![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4153759.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Sand Green
| 4 | | | |
 | Helmet with Breathing Apparatus and Headlights  | Light Gray
| 1 | | | |
 | Hinge Vehicle Roof 4 x 4  | White
| 4 | | | |
 | Windscreen 1 x 4 x 1 1/3 with Bottom Hinge  | Trans-Clear
| 2 | | | |
 | Hinge Vehicle Roof Holder 1 x 4  | Black
| 5 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder 'X' Orientation with Silver and Copper Tubing Print  | Black
| 2 | | | |
 | Magnet Cylindrical  | Black
| 2 | | | |
 | Hinge Tile 1 x 4  | Light Gray
| 8 | | | |
 | Plate 1 x 1  | Trans-Neon Green
| 2 | | | |
 | Hinge Vehicle Roof 4 x 4  | Black
| 2 | | | |
 | Weapon Lightsaber Hilt without Bottom Ring  | Chrome Silver
| 2 | | | |
 | Weapon Lightsaber Hilt without Bottom Ring  | Chrome Silver
| 2 | | | |
 | Hinge Train Gate 2 x 4  | Black
| 2 | | | |
 | Rubber Band Small 13mm (Square Cross Section)  | Black
| 4 | | | |
 | Torso Space Suit, Silver and Purple Utility Gear Print (Zam), Sand Purple Arms and Hands  | Sand Purple
| 1 | | | |
 | Hinge Train Gate 2 x 4  | Tan
| 4 | | | |
 | Tile 1 x 2 with Avionics Copper, Red & Silver Print  | Black
| 2 | | | |
 | Tile Round 2 x 2 with Republic Eight-point Star Print  | White
| 1 | | | |
 | Hinge Vehicle Roof Holder 1 x 4  | Blue
| 2 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Orange
| 3 | | | |
 | Hinge Vehicle Roof 4 x 4  | Black
| 1 | | | |
 | Tile 2 x 2 with Groove  | Light Gray
| 5 | | | |
 | Hair, Smooth  | Dark Nougat
| 1 | | | |
 | Brick Special 2 x 2 x 2 with Rotation Joint Socket and Rear Pin Hole  | Black
| 2 | | | |
 | Slope 45° 2 x 2 with Left Green Inverse 1/4 Disc Print  | Trans-Brown
| 1 | | | |
 | Hips and Violet Legs  | Brown
| 1 | | | |
 | Flexible Ribbed Hose 8mm Ends 12L with Tabbed Dark Gray Ends  | Light Gray
| 1 | | | |
 | Tile 1 x 4 with Groove  | Medium Orange
| 4 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Lip End  | Yellow
| 1 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Lip End  | Yellow
| 1 | | | |
![Image of part Minifig Head Obi-Wan Kenobi, Beard with Brown Trim Beard (forked below mouth) and Eyebrows, Headset Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/photos/14/3626bpb0024-14-175ebcbf-8c15-4bd0-85e9-a81be1506ca6.jpg) | Minifig Head Obi-Wan Kenobi, Beard with Brown Trim Beard (forked below mouth) and Eyebrows, Headset Print [Blocked Open Stud]  | Yellow
| 1 | | | |
 | Brick 1 x 3  | Medium Orange
| 2 | | | |
![Image of part Slope 75° 2 x 2 x 3 [Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4143976.jpg) | Slope 75° 2 x 2 x 3 [Hollow Studs]  | White
| 3 | | | |
 | Tile 1 x 2 with Avionics Copper, Red & Silver Print  | Black
| 1 | | | |
![Image of part Minifig Head Obi-Wan Kenobi, Beard with Brown Trim Beard (forked below mouth) and Eyebrows Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/photos/14/3626bpb0249-14-a525e482-14fa-4cce-8b23-f02f2eb8ec86.jpg) | Minifig Head Obi-Wan Kenobi, Beard with Brown Trim Beard (forked below mouth) and Eyebrows Print [Blocked Open Stud]  | Yellow
| 1 | | | |
 | Plate 6 x 8  | Light Gray
| 1 | | | |
 | Brick Round Corner 2 x 2 Macaroni with Stud Notch  | White
| 6 | | | |
 | Torso Layered Shirt, Brown Belt Print, Tan Arms, Yellow Hands  | Tan
| 1 | | | |
 | Torso Layered Shirt, Brown Belt Print, Tan Arms, Yellow Hands  | Tan
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | Lime
| 3 | | | |
 | Wedge Plate 4 x 2 Left  | Lime
| 3 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Orange
| 3 | | | |
 | Plate 4 x 6  | Dark Gray
| 4 | | | |
 | Brick 2 x 2 Corner  | Dark Gray
