 | Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom  | White
| 1 | | | |
![Image of part Animal, Octopus [Plain]](https://cdn.rebrickable.com/media/parts/elements/4506995.jpg) | Animal, Octopus [Plain]  | Dark Red
| 1 | | | |
 | Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout  | Dark Bluish Gray
| 4 | | | |
 | Boat / Rubber Raft / Dinghy 6 x 10  | Orange
| 1 | | | |
 | Boat Hull 8 x 28 x 3  | Dark Red
| 1 | | | |
![Image of part Chain 16L [21 Links]](https://cdn.rebrickable.com/media/parts/elements/4516456.jpg) | Chain 16L [21 Links]  | Dark Bluish Gray
| 5 | | | |
 | Boat Deck 51 x 12 x 6  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 16  | White
| 6 | | | |
![Image of part Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6035405.jpg) | Brick Curved 10 x 1 [Symmetric Inside Ridges]  | White
| 6 | | | |
![Image of part Technic Brick 1 x 16 [15 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4256828.jpg) | Technic Brick 1 x 16 [15 Pin Holes]  | Dark Bluish Gray
| 3 | | | |
 | Plate 8 x 8  | Light Bluish Gray
| 2 | | | |
 | Plate 8 x 16  | Dark Bluish Gray
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Bluish Gray
| 43 | | | |
 | Plate 6 x 12  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 6  | Light Bluish Gray
| 8 | | | |
 | Slope 45° 2 x 2 with Complex Control Panel with Red and Green Lamps Print  | Black
| 1 | | | |
![Image of part Engine Smooth Large [2 x 2 Thin Top Plate]](https://cdn.rebrickable.com/media/parts/elements/4100559.jpg) | Engine Smooth Large [2 x 2 Thin Top Plate]  | Yellow
| 4 | | | |
 | Torso Coast Guard Wetsuit with Orange Panel and Coast Guard Logo and Zipper on Back Print, Orange Arms, Yellow Hands  | Dark Red
| 1 | | | |
 | Plate 2 x 8  | Dark Bluish Gray
| 7 | | | |
 | Slope 30° 1 x 2 x 2/3  | Light Bluish Gray
| 12 | | | |
 | Brick 2 x 8  | Black
| 3 | | | |
 | Brick 1 x 8  | Dark Bluish Gray
| 4 | | | |
 | Tile 2 x 2 with Newspaper 'THE LEGO NEWS volume 3' Print  | White
| 1 | | | |
 | Plate 4 x 8  | Dark Bluish Gray
| 4 | | | |
 | Brick 1 x 6  | Orange
| 6 | | | |
 | Slope Curved 2 x 2 x 2/3  | Light Bluish Gray
| 5 | | | |
 | Technic Axle 12  | Black
| 3 | | | |
 | Wave / Flame Rounded Large with Marbled Trans Clear Pattern  | Trans-Light Blue
| 2 | | | |
 | Torso Shirt with Sunset and Palm Trees Print, Medium Blue Arms, Yellow Hands  | Medium Blue
| 1 | | | |
 | Brick 1 x 6  | White
| 4 | | | |
 | Plate 1 x 4  | White
| 12 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Light Bluish Gray
| 12 | | | |
 | Window 2 x 8 x 2 Boat  | Orange
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove  | Dark Bluish Gray
| 4 | | | |
 | Torso Coast Guard Shirt with Buttons, Pockets, White Belt and Badge Print, Sand Blue Arms, Yellow Hands  | Sand Blue
| 1 | | | |
 | Torso Coast Guard Shirt with Buttons, Pockets, White Belt and Badge Print, Sand Blue Arms, Yellow Hands  | Sand Blue
| 1 | | | |
 | Brick 2 x 4  | Orange
| 6 | | | |
 | Torso Jacket, Open over Orange Sweater, Pockets, Coast Guard Logo Badge Print, Sand Blue Arms, Yellow Hands  | Sand Blue
| 1 | | | |
 | Torso Jacket, Open over Orange Sweater, Pockets, Coast Guard Logo Badge Print, Sand Blue Arms, Yellow Hands  | Sand Blue
| 1 | | | |
 | Animal Body Part, Shark Body with Three Gill Slits  | Dark Bluish Gray
| 1 | | | |
![Image of part Wheel Arch, Mudguard, 1 1/2 x 6 x 1 [Arch Extended]](https://cdn.rebrickable.com/media/parts/elements/4523556.jpg) | Wheel Arch, Mudguard, 1 1/2 x 6 x 1 [Arch Extended]  | White
| 2 | | | |
 | Brick 2 x 2  | Light Bluish Gray
| 8 | | | |
 | Minifig Head Paul, Blue Tinted Glasses, Brown Eyebrows, Shocked / Smile Print  | Yellow
| 1 | | | |
![Image of part Minifig Head Ferrari Engineer (Pit Crew) / Pirate, Beard Black Angular, Pupils, Teeth Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6112620.jpg) | Minifig Head Ferrari Engineer (Pit Crew) / Pirate, Beard Black Angular, Pupils, Teeth Print [Hollow Stud]  | Yellow
