 | Tile 2 x 4 with White Vents print  | Dark Bluish Gray
| 28 | | | |
 | Torso, Nougat Muscles print, Warm Tan Arms and Hands  | Warm Tan
| 1 | | | |
 | Brick Curved 4 x 6 Double, 2 x 4 Cutout  | Dark Bluish Gray
| 12 | | | |
 | Tile 2 x 2 with Groove  | Black
| 191 | | | |
 | Slope 55° 1 x 6 x 5 with Bottom Stud Holders  | Light Bluish Gray
| 15 | | | |
 | Hose Rigid 3mm D. 29L / 23.2cm  | Light Bluish Gray
| 2 | | | |
 | Slope 1 x 4 with 1 x 2 Cutout  | Light Bluish Gray
| 7 | | | |
 | Tile 6 x 6 with Bottom Tubes  | Light Bluish Gray
| 29 | | | |
 | Tile 1 x 2 with Tablet, Silver/Tan Death Star Plans print  | Black
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Orange
| 81 | | | |
 | Plate Special 1 x 3 Rounded with 3 Open Studs  | Dark Bluish Gray
| 10 | | | |
 | Cylinder Quarter 2 x 2 x 5 (Wall)  | Dark Bluish Gray
| 8 | | | |
 | Plate 6 x 6  | Black
| 38 | | | |
 | Brick 1 x 6  | Black
| 61 | | | |
 | Hose Rigid 3mm D. 34L / 27.2cm  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 10  | Black
| 47 | | | |
 | Brick Special 1 x 4 with Groove  | Dark Bluish Gray
| 8 | | | |
 | Antenna 8H Whip  | Trans-Bright Green
| 9 | | | |
 | Plate 1 x 12  | Light Bluish Gray
| 47 | | | |
 | Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout  | Light Bluish Gray
| 10 | | | |
 | Tile 1 x 2 with Groove  | Black
| 134 | | | |
 | Windscreen 2 x 4 x 2 Vertical  | Trans-Black
| 1 | | | |
 | Minifig Head General Tagge, Reddish Brown Eyebrows, Nougat Lines, Condescending Stare / Open Mouth Sneer  | Light Nougat
| 1 | | | |
 | Tile 2 x 4 with Groove  | Light Bluish Gray
| 41 | | | |
 | Brick 1 x 8  | Light Bluish Gray
| 28 | | | |
 | Brick Curved 1 x 2 x 2/3 Double Curved Top, No Studs  | Black
| 6 | | | |
 | Brick 1 x 4  | Black
| 57 | | | |
![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4583898.jpg) | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]  | Dark Bluish Gray
| 14 | | | |
 | Panel 1 x 6 x 5  | Light Bluish Gray
| 10 | | | |
 | Brick 1 x 2 x 5 with Hollow Studs  | Black
| 48 | | | |
 | Hips and Light Bluish Gray Legs with Dark Bluish Grey Cargo Pants Pockets print  | Light Bluish Gray
| 1 | | | |
 | Hips and Light Bluish Gray Legs with Dark Bluish Grey Cargo Pants Pockets print  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 2  | Black
| 99 | | | |
 | Technic Axle and Pin Connector Angled #7 - 168.75°  | Red
| 8 | | | |
 | Hose Rigid 3mm D. 10L / 8.0cm  | Light Bluish Gray
| 5 | | | |
 | Plate 1 x 2  | Black
| 114 | | | |
 | Tile 2 x 4 with Groove  | Dark Bluish Gray
| 30 | | | |
 | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side  | Black
| 30 | | | |
 | Minifig Head Black Eyebrows, Peach Lips, Stern Stare  | Light Nougat
| 1 | | | |
 | Minifig Head Black Eyebrows, Peach Lips, Stern Stare  | Light Nougat
| 1 | | | |
 | Brick 1 x 1  | Black
| 70 | | | |
 | Tile 1 x 1 with Groove  | Trans-Clear
| 79 | | | |
 | Tile 1 x 8 with Groove  | Black
| 36 | | | |
 | Plate Round Corner 6 x 6  | Light Bluish Gray
| 6 | | | |
 | Brick 1 x 6  | Light Bluish Gray
| 25 | | | |
 | Plate 1 x 1  | Black
| 103 | | | |
![Image of part Neckwear Cape, Standard [Spongy Stretchable Fabric]](https://cdn.rebrickable.com/media/parts/elements/6147570.jpg) | Neckwear Cape, Standard [Spongy Stretchable Fabric]  | Dark Brown
| 1 | | | |
 | Plate 1 x 1  | Light Bluish Gray
| 101 | | | |
 | Technic Brick 1 x 1 with Axle Hole  | Red
| 24 | | | |
 | Plate 1 x 2  | Light Bluish Gray
| 100 | | | |
 | Wedge Plate 6 x 2 Left  | Light Bluish Gray
| 14 | | | |
 | Hat / Cap Imperial Officer with Hair Tan, Silver Code Disc print  | Black
| 1 | | | |
 | Hood Long, Angular  | Dark Brown
| 1 | | | |
 | Brick 2 x 4  | Light Bluish Gray
| 31 | | | |
 | Tile 1 x 2 with Stud Notch Right  | Light Bluish Gray
| 4 | | | |
 | Torso Armor with Silver Stiped Collar, Control Panel, and Belt Print, Black Arms and Hands with Silver Lines Print  | Black
| 1 | | | |
 | Wedge Plate 6 x 2 Right  | Light Bluish Gray
| 14 | | | |
 | Brick 1 x 3  | Light Bluish Gray
| 66 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6134378.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Light Bluish Gray
| 51 | | | |
 | Technic Worm Gear 6M with Axle Hole  | Light Bluish Gray
| 6 | | | |
 | Tile 1 x 2 with Stud Notch Left  | Light Bluish Gray
| 4 | | | |
 | Brick 1 x 4  | Light Bluish Gray
| 35 | | | |
 | Brick 1 x 1  | Light Bluish Gray
| 65 | | | |
 | Brick 1 x 3  | Black
| 41 | | | |
 | Plate Special 2 x 8 with Door Rail  | Black
| 16 | | | |
 | Tile 2 x 6  | Light Bluish Gray
| 16 | | | |
 | Hat / Cap Imperial Officer with Silver Code Disc Print  | Black
| 1 | | | |
 | Hat / Cap Imperial Officer with Silver Code Disc Print  | Black
| 1 | | | |
 | Brick Curved 2 x 4 x 1  | White
| 2 | | | |
 | Slope 18° 4 x 1  | Light Bluish Gray
| 28 | | | |
 | Tile 8 x 16 with 'STAR WARS DEATH STAR', Stats print  | Black
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6425507.jpg) | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]  | Black
| 52 | | | |
 | Helmet / Mask Royal Guard  | Red
| 1 | | | |
 | Brick 1 x 12  | Light Bluish Gray
| 17 | | | |
 | Brick 1 x 16  | Black
| 11 | | | |
![Image of part Equipment Wand [Individual]](https://cdn.rebrickable.com/media/parts/ldraw/15/36752a.png) | Equipment Wand [Individual]  | White
| 14 | | | |
 | Panel 1 x 6 x 5  | Black
| 13 | | | |
![Image of part Arm Mechanical with 2 Clips [Battle Droid]](https://cdn.rebrickable.com/media/parts/elements/4211658.jpg) | Arm Mechanical with 2 Clips [Battle Droid]  | Light Bluish Gray
| 28 | | | |
 | Bar Holder with Hole and Bar Handle  | Light Bluish Gray
| 39 | | | |
 | Plate 1 x 3  | Black
| 39 | | | |
 | Plate 2 x 10  | Dark Tan
| 2 | | | |
 | Brick 1 x 12  | Black
| 15 | | | |
 | Plate 2 x 6  | Light Bluish Gray
| 43 | | | |
![Image of part Slope 75° 2 x 2 x 3 [Solid Studs]](https://cdn.rebrickable.com/media/parts/elements/6007894.jpg) | Slope 75° 2 x 2 x 3 [Solid Studs]  | Light Bluish Gray
| 18 | | | |
 | Tile 1 x 6 with Groove  | Black
| 27 | | | |
 | Tile 1 x 2 with Stud Notch Right  | Dark Bluish Gray
| 13 | | | |
 | Tile 1 x 2 with Stud Notch Right  | Black
| 15 | | | |
 | Brick 1 x 8  | Dark Bluish Gray
| 16 | | | |
 | Hips and Dark Blue Legs with Dark Brown Belt, Reddish Brown Straps, Silver Buckles print  | Dark Blue
| 1 | | | |
 | Tile 1 x 1 with Groove  | Dark Bluish Gray
| 51 | | | |
 | Plate 4 x 8  | Black
| 13 | | | |
 | Tile 1 x 4 with Groove  | Light Bluish Gray
| 29 | | | |
 | Tile 1 x 2 with Groove  | Dark Bluish Gray
| 43 | | | |
 | Plate 1 x 4  | Light Bluish Gray
| 49 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4558209.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | Black
| 34 | | | |
 | Tile 1 x 8 with Groove  | Light Bluish Gray
| 21 | | | |
 | Tile 1 x 1 with Groove  | Black
| 56 | | | |
 | Tile 2 x 2 with Groove  | Dark Bluish Gray
| 28 | | | |
 | Tile 4 x 4 Curved, Macaroni  | Black
| 24 | | | |
 | Plate Special 1 x 4 Rounded with 2 Open Studs  | White
| 10 | | | |
 | Plate 1 x 3  | Light Bluish Gray
| 54 | | | |
 | Bar 2L with Stop in Center  | Light Bluish Gray
| 7 | | | |
 | Brick 1 x 2  | Light Bluish Gray
| 29 | | | |
 | Window 1 x 2 x 2 Flat Front  | Light Bluish Gray
| 13 | | | |
 | Tile 1 x 2 with Stud Notch Left  | Black
| 13 | | | |
 | Brick 1 x 1 x 5 with Solid Stud  | Black
| 24 | | | |
 | Plate 1 x 8  | Light Bluish Gray
| 24 | | | |
 | Plate 1 x 12  | Black
| 22 | | | |
 | Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout  | White
| 6 | | | |
 | Brick Special 1 x 1 with Studs on 2 Sides  | Black
| 19 | | | |
 | Minifig Head, Eyebrows, Reddish Brown Lines, Angry Stare Print  | Medium Nougat
| 1 | | | |
 | Minifig Head, Eyebrows, Reddish Brown Lines, Angry Stare Print  | Medium Nougat
| 1 | | | |
 | Brick 1 x 4  | Dark Bluish Gray
| 20 | | | |
 | Plate 4 x 10  | Light Bluish Gray
| 7 | | | |
 | Brick 1 x 1  | Dark Bluish Gray
| 58 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146223.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | Light Bluish Gray
| 58 | | | |
 | Brick 1 x 8  | Black
| 12 | | | |
 | Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs  | Light Bluish Gray
| 8 | | | |
 | Tile 1 x 3  | Black
| 26 | | | |
 | Plate Special 1 x 3 Rounded with 3 Open Studs  | Reddish Brown
| 2 | | | |
 | Brick Curved 1 x 4 x 2/3 Double, No Studs  | Dark Bluish Gray
| 5 | | | |
![Image of part Neckwear Cape, Standard [Spongy Stretchable Fabric]](https://cdn.rebrickable.com/media/parts/elements/6161040.jpg) | Neckwear Cape, Standard [Spongy Stretchable Fabric]  | White
| 1 | | | |
 | Plate 1 x 1  | Dark Bluish Gray
| 56 | | | |
 | Tile 1 x 2 with Groove  | Light Bluish Gray
| 28 | | | |
 | Plate Special 1 x 3 Rounded with 3 Open Studs  | Light Bluish Gray
| 8 | | | |
 | Plate 2 x 14  | Light Bluish Gray
| 20 | | | |
 | Plate 1 x 6  | Light Bluish Gray
| 31 | | | |
 | Tile 1 x 3  | Light Bluish Gray
| 25 | | | |
 | Weapon Hilt Symmetric  | Light Bluish Gray
| 11 | | | |
 | Brick 2 x 10  | Black
| 6 | | | |
 | Tile 1 x 2 with Stud Notch Left  | Dark Bluish Gray
| 9 | | | |
 | Helmet Imperial Gunner with White Imperial Logo Print  | Black
| 1 | | | |
 | Helmet Imperial Gunner with White Imperial Logo Print  | Black
| 1 | | | |
 | Plate 2 x 8  | Black
| 22 | | | |
 | Plate 4 x 12  | Black
| 6 | | | |
![Image of part Neckwear Cape, Standard [Spongy Stretchable Fabric]](https://cdn.rebrickable.com/media/parts/elements/6117766.jpg) | Neckwear Cape, Standard [Spongy Stretchable Fabric]  | Black
| 1 | | | |
![Image of part Neckwear Cape, Standard [Spongy Stretchable Fabric]](https://cdn.rebrickable.com/media/parts/elements/6117766.jpg) | Neckwear Cape, Standard [Spongy Stretchable Fabric]  | Black
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Bluish Gray
| 87 | | | |
 | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side  | Light Bluish Gray
| 20 | | | |
 | Plate 1 x 8  | Black
| 20 | | | |
 | Plate 2 x 8  | Light Bluish Gray
| 17 | | | |
 | Hood Long, Angular  | Black