| 8 | | | |
 | Brick Curved 6 x 1  | Trans-Brown
| 2 | | | |
 | Hinge Vehicle Roof Holder 1 x 4  | Light Gray
| 1 | | | |
 | Plate 2 x 2 Corner  | Dark Gray
| 6 | | | |
 | Hair Center Parting  | Dark Orange
| 1 | | | |
 | Hair Center Parting  | Dark Orange
| 1 | | | |
 | Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End)  | Black
| 4 | | | |
 | Plate 6 x 6  | Light Gray
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/458926.jpg) | Cone 1 x 1 [No Top Groove]  | Black
| 8 | | | |
 | Minifig Head Zam Wesell, Veil / Gray Face Print  | Yellow
| 1 | | | |
 | Brick Curved 6 x 1 with Control Panel Print  | White
| 2 | | | |
![Image of part Dish 4 x 4 Inverted [Radar] with TIE Hatch Print](https://cdn.rebrickable.com/media/parts/ldraw/8/3960ps2.png) | Dish 4 x 4 Inverted [Radar] with TIE Hatch Print  | Dark Gray
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Dark Gray
| 1 | | | |
 | Slope 45° 2 x 3  | Dark Gray
| 4 | | | |
 | Magnet Holder 2 x 3  | Blue
| 1 | | | |
 | Hips and White Legs  | Black
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Gray
| 8 | | | |
 | Brick 2 x 2 Corner  | Dark Gray
| 6 | | | |
 | Slope Inverted 45° 4 x 4 Double with 4 x 2 Recessed  | Light Gray
| 1 | | | |
 | Wedge Plate 8 x 4 Wing Right  | Dark Red
| 1 | | | |
 | Brick 1 x 2  | Light Gray
| 4 | | | |
 | Brick Round Corner 2 x 2 Macaroni with Stud Notch  | Dark Gray
| 2 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Gray
| 1 | | | |
 | Windscreen 6 x 4 x 2 Wedge Curved  | Trans-Brown
| 1 | | | |
 | Plate 4 x 12  | Black
| 4 | | | |
 | Torso Armour Stormtrooper Print, White Arms, Black Hands  | White
| 1 | | | |
 | Hinge Train Gate 2 x 4  | Yellow
| 1 | | | |
 | Wedge Plate 3 x 4 without Stud Notches  | Black
| 1 | | | |
![Image of part Minifig Head [Plain] [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/4101661.jpg) | Minifig Head [Plain] [Blocked Open Stud]  | Trans-Neon Orange
| 3 | | | |
 | Technic Driving Ring Extension, 4 Ridges  | Dark Gray
| 1 | | | |
 | Cupboard 2 x 3 x 2 with Solid Studs  | White
| 2 | | | |
 | Plate 2 x 2 Corner  | Dark Gray
| 4 | | | |
 | Technic Axle 3  | Black
| 2 | | | |
 | Plate 2 x 16  | Green
| 2 | | | |
 | Windscreen 3 x 6 x 5 Bubble with Studs on Top with Octagonal Light Gray Lines Print  | Trans-Brown
| 1 | | | |
 | Torso Flight Suit with Control Panel and Tubes Print (TIE Pilot), Black Arms and Hands  | Black
| 1 | | | |
 | Plate 1 x 4  | Dark Gray
| 7 | | | |
 | Hinge Vehicle Roof 4 x 4  | Dark Gray
| 3 | | | |
 | Brick Special 1 x 1 with Headlight  | Light Gray
| 4 | | | |
 | Brick 2 x 2  | Dark Gray
| 4 | | | |
 | Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder with Silver and Red Astromech Droid Print (R5-D4)  | White
| 1 | | | |
 | Tile Round 2 x 2 with Imperial Logo Print  | Light Gray
| 2 | | | |
 | Plate 4 x 8  | Light Gray
| 1 | | | |
![Image of part Minifig Head Anakin Skywalker, Brown Eyebrows, Slight Smile Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/photos/14/3626bpx104-14-e08b7c62-b506-4882-9771-1940baf93089.jpg) | Minifig Head Anakin Skywalker, Brown Eyebrows, Slight Smile Print [Blocked Open Stud]  | Yellow
| 1 | | | |
 | Wedge Curved 12 x 3 Right with Silver Panels, and Green and Orange Print  | Lime
| 1 | | | |
![Image of part Tile 1 x 2 with Slave I Engine Chevron Print [7153]](https://cdn.rebrickable.com/media/parts/photos/14/3069bpb009-14-12d023a8-b981-45c1-8f18-6072076bc06a.jpg) | Tile 1 x 2 with Slave I Engine Chevron Print [7153]  | Yellow
| 2 | | | |
 | Plate 2 x 3  | Light Gray
| 4 | | | |
 | Fairing 1 x 4 Side Flaring Intake with Two Pins  | Yellow
| 2 | | | |