| 1 | | | |
 | Glass for Window 1 x 4 x 6  | Trans-Light Blue
| 4 | | | |
 | Slope 30° 1 x 2 x 2/3  | Orange
| 12 | | | |
 | Brick 1 x 4  | Orange
| 10 | | | |
 | Tile 2 x 4 with Groove  | Light Bluish Gray
| 3 | | | |
 | Slope 65° 2 x 1 x 2  | Light Bluish Gray
| 8 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4594685.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | Trans-Light Blue
| 4 | | | |
![Image of part Plate Special 8 x 8 with Grille [Hole in Center]](https://cdn.rebrickable.com/media/parts/elements/6035288.jpg) | Plate Special 8 x 8 with Grille [Hole in Center]  | Dark Tan
| 4 | | | |
 | Hips and Green Legs  | Green
| 1 | | | |
 | Door Frame 1 x 4 x 6 Type 2  | White
| 4 | | | |
 | Wedge Plate 8 x 6 x 2/3 with Grille  | Light Bluish Gray
| 1 | | | |
 | Cap, Police Style  | White
| 1 | | | |
 | Torso Jacket, Straps / Harness, Carbine, Coastal Guard Logo Print, Orange Arms, Dark Bluish Gray Hands  | Orange
| 1 | | | |
 | Brick 2 x 4  | White
| 4 | | | |
 | Plate 4 x 12  | White
| 1 | | | |
 | Slope 45° 2 x 2 with Radar Screen Print  | White
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 15 | | | |
 | Tile 1 x 6 with Groove  | White
| 5 | | | |
 | Tile 1 x 2 with Computer Keyboard Standard Print  | Dark Bluish Gray
| 1 | | | |
 | Plate 1 x 8  | White
| 4 | | | |
 | Brick 1 x 4  | White
| 4 | | | |
 | Hair Mid-Length Tousled with Center Part  | Dark Brown
| 1 | | | |
 | Plate 1 x 12  | Light Bluish Gray
| 2 | | | |
 | Windscreen 5 x 8 x 2  | Trans-Light Blue
| 1 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Red
| 4 | | | |
 | Door Frame 4 x 4 x 6 Corner  | White
| 2 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Dark Bluish Gray
| 5 | | | |
![Image of part Road Sign Clip-on 2 x 2 Square [Thick Open O Clip] with Curved Blue Lines and Small Black Squares Print](https://cdn.rebrickable.com/media/parts/elements/6064043.jpg) | Road Sign Clip-on 2 x 2 Square [Thick Open O Clip] with Curved Blue Lines and Small Black Squares Print  | Black
| 1 | | | |
 | Minifig Head, Eyebrows, Glasses with Thick Edge, Peach Lips Print  | Yellow
| 1 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Blue
| 4 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | White
| 4 | | | |
 | Tile 2 x 2 with Groove  | Dark Bluish Gray
| 3 | | | |
 | Brick 1 x 2  | White
| 6 | | | |
 | Hair Smooth Combed Sideways  | Black
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3  | White
| 7 | | | |
 | Animal Body Part, Shark Head with Rounded Nose with Black Eyes Print  | Dark Bluish Gray
| 1 | | | |
 | Minifig Head, Eyebrows, Open Mouth Smile, with Teeth  | Yellow
| 1 | | | |
![Image of part Equipment Flotation Ring [Life Preserver]](https://cdn.rebrickable.com/media/parts/elements/4527354.jpg) | Equipment Flotation Ring [Life Preserver]  | Yellow
| 5 | | | |
 | Tile 1 x 8 with Groove  | Yellow
| 2 | | | |
 | Glass for Window 2 x 8 x 2 Boat  | Trans-Light Blue
| 1 | | | |
 | Plate 4 x 10  | Black
| 1 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Light Bluish Gray
| 3 | | | |
 | Brick 2 x 6  | White
| 2 | | | |
 | Slope Curved 2 x 2 x 2/3  | Dark Bluish Gray
| 2 | | | |
 | Brick Special 1 x 2 with Grille  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 8  | Blue
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Orange
| 16 | | | |
 | Minifig Head, Thin Eyebrows, Eyelashes, White Pupils and Peach Lips Smile Print  | Yellow
| 1 | | | |
 | Glass for Window 1 x 2 x 2 Flat  | Trans-Light Blue
| 6 | | | |
 | Brick 1 x 4  | Dark Bluish Gray
| 2 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | White
| 6 | | | |
 | Plate 1 x 4  | Blue
| 7 | | | |
 | Minifig Head, Black and Silver Sunglasses, Chin Dimple, Grim Mouth Print  | Yellow
