x 1 x 5 with Blocked Open or Hollow Stud  | Yellow
| 2 | | | |
 | Plant, Sea Grass  | Trans-Green
| 1 | | | |
 | Plant, Sea Grass  | Trans-Green
| 1 | | | |
 | Plant, Sea Grass  | Trans-Green
| 1 | | | |
 | Hinge Panel 2 x 4 x 3 1/3 Locking Dual 2 Fingers  | Yellow
| 3 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389424.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | Yellow
| 6 | | | |
 | Weapon Pike / Spear Round End  | Black
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618843.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Dark Blue
| 8 | | | |
 | Brick Special 1 x 1 with Headlight  | Light Bluish Gray
| 8 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/4216973.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Dark Bluish Gray
| 3 | | | |
 | Minifig Head, Smirk, Pupils, Stubble Beard and Moustache and Sideburns Print  | Yellow
| 1 | | | |
 | Minifig Head, Smirk, Pupils, Stubble Beard and Moustache and Sideburns Print  | Yellow
| 1 | | | |
 | Minifig Head, Smirk, Pupils, Stubble Beard and Moustache and Sideburns Print  | Yellow
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth  | Black
| 7 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4188820.jpg) | Cone 1 x 1 [No Top Groove]  | Green
| 3 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 2 | | | |
![Image of part Minifig Footwear Flipper [Thin]](https://cdn.rebrickable.com/media/parts/ldraw/0/59275a.png) | Minifig Footwear Flipper [Thin]  | Black
| 6 | | | |
![Image of part Minifig Head Aquaraider / Knight / Dwarf / Dracus / Astronaut, Male Scar Across Lip, Angry Black Eyebrows and Messy Hair Print (Dracus) [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/4294864.jpg) | Minifig Head Aquaraider / Knight / Dwarf / Dracus / Astronaut, Male Scar Across Lip, Angry Black Eyebrows and Messy Hair Print (Dracus) [Blocked Open Stud]  | Yellow
| 1 | | | |
![Image of part Minifig Head Aquaraider / Knight / Dwarf / Dracus / Astronaut, Male Scar Across Lip, Angry Black Eyebrows and Messy Hair Print (Dracus) [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/4294864.jpg) | Minifig Head Aquaraider / Knight / Dwarf / Dracus / Astronaut, Male Scar Across Lip, Angry Black Eyebrows and Messy Hair Print (Dracus) [Blocked Open Stud]  | Yellow
| 1 | | | |
![Image of part Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders]](https://cdn.rebrickable.com/media/parts/elements/4215616.jpg) | Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders]  | Yellow
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | Yellow
| 19 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Black
| 8 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Yellow
| 8 | | | |
 | Technic Axle 3 with Stud  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 3 with Stud  | Dark Bluish Gray
| 2 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/458926.jpg) | Cone 1 x 1 [No Top Groove]  | Black
| 2 | | | |
 | Large Figure Weapon Trident, with Long Axle  | Black
| 2 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/458926.jpg) | Cone 1 x 1 [No Top Groove]  | Black
| 2 | | | |
 | Plate 1 x 8  | Dark Bluish Gray
| 4 | | | |
 | Plate 1 x 2  | Black
| 11 | | | |
 | Plate 1 x 2  | Light Bluish Gray
| 11 | | | |
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370224.jpg) | Technic Brick 1 x 8 [7 Pin Holes]  | Yellow
| 2 | | | |
 | Brick Arch 1 x 3 x 2 Curved Top  | Dark Bluish Gray
| 2 | | | |
 | Brick Special 1 x 1 with Handle  | Yellow
| 2 | | | |
 | Steering Wheel Small, 2 x 2  | Black
| 4 | | | |
![Image of part Engine Smooth Large [2 x 2 Thin Top Plate]](https://cdn.rebrickable.com/media/parts/elements/4100559.jpg) | Engine Smooth Large [2 x 2 Thin Top Plate]  | Yellow
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Tan
| 17 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]](https://cdn.rebrickable.com/media/parts/elements/4211505.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]  | Light Bluish Gray
| 3 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]](https://cdn.rebrickable.com/media/parts/elements/4211505.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]  | Light Bluish Gray
| 3 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Black
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Scuba Airtank, Bar Holder  | Dark Bluish Gray
| 1 | | | |
![Image of part Tool Hammer Cross Pein [6-Rib Handle]](https://cdn.rebrickable.com/media/parts/ldraw/0/55295.png) | Tool Hammer Cross Pein [6-Rib Handle]  | Black
| 1 | | | |
 | Brick 1 x 10  | Yellow
| 2 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 5 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Blue
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Blue
| 16 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366024.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Yellow
| 16 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/601926.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Black
| 2 | | | |
 | Tile 1 x 4 with Groove  | Light Bluish Gray
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/601926.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]  | Black
| 2 | | | |
![Image of part Wedge Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/4210906.jpg) | Wedge Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs]  | Dark Bluish Gray
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Black
| 6 | | | |
 | Projectile, Technic Competition Arrow, Liftarm Shaft with Hollow Black Rubber End  | Light Bluish Gray
| 1 | | | |
![Image of part Equipment Whip [aka Plant Vine]](https://cdn.rebrickable.com/media/parts/elements/248826.jpg) | Equipment Whip [aka Plant Vine]  | Black
| 1 | | | |
 | Projectile, Technic Competition Arrow, Liftarm Shaft with Hollow Black Rubber End  | Light Bluish Gray
| 1 | | | |
 | Projectile, Technic Competition Arrow, Liftarm Shaft with Hollow Black Rubber End  | Light Bluish Gray
| 1 | | | |
 | Wedge Curved 8 x 3 x 2 Open Right  | Yellow
| 1 | | | |
 | Weapon Spear Gun with Rounded Trigger and Thin Spear Base  | Dark Bluish Gray