 | Slope 45° 2 x 2 Double  | Blue
| 2 | | | |
 | Plate 1 x 2  | Light Gray
| 4 | | | |
 | Plate 2 x 6  | Dark Gray
| 5 | | | |
 | Support 2 x 2 x 10 Girder Triangular Vertical - Type 1 - Solid Top, 3 Posts  | Dark Gray
| 1 | | | |
 | Tile 1 x 2 with Stylised Computer Console Print  | Light Gray
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Blue
| 43 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Dark Blue
| 1 | | | |
 | Plate 4 x 4  | Dark Gray
| 2 | | | |
![Image of part Bar 1 x 3 [Clip / Anti-Stud]](https://cdn.rebrickable.com/media/parts/elements/4143007.jpg) | Bar 1 x 3 [Clip / Anti-Stud]  | Dark Gray
| 2 | | | |
![Image of part Technic Axle 5.5 with Stop [Flat Short End]](https://cdn.rebrickable.com/media/parts/elements/4120471.jpg) | Technic Axle 5.5 with Stop [Flat Short End]  | White
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Gray
| 1 | | | |
 | Plate 2 x 4  | Dark Gray
| 6 | | | |
 | Tile Round 2 x 2 with Bottom Cross  | Light Gray
| 2 | | | |
 | Wedge Plate 6 x 12 Right  | Dark Red
| 1 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]](https://cdn.rebrickable.com/media/parts/elements/4140812.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]  | Light Gray
| 1 | | | |
 | Wedge Plate 3 x 3 Cut Corner  | Light Gray
| 2 | | | |
 | Wedge Curved 12 x 3 Left with Silver Panels, and Green, Orange Print  | Lime
| 1 | | | |
 | Magnet Holder Tile 2 x 2 - Tall Arms with Deep Notch  | Black
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Gray
| 4 | | | |
 | Tile 1 x 4 with Groove  | Dark Gray
| 2 | | | |
 | Brick 1 x 4  | Light Gray
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Light Gray
| 2 | | | |
 | Plate 1 x 10  | Light Gray
| 4 | | | |
 | Plate 1 x 2  | Light Gray
| 3 | | | |
 | Tile 1 x 2 with Joystick and Vehicle Control Panel Print  | Dark Gray
| 1 | | | |
 | Slope 65° 2 x 2 x 2 Smooth without Bottom Tube  | White
| 2 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Dark Blue
| 1 | | | |
 | Plate Special 2 x 2 with Grills  | Dark Gray
| 2 | | | |
 | Plate 1 x 6  | Light Gray
| 4 | | | |
 | Slope 45° 2 x 4 with Red and Gold Triangles Right Print  | White
| 1 | | | |
 | Weapon Gun / Flintlock / Musket (Pirate)  | Black
| 1 | | | |
 | Weapon Gun / Pistol / Revolver Large Barrel, Long Grip  | Dark Gray
| 2 | | | |
 | Brick 1 x 2  | Light Gray
| 2 | | | |
 | Brick Arch 1 x 6  | Light Gray
| 2 | | | |
 | Plate 1 x 4  | Dark Gray
| 4 | | | |
 | Wedge Plate 6 x 12 Left  | Light Gray
| 1 | | | |
 | Wedge Plate 6 x 12 Right  | Light Gray
| 1 | | | |
 | Plate 2 x 4  | Dark Gray
| 4 | | | |
 | Technic Axle 3  | Black
| 1 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Green
| 1 | | | |
 | Slope Inverted 75° 2 x 1 x 3  | Yellow
| 2 | | | |
 | Brick Arch 1 x 6  | Black
| 2 | | | |
 | Plate 2 x 4  | Medium Orange
| 1 | | | |
 | Technic Axle and Pin Connector Angled #1  | Tan
| 2 | | | |
 | Plate 2 x 3  | Light Gray
| 2 | | | |
 | Plate 2 x 3  | Light Gray
| 2 | | | |
 | Slope 18° 4 x 2  | Dark Gray
| 2 | | | |
 | Plate 4 x 10  | White
| 1 | | | |
 | Brick Special 1 x 2 with Grille  | Light Gray
| 2 | | | |
 | Tile 1 x 8 with Groove  | Dark Gray
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Gray
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Gray
| 2 | | | |
 | Tile 1 x 2 with Stylised Computer Console Print  | Light Gray
| 1 | | | |
 | Plate 4 x 6  | Dark Gray
| 1 | | | |
![Image of part Minifig Head [Plain] [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/4101689.jpg) | Minifig Head [Plain] [Blocked Open Stud]  | Brown
| 1 | | | |