| 1 | | | |
 | Technic Beam 1 x 4 Thin  | Dark Bluish Gray
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | Yellow
| 9 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Light Bluish Gray
| 3 | | | |
 | Plate 6 x 8  | Blue
| 1 | | | |
 | Hair Short Bob Cut  | Black
| 1 | | | |
 | Window 1 x 4 x 2 Plane, Hollow Studs, Single Hole Top and Bottom for Glass  | White
| 2 | | | |
 | Plate Round Half 4 x 8  | Blue
| 1 | | | |
 | Door 1 x 4 x 6 Smooth with Chamfered Handle Plinth  | Trans-Light Blue
| 2 | | | |
 | Plate 1 x 10  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 6 with Groove  | Blue
| 2 | | | |
 | Minifig Head Joey / Chamille, Raised Eyebrow, Eyelashes, Peach Lips, Smirk Print  | Yellow
| 1 | | | |
 | Brick 1 x 1  | White
| 4 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 4 | | | |
![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6129594.jpg) | Panel 1 x 2 x 3 [Side Supports / Hollow Studs]  | Orange
| 2 | | | |
 | Brick 2 x 2  | Blue
| 4 | | | |
 | Technic Gear 12 Tooth Double Bevel  | Black
| 4 | | | |
 | Plate 1 x 10  | White
| 2 | | | |
 | Antenna 8H Whip  | Black
| 2 | | | |
 | Brick Round 2 x 2 Dome Top, Hollow Stud  | Yellow
| 4 | | | |
 | Wedge Curved 10 x 3 Left  | White
| 1 | | | |
 | Plate 4 x 6  | Black
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3 with 2 Gauges print  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 4 x 4 Centre Hole  | White
| 1 | | | |
 | Slope 75° 2 x 1 x 3 with Hollow Stud  | White
| 2 | | | |
 | Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Bottom  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 3  | Orange
| 2 | | | |
 | Hinge Plate 2 x 4 with Pin Hole - Top  | Black
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 11 | | | |
 | Brick 1 x 1  | Orange
| 7 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Light Bluish Gray
| 3 | | | |
 | Plate 1 x 2  | White
| 5 | | | |
 | Slope 45° 2 x 2 with Radar and Disk Slot Print  | White
| 2 | | | |
 | Plate 1 x 2  | Light Bluish Gray
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Dark Bluish Gray
| 4 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370001.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | White
| 4 | | | |
 | Plate Special 1 x 2 with Ladder  | Dark Bluish Gray
| 2 | | | |
 | Plate 4 x 8  | Blue
| 1 | | | |
 | Hat / Cap Short Curved Bill with Seams and Hole on Top  | Blue
| 1 | | | |
 | Tile Special 2 x 2 with Top Pin  | Light Bluish Gray
| 6 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | White
| 6 | | | |
 | Plate 2 x 3  | White
| 2 | | | |
 | Plate 1 x 6  | White
| 2 | | | |
 | Tile 2 x 4 with Groove  | Black
| 1 | | | |
 | Plate 2 x 8  | White
| 1 | | | |
 | Wedge Curved 10 x 3 Right  | White
| 1 | | | |
 | Hat / Cap Short Curved Bill with Seams and Hole on Top  | Dark Red
| 1 | | | |
![Image of part Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]](https://cdn.rebrickable.com/media/parts/elements/4211487.jpg) | Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 10  | White
| 1 | | | |
![Image of part Minifig Neckwear Life Jacket [Centre Buckle]](https://cdn.rebrickable.com/media/parts/elements/4648281.jpg) | Minifig Neckwear Life Jacket [Centre Buckle]  | Yellow
| 1 | | | |
![Image of part Minifig Neckwear Life Jacket [Centre Buckle]](https://cdn.rebrickable.com/media/parts/elements/4648281.jpg) | Minifig Neckwear Life Jacket [Centre Buckle]  | Yellow
| 1 | | | |
![Image of part Minifig Neckwear Life Jacket [Centre Buckle]](https://cdn.rebrickable.com/media/parts/elements/4648281.jpg) | Minifig Neckwear Life Jacket [Centre Buckle]  | Yellow
| 1 | | | |
![Image of part Minifig Neckwear Life Jacket [Centre Buckle]](https://cdn.rebrickable.com/media/parts/elements/4648281.jpg) | Minifig Neckwear Life Jacket [Centre Buckle]  | Yellow
| 1 | | | |