| 1 | | | |
 | Brick 1 x 2 x 5 with Hollow Studs  | Light Bluish Gray
| 11 | | | |
 | Tile 2 x 4 with Groove  | Black
| 14 | | | |
 | Brick 1 x 12  | Dark Bluish Gray
| 8 | | | |
![Image of part Plate Special 4 x 4 with Studs on One Edge [Plain]](https://cdn.rebrickable.com/media/parts/elements/4211837.jpg) | Plate Special 4 x 4 with Studs on One Edge [Plain]  | Light Bluish Gray
| 13 | | | |
 | Tile 1 x 1 with Groove  | Light Bluish Gray
| 35 | | | |
 | Minifig Head War Machine / Val-Zod, Thick Eyebrows, Dark Brown Cheek Lines, Lopsided Smile with Teeth Print  | Reddish Brown
| 1 | | | |
 | Slope 75° 2 x 1 x 3 with Hollow Stud  | Black
| 9 | | | |
 | Tile 2 x 2 with Groove  | Light Bluish Gray
| 20 | | | |
 | Technic Axle and Pin Connector Angled #7 - 168.75°  | Light Bluish Gray
| 4 | | | |
 | Brick 2 x 6  | Black
| 12 | | | |
 | Torso Droid Plates, Concentric Circles, and Wires Print, Pearl Gold Arms and Hands with Panels Print  | Pearl Gold
| 1 | | | |
 | Tile 1 x 6 with Groove  | Light Bluish Gray
| 17 | | | |
 | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout  | Light Bluish Gray
| 4 | | | |
 | Slope 18° 2 x 1 x 2/3  | Light Bluish Gray
| 3 | | | |
 | Technic Gear Rack 1 x 4  | Light Bluish Gray
| 8 | | | |
 | Plate 2 x 16  | Light Bluish Gray
| 8 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Dark Bluish Gray
| 45 | | | |
 | Plate 2 x 12  | Black
| 14 | | | |
 | Brick Curved 1 x 1  | White
| 4 | | | |
 | Bar, Angled with 1 x 1 Round Plate / Stud on End  | Light Bluish Gray
| 16 | | | |
 | Plate 1 x 3  | Dark Bluish Gray
| 32 | | | |
 | Dish 10 x 10 Inverted (Radar) with Solid Studs  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Black
| 17 | | | |
 | Torso, Robe print, Black Arms, Tan Hands  | Black
| 1 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 36 | | | |
 | Plate 1 x 10  | Black
| 18 | | | |
 | Brick 1 x 2 x 3 with Bottom Stud Holder  | Black
| 9 | | | |
 | Plate 3 x 3  | Reddish Brown
| 5 | | | |
 | Equipment Candlestick  | Light Bluish Gray
| 14 | | | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Light Bluish Gray
| 14 | | | |
 | Brick 2 x 3  | Light Bluish Gray
| 19 | | | |
 | Hips and Black Legs with Light Bluish grey Pants Lines print  | Black
| 1 | | | |
 | Hips and Black Legs with Light Bluish grey Pants Lines print  | Black
| 1 | | | |
 | Hips and Black Legs with Light Bluish grey Pants Lines print  | Black
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Bluish Gray
| 41 | | | |
 | Plate 1 x 2  | Tan
| 51 | | | |
 | Helmet Death Star Trooper  | Black
| 1 | | | |
 | Helmet Death Star Trooper  | Black
| 1 | | | |
![Image of part Hair 2 Buns, Center Parting [New Version]](https://cdn.rebrickable.com/media/parts/elements/4624850.jpg) | Hair 2 Buns, Center Parting [New Version]  | Dark Brown
| 1 | | | |
 | Weapon Gun / Blaster Short (Star Wars)  | Black
| 8 | | | |
 | Brick 1 x 8  | White
| 8 | | | |
 | Brick 2 x 2  | Light Bluish Gray
| 25 | | | |
 | Minifig Head Leia / Soyona Santos / Captain Marvel, Brown Eyebrows, Eyelashes, Peach Lips, Smile / Angry Print  | Light Nougat
| 1 | | | |
 | Tile 1 x 4 with Groove  | Black
| 22 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Light Bluish Gray
| 22 | | | |
 | Bar 6L with Stop Ring  | Light Bluish Gray
| 18 | | | |
 | Plate 2 x 4  | Light Bluish Gray
| 33 | | | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Light Bluish Gray
| 33 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Light Bluish Gray
| 49 | | | |
 | Slope Inverted 75° 2 x 1 x 3  | Black
| 7 | | | |
 | Tile 2 x 3  | Dark Bluish Gray
| 14 | | | |
 | Plate Special 8-Sided Crystal/Gem 1 x 1 x 2/3  | Opal Trans-Light Blue
| 13 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Helmet Stormtrooper Dual Molded, Black with Dark Bluish Gray and White Markings, Black Squares on Back Print  | White
| 1 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation with Blue and Gray Astromech Droid Print (R2-D2)  | White
| 1 | | | |
 | Hair Mid Length, Smooth, Swept Aside  | Dark Tan
| 1 | | | |
 | Tile 2 x 2 Corner  | Black
| 16 | | | |
 | Brick 2 x 8  | Light Bluish Gray
| 8 | | | |
 | Tile 2 x 2 Curved, Macaroni  | Dark Bluish Gray
| 24 | | | |
 | Brick 1 x 6  | Dark Bluish Gray
| 10 | | | |
 | Plate 1 x 6  | Black
| 27 | | | |
 | Minifig Head Darth Vader, Dark Tan Wrinkles and Scars, Light Nougat Eyeshadow Print  | White
| 1 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Black
| 31 | | | |
 | Brick 2 x 8  | Black
| 6 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 37 | | | |
 | Brick 1 x 10  | Light Bluish Gray
| 8 | | | |
 | Plate 1 x 1 x 2/3 Half Round with Side Stud  | Black
| 8 | | | |
 | Leg Mechanical - Droid with Technic Pin  | White
| 2 | | | |
 | Leg Mechanical - Droid with Technic Pin  | White
| 2 | | | |
 | Plate Round 1 x 1 with Open Stud  | Trans-Clear
| 20 | | | |
 | Tile 1 x 4 with Groove  | Dark Bluish Gray
| 15 | | | |
![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4567448.jpg) | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]  | Light Bluish Gray
| 15 | | | |
 | Plate 2 x 2 Corner  | Black
| 35 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Stormtrooper, Detailed Armor with Thick Chest Lines Print, White Arms, Black Hands  | White
| 1 | | | |
 | Tile 1 x 2 with Stud Notch Right  | White
| 6 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Hips and White Legs with Armor with Black and Gray Trim Print (Stormtrooper)  | White
| 1 | | | |
 | Minifig Head Ramirez, Black Eyebrows, Reddish Brown Lips, Neutral Stare  | Sienna Brown
| 1 | | | |
 | Minifig Head Ramirez, Black Eyebrows, Reddish Brown Lips, Neutral Stare  | Sienna Brown
| 1 | | | |
 | Hips and Black Legs with Light Bluish Grey Robe print  | Black
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Bright Green
| 9 | | | |
 | Plate 6 x 8  | Black
| 5 | | | |
 | Brick 1 x 2 x 5 with Hollow Studs  | Dark Bluish Gray
| 10 | | | |
 | Plate Special 2 x 2 with Horizontal T-Bar Underneath  | Bright Light Orange
| 4 | | | |
 | Plate Special 1 x 2 with Door Rail  | Black
| 24 | | | |
 | Plate 2 x 8  | Dark Bluish Gray
| 12 | | | |
 | Bar 2L with Stop in Center  | Dark Bluish Gray
| 21 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6326078.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Light Bluish Gray
| 55 | | | |
 | Tile 1 x 6 with Groove  | Dark Bluish Gray
| 11 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439041.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]  | Light Bluish Gray
| 41 | | | |
 | Plate Round 1 x 1 with Open Stud  | Light Bluish Gray
| 41 | | | |
 | Minifig Head Special, Wookiee with Dark Tan Face Fur and Teeth Print (Chewbacca)  | Dark Brown
| 1 | | | |
 | Tile 1 x 1 with Groove  | Reddish Brown
| 27 | | | |
 | Slope 45° 2 x 2  | Light Bluish Gray
| 23 | | | |
 | Brick 2 x 2 Corner  | Black
| 23 | | | |
 | Slope 33° 3 x 1  | Light Bluish Gray
| 23 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6059033.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | Light Bluish Gray
| 16 | | | |
 | Tile 1 x 2 with Groove  | Reddish Brown
| 20 | | | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6254045.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | Black
| 39 | | | |
 | Tile 3 x 3 Curved, Macaroni  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 5  | Light Bluish Gray
| 13 | | | |
 | Tile 1 x 4 with Groove  | Reddish Brown
| 13 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6416524.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]  | Light Bluish Gray
| 12 | | | |
 | Plate 2 x 14  | Black
| 7 | | | |
 | Brick 2 x 2  | Black
| 22 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6308000.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]  | Black
| 38 | | | |
![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4107558.jpg) | Technic Brick 1 x 14 [13 Pin Holes]  | Black
| 4 | | | |
 | Tile 1 x 2 with Stylised Computer Console Print  | Light Bluish Gray
| 4 | | | |
![Image of part Torso, Dark Brown Arms and Hands [Plain]](https://cdn.rebrickable.com/media/parts/elements/6058788.jpg) | Torso, Dark Brown Arms and Hands [Plain]  | Dark Brown
| 1 | | | |
 | Minifig Head Palpatine, Dark Tan Wrinkles/Scars, Yellow Eyes, Angry/Open Mouth Screaming print  | Tan
| 1 | | | |
 | Plate 1 x 6  | Dark Bluish Gray
| 21 | | | |
 | Brick 1 x 10  | Dark Bluish Gray
| 5 | | | |
 | Helmet Darth Vader Type 2 Top  | Black
| 1 | | | |
![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4164471.jpg) | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]  | Black
| 16 | | | |
 | Brick Special 1 x 2 with Studs on 2 Sides  | Light Bluish Gray
| 9 | | | |
 | Plate 1 x 10  | Dark Bluish Gray
| 12 | | | |
 | Slope Curved 2 x 2 x 2/3 Inverted  | Dark Bluish Gray
| 8 | | | |
 | Plate Special 1 x 1 Rounded with Handle  | Black
| 18 | | | |
 | Plate 1 x 10  | Light Bluish Gray
| 11 | | | |
 | Technic Axle and Pin Connector Perpendicular Split  | Black
| 11 | | | |
 | Hips and Dark Brown Legs with Dark Tan Fur Print  | Dark Brown
| 1 | | | |
 | Minifig Head Reva, Eyelashes, Dark Red Lips, Serious Print  | Medium Brown
| 1 | | | |
 | Plate 4 x 6  | Light Bluish Gray
| 7 | | | |
 | Bracket 1 x 1 - 1 x 2  | Light Bluish Gray
| 10 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6093859.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Light Bluish Gray
| 15 | | | |
 | Tile 2 x 6  | Black
| 5 | | | |
 | Panel 4 x 4 x 6 Quarter Cylinder  | Dark Bluish Gray
| 3 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Dark Bluish Gray
| 7 | | | |
 | Tile 1 x 6 with Groove  | Reddish Brown
| 12 | | | |
 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side  | Light Bluish Gray
| 12 | | | |
 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side  | Black
| 11 | | | |
![Image of part Bar 1 x 3 [Clip / Anti-Stud]](https://cdn.rebrickable.com/media/parts/elements/4211644.jpg) | Bar 1 x 3 [Clip / Anti-Stud]  | Light Bluish Gray
| 11 | | | |
