 | Brick Round 2 x 2 Truncated Cone with Silver and Copper Droid Print (R5-J2)  | Black
| 1 | | | |
 | Neckwear Cape, Pauldron with Black Neck and Black Stripes Print  | Orange
| 1 | | | |
 | Brick Round Corner 4 x 8 Full Brick Double  | Light Bluish Gray
| 2 | | | |
 | Minifig Head Boba Fett / Jango Fett, Stubble, Arched Eyebrows, White Pupils and Scars Print  | Light Nougat
| 1 | | | |
 | Hair, Smooth  | Tan
| 1 | | | |
 | Torso Jacket with Red and Blue Rank Badge Print (Imperial Officer), Dark Bluish Gray Arms, Black Hands  | Dark Bluish Gray
| 1 | | | |
![Image of part Dish 4 x 4 Inverted [Radar] with TIE Hatch Print](https://cdn.rebrickable.com/media/parts/elements/4225832.jpg) | Dish 4 x 4 Inverted [Radar] with TIE Hatch Print  | Dark Bluish Gray
| 1 | | | |
 | Helmet Mandalorian with Holes, Weathered Dark Red, Dark Green and Silver Print  | Sand Green
| 1 | | | |
 | Tile Round 2 x 2 with Bottom Cross  | Dark Tan
| 2 | | | |
 | Bar 1 x 12 with 1 x 2 Plate End with Solid Studs and 1 x 1 Round Plate End  | Light Bluish Gray
| 12 | | | |
 | Minifig Head, Eyebrows, Chin Dimple Print  | Light Nougat
| 1 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation with Blue and Gray Astromech Droid Print (R2-D2)  | White
| 1 | | | |
 | Tile Round 2 x 2 with Bottom X Cross, Black Tie Fighter Print  | Light Bluish Gray
| 2 | | | |
 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole  | Dark Tan
| 2 | | | |
 | Helmet Skiff Guard with Printed Facegear and Headband  | Dark Brown
| 1 | | | |
 | Brick Round 2 x 2 Dome Top, Hollow Stud with Blue Print (R2-D2)  | Light Bluish Gray
| 1 | | | |
 | Plate Special 6 x 12 with Studs on 3 Edges  | Black
| 8 | | | |
![Image of part Minifig Head Kithaba, Green Facial Lines Print [Hollow Stud]](https://cdn.rebrickable.com/media/parts/elements/6004725.jpg) | Minifig Head Kithaba, Green Facial Lines Print [Hollow Stud]  | Olive Green
| 1 | | | |
 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section  | Dark Tan
| 2 | | | |
 | Minifig Head, Chin Strap, Black Goggles / Stern Eyebrows no Goggles Print  | Light Nougat
| 1 | | | |
 | Helmet Stormtrooper, Dotted Mouth and Dirt Stains Print  | White
| 1 | | | |
 | Helmet Stormtrooper, Dotted Mouth and Dirt Stains Print  | White
| 1 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Black
| 4 | | | |
 | Helmet Death Star Trooper  | Black
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Dark Tan
| 8 | | | |
 | Leg Mechanical - Droid with Technic Pin  | White
| 2 | | | |
 | Hat Rag Wrap / Bandana  | Dark Red
| 1 | | | |
 | Helmet AT-AT / Tie Pilot, Silver Imperial Pilot Logo Print  | Black
| 1 | | | |
 | Tile Special 1 x 1 with Clip and Straight Tips  | Dark Bluish Gray
| 5 | | | |
 | Plate 1 x 10  | Light Bluish Gray
| 12 | | | |
 | Torso Flight Suit with Control Panel and Tubes Print (TIE Pilot), Black Arms and Hands  | Black
| 1 | | | |
 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs  | Dark Bluish Gray
| 8 | | | |
 | Torso Droid Plates, with Blue, Red and White Wires Print (C-3PO), Pearl Gold Arms and Hands  | Pearl Gold
| 1 | | | |
 | Leg Mechanical - Droid with Technic Pin  | Black
| 2 | | | |
![Image of part Minifig Head Boba Fett / Stormtrooper, Balaclava with Light Nougat Face, Stubble and Rakish Smile Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6029233.jpg) | Minifig Head Boba Fett / Stormtrooper, Balaclava with Light Nougat Face, Stubble and Rakish Smile Print [Blocked Open Stud]  | Black
| 1 | | | |
![Image of part Minifig Head Boba Fett / Stormtrooper, Balaclava with Light Nougat Face, Stubble and Rakish Smile Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6029233.jpg) | Minifig Head Boba Fett / Stormtrooper, Balaclava with Light Nougat Face, Stubble and Rakish Smile Print [Blocked Open Stud]  | Black