![Image of part Minifig Neckwear Life Jacket [Centre Buckle]](https://cdn.rebrickable.com/media/parts/elements/4648281.jpg) | Minifig Neckwear Life Jacket [Centre Buckle]  | Yellow
| 1 | | | |
 | Wedge Plate 4 x 6 Cut Corners  | Dark Bluish Gray
| 4 | | | |
 | Plate 1 x 2  | Trans-Yellow
| 4 | | | |
 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole  | Black
| 4 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6100030.jpg) | Technic Pin Connector Round 1L [Beam]  | Dark Bluish Gray
| 4 | | | |
![Image of part Brick Special 1 x 2 with Vertical Clip [Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6131666.jpg) | Brick Special 1 x 2 with Vertical Clip [Open O Clip]  | Orange
| 4 | | | |
 | Hinge Plate 1 x 8 Locking with Angled Side Extensions, Squared Plate Underside, 7 Teeth  | Black
| 4 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Dark Bluish Gray
| 4 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Red
| 4 | | | |
 | Tile 1 x 2 with Groove  | White
| 4 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6347287.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | White
| 4 | | | |
 | Window 1 x 4 x 3 without Shutter Tabs  | Light Bluish Gray
| 1 | | | |
 | Tile 2 x 4 with Groove  | Blue
| 1 | | | |
![Image of part Bar 7 x 3 with Double Clips (Ladder) [Straight Clips]](https://cdn.rebrickable.com/media/parts/elements/602026.jpg) | Bar 7 x 3 with Double Clips (Ladder) [Straight Clips]  | Black
| 1 | | | |
 | Technic Pin Connector Plate with One Hole (Single on Bottom)  | Black
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Yellow
| 8 | | | |
 | Plate 1 x 1  | Trans-Orange
| 5 | | | |
 | Plate 1 x 2  | Blue
| 5 | | | |
![Image of part Equipment Stretcher [No Bottom Hinges]](https://cdn.rebrickable.com/media/parts/elements/4622575.jpg) | Equipment Stretcher [No Bottom Hinges]  | White
| 1 | | | |
 | Plate Round Half 4 x 8  | White
| 1 | | | |
 | Plate 2 x 10  | Black
| 1 | | | |
 | Bar 6L with Stop Ring  | Dark Bluish Gray
| 2 | | | |
 | Window 1 x 2 x 2 Plane, Hollow Studs, Single Hole Top and Bottom for Glass  | White
| 2 | | | |
 | Boat, Mast 2 x 2 x 3 Inclined with Stud on Top and Two Sides  | White
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3  | Dark Bluish Gray
| 2 | | | |
![Image of part Support 2 x 4 x 5 Stanchion Inclined [5mm wide posts]](https://cdn.rebrickable.com/media/parts/elements/4142125.jpg) | Support 2 x 4 x 5 Stanchion Inclined [5mm wide posts]  | White
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Red
| 2 | | | |
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211787.jpg) | Dish 3 x 3 Inverted [Radar]  | Light Bluish Gray
| 1 | | | |
 | Tile 1 x 6 with Groove  | Orange
| 1 | | | |
 | Plate 2 x 6  | Dark Bluish Gray
| 2 | | | |
![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526983.jpg) | Technic Pin Connector Round [Slotted]  | Yellow
| 2 | | | |
 | Brick 2 x 6  | Blue
| 1 | | | |
 | Helmet, Standard  | White
| 1 | | | |
 | Technic Pin 1/2  | Blue
| 7 | | | |
 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs  | Flat Silver
| 1 | | | |
 | Plate 2 x 12  | Blue
| 1 | | | |
 | Plate 4 x 6  | Dark Bluish Gray
| 1 | | | |
 | Slope 33° 3 x 2  | Dark Bluish Gray
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Bluish Gray
| 4 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146215.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | White
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Green
| 4 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | Black
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Green
| 4 | | | |
 | Plate 1 x 1  | White
| 3 | | | |
 | Plate 2 x 2  | Blue
| 3 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4500462.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Red
| 2 | | | |
 | Plate 2 x 3  | Red
| 2 | | | |
 | Brick 2 x 4  | Blue
| 1 | | | |
 | Plate 2 x 6  | Orange