 | Brick 1 x 16  | Light Bluish Gray
| 3 | | | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Light Bluish Gray
| 13 | | | |
 | Plate Special 1 x 2 with Door Rail  | Light Bluish Gray
| 26 | | | |
 | Brick 1 x 2  | Dark Bluish Gray
| 13 | | | |
 | Bracket 1 x 1 - 1 x 1 Inverted  | Light Bluish Gray
| 10 | | | |
 | Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder  | Dark Bluish Gray
| 3 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Black
| 32 | | | |
 | Brick Special 1 x 1 with Studs on 2 Sides  | Light Bluish Gray
| 8 | | | |
 | Plate 1 x 5  | Black
| 8 | | | |
 | Brick Round 2 x 2 Dome Top, Hollow Stud with R2-D2 Astromech Droid Print  | Flat Silver
| 1 | | | |
 | Plate 2 x 6  | Black
| 14 | | | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Black
| 7 | | | |
 | Plate 2 x 3  | Black
| 21 | | | |
 | Plate Special 1 x 8 with Door Rail  | Light Bluish Gray
| 7 | | | |
 | Slope 30° 1 x 2 x 2/3  | Black
| 25 | | | |
 | Plate 1 x 2  | White
| 31 | | | |
 | Hips and Black Legs with Detailed Pants Print  | Black
| 1 | | | |
![Image of part Technic Brick 1 x 14 [13 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211705.jpg) | Technic Brick 1 x 14 [13 Pin Holes]  | Light Bluish Gray
| 4 | | | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Dark Bluish Gray
| 11 | | | |
 | Brick Special 1 x 4 with Groove  | Black
| 24 | | | |
 | Tile 1 x 3  | Dark Bluish Gray
| 12 | | | |
 | Wedge Plate 2 x 2 Left  | White
| 8 | | | |
 | Brick Curved 2 x 4 Double, No Studs, with Groove  | Light Bluish Gray
| 5 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | White
| 10 | | | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | Dark Purple
| 4 | | | |
 | Plate 1 x 12  | White
| 7 | | | |
 | Hips and Legs Under Dress/Robe  | Dark Purple
| 1 | | | |
 | Hips and Pearl Gold Legs with Gold Armour Plates with Dark Red Trim, Silver Right Knee and Toes Print  | Pearl Gold
| 1 | | | |
 | Brick 2 x 2 Corner  | Light Bluish Gray
| 13 | | | |
 | Brick Special 1 x 2 with Groove  | Light Bluish Gray
| 9 | | | |
 | Brick 1 x 12  | White
| 5 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Light Bluish Gray
| 19 | | | |
 | Slope Curved 2 x 2 x 2/3  | Dark Bluish Gray
| 7 | | | |
 | Door Frame 1 x 4 x 6 Type 2  | Light Bluish Gray
| 7 | | | |
 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)  | Black
| 7 | | | |
 | Plate 4 x 8  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 8  | Dark Bluish Gray
| 8 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Dark Bluish Gray
| 14 | | | |
 | Slope 30° 1 x 2 x 2/3  | Light Bluish Gray
| 14 | | | |
 | Brick Special 1 x 1 with Headlight  | Dark Bluish Gray
| 14 | | | |
 | Brick Curved 2 x 4 Double, No Studs, with Groove  | White
| 4 | | | |
 | Animal, Bird, Duck / Duckling with Black Eyes, Orange Beak  | Yellow
| 1 | | | |
 | Plate Special 1 x 1 Rounded with Handle  | Light Bluish Gray
| 9 | | | |
 | Bar, Ring 7L Diameter, with 2 Axle Connectors  | Black
| 1 | | | |
 | Plate 1 x 2  | Dark Bluish Gray
| 21 | | | |
 | Slope 65° 2 x 2 x 2 with Bottom Tube  | Light Bluish Gray
| 13 | | | |
 | Minifig Head Special, Protocol Droid with Yellow Eyes Print (C-3PO / K-3PO)  | Pearl Gold
| 1 | | | |
 | Plate 2 x 2  | Black
| 25 | | | |
 | Tile 1 x 1 with Groove  | White
| 20 | | | |
 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs  | Dark Bluish Gray
| 10 | | | |
 | Brick 2 x 6  | Dark Bluish Gray
| 5 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Trans-Light Blue
| 33 | | | |
 | Tile 2 x 2 Corner  | Dark Bluish Gray
| 9 | | | |
 | Minifig Head AT-AT Driver / Stormtrooper, Eyebrows, Reddish Brown Lips and Cheek Lines, Serious Print  | Nougat
| 1 | | | |
 | Plate Round Half 4 x 8  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Black
| 32 | | | |
 | Plate Special 2 x 2 with Horizontal T-Bar Underneath  | Tan
| 6 | | | |
 | Tile 1 x 8 with Groove  | White
| 8 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Dark Orange
| 23 | | | |
 | Plate 4 x 10  | Reddish Brown
| 4 | | | |
 | Plate 3 x 3  | Black
| 7 | | | |
 | Brick 2 x 4  | Black
| 7 | | | |
 | Slope Curved 2 x 1 Inverted  | Black
| 10 | | | |
 | Tile 45° Cut 2 x 2 (Triangle)  | Dark Bluish Gray
| 6 | | | |
 | Brick 2 x 6  | Light Bluish Gray
| 6 | | | |
 | Plate Round 1 x 1 with Hollow Stud and Underside Clip  | Trans-Clear
| 2 | | | |
 | Slope Double 45° 1 x 1  | Black
| 5 | | | |
 | Brick Special 1 x 1 with Headlight  | Light Bluish Gray
| 11 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | White
| 11 | | | |
![Image of part Technic Gear 24 Tooth [New Style with Single Axle Hole]](https://cdn.rebrickable.com/media/parts/elements/4514558.jpg) | Technic Gear 24 Tooth [New Style with Single Axle Hole]  | Dark Bluish Gray
| 3 | | | |
 | Plate 1 x 1  | Dark Brown
| 17 | | | |
 | Brick 1 x 1 x 5 with Solid Stud  | Dark Bluish Gray
| 4 | | | |
 | Plate Round 1 x 2 Half Circle with Stud (Jumper)  | White
| 3 | | | |
 | Hinge Brick 1 x 2 Base  | Black
| 7 | | | |
 | Bar 1L with Top Stud and Two Side Studs  | Light Bluish Gray
| 7 | | | |
 | Brick 1 x 2  | White
| 14 | | | |
 | Slope Curved 2 x 2 x 2/3 Inverted  | White
| 7 | | | |
 | Tile 2 x 3  | Black
| 6 | | | |
 | Plate Special 2 x 2 with Horizontal T-Bar Underneath  | Dark Bluish Gray
| 6 | | | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Metallic Silver
| 6 | | | |
 | Minifig Head, Raised Eyebrow, Mean Smile print  | Warm Tan
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6366391.jpg) | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]  | White
| 9 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Light Bluish Gray
| 20 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Black
| 20 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Dark Bluish Gray
| 16 | | | |
 | Brick 2 x 6  | White
| 5 | | | |
 | Plate Special 2 x 6 with Gear Catchers on Underside  | Light Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 4  | Black
| 4 | | | |
 | Brick 1 x 3  | Dark Bluish Gray
| 10 | | | |
 | Brick 1 x 16  | Dark Bluish Gray
| 2 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6271127.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]  | Dark Bluish Gray
| 13 | | | |
 | Tile 1 x 1 with Groove  | Dark Tan
| 13 | | | |
 | Technic Pin 1/2  | White
| 6 | | | |
 | Brick 2 x 3  | Black
| 6 | | | |
 | Plate 2 x 16  | Black
| 3 | | | |
 | Brick 1 x 4  | White
| 7 | | | |
 | Tile Round 1 x 1  | Dark Bluish Gray
| 11 | | | |
 | Turntable 2 x 2 Plate, Base  | Black
| 11 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114328.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | White
| 19 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Dark Bluish Gray
| 19 | | | |
 | Technic Gear 28 Tooth Double Bevel  | Light Bluish Gray
| 1 | | | |
 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs  | Dark Bluish Gray
| 4 | | | |
 | Plate 2 x 3  | Dark Bluish Gray
| 15 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Black
| 15 | | | |
 | Wedge 3 x 3 Facet  | Black
| 1 | | | |
 | Hair Short Wavy with Center Part  | Reddish Brown
| 1 | | | |
 | Hair Short Wavy with Center Part  | Reddish Brown
| 1 | | | |
 | Plate 2 x 2  | Light Bluish Gray
| 18 | | | |
![Image of part Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg) | Technic Gear 8 Tooth [Reinforced]  | Dark Bluish Gray
| 8 | | | |
 | Plate 2 x 3  | White
| 8 | | | |
 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side  | Dark Bluish Gray
| 8 | | | |
 | Plate 4 x 6  | White
| 3 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Light Bluish Gray
| 12 | | | |
 | Weapon Gun / Blaster Small (Star Wars)  | Black
| 6 | | | |
 | Plate 1 x 10  | White
| 6 | | | |
 | Bar 5L with Handle (Friction Ram)  | Light Bluish Gray
| 6 | | | |
 | Plate Special 4 x 6 with Studs on 3 Edges  | Light Bluish Gray
| 4 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Dark Bluish Gray
| 9 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Light Bluish Gray
| 9 | | | |
 | Tile 45° Cut 2 x 2 (Triangle)  | Black
| 14 | | | |
![Image of part Technic Gear 16 Tooth Reinforced [New Style]](https://cdn.rebrickable.com/media/parts/elements/4640536.jpg) | Technic Gear 16 Tooth Reinforced [New Style]  | Light Bluish Gray
| 5 | | | |
 | Brick 1 x 1 x 3  | Light Bluish Gray
| 10 | | | |
 | Plate 2 x 2 Corner  | Light Bluish Gray
| 10 | | | |
 | Brick 1 x 3  | White
| 10 | | | |
 | Tile Special 2 x 2 Inverted  | Dark Bluish Gray
| 5 | | | |
 | Plate 4 x 6  | Black
| 3 | | | |
 | Plate Special 1 x 4 Rounded with 2 Open Studs  | Black
| 3 | | | |
 | Slope 65° 2 x 1 x 2  | Dark Bluish Gray
| 4 | | | |
 | Technic Beam 1 x 9 Bent (7 - 3) Thick  | White
| 4 | | | |
 | Slope Curved 2 x 1 Inverted  | Tan
| 4 | | | |
 | Panel 1 x 6 x 5  | Trans-Clear
| 1 | | | |
 | Minifig Head, Brown Eyebrows, Cheek Lines, Chin Dimple, Smile / Angry Print  | Light Nougat
| 1 | | | |
 | Minifig Head, Brown Eyebrows, Cheek Lines, Chin Dimple, Smile / Angry Print  | Light Nougat
| 1 | | | |
 | Brick 2 x 3  | Dark Bluish Gray
| 6 | | | |
 | Slope 10° 6 x 8  | Light Bluish Gray
| 1 | | | |
 | Hair Short Swept Back with Sideburns and Widow's Peak  | White
| 1 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 33 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Dark Bluish Gray
| 13 | | | |
 | Plate 2 x 4  | Black
| 13 | | | |
 | Brick Special 1 x 2 with Grille  | Dark Bluish Gray
| 13 | | | |
 | Plate 1 x 4  | Black
| 13 | | | |
 | Brick Curved 1 x 4 x 2/3 Double, No Studs  | Light Bluish Gray
| 5 | | | |
 | Slope Inverted 45° 2 x 1  | Black
| 16 | | | |
 | Plate Special 1 x 4 Rounded with 2 Open Studs  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 12  | Dark Bluish Gray
| 4 | | | |
 | Brick Special 1 x 1 Studs on 4 Sides  | Black
| 4 | | | |
![Image of part Slope 75° 2 x 2 x 3 [Solid Studs]](https://cdn.rebrickable.com/media/parts/elements/6007896.jpg) | Slope 75° 2 x 2 x 3 [Solid Studs]  | Black
| 2 | | | |
 | Weapon Gun / Blaster Long (Star Wars)  | Black
| 2 | | | |