| 1 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | Pearl Light Gray
| 3 | | | |
 | Minifig Head, Stubble, Black Messy Hair Print  | Yellow
| 1 | | | |
 | Plate 4 x 12  | Black
| 1 | | | |
 | Minifig Head, Stubble, Black Messy Hair Print  | Yellow
| 1 | | | |
 | Minifig Head, Stubble, Black Messy Hair Print  | Yellow
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408521.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Red
| 4 | | | |
 | Slope Curved 3 x 1 No Studs  | Black
| 4 | | | |
![Image of part Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370226.jpg) | Technic Brick 1 x 8 [7 Pin Holes]  | Black
| 2 | | | |
 | Tile 2 x 2 with Black Trident Print  | Yellow
| 1 | | | |
 | Plate 6 x 10  | Black
| 1 | | | |
 | Brick Special 1 x 2 with Pin  | Dark Bluish Gray
| 14 | | | |
 | Brick 2 x 3  | Yellow
| 6 | | | |
 | Slope 45° 2 x 2  | Light Bluish Gray
| 6 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Black
| 6 | | | |
![Image of part Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders]](https://cdn.rebrickable.com/media/parts/elements/347526.jpg) | Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders]  | Black
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Black
| 2 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://cdn.rebrickable.com/media/parts/elements/244426.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]  | Black
| 2 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/4211358.jpg) | Bracket 1 x 2 - 1 x 4 [Square Corners]  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://cdn.rebrickable.com/media/parts/elements/244426.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]  | Black
| 2 | | | |
![Image of part Arm Mechanical with Clip [Thin Support]](https://cdn.rebrickable.com/media/parts/elements/4294996.jpg) | Arm Mechanical with Clip [Thin Support]  | Black
| 3 | | | |
 | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End, 9 Teeth  | Black
| 3 | | | |
![Image of part Arm Mechanical with 2 Clips [Battle Droid]](https://cdn.rebrickable.com/media/parts/elements/4211658.jpg) | Arm Mechanical with 2 Clips [Battle Droid]  | Light Bluish Gray
| 3 | | | |
![Image of part Arm Mechanical with 2 Clips [Battle Droid]](https://cdn.rebrickable.com/media/parts/elements/4211658.jpg) | Arm Mechanical with 2 Clips [Battle Droid]  | Light Bluish Gray
| 3 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Light Bluish Gray
| 10 | | | |
 | Brick Curved 6 x 1 Inverted  | Yellow
| 10 | | | |
 | Plate 1 x 2  | Black
| 8 | | | |
 | Propeller 8 Blade 5 Diameter  | Light Bluish Gray
| 2 | | | |
 | Box / Crate with Handholds 3 x 4 x 1 2/3  | Reddish Brown
| 1 | | | |
![Image of part Minifig Footwear Flipper [Thin]](https://cdn.rebrickable.com/media/parts/ldraw/0/59275a.png) | Minifig Footwear Flipper [Thin]  | Black
| 4 | | | |
![Image of part Minifig Footwear Flipper [Thin]](https://cdn.rebrickable.com/media/parts/ldraw/0/59275a.png) | Minifig Footwear Flipper [Thin]  | Black
| 4 | | | |
 | Plate 1 x 3  | Black
| 4 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6102782.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]  | Black
| 4 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 13 | | | |
![Image of part Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]](https://cdn.rebrickable.com/media/parts/elements/4193108.jpg) | Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]  | Black
| 1 | | | |
 | Tile 1 x 1 with White and Red Gauge Print  | Light Bluish Gray
| 3 | | | |
 | Plate 1 x 8  | Black
| 3 | | | |
![Image of part Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]](https://cdn.rebrickable.com/media/parts/elements/4193108.jpg) | Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [4 Locking Ridges]  | Black
| 1 | | | |
 | Leg Skeleton  | White
| 2 | | | |
 | Leg Skeleton  | White
| 2 | | | |
 | Wedge Curved 10 x 3 Right  | Dark Bluish Gray
| 1 | | | |
 | Weapon Gun / Flintlock / Musket (Pirate)  | Reddish Brown
| 1 | | | |
 | Brick 1 x 2  | Yellow
| 12 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole  | Black
| 12 | | | |
 | Plate 1 x 4  | Dark Blue
| 9 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 18 | | | |
 | Wedge Plate 4 x 2 Left  | Light Bluish Gray
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Light Bluish Gray
| 2 | | | |
 | Wedge 4 x 2 Left  | Yellow
| 1 | | | |
 | Brick 1 x 4  | Black
| 3 | | | |
 | Plate 2 x 6  | Black
| 4 | | | |
 | Brick 1 x 4  | Yellow
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Light Bluish Gray
| 7 | | | |
 | Plate 1 x 4  | Black
| 7 | | | |
![Image of part Technic Brick Special 2 x 3 with Pin Holes, Rotation Joint Ball Half [Horizontal Top], Rotation Joint Socket](https://cdn.rebrickable.com/media/parts/elements/4218105.jpg) | Technic Brick Special 2 x 3 with Pin Holes, Rotation Joint Ball Half [Horizontal Top], Rotation Joint Socket  | Yellow
| 2 | | | |
 | Brick 2 x 2 Corner  | Dark Blue
| 2 | | | |
 | Plate 6 x 8  | Black
| 1 | | | |
 | Tap 1 x 1 with Hole in Spout  | Black
| 1 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Dark Bluish Gray
| 1 | | | |
 | Technic Brick Modified 2 x 2 with Solid Ball and Axle Hole  | Dark Bluish Gray
| 2 | | | |
 | Brick Curved 6 x 1 Inverted  | Light Bluish Gray
| 2 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Dark Bluish Gray
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth  | Red
| 8 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408526.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Black
| 2 | | | |
![Image of part Technic Axle Connector Ridged [with x Hole x Orientation]](https://cdn.rebrickable.com/media/parts/elements/4211543.jpg) | Technic Axle Connector Ridged [with x Hole x Orientation]  | Light Bluish Gray
| 1 | | | |
 | Slope 65° 2 x 2 x 2 with Bottom Tube  | Light Bluish Gray
| 4 | | | |
 | Brick Round 2 x 2 x 1 2/3 Dome Top, Blocked Open Stud  | Trans-Clear
| 4 | | | |
 | Brick Curved 6 x 1  | Yellow