| 2 | | | |
 | Plate 1 x 10  | Black
| 1 | | | |
 | Brick 2 x 2  | White
| 2 | | | |
 | Plate 2 x 6  | Blue
| 2 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4105202.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | White
| 1 | | | |
 | Plate 2 x 6  | White
| 1 | | | |
 | Container Box 2 x 2 x 2 - Top Opening  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 3  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Light Bluish Gray
| 2 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 2  | Dark Bluish Gray
| 2 | | | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Black
| 2 | | | |
 | Brick and Axle Separator v2.0  | Orange
| 1 | | | |
 | Bar 1 x 4 x 2 with Studs  | Black
| 2 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Dark Bluish Gray
| 2 | | | |
 | Bar 1 x 4 x 2 with Studs  | Yellow
| 2 | | | |
 | Launcher, Weapon Gun / Blaster / Shooter Mini  | Red
| 1 | | | |
 | Equipment Medical Syringe  | Bright Light Blue
| 2 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | White
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2  | White
| 2 | | | |
 | Engine, Smooth Small, 1 x 2 Side Plate with Axle Holders and Slot  | Black
| 2 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 5 | | | |
 | Tap 1 x 1 without Hole in Spout  | Light Bluish Gray
| 3 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4118829.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Orange
| 3 | | | |
 | Container Box 2 x 2 x 2 - Top Opening  | Reddish Brown
| 1 | | | |
 | Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom  | Trans-Light Blue
| 1 | | | |
 | Plate 2 x 8  | Blue
| 1 | | | |
 | Brick 1 x 2 without Bottom Tube  | Trans-Clear
| 1 | | | |
![Image of part Glass for Window 1 x 4 x 3 [Opening]](https://cdn.rebrickable.com/media/parts/elements/6013633.jpg) | Glass for Window 1 x 4 x 3 [Opening]  | Trans-Light Blue
| 1 | | | |
 | Tile 1 x 4 with Groove  | Blue
| 1 | | | |
 | Plate 2 x 4  | White
| 1 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 1 | | | |
 | Windscreen 4 x 4 x 4 2/3 with Handle  | Trans-Light Blue
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Black
| 1 | | | |
 | Plate 3 x 3 Cross  | Black
| 1 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | White
| 1 | | | |
 | Wedge Plate 4 x 4 Cut Corner  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 2 | | | |
 | Panel 1 x 1 x 1 Corner  | White
| 2 | | | |
![Image of part Brick Special 1 x 1 x 3 with 2 Clips Vertical [Hollow Stud, Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/4563684.jpg) | Brick Special 1 x 1 x 3 with 2 Clips Vertical [Hollow Stud, Open O Clips]  | White
| 2 | | | |
 | Wedge 3 x 3 Facet  | Light Bluish Gray
| 1 | | | |
 | Equipment Binoculars  | Dark Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation  | White
| 1 | | | |
 | Tile 2 x 2 with Groove  | Reddish Brown
| 1 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/6261348.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]  | Black
| 4 | | | |
 | Plate 1 x 2  | Orange
| 4 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Dark Bluish Gray
| 1 | | | |
 | Plate 1 x 6  | Dark Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 with Lip, No Studs  | Dark Bluish Gray
| 1 | | | |
 | Plate 1 x 3  | Blue
| 1 | | | |
 | Tile 2 x 2 with Groove  | Yellow
| 1 | | | |
 | Tile 2 x 2 with Groove  | Red
| 1 | | | |
 | Tail Shuttle  | White
| 1 | | | |
 | Plate Special 1 x 4 with 2 Studs  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 3  | Light Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Red 82, Yellow and White Gauges Print  | Light Bluish Gray
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Bluish Gray
| 2 | | | |
![Image of part Equipment Radio [Extended Handle, Expanded Speaker Grille]](https://cdn.rebrickable.com/media/parts/elements/6100054.jpg) | Equipment Radio [Extended Handle, Expanded Speaker Grille]  | Black