 | Slope Curved 2 x 2 x 2/3 Inverted  | Black
| 8 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Light Bluish Gray
| 8 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Light Bluish Gray
| 8 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Dark Bluish Gray
| 7 | | | |
![Image of part Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]](https://cdn.rebrickable.com/media/parts/elements/6286381.jpg) | Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]  | Black
| 7 | | | |
 | Plate 2 x 12  | Light Bluish Gray
| 3 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Black
| 9 | | | |
 | Technic Driving Ring Extension, 8 Ridges  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | Black
| 20 | | | |
 | Plate 1 x 1  | White
| 15 | | | |
 | Plate 1 x 2  | Reddish Brown
| 15 | | | |
 | Panel 1 x 4 x 2 with Side Supports - Hollow Studs  | Light Bluish Gray
| 5 | | | |
 | Brick 1 x 10  | White
| 2 | | | |
 | Plate 1 x 4  | White
| 10 | | | |
 | Plate Round 1 x 1 with Open Stud  | Dark Bluish Gray
| 10 | | | |
 | Wedge Plate 2 x 2 Cut Corner  | Dark Bluish Gray
| 10 | | | |
 | Technic Engine Crankshaft  | Light Bluish Gray
| 5 | | | |
 | Hair Combed Back  | Dark Tan
| 1 | | | |
 | Brick 1 x 6  | White
| 3 | | | |
 | Plate Special 1 x 3 Rounded with 3 Open Studs  | White
| 2 | | | |
 | Plate 1 x 1 x 2/3 Half Round with Side Stud  | Tan
| 1 | | | |
![Image of part Dish 10 x 10 Inverted [Radar] with Black Circles/Cockpit print print](https://cdn.rebrickable.com/media/parts/elements/6457969.jpg) | Dish 10 x 10 Inverted [Radar] with Black Circles/Cockpit print print  | Trans-Clear
| 1 | | | |
 | Hair Short Swept Back with Sideburns and Widow's Peak  | Light Bluish Gray
| 1 | | | |
 | Hair Tousled and Layered  | Dark Tan
| 1 | | | |
 | Hair Tousled and Layered  | Dark Tan
| 1 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Tan
| 3 | | | |
 | Tile 1 x 2 with Controls print  | Dark Bluish Gray
| 2 | | | |
 | Hair Smooth Combed Sideways  | Dark Brown
| 1 | | | |
 | Plate Special 1 x 8 with Door Rail  | Red
| 4 | | | |
 | Plate 2 x 10  | Black
| 4 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Black
| 8 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Black
| 4 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Reddish Brown
| 8 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove  | Light Bluish Gray
| 4 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Light Bluish Gray
| 11 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/4211000.jpg) | Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]  | Dark Bluish Gray
| 11 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Bluish Gray
| 11 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Black
| 5 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Light Bluish Gray
| 5 | | | |
 | Tile Round 1 x 1 Half Circle  | Reddish Brown
| 5 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Reddish Brown
| 5 | | | |
 | Sports Roller Skate  | Black
| 5 | | | |
 | Plate 1 x 8  | White
| 5 | | | |
 | Hair Short, Tousled with Side Part  | Dark Tan
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 18 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Light Bluish Gray
| 18 | | | |
 | Tile 1 x 6 with Groove  | White
| 6 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Black
| 6 | | | |
 | Brick 2 x 10  | Light Bluish Gray
| 1 | | | |
 | Door Frame 1 x 4 x 4, no Holes  | Black
| 3 | | | |
 | Tile 3 x 3 Curved, Macaroni  | White
| 3 | | | |
 | Slope Inverted 45° 2 x 1  | Dark Bluish Gray
| 9 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Dark Bluish Gray
| 13 | | | |
 | Tile 2 x 6  | Reddish Brown
| 2 | | | |
 | Tile 2 x 4 with Groove  | White
| 4 | | | |
 | Technic Driving Ring Extension, 8 Ridges  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 4  | Red
| 17 | | | |
 | Sports Roller Skate  | Light Bluish Gray
| 3 | | | |
 | Tile 4 x 4 Curved, Macaroni  | Dark Bluish Gray
| 5 | | | |
 | Tile Round 1 x 2 Half Circle  | White
| 5 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Light Bluish Gray
| 5 | | | |
 | Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes  | Light Bluish Gray
| 1 | | | |
 | Wedge Sloped 2 x 5 Left  | White
| 1 | | | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L  | Light Bluish Gray
| 7 | | | |
 | Plate Special 2 x 8 with Door Rail  | Light Bluish Gray
| 7 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6156991.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Black
| 7 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Light Blue
| 16 | | | |
 | Turntable 2 x 2 Plate - Top  | Light Bluish Gray
| 12 | | | |
 | Window 1 x 4 x 3 without Shutter Tabs  | Light Bluish Gray
| 3 | | | |
 | Weapon Gun / Blaster Short (Star Wars)  | Pearl Titanium
| 2 | | | |
 | Plate 1 x 3  | White
| 8 | | | |
 | Wedge Sloped 2 x 5 Right  | White
| 1 | | | |
 | Hair, Smooth  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | White
| 4 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6210076.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | White
| 8 | | | |
 | Hair Smooth Combed Sideways  | Dark Tan
| 1 | | | |
 | Plate Round Corner 4 x 4  | Black
| 6 | | | |
 | Wedge Plate 2 x 2 Cut Corner  | Black
| 6 | | | |
 | Slope 45° 2 x 2  | Black
| 6 | | | |
![Image of part Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]](https://cdn.rebrickable.com/media/parts/elements/6331866.jpg) | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]  | Dark Bluish Gray
| 6 | | | |
 | Tile Round 1 x 1 with Black Animal Eye print  | Yellow
| 2 | | | |
 | Plate Round 1 x 2 Half Circle with Stud (Jumper)  | Light Bluish Gray
| 2 | | | |
 | Plate 4 x 8  | Dark Bluish Gray
| 2 | | | |
 | Glass for Window 1 x 4 x 6  | Trans-Clear
| 2 | | | |
 | Wedge Plate 2 x 4 27° Right  | Light Bluish Gray
| 2 | | | |
 | Box / Crate with Handholds 3 x 4 x 1 2/3  | Dark Bluish Gray
| 1 | | | |
 | Tile Special 2 x 2 Inverted  | Light Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 23 | | | |
 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L  | Reddish Brown
| 5 | | | |
 | Plate 1 x 6  | White
| 5 | | | |
 | Door Frame 1 x 4 x 6 Type 2  | Black
| 3 | | | |
 | Plate 2 x 2  | Dark Bluish Gray
| 9 | | | |
 | Slope Inverted 45° 2 x 1  | Light Bluish Gray
| 9 | | | |
 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides  | Black
| 3 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6183784.jpg) | Technic Pin Connector Round 1L [Beam]  | Light Bluish Gray
| 9 | | | |
 | Plate 4 x 12  | Light Bluish Gray
| 1 | | | |
 | Plate Special 2 x 2 with Only 2 studs  | Reddish Brown
| 11 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146220.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | Black
| 11 | | | |
 | Brick Special 1 x 1 with Headlight  | Black
| 4 | | | |
 | Plate 1 x 12  | Reddish Brown
| 4 | | | |
 | Slope Curved 2 x 1 Inverted  | Dark Bluish Gray
| 4 | | | |
 | Plate 2 x 10  | Dark Bluish Gray
| 4 | | | |
 | Brick 2 x 2 x 3  | Light Bluish Gray
| 2 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6071299.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]  | Light Bluish Gray
| 4 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/6188112.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Medium Azure
| 1 | | | |
 | Plate 6 x 10  | Black
| 1 | | | |
 | Panel 1 x 6 x 5  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515368.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Black
| 14 | | | |
 | Tile Round 1 x 1  | White
| 14 | | | |
 | Plate Round Corner 6 x 6  | Black
| 2 | | | |
![Image of part Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]](https://cdn.rebrickable.com/media/parts/elements/6075066.jpg) | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]  | Light Bluish Gray
| 2 | | | |
![Image of part Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037664.jpg) | Brick Curved 10 x 1 [Symmetric Inside Ridges]  | Black
| 2 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Black
| 7 | | | |
 | Plate 4 x 4 Corner  | Reddish Brown
| 1 | | | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Black
| 7 | | | |
 | Plate 2 x 2 Corner  | Dark Bluish Gray
| 7 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 6 | | | |
 | Tile Round 1 x 1  | Trans-Red
| 21 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Black
| 10 | | | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Dark Tan
| 10 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Black
| 10 | | | |
 | Plate Round 1 x 1 with Open Stud  | Black
| 10 | | | |
 | Brick 1 x 2 x 3 with Bottom Stud Holder  | Light Bluish Gray
| 4 | | | |
 | Technic Disc 3 x 3  | Light Bluish Gray
| 4 | | | |
 | Plate 2 x 2 Corner  | White
| 8 | | | |
 | Bracket 1 x 2 - 2 x 2  | White
| 8 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Black
| 4 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | White
| 4 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6360077.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Yellow
| 8 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Red
| 8 | | | |
 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper)  | White
| 4 | | | |
 | Hinge Brick 1 x 2 Base  | Reddish Brown
| 4 | | | |
 | Brick 1 x 10  | Blue
| 1 | | | |
 | Tile 2 x 2 Corner  | Green
| 2 | | | |
 | Bracket 1 x 1 - 1 x 2 Inverted  | White
| 2 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Dark Bluish Gray
| 5 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Light Bluish Gray
| 5 | | | |
 | Tile Round 1 x 1 Half Circle  | Dark Bluish Gray
| 5 | | | |
 | Tile Round 1 x 1  | Trans-Clear
| 13 | | | |
 | Brick Special 1 x 1 with Handle  | Light Bluish Gray
| 13 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | White
| 3 | | | |
 | Plate Round Corner 2 x 2 with 1 x 1 Cutout  | Black
| 2 | | | |
 | Plate 2 x 12  | White
| 2 | | | |
 | Plate 6 x 6  | Dark Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Black
| 12 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Dark Bluish Gray