| 4 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618843.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Dark Blue
| 4 | | | |
 | Plate 1 x 1  | Dark Bluish Gray
| 6 | | | |
![Image of part Brick Special 1 x 2 with Vertical Clip [Thick U Clip]](https://cdn.rebrickable.com/media/parts/ldraw/14/30237.png) | Brick Special 1 x 2 with Vertical Clip [Thick U Clip]  | Yellow
| 6 | | | |
 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End  | Black
| 6 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole  | Black
| 10 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder  | Yellow
| 5 | | | |
 | Bar 1L with Clip  | Dark Bluish Gray
| 10 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
 | Tile 1 x 6 with Groove  | Dark Bluish Gray
| 2 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
 | Flag 2 x 2 Trapezoid with Flat Area between Clips  | Blue
| 2 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Bar 1 x 3 [Clip / Anti-Stud]](https://cdn.rebrickable.com/media/parts/elements/4141580.jpg) | Bar 1 x 3 [Clip / Anti-Stud]  | Black
| 2 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
![Image of part Helmet, Standard with Blue Trident Print [Aquaraiders II]](https://cdn.rebrickable.com/media/parts/elements/4500440.jpg) | Helmet, Standard with Blue Trident Print [Aquaraiders II]  | Black
| 1 | | | |
 | Tile 1 x 2 with Groove  | Light Bluish Gray
| 3 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370124.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Yellow
| 3 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 3 | | | |
 | Slope Curved 2 x 2 No Studs - 3 Recessed Side Ports  | Yellow
| 3 | | | |
 | Tool Drill, Electric  | Black
| 1 | | | |
![Image of part Tool Oil Can [Smooth Handle]](https://cdn.rebrickable.com/media/parts/ldraw/0/55296.png) | Tool Oil Can [Smooth Handle]  | Black
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Light Bluish Gray
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Black
| 4 | | | |
 | Plate 2 x 6  | Dark Bluish Gray
| 4 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Black
| 4 | | | |
![Image of part Arm Mechanical with Clip [Thin Support]](https://cdn.rebrickable.com/media/parts/elements/4294996.jpg) | Arm Mechanical with Clip [Thin Support]  | Black
| 2 | | | |
 | Technic Axle 8  | Black
| 2 | | | |
 | Technic Axle 8  | Black
| 2 | | | |
 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky  | Dark Green
| 2 | | | |
 | Technic Beam 1 x 2 Thick  | Black
| 2 | | | |
 | Technic Beam 1 x 2 Thick  | Black
| 2 | | | |
 | Technic Pin Double with Axle Hole  | Black
| 2 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder  | Black
| 2 | | | |
 | Flag 5 x 6 Hexagonal with C Clips  | Yellow
| 1 | | | |
 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky  | Dark Green
| 2 | | | |
 | Plate 4 x 8  | Black
| 1 | | | |
 | Plate 2 x 6  | Black
| 3 | | | |
 | Plate 2 x 6  | Red
| 3 | | | |
 | Wedge Sloped 45° 2 x 4 Triple with Red Scale Print  | Black
| 1 | | | |
 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth  | Black
| 2 | | | |
 | Plate 1 x 8  | Light Bluish Gray
| 2 | | | |
 | Brick 2 x 4  | Black
| 2 | | | |
 | Plate 4 x 4  | Dark Bluish Gray
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth  | White
| 2 | | | |
 | Brick Curved 2 x 4 x 1 1/3  | Yellow
| 2 | | | |
 | Brick 2 x 6  | Yellow
| 2 | | | |
 | Wedge Plate 3 x 2 Left  | Yellow
| 2 | | | |
 | Tile 1 x 1 with White and Red Gauge Print  | Light Bluish Gray
| 2 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Red
| 5 | | | |
 | Plate 2 x 4  | Black
| 5 | | | |
 | Bracket 1 x 2 - 2 x 2  | Black
| 5 | | | |
 | Plate 2 x 4  | Black
| 5 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Dark Bluish Gray
| 5 | | | |
 | Plate 1 x 2  | Red
| 8 | | | |
 | Plate Special 1 x 1 with Tooth  | Black
| 6 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]](https://cdn.rebrickable.com/media/parts/elements/4171666.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]  | Yellow
| 6 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | White
| 8 | | | |
 | Plate 1 x 2  | Red
| 8 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Green
| 8 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Black
| 2 | | | |
 | Hinge Brick 1 x 2 Base  | Black
| 2 | | | |
![Image of part Wedge Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/4210906.jpg) | Wedge Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs]  | Dark Bluish Gray
| 1 | | | |
 | Plate 1 x 10  | Black
| 2 | | | |
 | Hinge Brick 1 x 2 Base  | Black
| 2 | | | |
 | Tile 1 x 2 with Groove  | Dark Bluish Gray
| 3 | | | |
![Image of part Tool Wrench / Spanner Open End [6-Rib Handle]](https://cdn.rebrickable.com/media/parts/ldraw/0/55299.png) | Tool Wrench / Spanner Open End [6-Rib Handle]  | Black
| 1 | | | |
 | Wedge 4 x 2 Right  | Yellow
| 1 | | | |
![Image of part Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]](https://cdn.rebrickable.com/media/parts/elements/4199601.jpg) | Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges]  | Trans-Brown
| 1 | | | |
 | Plate 4 x 6  | Black
| 1 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | White
| 11 | | | |
 | Tail Shuttle, Small with Double-Sided Black Trident and Sub Deep Diving Print  | Yellow
| 1 | | | |
 | Animal, Snake, Small  | Red
| 2 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389426.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | Black
| 2 | | | |
 | Brick Special 1 x 1 with Headlight  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211441.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408521.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Red
| 2 | | | |
 | Tail Shuttle, Small with Double-Sided Black Trident and Sub Deep Diving Print  | Yellow
| 1 | | | |
 | Slope Curved 3 x 1 No Studs  | Black
| 2 | | | |
 | Plate 4 x 10  | Dark Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Green
| 7 | | | |
 | Plate 1 x 6  | Dark Bluish Gray
| 3 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Dark Bluish Gray
| 7 | | | |
 | Tile 1 x 1 with Groove  | Light Bluish Gray