| 2 | | | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End  | Red
| 2 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061024.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | White
| 2 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598528.jpg) | Plate Special 1 x 2 [Top Clip]  | Black
| 2 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Dark Bluish Gray
| 2 | | | |
 | Tile Round 1 x 1  | White
| 2 | | | |
 | Antenna 1 x 4 with Flat Top  | Black
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6337268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Light Bluish Gray
| 2 | | | |
 | Brick 1 x 2  | Orange
| 2 | | | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg) | Equipment Cup / Mug [Plain]  | Red
| 2 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 2 | | | |
 | Plate Special 1 x 2 with Long Towball  | Black
| 1 | | | |
 | Brick Round 2 x 2 Truncated Cone  | White
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4214760.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Yellow
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Black
| 1 | | | |
 | Slope Inverted 45° 4 x 4 Double with 4 x 2 Recessed, 2 Holes  | Orange
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 2  | Red
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4613257.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]  | Blue
| 1 | | | |
 | Turntable 2 x 2 Plate, Base  | White
| 1 | | | |
 | Turntable 2 x 2 Plate - Top  | Light Bluish Gray
| 1 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 2  | Black
| 1 | | | |
 | Handlebars with Angular Handles  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 2  | Red
| 1 | | | |
![Image of part Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/4227517.jpg) | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 2  | Light Bluish Gray
| 1 | | | |
 | Technic Beam 2 x 4 L-Shape Thick  | Dark Bluish Gray
| 1 | | | |
 | Brick 1 x 2  | Blue
| 1 | | | |
 | Lever Small Base with Black Lever  | Blue
| 2 | | | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/4263176.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]  | Dark Bluish Gray
| 2 | | | |
 | Lever Small Base with Black Lever  | Light Bluish Gray
| 2 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529235.jpg) | Cone 1 x 1 [Top Groove]  | Blue
| 2 | | | |
 | Lever Small Base with Black Lever  | Red
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Light Bluish Gray
| 2 | | | |
 | Tile Special 2 x 2 with Top Pin  | Dark Bluish Gray
| 1 | | | |
 | Steering Stand 1 x 2 with Black Steering Wheel  | Red
| 1 | | | |
 | Propeller 3 Blades 5 Diameter, Pin Hole  | Black
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Yellow
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Black
| 1 | | | |
 | Wedge Plate 4 x 4 Cut Corner  | Black
| 1 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | Light Bluish Gray
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | White
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Orange
| 1 | | | |
 | Brick Special 2 x 4, with 2 x 2 Brick with Top Pin and 1 x 2 Side Plates  | Dark Bluish Gray
| 1 | | | |
 | Steering Stand 1 x 2 with Black Steering Wheel  | Blue
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Brown
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Light Blue
| 1 | | | |
 | Propeller 4 Blade 5 Diameter with Rounded Ends, Open Hub  | Black
| 1 | | | |
 | Headwear Accessory Visor For Standard Helmet  | Trans-Brown
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise and Center Slots  | Black
| 3 | | | |
 | Tile Special 1 x 2 with Handle  | Blue
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle 2 Notched  | Red
| 1 | | | |
 | Launcher Trigger, Weapon Gun Trigger  | Dark Bluish Gray
| 1 | | | |