| 1 | | | |
![Image of part Minifig Head Boba Fett / Stormtrooper, Balaclava with Light Nougat Face, Stubble and Rakish Smile Print [Blocked Open Stud]](https://cdn.rebrickable.com/media/parts/elements/6029233.jpg) | Minifig Head Boba Fett / Stormtrooper, Balaclava with Light Nougat Face, Stubble and Rakish Smile Print [Blocked Open Stud]  | Black
| 1 | | | |
 | Cone Half 8 x 4 x 6  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 8 with Groove  | Light Bluish Gray
| 8 | | | |
 | Slope 33° 2 x 2 Double  | Dark Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 1 Double / Inverted with Bottom Stud Holder  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 2 with Groove  | Light Bluish Gray
| 12 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Light Bluish Gray
| 4 | | | |
 | Torso Armor Stormtrooper, Detailed Armor, Dirt Stains Print, White Arms, Black Hands  | White
| 1 | | | |
 | Torso Armor Stormtrooper, Detailed Armor, Dirt Stains Print, White Arms, Black Hands  | White
| 1 | | | |
 | Slope Inverted 65° 6 x 6 x 2 Quad with Cutouts  | Dark Bluish Gray
| 2 | | | |
 | Dish 6 x 6 Inverted (Radar) with Solid Studs  | Light Bluish Gray
| 1 | | | |
 | Minifig Neckwear Jet Pack with Nozzles (Mandalorian)  | Sand Green
| 1 | | | |
 | Tile 1 x 6 with Groove  | Light Bluish Gray
| 8 | | | |
![Image of part Dish 8 x 8 Inverted [Radar], Solid Studs, Rounded Anti-stud Underside](https://cdn.rebrickable.com/media/parts/elements/4268409.jpg) | Dish 8 x 8 Inverted [Radar], Solid Studs, Rounded Anti-stud Underside  | Dark Bluish Gray
| 1 | | | |
 | Minifig Head Special, Protocol Droid with Yellow Eyes Print (C-3PO / K-3PO)  | Pearl Gold
| 1 | | | |
 | Road Sign Clip-on 2.2 x 2.667 Triangular  | Reddish Brown
| 2 | | | |
 | Plate 2 x 8  | Black
| 8 | | | |
 | Wedge Curved 8 x 3 x 2 Open Left  | Reddish Brown
| 1 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Black
| 4 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4271344.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]  | Dark Bluish Gray
| 8 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Trans-Clear
| 6 | | | |
 | Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation with Copper and Silver Imperial Astromech Droid Print  | Black
| 1 | | | |
 | Plate 2 x 16  | Dark Bluish Gray
| 3 | | | |
 | Plate Special 1 x 2 with 1 Stud without Groove (Jumper)  | Dark Bluish Gray
| 4 | | | |
 | Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 1 Support Wall on Bottom  | Black
| 8 | | | |
 | Weapon Pike / Spear Round End  | Pearl Titanium
| 1 | | | |
![Image of part Minifig Neckwear Bracket [One Stud]](https://cdn.rebrickable.com/media/parts/elements/4211760.jpg) | Minifig Neckwear Bracket [One Stud]  | Light Bluish Gray
| 1 | | | |
![Image of part Minifig Neckwear Bracket [One Stud]](https://cdn.rebrickable.com/media/parts/elements/4211760.jpg) | Minifig Neckwear Bracket [One Stud]  | Light Bluish Gray
| 1 | | | |
 | Hips and Pearl Gold Legs  | Pearl Gold
| 1 | | | |
 | Plate 2 x 12  | Black
| 4 | | | |
 | Hat / Kepi / Cavalry Cap  | Dark Bluish Gray
| 1 | | | |
 | Wedge Curved 8 x 3 x 2 Open Right  | Reddish Brown
| 1 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 10 | | | |
 | Equipment Binoculars  | Light Bluish Gray
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/ldraw/71/4085c.png) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Light Bluish Gray
| 2 | | | |
 | Hips and Tan Legs  | Tan
| 1 | | | |
 | Plate 1 x 4  | Light Bluish Gray
| 8 | | | |
 | Plate 1 x 12  | Black
| 4 | | | |
 | Brick 1 x 2  | Light Bluish Gray
| 5 | | | |
 | Plate 1 x 8  | Black
| 4 | | | |
 | Wedge Plate 6 x 3 Left  | Black
| 12 | | | |
 | Plate 2 x 2  | Black