| 3 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Bluish Gray
| 7 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/4211358.jpg) | Bracket 1 x 2 - 1 x 4 [Square Corners]  | Light Bluish Gray
| 1 | | | |
 | Animal, Crab  | Bright Light Orange
| 1 | | | |
 | Barrel 2 x 2 x 2  | Reddish Brown
| 1 | | | |
 | Brick 1 x 6  | Light Bluish Gray
| 1 | | | |
 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes  | Light Bluish Gray
| 4 | | | |
 | Plate 2 x 2 Corner  | Black
| 4 | | | |
 | Slope Inverted 34° 3 x 1 with Internal Stopper  | Black
| 4 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder  | Red
| 4 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Black
| 4 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Blue
| 4 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Bluish Gray
| 4 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 5 | | | |
 | Plate 2 x 2  | Light Bluish Gray
| 5 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/2/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | Green
| 4 | | | |
 | Technic Axle Connector with Axle Hole  | Yellow
| 4 | | | |
 | Plate 1 x 2  | Dark Bluish Gray
| 4 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Yellow
| 10 | | | |
 | Propeller 8 Blade 5 Diameter  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 6  | Black
| 1 | | | |
 | Brick 1 x 8  | Yellow
| 1 | | | |
 | Plate 4 x 6  | Light Bluish Gray
| 1 | | | |
 | Wedge Curved Inverted 10 x 6 x 2 Cockpit  | White
| 1 | | | |
 | Slope Curved 3 x 1 No Studs  | Yellow
| 2 | | | |
![Image of part Minifig Footwear Flipper [Thin]](https://cdn.rebrickable.com/media/parts/ldraw/0/59275a.png) | Minifig Footwear Flipper [Thin]  | Black
| 2 | | | |
![Image of part Minifig Footwear Flipper [Thin]](https://cdn.rebrickable.com/media/parts/ldraw/0/59275a.png) | Minifig Footwear Flipper [Thin]  | Black
| 2 | | | |
 | Plate 1 x 2  | Trans-Clear
| 2 | | | |
 | Slope Curved 3 x 1 No Studs  | Yellow
| 2 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 2 | | | |
 | Technic Beam 1 x 4 Thin with Stud Connector  | Black
| 2 | | | |
 | Plate 2 x 8  | Red
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | Yellow
| 2 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole  | Black
| 6 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 9 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Yellow
| 6 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | White
| 9 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | White
| 9 | | | |
 | Plate 2 x 4  | Light Bluish Gray
| 3 | | | |
 | Brick 1 x 2  | White
| 3 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Black
| 6 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Black
| 2 | | | |
 | Tile 1 x 4 with Groove  | Yellow
| 2 | | | |
 | Brick 1 x 4  | Yellow
| 2 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation  | Yellow
| 2 | | | |
![Image of part Technic Axle Connector Double Flexible [Rubber]](https://cdn.rebrickable.com/media/parts/elements/4198367.jpg) | Technic Axle Connector Double Flexible [Rubber]  | Black
| 2 | | | |
 | Brick Curved 6 x 1  | Dark Bluish Gray
| 2 | | | |
 | Technic Beam 1 x 2 Thick  | Yellow
| 2 | | | |
 | Tile 1 x 6 with Groove  | Yellow
| 2 | | | |
 | Brick Curved 6 x 1  | Black
| 2 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]](https://cdn.rebrickable.com/media/parts/elements/4501109.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]  | Yellow
| 1 | | | |
 | Brick 2 x 4  | Dark Bluish Gray
| 1 | | | |
 | Wedge Curved Inverted 6 x 2 Left  | Yellow
| 1 | | | |
 | Technic Axle 2 Notched  | Red
| 8 | | | |
 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)  | Light Bluish Gray
| 4 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Black
| 4 | | | |
 | Wedge Plate 4 x 2 Left  | Black
| 4 | | | |
 | Wedge Plate 4 x 2 Right  | Black
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408526.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Black
| 1 | | | |
 | Knitted Cap  | Dark Bluish Gray
| 1 | | | |
 | Knitted Cap  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Blue
| 1 | | | |
![Image of part Wedge Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/485501.jpg) | Wedge Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs]  | White
| 1 | | | |
 | Knitted Cap  | Dark Bluish Gray
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618843.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Dark Blue
| 2 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618843.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Dark Blue
| 2 | | | |
 | Wedge Plate 8 x 8 Cut Corner  | Black
| 2 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Dark Bluish Gray
| 2 | | | |
 | Brick Curved 6 x 1  | Yellow
| 2 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Dark Bluish Gray
| 2 | | | |
 | Brick Curved 6 x 1  | Yellow
| 2 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618848.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Green
| 2 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | Dark Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Green
| 5 | | | |
 | Plate 2 x 4  | Black
| 3 | | | |
 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End  | Black
| 3 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Yellow
| 5 | | | |
 | Plate 2 x 4  | Yellow
| 3 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4211632.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Light Bluish Gray
| 5 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Bluish Gray
| 3 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 3 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Black
| 5 | | | |
 | Tail Shuttle  | Dark Bluish Gray
| 3 | | | |
 | Technic Axle 4  | Black
| 5 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Bluish Gray
| 3 | | | |
 | Technic Bush  | Light Bluish Gray
| 5 | | | |
 | Plate 1 x 4  | Yellow
| 3 | | | |
 | Plate 1 x 4  | Yellow
| 3 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Bluish Gray
| 3 | | | |
 | Plate 1 x 2  | Trans-Red
| 5 | | | |