| 12 | | | |
 | Bracket 1 x 2 - 2 x 2  | Dark Bluish Gray
| 9 | | | |
 | Tile Round 1 x 1  | Black
| 9 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092649.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]  | Dark Bluish Gray
| 4 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370101.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | White
| 4 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth  | Dark Bluish Gray
| 4 | | | |
 | Wedge Plate 2 x 2 Right  | Light Bluish Gray
| 2 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Black
| 6 | | | |
 | Plate 4 x 4  | Light Bluish Gray
| 3 | | | |
 | Wedge Plate 4 x 2 Left  | Light Bluish Gray
| 2 | | | |
 | Brick 2 x 4  | Red
| 3 | | | |
 | Bracket 1 x 1 - 1 x 1 Inverted  | Dark Bluish Gray
| 6 | | | |
 | Tile Round 1 x 1 Quarter  | Dark Orange
| 7 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Light Bluish Gray
| 7 | | | |
 | Slope Curved 2 x 2 x 2/3  | Black
| 7 | | | |
 | Plate 4 x 8  | White
| 1 | | | |
 | Tile 1 x 2 with Groove  | Blue
| 5 | | | |
 | Tile Round 2 x 2 with Hole  | Dark Bluish Gray
| 5 | | | |
 | Tile 1 x 1 with Groove  | Trans-Light Blue
| 5 | | | |
 | Hinge Brick 2 x 2 Top Plate Thin  | Black
| 5 | | | |
 | Wedge Plate 2 x 2 Left  | Light Bluish Gray
| 2 | | | |
 | Glass for Window 1 x 4 x 6  | Black
| 2 | | | |
 | Plate 4 x 10  | Black
| 1 | | | |
 | Tile Round 1 x 1 Quarter  | Dark Bluish Gray
| 11 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 11 | | | |
 | Door 1 x 4 x 4 Lift  | Dark Bluish Gray
| 1 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Dark Bluish Gray
| 3 | | | |
 | Cone 2 x 2 x 2, Open Stud  | Light Bluish Gray
| 3 | | | |
 | Bracket 1 x 1 - 1 x 1 Inverted  | Black
| 3 | | | |
 | Hinge Brick 1 x 2 Base  | Light Bluish Gray
| 3 | | | |
 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)  | Light Bluish Gray
| 1 | | | |
![Image of part Brick Arch 1 x 3 x 2 Inverted [Inside Bow]](https://cdn.rebrickable.com/media/parts/elements/6154860.jpg) | Brick Arch 1 x 3 x 2 Inverted [Inside Bow]  | Black
| 3 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Black
| 8 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Tan
| 8 | | | |
 | Brick 1 x 6  | Reddish Brown
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6350292.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Dark Bluish Gray
| 2 | | | |
 | Slope 75° 2 x 1 x 3 with Hollow Stud  | Light Bluish Gray
| 2 | | | |
 | Bracket 1 x 1 - 1 x 2  | Black
| 2 | | | |
 | Plate Round Corner 4 x 4  | Light Bluish Gray
| 2 | | | |
 | Brick Round 4 x 4 with Recessed Center  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 1 x 3  | Black
| 4 | | | |
 | Plate 2 x 8  | Tan
| 4 | | | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Dark Bluish Gray
| 4 | | | |
 | Tile 1 x 2 with Groove  | Tan
| 4 | | | |
 | Brick 2 x 2 Corner  | White
| 4 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Dark Bluish Gray
| 4 | | | |
 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs  | Black
| 4 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Black
| 4 | | | |
 | Brick Curved 1 x 2 x 1 No Studs  | Light Bluish Gray
| 4 | | | |
 | Launcher, Weapon Crossbow Shooter  | Black
| 1 | | | |
 | Plate 4 x 12  | Dark Bluish Gray
| 1 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Dark Bluish Gray
| 10 | | | |
 | Technic Bush  | Light Bluish Gray
| 10 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4211743.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | Light Bluish Gray
| 10 | | | |
 | Plate Special 1 x 2 with Pin Hole Underneath  | Light Bluish Gray
| 10 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | White
| 10 | | | |
 | Brick Special 1 x 2 with Grille  | Black
| 6 | | | |
 | Tile 1 x 1 with Black Cross, Dark Bluish Grey/Dark Red Button print  | Light Bluish Gray
| 2 | | | |
 | Bracket 1 x 2 - 2 x 4  | Light Bluish Gray
| 6 | | | |
 | Wedge Plate 2 x 2 Right  | White
| 2 | | | |
 | Brick Special 1 x 2 with Studs on 2 Sides  | White
| 2 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | White
| 6 | | | |
 | Slope 45° 2 x 4  | Light Bluish Gray
| 3 | | | |
 | Plate Round Half 4 x 8  | Black
| 2 | | | |
 | Plate Special 1 x 2 with 2 End Towballs  | Black
| 2 | | | |
![Image of part Technic Pin Connector Round [Slotted]](https://cdn.rebrickable.com/media/parts/elements/4526985.jpg) | Technic Pin Connector Round [Slotted]  | Light Bluish Gray
| 3 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Orange
| 6 | | | |
 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)  | Dark Bluish Gray
| 3 | | | |
 | Tile 1 x 8 with Groove  | Dark Bluish Gray
| 2 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Dark Bluish Gray
| 2 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | White
| 5 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Black
| 5 | | | |
 | Bar 1 x 12 with 1 x 2 Plate End with Solid Studs and 1 x 1 Round Plate End  | Trans-Clear
| 1 | | | |
 | Technic Pin 1/2 with Friction  | Red
| 7 | | | |
![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4593678.jpg) | Panel 1 x 2 x 2 [Side Supports / Hollow Studs]  | Black
| 7 | | | |
 | Plate 2 x 2  | Blue
| 7 | | | |
![Image of part Minifig Head [Plain] [Vented Stud - 2 Holes]](https://cdn.rebrickable.com/media/parts/elements/6454719.jpg) | Minifig Head [Plain] [Vented Stud - 2 Holes]  | Black
| 1 | | | |
 | Plate 1 x 3  | Blue
| 4 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Black
| 4 | | | |
 | Plate 2 x 6  | Dark Bluish Gray
| 4 | | | |
![Image of part Dish 3 x 3 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211787.jpg) | Dish 3 x 3 Inverted [Radar]  | Light Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 4  | Dark Bluish Gray
| 2 | | | |
 | Tile 1 x 2 with Groove  | Trans-Light Blue
| 4 | | | |
 | Plate 2 x 10  | Light Bluish Gray
| 2 | | | |
 | Tile 2 x 2 Curved, Macaroni  | Dark Orange
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Light Bluish Gray
| 14 | | | |
 | Plate Special 1 x 2 with 5.9mm Centre Side Towball  | Dark Bluish Gray
| 9 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Light Bluish Gray
| 3 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Black
| 3 | | | |
 | Plate 1 x 8  | Tan
| 3 | | | |
 | Plate 2 x 4  | White
| 3 | | | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | Light Bluish Gray
| 3 | | | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6325717.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]  | Reddish Brown
| 3 | | | |
 | Slope 25° 1 x 8 x 3  | White
| 1 | | | |
 | Plate Special 2 x 2 with Pin on Bottom  | Black
| 1 | | | |
![Image of part Dish 4 x 4 Inverted with Open Stud [Radar]](https://cdn.rebrickable.com/media/parts/elements/6252205.jpg) | Dish 4 x 4 Inverted with Open Stud [Radar]  | Trans-Clear
| 1 | | | |
 | Plate 2 x 12  | Reddish Brown
| 2 | | | |
 | Plate 4 x 6  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 5  | Tan
| 2 | | | |
 | Door Frame 1 x 4 x 6 Type 2  | White
| 2 | | | |
 | Slope 18° 4 x 2  | Black
| 2 | | | |
 | Technic Axle and Pin Connector Angled #6 - 90°  | Light Bluish Gray
| 2 | | | |
 | Tile 2 x 3  | Tan
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove  | Light Bluish Gray
| 5 | | | |
 | Bracket 1 x 2 - 2 x 2 Inverted  | Black
| 5 | | | |
 | Plate Round 4 x 4 with 2 x 2 Round Opening  | White
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4163711.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Red
| 8 | | | |
![Image of part Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg) | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]  | Light Bluish Gray
| 8 | | | |
 | Wedge 2 x 2 Facet  | Black
| 6 | | | |
![Image of part Plate Special 1 x 4 with 2 Studs with Groove [New Underside]](https://cdn.rebrickable.com/media/parts/elements/6257593.jpg) | Plate Special 1 x 4 with 2 Studs with Groove [New Underside]  | Light Bluish Gray
| 6 | | | |
 | Plate 1 x 2  | Medium Azure
| 6 | | | |
 | Tile Round 1 x 1  | Trans-Dark Blue
| 6 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Tan
| 6 | | | |
 | Bar Holder with Clip  | Dark Bluish Gray
| 4 | | | |
 | Slope Curved 2 x 1 with Stud Notch Right  | Black
| 2 | | | |
 | Brick 1 x 1 x 5 with Solid Stud  | White
| 4 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Light Bluish Gray
| 4 | | | |
 | Plate Round Corner 4 x 4  | Dark Bluish Gray
| 4 | | | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle  | Dark Bluish Gray
| 4 | | | |
 | Plate 1 x 10  | Red
| 2 | | | |
 | Slope 33° 3 x 2  | Black
| 4 | | | |
 | Slope Inverted 33° 3 x 2, Round Bottom Pin  | Dark Bluish Gray
| 4 | | | |
![Image of part Panel 1 x 2 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4585429.jpg) | Panel 1 x 2 x 3 [Side Supports / Hollow Studs]  | Light Bluish Gray
| 4 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Red
| 2 | | | |
 | Technic Gear 12 Tooth Double Bevel  | Black
| 4 | | | |
 | Brick 2 x 4  | Reddish Brown
| 2 | | | |
 | Brick Special 1 x 4 with Groove  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 8 with Door Rail  | Dark Bluish Gray
| 2 | | | |
 | Slope Curved 2 x 1 with Stud Notch Left  | Black
| 2 | | | |
 | Brick 1 x 1  | White
| 4 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth  | Black
| 4 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Dark Bluish Gray
| 2 | | | |
 | Hinge Brick 2 x 2 Top Plate Thin  | Light Bluish Gray
| 4 | | | |
 | Plate 2 x 6  | Reddish Brown
| 4 | | | |
 | Brick 1 x 1 x 5 with Solid Stud  | Light Bluish Gray
| 2 | | | |
 | Brick 1 x 2 x 5 with Hollow Studs  | White
| 2 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | Light Bluish Gray
| 4 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4594686.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | Trans-Clear
| 1 | | | |
 | Plate Round Corners 2 x 6 Double  | Light Bluish Gray
| 4 | | | |
 | Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection  | Light Bluish Gray
| 4 | | | |
 | Brick Curved 1 x 4 x 2/3 Double, No Studs  | White