 | Plate 4 x 6  | Dark Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Ridges](https://cdn.rebrickable.com/media/parts/ldraw/4/32064a.png) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Ridges  | Red
| 2 | | | |
 | Brick Special 2 x 2 with Pin and Axle Hole  | Lime
| 2 | | | |
 | Brick 2 x 2 Corner  | Dark Gray
| 2 | | | |
 | Plate 6 x 10  | Dark Gray
| 1 | | | |
 | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed  | Light Gray
| 1 | | | |
 | Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed  | Light Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]](https://cdn.rebrickable.com/media/parts/ldraw/7/4623.png) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]  | Light Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]](https://cdn.rebrickable.com/media/parts/ldraw/7/4623.png) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]  | Light Gray
| 2 | | | |
 | Wedge Plate 6 x 12 Right  | Black
| 4 | | | |
 | Tile Round 2 x 2 with Bottom Cross  | Light Gray
| 1 | | | |
 | Plate 1 x 3  | Dark Gray
| 4 | | | |
 | Wedge Plate 8 x 4 Wing Left  | Dark Red
| 1 | | | |
 | Hips and Tan Legs  | Tan
| 1 | | | |
 | Hips and Tan Legs  | Tan
| 1 | | | |
 | Wedge Plate 6 x 12 Left  | Black
| 4 | | | |
 | Slope 45° 2 x 4 with Red and Gold Triangles Left Print  | White
| 1 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/618844.jpg) | Cone 1 x 1 [No Top Groove]  | Trans-Yellow
| 2 | | | |
![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4143013.jpg) | Dish 4 x 4 Inverted [Radar]  | Light Gray
| 1 | | | |
 | Brick 2 x 3  | Light Gray
| 2 | | | |
 | Hinge Brick 1 x 2 Base  | Dark Gray
| 1 | | | |
 | Wedge Curved 8 x 3 x 2 Open Right  | Sand Green
| 1 | | | |
 | Plate 2 x 4  | Blue
| 10 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389402.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | Light Gray
| 2 | | | |
 | Brick 1 x 8  | White
| 2 | | | |
 | Slope 45° 2 x 1 Double / Inverted with Hollow Bottom  | White
| 1 | | | |
 | Plate 2 x 3  | Dark Orange
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408102.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Light Gray
| 2 | | | |
 | Brick 1 x 3  | Dark Gray
| 2 | | | |
![Image of part Cone 4 x 4 x 2, Axle Hole [Plain]](https://cdn.rebrickable.com/media/parts/elements/4125548.jpg) | Cone 4 x 4 x 2, Axle Hole [Plain]  | Dark Gray
| 2 | | | |
 | Brick 1 x 10  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 10 [9 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/273001.jpg) | Technic Brick 1 x 10 [9 Pin Holes]  | White
| 2 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4166527.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Lime
| 2 | | | |
 | Hair, Smooth  | Black
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Cross  | Black
| 1 | | | |
 | Large Figure Foot, Wedge 3 x 7 x 3  | Tan
| 2 | | | |
 | Wedge Curved 8 x 3 x 2 Open Right  | Black
| 2 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]](https://cdn.rebrickable.com/media/parts/ldraw/7/2444.png) | Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]  | Light Gray
| 2 | | | |
 | Plate 2 x 12  | Red
| 2 | | | |
 | Plate 4 x 12  | Black
| 1 | | | |
 | Brick 1 x 4  | White
| 4 | | | |
 | Slope 33° 3 x 1  | Dark Gray
| 2 | | | |
 | Brick Special 2 x 4 with Pins  | Dark Gray
| 2 | | | |
 | Plate 1 x 4  | Dark Gray
| 2 | | | |
 | Brick 2 x 6  | Light Gray
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4164004.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Neon Orange
| 7 | | | |
 | Wedge Curved 8 x 3 x 2 Open Left  | Black
| 2 | | | |
 | Slope Inverted 75° 2 x 1 x 3  | White
| 2 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Light Gray
| 2 | | | |