![Image of part Bar 1 x 3 [Clip / Anti-Stud]](https://cdn.rebrickable.com/media/parts/elements/4141580.jpg) | Bar 1 x 3 [Clip / Anti-Stud]  | Black
| 1 | | | |
 | Plate 2 x 8  | Light Bluish Gray
| 1 | | | |
![Image of part Equipment Camera with Side Sight [aka Space Gun]](https://cdn.rebrickable.com/media/parts/elements/436026.jpg) | Equipment Camera with Side Sight [aka Space Gun]  | Black
| 1 | | | |
 | Brick 1 x 4  | Dark Bluish Gray
| 1 | | | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced  | Yellow
| 7 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 7 | | | |
 | Lever Small Base with Black Lever  | Red
| 7 | | | |
 | Brick Curved 6 x 1 Inverted  | Black
| 2 | | | |
 | Brick 2 x 2  | Dark Bluish Gray
| 2 | | | |
 | Brick 2 x 2  | Black
| 2 | | | |
 | Plate 2 x 6  | Yellow
| 2 | | | |
 | Tile 1 x 1 with Groove  | Dark Bluish Gray
| 2 | | | |
 | Plate 2 x 6  | Dark Bluish Gray
| 2 | | | |
 | Brick Special 1 x 1 with Headlight  | Tan
| 2 | | | |
 | Wedge Plate 4 x 4 with 2 x 2 Cutout  | Yellow
| 2 | | | |
 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar  | Yellow
| 2 | | | |
 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth  | Dark Bluish Gray
| 2 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Black
| 2 | | | |
 | Slope Curved 2 x 2 with Lip, No Studs  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle and Pin Connector Perpendicular Double  | Black
| 2 | | | |
 | Plate 1 x 6  | Black
| 2 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Yellow
| 2 | | | |
 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar  | Yellow
| 2 | | | |
 | Brick 2 x 3  | Yellow
| 2 | | | |
 | Wedge 3 x 2 Left  | Black
| 2 | | | |
 | Plate 1 x 6  | Dark Bluish Gray
| 2 | | | |
 | Wedge 3 x 2 Right  | Black
| 2 | | | |
 | Technic Pin Double with Axle Hole  | Black
| 1 | | | |
 | Technic Beam 1 x 2 Thick  | Black
| 1 | | | |
 | Technic Pin Double with Axle Hole  | Black
| 1 | | | |
![Image of part Wedge 3 x 4 [Stud Notches]](https://cdn.rebrickable.com/media/parts/elements/4285771.jpg) | Wedge 3 x 4 [Stud Notches]  | Light Bluish Gray
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/458924.jpg) | Cone 1 x 1 [No Top Groove]  | Yellow
| 1 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Yellow
| 1 | | | |
 | Plate 2 x 10  | Black
| 1 | | | |
 | Wedge Curved Inverted 6 x 2 Right  | Yellow
| 1 | | | |
 | Plate 4 x 4  | Dark Bluish Gray
| 1 | | | |
 | Brick 2 x 3  | Black
| 1 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]](https://cdn.rebrickable.com/media/parts/elements/4260885.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]  | Dark Bluish Gray
| 1 | | | |
 | Slope 45° 10 x 2 x 2 Double  | Yellow
| 1 | | | |
 | Plate 4 x 6  | Dark Bluish Gray
| 1 | | | |
 | Brick 2 x 4  | Black
| 1 | | | |
 | Wedge Plate 3 x 2 Left  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 3 x 2 Left  | Yellow
| 1 | | | |
 | Wedge Curved 16 x 4 Triple with Inner Ridges  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 4  | Light Bluish Gray
| 1 | | | |
 | Plate 4 x 4  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 2 x 4 with Pins  | Light Bluish Gray
| 2 | | | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End  | Black
| 4 | | | |
 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction  | Black
| 4 | | | |
 | Wedge Plate 4 x 6  | Black
| 4 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Black
| 2 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Black
| 2 | | | |
 | Plate 2 x 3  | Red
| 2 | | | |
 | Plate 1 x 3  | Light Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 2  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 3 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366024.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Yellow
| 4 | | | |
 | Brick 2 x 2 Corner  | Dark Bluish Gray
| 2 | | | |
 | Plate 2 x 2  | Black
| 3 | | | |
 | Technic Pin 1/2  | Light Bluish Gray
| 4 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Yellow
| 6 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 2 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder  | Yellow
| 2 | | | |
 | Plate 2 x 2  | Red
| 3 | | | |
 | Plate 1 x 4  | Red
| 2 | | | |
 | Plate 2 x 3  | Yellow
| 3 | | | |
 | Brick 1 x 1  | Yellow
| 4 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 6 | | | |
 | Brick 2 x 2 Corner  | Dark Bluish Gray
| 2 | | | |
 | Wedge Plate 3 x 3 Cut Corner  | Black
| 4 | | | |
 | Plate 2 x 3  | Black
| 2 | | | |
 | Brick 1 x 1  | Blue
| 4 | | | |
 | Brick Special 1 x 1 with Headlight  | Red
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Yellow
| 3 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408124.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Yellow
| 2 | | | |
 | Hinge Brick 1 x 2 Base  | Black
| 1 | | | |
 | Tile 1 x 4 with Groove  | Dark Bluish Gray
| 1 | | | |
 | Knitted Cap  | Black
| 1 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation  | Red
| 1 | | | |
 | Hinge 1 x 2 Locking with 2 Fingers and Towball Socket, 9 Teeth  | Yellow
| 1 | | | |
 | Plate 2 x 8  | Black
| 1 | | | |
 | Antenna 8H Whip  | Black
| 1 | | | |
 | Tail Shuttle - Small  | Dark Bluish Gray
| 1 | | | |
 | Wedge 4 x 2 Left  | Dark Bluish Gray
| 1 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Yellow
| 1 | | | |
 | Brick 2 x 4  | White
| 1 | | | |
 | Wedge 4 x 2 Right  | Dark Bluish Gray
| 1 | | | |
 | Wedge Plate 3 x 2 Right  | Light Bluish Gray
| 1 | | | |
 | Tile 2 x 2 with Groove  | Dark Bluish Gray
| 1 | | | |
 | Antenna 8H Whip  | Black
| 1 | | | |
 | Plate 2 x 8  | Black
| 1 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Black
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 11 | | | |
 | Brick 2 x 4  | Yellow
| 1 | | | |
![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/617926.jpg) | Plate Special 4 x 4 with Studs on One Edge [Plain]  | Black
| 1 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://cdn.rebrickable.com/media/parts/elements/244424.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]  | Yellow
| 1 | | | |