| 2 | | | |
 | Bar, Angled with 1 x 1 Round Plate / Stud on End  | Trans-Clear
| 3 | | | |
 | Plate 1 x 10  | Tan
| 3 | | | |
 | Bracket 2 x 2 with 1 x 2 Vertical Studs  | Black
| 3 | | | |
 | Technic Axle Pin 3L without Friction Ridges and 2L Axle  | White
| 3 | | | |
 | Slope Curved 2 x 2 x 2/3  | Tan
| 3 | | | |
 | Wedge Curved 10 x 3 Right  | Light Bluish Gray
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Clear
| 1 | | | |
 | Wedge Plate 2 x 4 27° Left  | Light Bluish Gray
| 1 | | | |
 | Wedge Curved 10 x 3 Left  | Light Bluish Gray
| 1 | | | |
 | Plate 4 x 10  | Dark Bluish Gray
| 1 | | | |
 | Technic Gear 20 Tooth Bevel with Pin Hole  | Light Bluish Gray
| 2 | | | |
 | Plate Special 1 x 2 Rounded with 2 Open Studs  | Yellow
| 2 | | | |
![Image of part Equipment Wand [Individual]](https://cdn.rebrickable.com/media/parts/ldraw/0/36752a.png) | Equipment Wand [Individual]  | Black
| 2 | | | |
 | Plate Special 1 x 8 with Door Rail  | Black
| 2 | | | |
 | Bar 1 x 3 (Radio Handle, Phone Handset)  | Dark Bluish Gray
| 1 | | | |
 | Plate 4 x 4  | Black
| 2 | | | |
 | Plate Round Half 3 x 6 with 1 x 2 Cutout  | Black
| 2 | | | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced  | Light Bluish Gray
| 11 | | | |
 | Plate 2 x 2  | Yellow
| 7 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Bluish Gray
| 7 | | | |
 | Plate Special 1 x 4 with Bar Down  | Black
| 7 | | | |
 | Technic Pin 1/2  | Light Bluish Gray
| 7 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Trans-Clear
| 1 | | | |
 | Plate 2 x 12  | Tan
| 1 | | | |
 | Slope 18° 4 x 2  | Light Bluish Gray
| 1 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Blue
| 3 | | | |
 | Wedge Plate 2 x 2 Cut Corner  | Light Bluish Gray
| 3 | | | |
 | Brick 2 x 2  | Dark Bluish Gray
| 3 | | | |
 | Plate Round 6 x 6 with Hole  | Light Bluish Gray
| 3 | | | |
 | Bar 3L  | Light Bluish Gray
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Metallic Silver
| 3 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | White
| 5 | | | |
 | Brick Round 1 x 1 Open Stud  | White
| 5 | | | |
 | Tile Round 1 x 1  | Light Bluish Gray
| 5 | | | |
 | Plate 1 x 1  | Dark Orange
| 5 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [New Version]](https://cdn.rebrickable.com/media/parts/elements/4621917.jpg) | Slope 45° 2 x 1 with 2/3 Cutout [New Version]  | Dark Bluish Gray
| 5 | | | |
 | Tile 2 x 2 Corner  | Reddish Brown
| 2 | | | |
 | Panel 1 x 4 x 2 with Side Supports - Hollow Studs  | Dark Bluish Gray
| 2 | | | |
 | Slope 33° 3 x 2  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/6146321.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Dark Bluish Gray
| 4 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Dark Bluish Gray
| 4 | | | |
 | Technic Axle and Pin Connector Angled #3 - 157.5°  | Black
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Green
| 4 | | | |
 | Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder  | Light Bluish Gray
| 2 | | | |
![Image of part Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]](https://cdn.rebrickable.com/media/parts/elements/4567449.jpg) | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]  | White
| 4 | | | |
 | Brick 1 x 1  | Reddish Brown
| 4 | | | |
 | Slope 30° 1 x 2 x 2/3  | White
| 4 | | | |
![Image of part Brick Arch 1 x 3 x 2 Inverted [Inside Bow]](https://cdn.rebrickable.com/media/parts/elements/6172811.jpg) | Brick Arch 1 x 3 x 2 Inverted [Inside Bow]  | Dark Bluish Gray
| 2 | | | |
 | Slope Curved 2 x 2 x 2/3 Inverted  | Light Bluish Gray
| 2 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/6416444.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]  | Black
| 2 | | | |
 | Plate 4 x 4 Corner  | White
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6237716.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Medium Azure
| 4 | | | |
 | Tile 1 x 4 with Groove  | Tan
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Tan
| 4 | | | |
 | Plate 4 x 8  | Reddish Brown
| 1 | | | |
 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side  | Yellow
| 1 | | | |
 | Exhaust Pipe with Technic Pin - Flat End, Squared Hole  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 8  | Tan
| 1 | | | |
 | Brick 1 x 8  | Reddish Brown
| 1 | | | |
 | Plate 1 x 2  | Yellow
| 6 | | | |
![Image of part Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]](https://cdn.rebrickable.com/media/parts/elements/6439040.jpg) | Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]  | Dark Bluish Gray
| 6 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278273.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Light Bluish Gray
| 6 | | | |
 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides  | Black
| 2 | | | |
 | Brick Special 1 x 1 with Stud on 1 Side  | Reddish Brown
| 2 | | | |
 | Tile 1 x 2 with Groove  | Dark Red
| 2 | | | |
 | Tile 4 x 4 Curved, Macaroni  | Light Bluish Gray
| 2 | | | |
 | Tile 45° Cut 2 x 2 (Triangle)  | Light Bluish Gray
| 2 | | | |
 | Slope 18° 4 x 1  | Dark Bluish Gray
| 2 | | | |
 | Plate 1 x 8  | Reddish Brown
| 2 | | | |
 | Plate Special 1 x 2 with Door Rail  | Red
| 2 | | | |
 | Brick Curved 2 x 1 with Inverted Cutout  | White
| 2 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Light Bluish Gray
| 2 | | | |
 | Plate Round Half 4 x 8  | Dark Bluish Gray
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Light Bluish Gray
| 1 | | | |
 | Tile 1 x 4 with Groove  | White
| 3 | | | |
 | Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Long Tip)  | Reddish Brown
| 1 | | | |
 | Wedge Plate 3 x 2 Right  | Black
| 3 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Black
| 3 | | | |
 | Wedge Plate 3 x 2 Left  | Black
| 3 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Trans-Light Blue
| 3 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146225.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | Dark Bluish Gray
| 3 | | | |
 | Plate 1 x 1 x 2/3 Half Round with Side Stud  | Light Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Groove  | Yellow
| 3 | | | |
 | Slope 45° 2 x 2  | Dark Bluish Gray
| 3 | | | |
 | Plate 1 x 10  | Yellow
| 1 | | | |
 | Panel 1 x 4 x 2 with Side Supports - Hollow Studs  | Black
| 3 | | | |
 | Brick 2 x 2 Corner  | Dark Bluish Gray
| 3 | | | |
 | Tile Round 1 x 1  | Trans-Orange
| 9 | | | |
 | Technic Axle 3  | Yellow
| 9 | | | |
 | Plate 4 x 4  | White
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2  | Tan
| 4 | | | |
 | Plate Round 1 x 1 with Open Stud  | Dark Red
| 4 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Dark Bluish Gray
| 4 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211541.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Light Bluish Gray
| 4 | | | |
 | Slope 18° 4 x 1  | Black
| 4 | | | |
 | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center  | Black
| 4 | | | |
 | Slope 33° 3 x 1  | Black
| 4 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Reddish Brown
| 4 | | | |
 | Plate 2 x 2  | Tan
| 4 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Red
| 1 | | | |
 | Tile Round 2 x 2 with Hole  | White
| 1 | | | |
 | Tile 2 x 3  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 3 x 4 with 1 x 4 Center Studs [Plain]](https://cdn.rebrickable.com/media/parts/elements/6079461.jpg) | Plate Special 3 x 4 with 1 x 4 Center Studs [Plain]  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 1 with Studs on 2 Sides  | Black
| 1 | | | |
 | Slope Curved 4 x 1 Inverted  | Light Bluish Gray
| 2 | | | |
 | Equipment Cutlery - Spoon, Flat Bottom  | Flat Silver
| 2 | | | |
 | Equipment Cutlery - Fork  | Flat Silver
| 2 | | | |
 | Brick 1 x 2 x 3 with Bottom Stud Holder  | White
| 2 | | | |
 | Panel 1 x 1 x 1 Corner  | Dark Bluish Gray
| 2 | | | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | White
| 2 | | | |
 | Panel 1 x 1 x 1 Corner  | Light Bluish Gray
| 2 | | | |
 | Wedge Plate 4 x 2 Left  | Dark Bluish Gray
| 2 | | | |
 | Wedge Plate 4 x 2 Right  | Dark Bluish Gray
| 2 | | | |
![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/4650645.jpg) | Brick Round 2 x 2 [Grill]  | Light Bluish Gray
| 2 | | | |
 | Plate Round Corner 3 x 3  | Yellow
| 2 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | White
| 2 | | | |
![Image of part Panel 1 x 2 x 2 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/4593679.jpg) | Panel 1 x 2 x 2 [Side Supports / Hollow Studs]  | Light Bluish Gray
| 2 | | | |
 | Plate Special / Shield Rectangular with 4 Studs, Handle  | Dark Bluish Gray
| 2 | | | |
 | Tile 1 x 1 with Groove  | Trans-Red
| 8 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Blue
| 5 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Black
| 5 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | White
| 5 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4214760.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Trans-Yellow
| 3 | | | |
 | Plate 2 x 12  | Dark Bluish Gray
| 1 | | | |
 | Slope 30° 1 x 2 x 2/3 with Buttons And Red Screens Print  | Dark Bluish Gray
| 1 | | | |
 | Plate 3 x 3 Corner  | Black
| 1 | | | |
 | Wedge 4 x 4 Facet  | Black
| 3 | | | |
 | Tile 1 x 2 with Groove  | Red
| 3 | | | |
![Image of part Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version]](https://cdn.rebrickable.com/media/parts/elements/6052786.jpg) | Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version]  | Dark Bluish Gray
| 1 | | | |
 | Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection  | Black
| 3 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Yellow
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Black
| 3 | | | |
 | Equipment Medical Syringe with 2 Holes  | Light Bluish Gray
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove  | Dark Bluish Gray
| 3 | | | |
 | Equipment Medical Syringe with 2 Holes  | Light Bluish Gray
| 1 | | | |
 | Technic Pin with Friction Ridges Lengthwise with No Center Slots  | Black
| 15 | | | |
 | Wedge 3 x 2 Right  | Black
| 2 | | | |