 | Plate 2 x 4  | Dark Gray
| 2 | | | |
 | Plate 1 x 2  | Dark Gray
| 1 | | | |
 | Slope 45° 2 x 2 with Right Green Inverse 1/4 Disc Print  | Trans-Brown
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On Top  | Dark Gray
| 5 | | | |
 | Plate 2 x 4  | Light Gray
| 1 | | | |
![Image of part Flag 2 x 2 Square [Thin Clips]](https://cdn.rebrickable.com/media/parts/elements/4162384.jpg) | Flag 2 x 2 Square [Thin Clips]  | Red
| 2 | | | |
 | Slope 45° 2 x 2  | Light Gray
| 2 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Green
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Yellow
| 9 | | | |
 | Brick 1 x 2  | White
| 6 | | | |
 | Wedge Plate 4 x 9 without Stud Notches  | Dark Gray
| 1 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370126.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Black
| 3 | | | |
 | Bracket 2 x 2 - 2 x 2  | Black
| 4 | | | |
 | Plate 1 x 10  | Blue
| 4 | | | |
 | Plate 1 x 6  | Black
| 5 | | | |
 | Wedge Curved 8 x 3 x 2 Open Left  | Sand Green
| 1 | | | |
 | Hair Center Parting  | Black
| 1 | | | |
 | Wedge Curved Inverted 6 x 2 Left  | Yellow
| 2 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Light Gray
| 2 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Light Gray
| 2 | | | |
 | Plate 1 x 2  | Tan
| 8 | | | |
![Image of part Cone 1 x 1 [No Top Groove]](https://cdn.rebrickable.com/media/parts/elements/458921.jpg) | Cone 1 x 1 [No Top Groove]  | Red
| 2 | | | |
 | Brick Curved 6 x 1  | Dark Gray
| 2 | | | |
 | Wheel 18 x 14 with Tread Small Hub  | Light Gray
| 2 | | | |
 | Brick 1 x 6  | Green
| 2 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4112930.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin  | Blue
| 2 | | | |
 | Brick Arch 1 x 5 x 4 Inverted  | Black
| 4 | | | |
 | Brick Special 2 x 2 with 2 Pins and Axle Hole  | Dark Gray
| 4 | | | |
 | Brick Special 1 x 2 with Pin  | Yellow
| 5 | | | |
 | Brick 2 x 8  | Blue
| 1 | | | |
 | Legs Short  | Medium Blue
| 1 | | | |
 | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End, 9 Teeth  | Black
| 2 | | | |
 | Wedge Curved Inverted 6 x 2 Right  | Yellow
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 9 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Gray
| 1 | | | |
 | Plate 4 x 8  | Black
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth  | Black
| 3 | | | |
 | Tile 1 x 4 with Groove  | Yellow
| 3 | | | |
 | Plate 1 x 8  | Black
| 2 | | | |
 | Plate 1 x 3  | Light Gray
| 1 | | | |
 | Brick Special 1 x 2 with Pin  | Dark Gray
| 2 | | | |
 | Plate 1 x 4  | Black
| 5 | | | |
![Image of part Technic Brick 1 x 6 [5 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/389402.jpg) | Technic Brick 1 x 6 [5 Pin Holes]  | Light Gray
| 1 | | | |
 | Brick Special 1 x 2 with Grille  | White
| 4 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 8 | | | |
 | Brick 1 x 2  | Tan
| 4 | | | |
 | Plate Special 1 x 2 with Door Rail  | Green
| 6 | | | |
 | Tile 1 x 8 with Groove  | White
| 2 | | | |
 | Brick 1 x 4  | Black
| 2 | | | |
![Image of part Minifig Head [Plain] [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/ldraw/14/3626b.png) | Minifig Head [Plain] [Blocked Open Stud]  | Yellow
| 1 | | | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/383902.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]  | Light Gray
| 1 | | | |
 | Plate 1 x 8  | Green
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | Light Gray
| 2 | | | |
 | Equipment Space Binoculars / Scanner / Electrobinoculars  | Dark Gray
| 1 | | | |
 | Brick 2 x 8  | Yellow
| 1 | | | |
 | Technic Pin 1/2  | Light Gray
| 2 | | | |
 | Slope 45° 2 x 2 Double Concave  | Dark Gray