 | Plate 4 x 4  | Black
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618849.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Neon Green
| 1 | | | |
 | Plate 2 x 6  | White
| 1 | | | |
 | Brick 2 x 4  | Yellow
| 1 | | | |
 | Technic Beam 1 x 3 Thin  | Black
| 1 | | | |
 | Technic Axle Connector with Axle Hole  | Yellow
| 2 | | | |
 | Plate 1 x 6  | Yellow
| 2 | | | |
 | Plate 2 x 2 Corner  | Black
| 2 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Dark Bluish Gray
| 2 | | | |
![Image of part Brick Special 1 x 2 with Vertical Clip [Thick U Clip]](https://cdn.rebrickable.com/media/parts/ldraw/14/30237.png) | Brick Special 1 x 2 with Vertical Clip [Thick U Clip]  | Yellow
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4214760.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Yellow
| 2 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 2 | | | |
 | Brick Special 1 x 1 with Handle  | Black
| 2 | | | |
 | Brick 1 x 1  | Dark Bluish Gray
| 2 | | | |
 | Flag 2 x 2 Trapezoid with Flat Area between Clips  | Black
| 2 | | | |
 | Plate 2 x 2 Corner  | Black
| 2 | | | |
 | Wedge Curved 4 x 4 No Top Studs  | Dark Blue
| 2 | | | |
 | Plate 1 x 2  | Light Bluish Gray
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2  | Light Bluish Gray
| 2 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4211570.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Light Bluish Gray
| 2 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | White
| 5 | | | |
 | Technic Pin 1/2  | Blue
| 5 | | | |
 | Slope 33° 3 x 1  | Yellow
| 2 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Light Bluish Gray
| 2 | | | |
 | Brick 1 x 3  | Yellow
| 2 | | | |
 | Plate 2 x 4  | Yellow
| 2 | | | |
 | Brick Special 1 x 1 with Handle  | Black
| 2 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 8  | Red
| 1 | | | |
 | Seat / Chair 2 x 2  | Blue
| 1 | | | |
 | Plate 2 x 10  | Blue
| 1 | | | |
 | Slope 45° 2 x 2 with Radar and Disk Slot Print  | White
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 3 x 2 Right  | Yellow
| 1 | | | |
 | Plate 4 x 4  | Yellow
| 1 | | | |
 | Seat / Chair 2 x 2  | Blue
| 1 | | | |
 | Plate 1 x 8  | Yellow
| 1 | | | |
 | Plate Special 2 x 2 with Grills  | Light Bluish Gray
| 1 | | | |
 | Lever Small Base with Black Lever  | White
| 3 | | | |
 | Hinge Plate 1 x 4 Locking Dual 1 Finger  | Light Bluish Gray
| 3 | | | |
 | Bar 1L with Clip  | Dark Bluish Gray
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 3 | | | |
 | Plate 1 x 2  | Trans-Red
| 3 | | | |
 | Technic Axle 4  | Black
| 3 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278273.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Light Bluish Gray
| 3 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Bluish Gray
| 3 | | | |
 | Plate 1 x 2  | Yellow
| 3 | | | |
 | Technic Bush  | Light Bluish Gray
| 3 | | | |
 | Technic Beam 1 x 2 Thick  | Yellow
| 1 | | | |
 | Brick 1 x 4  | Yellow
| 1 | | | |
![Image of part Technic Axle Connector Double Flexible [Rubber]](https://cdn.rebrickable.com/media/parts/elements/4198367.jpg) | Technic Axle Connector Double Flexible [Rubber]  | Black
| 1 | | | |
 | Wedge Curved Inverted 10 x 6 x 2 Cockpit  | Black
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth  | Black
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [No Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4500458.jpg) | Slope Inverted 33° 3 x 2 [No Connections between Studs]  | Black
| 1 | | | |
 | Tile 1 x 4 with Groove  | Yellow
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/374726.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Black
| 1 | | | |
 | Plate 2 x 4  | White
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | White
| 1 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Black
| 1 | | | |
 | Tile 1 x 4 with Groove  | Yellow
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [No Connections between Studs]](https://cdn.rebrickable.com/media/parts/ldraw/14/3747a.png) | Slope Inverted 33° 3 x 2 [No Connections between Studs]  | Yellow
| 2 | | | |
 | Propeller 3 Blade 3 Diameter with Axle Cross  | Black
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 2 | | | |
 | Wedge Plate 4 x 2 Left  | Black
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Black
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408121.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Red
| 2 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 4 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Dark Bluish Gray
| 2 | | | |
 | Turntable 2 x 2 Plate - Top  | Light Bluish Gray
| 2 | | | |
 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes  | Yellow
| 2 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Yellow
| 2 | | | |
 | Slope 45° 2 x 2  | Yellow
| 4 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Red
| 2 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Light Blue
| 2 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211541.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Light Bluish Gray
| 2 | | | |
 | Bar 1L with Clip  | Black
| 2 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Yellow
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 4 | | | |
 | Propeller 3 Blade 3 Diameter with Axle Cross  | Black
| 2 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Clear
| 2 | | | |
 | Propeller 3 Blade 3 Diameter with Axle Cross  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2  | Dark Bluish Gray
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 2 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 2 Notched  | Red
| 4 | | | |
 | Technic Axle and Pin Connector Angled #1  | Dark Bluish Gray
| 2 | | | |
![Image of part Treasure Chest Lid [Thick Hinge]](https://cdn.rebrickable.com/media/parts/elements/4211163.jpg) | Treasure Chest Lid [Thick Hinge]  | Reddish Brown
| 1 | | | |
 | Treasure Chest Bottom with Rear Slots, with Groove  | Reddish Brown
| 1 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Green