 | Technic Axle and Pin Connector Angled #4 - 135°  | Dark Bluish Gray
| 2 | | | |
 | Wheel 11 x 8 with Center Groove  | Light Bluish Gray
| 2 | | | |
 | Tile Special 1 x 1 with Clip with Rounded Edges  | Dark Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space  | Trans-Clear
| 2 | | | |
 | Brick 1 x 8  | Red
| 1 | | | |
 | Plate Round Corner 3 x 3  | White
| 2 | | | |
 | Bracket 1 x 1 - 1 x 1  | Light Bluish Gray
| 2 | | | |
 | Technic Axle 8  | Black
| 1 | | | |
 | Plate 2 x 6  | Tan
| 2 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Tan
| 2 | | | |
 | Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3  | Black
| 2 | | | |
 | Wedge 3 x 2 Left  | Black
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | White
| 2 | | | |
 | Tile 2 x 2 with Groove  | Yellow
| 2 | | | |
 | Slope Double 45° 1 x 1  | Light Bluish Gray
| 2 | | | |
 | Technic Brick 1 x 1 with Axle Hole  | Dark Bluish Gray
| 1 | | | |
 | Wave / Lightning Angular, Single  | Trans-Light Blue
| 2 | | | |
 | Window 1 x 4 x 3 without Shutter Tabs  | Black
| 1 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092570.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]  | Black
| 2 | | | |
 | Brick Round 2 x 2 Dome Top, Vented Stud  | Black
| 1 | | | |
 | Tile Special 2 x 2 Inverted  | Black
| 1 | | | |
 | Plate 2 x 3 with 1 x 1 Cutout  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 3 x 2 Left  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 1 with Stud Notch Left  | White
| 1 | | | |
 | Tile 2 x 3  | Reddish Brown
| 1 | | | |
 | Tile 1 x 6 with Groove  | Blue
| 1 | | | |
 | Technic Axle 9  | Light Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 5.9mm Centre Side Towball Socket  | Light Bluish Gray
| 4 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]](https://cdn.rebrickable.com/media/parts/elements/6168618.jpg) | Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]  | White
| 4 | | | |
 | Wedge Plate 2 x 4  | Black
| 4 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515369.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Light Bluish Gray
| 4 | | | |
 | Wedge Plate 2 x 4  | Light Bluish Gray
| 4 | | | |
 | Plate 1 x 2  | Trans-Red
| 4 | | | |
 | Slope Inverted 45° 2 x 1  | White
| 4 | | | |
 | Brick Round 1 x 1 Open Stud  | Yellow
| 4 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Light Bluish Gray
| 4 | | | |
 | Plate 2 x 3  | Medium Azure
| 4 | | | |
 | Plate Special 1 x 2 5.9mm Towball Socket  | Light Bluish Gray
| 4 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | White
| 4 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 4 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6121485.jpg) | Technic Pin Connector Round 1L [Beam]  | Black
| 3 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211440.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Light Bluish Gray
| 3 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Tan
| 3 | | | |
 | Plate 1 x 3  | Tan
| 3 | | | |
 | Tile 1 x 2 with Groove  | White
| 3 | | | |
 | Plate 2 x 4  | Tan
| 3 | | | |
 | Tile Round 1 x 1 Quarter  | Light Bluish Gray
| 3 | | | |
 | Technic Axle 2 Notched  | Black
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Dark Blue
| 3 | | | |
![Image of part Technic Pin Connector Round 1L [Beam]](https://cdn.rebrickable.com/media/parts/elements/6100030.jpg) | Technic Pin Connector Round 1L [Beam]  | Dark Bluish Gray
| 3 | | | |
 | Plate 1 x 4  | Reddish Brown
| 3 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Black
| 3 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Black
| 2 | | | |
![Image of part Panel 1 x 4 x 3 [Side Supports / Hollow Studs]](https://cdn.rebrickable.com/media/parts/elements/6008715.jpg) | Panel 1 x 4 x 3 [Side Supports / Hollow Studs]  | Dark Bluish Gray
| 1 | | | |
![Image of part Brick Round 2 x 2 [Grill]](https://cdn.rebrickable.com/media/parts/elements/6024730.jpg) | Brick Round 2 x 2 [Grill]  | Black
| 2 | | | |
 | Wedge Plate 3 x 2 Right  | Light Bluish Gray
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Light Blue
| 2 | | | |
 | Plate 1 x 6  | Dark Brown
| 1 | | | |
 | Slope Curved 2 x 1 with Stud Notch Right  | White
| 1 | | | |
 | Tile 1 x 8 with Groove  | Reddish Brown
| 1 | | | |
 | Technic Axle 6  | Black
| 2 | | | |
 | Brick 2 x 3  | White
| 1 | | | |
 | Brick 1 x 2 x 2 with Inside Stud Holder  | Light Bluish Gray
| 2 | | | |
 | Wedge Curved 4 x 4 No Top Studs  | Black
| 1 | | | |
 | Wedge Plate 2 x 2 Left  | Black
| 1 | | | |
 | Tile 2 x 2 Corner  | Light Bluish Gray
| 1 | | | |
 | Brick 2 x 4  | White
| 1 | | | |
 | Tile 1 x 8 with Groove  | Red
| 1 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370126.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Black
| 1 | | | |
 | Brick 1 x 4  | Reddish Brown
| 1 | | | |
 | Plate 1 x 6  | Reddish Brown
| 2 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6347310.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Black
| 6 | | | |
 | Tile 1 x 6 with Groove  | Tan
| 1 | | | |
 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end  | Pearl Titanium
| 1 | | | |
 | Bar 3L  | Dark Bluish Gray
| 1 | | | |
 | Wedge Plate 2 x 2 Right  | Black
| 1 | | | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/6238856.jpg) | Equipment Cup / Mug [Plain]  | Trans-Clear
| 1 | | | |
 | Plate Round 4 x 4 with 2 x 2 Round Opening  | Black
| 1 | | | |
 | Bar 3L  | Dark Bluish Gray
| 1 | | | |
![Image of part Equipment Wand [Individual]](https://cdn.rebrickable.com/media/parts/ldraw/0/36752a.png) | Equipment Wand [Individual]  | Black
| 1 | | | |
 | Wedge Plate 8 x 8 Cut Corner  | Light Bluish Gray
| 1 | | | |
 | Brick Round 2 x 2 Truncated Cone  | Light Bluish Gray
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth  | Black
| 2 | | | |
 | Brick Special 2 x 2 with Grooves and Axle Hole  | Dark Orange
| 1 | | | |
 | Tile Round 2 x 2 with Hole  | Black
| 1 | | | |
![Image of part Plate Special 1 x 2 [Open O Top Clip]](https://cdn.rebrickable.com/media/parts/elements/6344754.jpg) | Plate Special 1 x 2 [Open O Top Clip]  | Dark Bluish Gray
| 2 | | | |
 | Brick 2 x 2 Corner  | Reddish Brown
| 2 | | | |
 | Plate 2 x 2  | Dark Tan
| 2 | | | |
 | Tile Special 2 x 3 Pentagonal  | Black
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Light Bluish Gray
| 2 | | | |
 | Technic Ball Joint  | Black
| 1 | | | |
 | Slope Inverted 33° 3 x 2, Round Bottom Pin  | Light Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | Dark Bluish Gray
| 2 | | | |
 | Plate 3 x 3  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 6 x 6 Cut Corner  | Black
| 2 | | | |
 | Brick Round 1 x 1 Open Stud  | Dark Bluish Gray
| 2 | | | |
 | Brick and Axle Separator v2.0  | Orange
| 1 | | | |
 | Tile 1 x 1 with Groove  | Tan
| 2 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Red
| 2 | | | |
![Image of part Musical Instrument Microphone [Plain]](https://cdn.rebrickable.com/media/parts/elements/6088550.jpg) | Musical Instrument Microphone [Plain]  | Black
| 2 | | | |
 | Tile 1 x 3  | Tan
| 1 | | | |
 | Brick 1 x 3  | Yellow
| 2 | | | |
 | Bracket 1 x 2 - 2 x 2  | Black
| 2 | | | |
 | Slope 33° 3 x 2  | White
| 1 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 5 | | | |
![Image of part Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6345426.jpg) | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]  | Light Bluish Gray
| 5 | | | |
 | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot  | Blue
| 5 | | | |
![Image of part Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/6321747.jpg) | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]  | Light Bluish Gray
| 5 | | | |
 | Tile Round 1 x 1  | Trans-Light Blue
| 5 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 5 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4587212.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]  | Dark Bluish Gray
| 3 | | | |
 | Plate 2 x 2  | Reddish Brown
| 3 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278274.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Dark Bluish Gray
| 3 | | | |
 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle  | Black
| 3 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | White
| 3 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | White
| 3 | | | |
![Image of part Equipment Cup / Mug [Plain]](https://cdn.rebrickable.com/media/parts/elements/389921.jpg) | Equipment Cup / Mug [Plain]  | Red
| 3 | | | |
 | Brick Round 1 x 1 Open Stud  | Red
| 3 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370021.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Red
| 3 | | | |
 | Plate 1 x 2  | Dark Tan
| 3 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Dark Bluish Gray
| 3 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth  | Black
| 3 | | | |
 | Minifig Neckwear Collar SW Darth Vader Helmet Bottom  | Black
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Light Bluish Gray
| 1 | | | |
 | Technic Beam 1 x 3 Thin  | Light Bluish Gray
| 1 | | | |
 | Slope Curved 2 x 2 x 2/3  | Reddish Brown
| 1 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | White
| 1 | | | |
 | Plate Special 1 x 2 with Clip Vertical on End  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 4 x 2 Left  | White
| 1 | | | |
 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version  | Blue
| 1 | | | |
![Image of part Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes]](https://cdn.rebrickable.com/media/parts/elements/6282144.jpg) | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes]  | Dark Bluish Gray
| 1 | | | |
 | Minifig Neckwear Collar SW Darth Vader Helmet Bottom  | Black
| 1 | | | |
 | Plate 2 x 4  | Reddish Brown
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/408126.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Black
| 2 | | | |
 | Technic Disc 3 x 3  | Black
| 2 | | | |
 | Slope Curved 4 x 1 Inverted  | Black
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Dark Bluish Gray
| 2 | | | |
 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)  | Black
| 2 | | | |