| 2 | | | |
 | Slope Curved 2 x 2 with Lip, No Studs  | Yellow
| 2 | | | |
 | Brick Special 1 x 1 with Headlight  | Black
| 2 | | | |
 | Tile 1 x 6 with Groove  | Lime
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Tan
| 4 | | | |
 | Slope 33° 3 x 2  | Dark Blue
| 4 | | | |
 | Tile 1 x 1 with Groove  | White
| 4 | | | |
 | Slope 33° 3 x 2  | White
| 2 | | | |
 | Plate 1 x 3  | Black
| 2 | | | |
 | Slope 33° 3 x 2  | Green
| 2 | | | |
 | Plate 2 x 2  | Dark Gray
| 1 | | | |
 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth  | Light Gray
| 2 | | | |
 | Slope 45° 2 x 4  | White
| 2 | | | |
 | Tile 1 x 4 with Groove  | Red
| 2 | | | |
![Image of part Slope Inverted 33° 3 x 2 [No Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4500458.jpg) | Slope Inverted 33° 3 x 2 [No Connections between Studs]  | Black
| 2 | | | |
 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth  | Light Gray
| 2 | | | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/4168018.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]  | Dark Gray
| 1 | | | |
 | Slope 45° 2 x 2  | Dark Blue
| 4 | | | |
 | Tile 1 x 2 with Groove  | White
| 4 | | | |
 | Wedge Plate 3 x 6 Cut Corners  | Blue
| 4 | | | |
 | Tile 1 x 4 with Groove  | Lime
| 4 | | | |
 | Wedge 4 x 2 Right  | Lime
| 1 | | | |
 | Plate Round Corner 6 x 6  | Tan
| 2 | | | |
 | Slope 33° 3 x 1  | Sand Green
| 2 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366026.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Black
| 2 | | | |
 | Brick Curved 6 x 1 Inverted  | Lime
| 2 | | | |
 | Plate Special 4 x 6 with Studs on 3 Edges  | Black
| 2 | | | |
 | Plate 2 x 6  | Green
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 5 | | | |
 | Tile 1 x 8 with Groove  | Black
| 1 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | White
| 1 | | | |
 | Plate 2 x 6  | Tan
| 2 | | | |
 | Brick 2 x 3  | Yellow
| 2 | | | |
 | Brick 1 x 3  | Red
| 2 | | | |
 | Slope 33° 3 x 1  | White
| 2 | | | |
 | Brick Curved 6 x 1 Inverted  | Black
| 2 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Black
| 1 | | | |
 | Brick Special 1 x 2 with Handle  | Lime
| 1 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | Yellow
| 1 | | | |
 | Brick 2 x 6  | Yellow
| 1 | | | |
 | Brick 2 x 3  | Black
| 1 | | | |
 | Plate 2 x 2  | White
| 3 | | | |
 | Technic Axle 6  | Black
| 2 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Red
| 2 | | | |
 | Plate 1 x 3  | White
| 2 | | | |
 | Brick 1 x 3  | Blue
| 2 | | | |
 | Brick 2 x 2  | Blue
| 2 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Light Blue
| 2 | | | |
 | Plate 1 x 2  | Yellow
| 4 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Trans-Neon Orange
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Lime
| 6 | | | |
 | Slope Inverted 45° 2 x 1  | Green
| 4 | | | |
 | Brick 2 x 4  | Red
| 1 | | | |
 | Plate 2 x 8  | Black
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Light Gray
| 1 | | | |
 | Wedge Curved 6 x 2 Left, Inner Ridges  | Yellow
| 1 | | | |
![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/617926.jpg) | Plate Special 4 x 4 with Studs on One Edge [Plain]  | Black
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Light Gray
| 1 | | | |
![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/617926.jpg) | Plate Special 4 x 4 with Studs on One Edge [Plain]  | Black
| 1 | | | |
 | Tile 2 x 2 with Groove  | Black
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends  | Light Gray
| 1 | | | |
![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/617926.jpg) | Plate Special 4 x 4 with Studs on One Edge [Plain]  | Black
| 1 | | | |
 | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End  | Black
| 2 | | | |
 | Brick Curved 6 x 1 Inverted  | White
| 2 | | | |
 | Brick 2 x 2  | Red
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Red
| 2 | | | |
 | Plate 2 x 4  | Blue
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 5 | | | |
 | Slope 33° 3 x 1  | Yellow
| 2 | | | |
 | Technic Pin 1/2  | Blue
| 5 | | | |
 | Plate 1 x 4  | Black
| 2 | | | |
 | Brick 1 x 4  | Blue
| 1 | | | |
 | Wedge Curved 6 x 2 Right, Inner Ridges  | White
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Green
| 1 | | | |
 | Cone 2 x 2 x 2, Open Stud  | Dark Gray
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4140561.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Tan
| 3 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Gray
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Black
| 1 | | | |
 | Plate 2 x 4  | White
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | White
| 1 | | | |
 | Slope 33° 3 x 2  | Yellow
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366023.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Blue
| 2 | | | |
 | Plate 2 x 2 Corner  | Blue
| 2 | | | |
 | Wedge 4 x 2 Left  | Lime
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | White
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/3006343.jpg) | Dish 2 x 2 Inverted [Radar]  | Trans-Dark Blue
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Blue
| 1 | | | |
 | Tile 2 x 2 with Groove  | White
| 1 | | | |
 | Plate 2 x 4  | Green
| 1 | | | |
 | Tile 1 x 1 with Groove  | Black
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Black
| 2 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Light Blue
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 2 | | | |
 | Technic Axle 6  | Black
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Blue
| 2 | | | |
 | Plate 2 x 2  | Yellow
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Neon Orange
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 3 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]](https://cdn.rebrickable.com/media/parts/elements/4166529.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]  | Lime
| 2 | | | |
 | Brick 1 x 2  | White
| 1 | | | |
 | Brick 1 x 2  | Lime
| 2 | | | |
 | Plate 1 x 1  | Trans-Red
| 2 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/243624.jpg) | Bracket 1 x 2 - 1 x 4 [Square Corners]  | Yellow
| 1 | | | |
 | Rubber Band / Belt Holder 2 x 4 x 2 1/3  | Dark Gray
| 1 | | | |
 | Support Round 2 x 2 x 2 Stand with Reach-Through Center Hole  | Black
| 1 | | | |
 | Plate 2 x 4  | Black
| 1 | | | |
 | Brick 2 x 2  | Yellow
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/366021.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Red
| 1 | | | |
 | Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun  | Black
| 1 | | | |
 | Plate 2 x 4  | Yellow
| 1 | | | |
 | Plate 1 x 6  | Yellow
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 4 | | | |
 | Tile 1 x 1 with Groove  | Yellow
| 1 | | | |
 | Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole, 9 Teeth  | Black
| 1 | | | |
 | Plate 1 x 6  | Lime
| 1 | | | |
 | Slope Inverted 45° 2 x 1  | Lime
| 2 | | | |
 | Lever Small Base with Black Lever  | Yellow
| 2 | | | |
![Image of part Slope Inverted 33° 3 x 2 [No Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/374723.jpg) | Slope Inverted 33° 3 x 2 [No Connections between Studs]  | Blue
| 1 | | | |
 | Brick 1 x 2  | Yellow
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Black
| 1 | | | |
 | Wedge Plate 4 x 6 Cut Corners  | Black
| 1 | | | |
 | Technic Axle 2 Notched  | Red
| 1 | | | |