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618848.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Green
| 1 | | | |
 | Plate Special 4 x 6 with Studs on 3 Edges  | Black
| 1 | | | |
 | Tile 2 x 2 with Groove  | Blue
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618848.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Green
| 1 | | | |
 | Wedge Plate 6 x 3 Right  | Dark Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Groove  | Dark Bluish Gray
| 1 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Green
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | White
| 1 | | | |
 | Brick 2 x 2  | Light Bluish Gray
| 1 | | | |
 | Equipment Binoculars  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Dark Bluish Gray
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618848.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Green
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Bluish Gray
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Bluish Gray
| 1 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Dark Blue
| 1 | | | |
 | Tile 1 x 2 with Groove  | Black
| 1 | | | |
 | Plate 2 x 6  | Yellow
| 1 | | | |
 | Bracket 2 x 2 - 2 x 2  | Light Bluish Gray
| 1 | | | |
 | Slope 45° 2 x 4  | Yellow
| 1 | | | |
 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar  | Yellow
| 1 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Yellow
| 1 | | | |
 | Tile 1 x 2 with Red 82, Yellow and White Gauges Print  | Light Bluish Gray
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211436.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2  | Yellow
| 1 | | | |
 | Wedge Plate 6 x 3 Left  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Yellow
| 1 | | | |
 | Brick 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Red 82, Yellow and White Gauges Print  | Light Bluish Gray
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 7 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/0/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | Black
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | Black
| 1 | | | |
 | Bar 1L with Clip  | Dark Bluish Gray
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Yellow
| 2 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 2 | | | |
 | Wedge Plate 3 x 2 Left  | Black
| 1 | | | |
 | Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings  | Black
| 2 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Dark Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Clear
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 2 | | | |
 | Brick Special 1 x 2 with Pin  | Yellow
| 1 | | | |
 | Plate 1 x 1  | Red
| 2 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/243624.jpg) | Bracket 1 x 2 - 1 x 4 [Square Corners]  | Yellow
| 1 | | | |
 | Brick 1 x 2  | Black
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 2 (X Opening)  | Black
| 2 | | | |
 | Brick Curved 2 x 3  | Yellow
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408123.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Blue
| 1 | | | |
 | Slope Inverted 45° 2 x 1  | Yellow
| 2 | | | |
 | Hinge Brick 1 x 2 Locking with 1 Finger Horizontal End  | Black
| 2 | | | |
![Image of part Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]](https://cdn.rebrickable.com/media/parts/elements/4144024.jpg) | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]  | Black
| 2 | | | |
 | Turntable 2 x 2 Plate, Base  | Red
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Yellow
| 3 | | | |
 | Engine / Air Scoop 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder  | Yellow
| 1 | | | |
 | Plate 2 x 3  | Black
| 1 | | | |
 | Plate 1 x 4  | Red
| 1 | | | |
 | Technic Axle and Pin Connector Angled #2 - 180°  | Black
| 1 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 3 | | | |
 | Wedge Plate 3 x 2 Right  | Black
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Clear
| 2 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Dark Bluish Gray
| 2 | | | |
 | Wedge Plate 8 x 3, 22° Right  | Light Bluish Gray
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 2  | Yellow
| 2 | | | |
 | Lever Small Base with Black Lever  | Yellow
| 3 | | | |
 | Wedge Plate 3 x 2 Left  | Black
| 1 | | | |
 | Tile 1 x 2 with Groove  | Yellow
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Black
| 2 | | | |
 | Plate 1 x 1  | Red
| 2 | | | |
 | Brick 2 x 2  | White
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4222017.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | White
| 2 | | | |
 | Wedge Plate 8 x 3, 22° Left  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 4  | Red
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278412.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Clear
| 2 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 2 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Neon Green
| 1 | | | |
 | Wedge Plate 3 x 2 Left  | Black
| 1 | | | |
 | Brick 1 x 2  | Yellow
| 2 | | | |
 | Brick Special 1 x 2 with 2 Pins, Round Pin Holes  | Dark Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Trans-Red
| 2 | | | |
 | Wedge 3 x 3 Cut Corner  | Black
| 2 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Black
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4211632.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Light Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Red
| 3 | | | |
 | Plate 2 x 4  | Red
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254024.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Yellow
| 2 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Dark Bluish Gray
| 2 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 3 | | | |
 | Wedge Plate 3 x 2 Right  | Black
| 1 | | | |
 | Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 9 Teeth  | Black
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Bluish Gray
| 1 | | | |
 | Flag 2 x 2 Trapezoid with Flat Area between Clips  | Black
| 1 | | | |
 | Plate 2 x 4  | Yellow
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