 | Plate Round 1 x 1 with Open Stud  | Trans-Light Blue
| 2 | | | |
 | Plate Round 1 x 1 with Open Stud  | Yellow
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6310268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Black
| 2 | | | |
 | Plate 2 x 2 Corner  | Green
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Dark Bluish Gray
| 2 | | | |
 | Bracket 1 x 2 - 1 x 2  | White
| 1 | | | |
 | Slope 33° 3 x 1  | Reddish Brown
| 1 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On Top  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 1 with Headlight  | Reddish Brown
| 1 | | | |
 | Technic Beam 1 x 7 Thick  | Dark Bluish Gray
| 1 | | | |
 | Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side  | Red
| 1 | | | |
 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 4 with 4 Studs on One Side  | Dark Bluish Gray
| 1 | | | |
 | Tile 1 x 2 with Video Tape and Reels Print  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 8 x 8 Cut Corner  | Black
| 1 | | | |
 | Brick Special 2 x 4 x 1 1/3 with Axle Holes and 2 x 2 Recessed and Hole  | Dark Bluish Gray
| 1 | | | |
 | Tile Special 2 x 2 Inverted  | Tan
| 1 | | | |
 | Plate Special 4 x 4 with 2 x 2 Opening  | Dark Bluish Gray
| 1 | | | |
 | Wedge Plate 4 x 2 Right  | White
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Opal Trans-Clear
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Pearl Gold
| 4 | | | |
 | Technic Axle 3  | Light Bluish Gray
| 4 | | | |
 | Slope 33° 3 x 1  | White
| 1 | | | |
 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider  | Reddish Brown
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | White
| 1 | | | |
 | Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom  | White
| 1 | | | |
![Image of part Technic Plate 2 x 6 [5 Holes]](https://cdn.rebrickable.com/media/parts/elements/3200126.jpg) | Technic Plate 2 x 6 [5 Holes]  | Black
| 1 | | | |
 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud  | White
| 1 | | | |
![Image of part Technic Plate 2 x 4 [3 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211444.jpg) | Technic Plate 2 x 4 [3 Holes]  | Light Bluish Gray
| 1 | | | |
 | Brick Special 1 x 2 with 2 Studs on 1 Side  | Red
| 1 | | | |
 | Tile Special 2 x 2 Corner with Cut Corner - Facet  | Black
| 1 | | | |
 | Slope 65° 2 x 1 x 2  | Light Bluish Gray
| 1 | | | |
![Image of part Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]](https://cdn.rebrickable.com/media/parts/elements/6435857.jpg) | Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]  | Light Bluish Gray
| 1 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Tan
| 2 | | | |
![Image of part Panel 1 x 2 x 1 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6146215.jpg) | Panel 1 x 2 x 1 [Rounded Corners]  | White
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Red
| 2 | | | |
 | Brick Special 1 x 2 with Handle  | Light Bluish Gray
| 2 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529241.jpg) | Cone 1 x 1 [Top Groove]  | Light Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Green
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Reddish Brown
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Trans-Red
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Dark Bluish Gray
| 2 | | | |
 | Brick 1 x 1  | Yellow
| 2 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | White
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 1 Finger On Top  | Black
| 2 | | | |
 | Tile Round 1 x 1 with Hollow Bar  | Trans-Clear
| 2 | | | |
 | Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)  | Dark Purple
| 2 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | Black
| 2 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Blue
| 2 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/4594238.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]  | Light Bluish Gray
| 2 | | | |
 | Tile Round 1 x 1  | Yellow
| 2 | | | |
 | Technic Axle 5  | Light Bluish Gray
| 2 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4114053.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | Tan
| 2 | | | |
![Image of part Brick Round 2 x 2 Dome Bottom [Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6102756.jpg) | Brick Round 2 x 2 Dome Bottom [Open Stud]  | Flat Silver
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Reddish Brown
| 1 | | | |
 | Brick 1 x 2  | Tan
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 8 x 3, 22° Right  | Light Bluish Gray
| 1 | | | |
 | Brick 1 x 1 x 3  | White
| 1 | | | |
 | Wedge Plate 8 x 3, 22° Left  | Light Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with End Towball  | Dark Bluish Gray
| 1 | | | |
 | Plate 2 x 3  | Red
| 1 | | | |
 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole  | Black
| 1 | | | |
 | Panel 1 x 1 x 1 Corner  | Black
| 1 | | | |
 | Plate 2 x 4  | Dark Purple
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Reddish Brown
| 1 | | | |
 | Plate 1 x 4  | Green
| 1 | | | |
 | Bracket 1 x 2 - 1 x 2  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle and Pin Connector Angled #2 - 180°  | Black
| 1 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Black
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Blue
| 3 | | | |
 | Lever Small Base with Black Lever  | Light Bluish Gray
| 3 | | | |
![Image of part Tile Special 2 x 2 with Top Pin [Squared Holes]](https://cdn.rebrickable.com/media/parts/elements/6313138.jpg) | Tile Special 2 x 2 with Top Pin [Squared Holes]  | White
| 3 | | | |
 | Technic Axle 7  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Light Bluish Gray
| 1 | | | |
![Image of part Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6028813.jpg) | Slope Curved 2 x 1 No Studs [1/2 Bow]  | Light Bluish Gray
| 1 | | | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512360.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation]  | Light Bluish Gray
| 1 | | | |
 | Plate 1 x 6  | Yellow
| 1 | | | |
 | Slope Inverted 45° 2 x 1  | Tan
| 1 | | | |
![Image of part Technic Plate 2 x 6 [5 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211542.jpg) | Technic Plate 2 x 6 [5 Holes]  | Light Bluish Gray
| 1 | | | |
 | Wedge Plate 8 x 3, 22° Left  | Black
| 1 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Black
| 1 | | | |
![Image of part Technic Axle Connector with Axle Hole [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6331716.jpg) | Technic Axle Connector with Axle Hole [Reinforced]  | Black
| 1 | | | |
 | Wedge Plate 8 x 3, 22° Right  | Black
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Green
| 1 | | | |
 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate  | Light Bluish Gray
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Stud Holder  | Black
| 1 | | | |
 | Plate 2 x 3  | Reddish Brown
| 1 | | | |
![Image of part Equipment Hairbrush Short Handle [10mm]](https://cdn.rebrickable.com/media/parts/elements/4243668.jpg) | Equipment Hairbrush Short Handle [10mm]  | Bright Light Orange
| 1 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Red
| 1 | | | |
 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)  | Dark Orange
| 1 | | | |
 | Plate 1 x 4  | Blue
| 1 | | | |
 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate)  | Reddish Brown
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on Side  | White
| 1 | | | |
![Image of part Technic Axle Connector Smooth [with x Hole + Orientation]](https://cdn.rebrickable.com/media/parts/elements/4512363.jpg) | Technic Axle Connector Smooth [with x Hole + Orientation]  | Black
| 1 | | | |
 | Turntable 2 x 2 Plate, Base  | White
| 1 | | | |
 | Wedge Plate 4 x 4 Cut Corner  | Dark Bluish Gray
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474026.jpg) | Dish 2 x 2 Inverted [Radar]  | Black
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6308000.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]  | Black
| 1 | | | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top  | Light Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Dark Purple
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Medium Azure
| 2 | | | |
 | Technic Bush  | Red
| 2 | | | |
 | Plate Special 1 x 2 with Pin Hole on Top  | Dark Bluish Gray
| 2 | | | |
 | Technic Pin without Friction Ridges Lengthwise  | Light Bluish Gray
| 2 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Black
| 2 | | | |
![Image of part Brick Special 1 x 2 Palisade [aka Log]](https://cdn.rebrickable.com/media/parts/elements/4666352.jpg) | Brick Special 1 x 2 Palisade [aka Log]  | Dark Orange
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Red
| 1 | | | |
 | Technic Axle Pin without Friction Ridges Lengthwise  | Tan
| 1 | | | |
 | Brick Round 1 x 1 Open Stud  | Trans-Light Blue
| 1 | | | |
 | Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed  | Black
| 1 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265401.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | White
| 1 | | | |
 | Plate 1 x 2  | Red
| 1 | | | |
 | Technic Axle 3 with Stop  | Reddish Brown
| 1 | | | |
 | Tile 1 x 2 with Groove  | Dark Purple
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Tan
| 1 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4211599.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Black
| 1 | | | |
 | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6330189.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]  | Black
| 1 | | | |
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg) | Technic Axle 5.5 with Stop [Rounded Short End]  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle 2 Notched  | Red
| 1 | | | |
 | Brick Special 1 x 2 with Vertical Closed Handle on Edge  | Light Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]](https://cdn.rebrickable.com/media/parts/elements/4611702.jpg) | Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]  | Light Bluish Gray
| 1 | | | |
 | Launcher Trigger, Weapon Gun Trigger  | Dark Bluish Gray
| 2 | | | |
 | Plate Special 2 x 2 with Towball and Hole  | Black
| 1 | | | |