![Image of part Bar 1 x 6 [Closed Studs]](https://cdn.rebrickable.com/media/parts/elements/4211524.jpg) | Bar 1 x 6 [Closed Studs]  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 2  | Red
| 1 | | | |
 | Plate 1 x 4  | Black
| 1 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://cdn.rebrickable.com/media/parts/elements/244421.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]  | Red
| 1 | | | |
 | Hook with Towball  | Dark Bluish Gray
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Light Bluish Gray
| 1 | | | |
 | Plate 1 x 1  | Light Bluish Gray
| 1 | | | |
 | Tool Jackhammer / Motor Hammer  | Dark Bluish Gray
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Plate 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle 7  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 4  | Yellow
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 5 | | | |
 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket  | Dark Bluish Gray
| 1 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Dark Pink
| 1 | | | |
 | Flag 2 x 2 Trapezoid with Flat Area between Clips  | Black
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2  | Black
| 1 | | | |
 | Plate 2 x 3  | Dark Bluish Gray
| 1 | | | |
 | Tool Jackhammer / Motor Hammer  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Light Bluish Gray
| 1 | | | |
 | Headwear Accessory Visor / Diver's Mask  | Trans-Light Blue
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Light Bluish Gray
| 1 | | | |
 | Technic Brick Special 2 x 2 with Pin Hole, with 2 Rotation Joint Sockets  | Black
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 2 | | | |
 | Mudguard 2 x 4 with Molded Headlights  | Dark Red
| 1 | | | |
 | Plate 2 x 2  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Yellow
| 2 | | | |
 | Technic Axle 2 Notched  | Red
| 2 | | | |
 | Propeller 3 Blade 3 Diameter with Axle Cross  | Black
| 1 | | | |
 | Brick Special 1 x 2 with Handle  | Black
| 2 | | | |
 | Plate 2 x 2  | Red
| 1 | | | |
 | Brick Special 2 x 2 with Pin and Axle Hole  | Yellow
| 2 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 2 | | | |
 | Handlebars  | Black
| 1 | | | |
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg) | Technic Axle 5.5 with Stop [Rounded Short End]  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle and Pin Connector Angled #1  | Yellow
| 1 | | | |
 | Handlebars  | Black
| 1 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 2 | | | |
 | Wedge Plate 3 x 4 with Stud Notches  | Blue
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211111.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle Towball  | Light Bluish Gray
| 2 | | | |
 | Plate 2 x 2  | White
| 1 | | | |
 | Wedge Plate 6 x 3 Right  | Black
| 1 | | | |
 | Wedge Plate 6 x 3 Left  | Black
| 1 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Light Blue
| 1 | | | |
 | Tool Hammer / Mallet Large  | Black
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 2 | | | |
 | Handlebars  | Black
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 1  | Yellow
| 2 | | | |
 | Plate 2 x 2  | Red
| 1 | | | |
![Image of part Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]](https://cdn.rebrickable.com/media/parts/elements/4227395.jpg) | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]  | Dark Bluish Gray
| 1 | | | |
 | Handlebars  | Black
| 1 | | | |
 | Plate 2 x 2  | Black
| 1 | | | |
 | Tool Hammer / Mallet Large  | Black
| 1 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]](https://cdn.rebrickable.com/media/parts/ldraw/15/32064d.png) | Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]  | White
| 2 | | | |
 | Rock 1 x 1 Jewel / Gem 24 Facet  | Trans-Light Blue
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Red
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254024.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Yellow
| 1 | | | |
 | Wedge Plate 3 x 4 with Stud Notches  | Black
| 1 | | | |
 | Plate 1 x 2  | Yellow
| 1 | | | |
 | Technic Axle 5  | Light Bluish Gray
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366024.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Yellow
| 1 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 1 | | | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg) | Equipment Cup / Mug [Plain]  | Red
| 1 | | | |
 | Plate 1 x 2  | Yellow
| 1 | | | |
 | Plate 2 x 2  | Yellow
| 1 | | | |
 | Plate 1 x 2  | Red
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove  | Black
| 1 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Dark Blue
| 1 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Yellow
| 1 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Blue
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Yellow
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | White
| 1 | | | |
 | Wedge Plate 4 x 6 Cut Corners  | Black
| 1 | | | |
 | Brick Special 1 x 2 with Handle  | Dark Bluish Gray
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Red
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Yellow
| 1 | | | |
 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction  | Black
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 1 | | | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg) | Equipment Cup / Mug [Plain]  | Red
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370021.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Red
| 1 | | | |
 | Brick Special 2 x 2 with Pin and Axle Hole  | Dark Bluish Gray
| 1 | | | |
 | Brick Special 1 x 2 with Pin  | Red
| 1 | | | |
 | Tool Screwdriver and Spanner / Wrench  | Black
| 1 | | | |
 | Wedge Plate 2 x 4  | Yellow
| 1 | | | |
 | Technic Axle 4  | Black
| 1 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 2 | | | |
 | Slope 45° 2 x 2  | Yellow
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove  | Light Bluish Gray
| 1 | | | |
 | Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle 3  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/383926.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]  | Black
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle Towball  | Light Bluish Gray
| 1 | | | |