| 12 | | | |
 | Wedge Plate 6 x 3 Right  | Black
| 12 | | | |
 | Weapon Gun / Blaster Small (Star Wars)  | Black
| 4 | | | |
 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs  | Light Bluish Gray
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]](https://cdn.rebrickable.com/media/parts/elements/6335378.jpg) | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]  | Light Bluish Gray
| 6 | | | |
 | Plate 1 x 2  | Black
| 9 | | | |
 | Brick 1 x 4  | Tan
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/4210632.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Dark Bluish Gray
| 2 | | | |
 | Cone 2 x 2 x 2, Open Stud  | Light Bluish Gray
| 4 | | | |
 | Tile 1 x 2 with Groove  | Dark Tan
| 6 | | | |
![Image of part Bracket 1 x 2 - 1 x 4 [Square Corners]](https://cdn.rebrickable.com/media/parts/elements/4211358.jpg) | Bracket 1 x 2 - 1 x 4 [Square Corners]  | Light Bluish Gray
| 2 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4211570.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Light Bluish Gray
| 8 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 8 | | | |
 | Plate Special 1 x 4 with 2 Studs  | Dark Bluish Gray
| 4 | | | |
 | Tile 1 x 2 with Stylised Computer Console Print  | Light Bluish Gray
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Light Bluish Gray
| 12 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515369.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Light Bluish Gray
| 12 | | | |
 | Slope 30° 1 x 1 x 2/3 (Cheese Slope)  | Light Bluish Gray
| 9 | | | |
 | Plate 2 x 4  | Dark Bluish Gray
| 5 | | | |
 | Plate 2 x 6  | Dark Bluish Gray
| 5 | | | |
 | Weapon Gun / Blaster Long (Star Wars)  | Black
| 1 | | | |
![Image of part Plate Special 1 x 1 with Clip Vertical [Thick U Clip]](https://cdn.rebrickable.com/media/parts/elements/408526.jpg) | Plate Special 1 x 1 with Clip Vertical [Thick U Clip]  | Black
| 2 | | | |
 | Slope 30° 1 x 2 x 2/3  | Light Bluish Gray
| 4 | | | |
 | Bar 6L with Stop Ring  | Black
| 4 | | | |
 | Wedge 3 x 3 Facet  | Tan
| 4 | | | |
 | Tile 1 x 6 with Groove  | Dark Tan
| 4 | | | |
 | Slope Inverted 45° 2 x 1  | Light Bluish Gray
| 6 | | | |
 | Plate 1 x 1  | Dark Bluish Gray
| 6 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Black
| 10 | | | |
 | Plate 1 x 2  | Dark Bluish Gray
| 6 | | | |
 | Bracket 1 x 2 - 2 x 2  | Black
| 6 | | | |
 | Plate Special 1 x 2 with Door Rail  | Light Bluish Gray
| 6 | | | |
![Image of part Weapon Axe Head, Clip-on (Viking) [Thick Clip]](https://cdn.rebrickable.com/media/parts/elements/4613958.jpg) | Weapon Axe Head, Clip-on (Viking) [Thick Clip]  | Pearl Titanium
| 1 | | | |
 | Technic Gear 20 Tooth Bevel  | Tan
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/374726.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Black
| 3 | | | |
 | Weapon Gun / Blaster Short (Star Wars)  | Black
| 1 | | | |
 | Weapon Gun / Blaster Short (Star Wars)  | Black
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Light Bluish Gray
| 6 | | | |
 | Plate 2 x 2  | White
| 6 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4515368.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Black
| 8 | | | |
 | Plate 2 x 2 Corner  | Dark Bluish Gray
| 4 | | | |
 | Plate 1 x 3  | Light Bluish Gray
| 4 | | | |
 | Technic Brick 1 x 1 with Pin Hole  | Yellow
| 6 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Light Bluish Gray
| 4 | | | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Light Bluish Gray
| 4 | | | |
 | Tile 1 x 4 with Groove  | Light Bluish Gray
| 2 | | | |
 | Tile 1 x 4 with Groove  | Dark Bluish Gray
| 2 | | | |
 | Tile 2 x 2 with Groove  | Reddish Brown
| 3 | | | |
 | Headwear Accessory Rangefinder for Helmet, with Holes (Star Wars Clone Trooper)  | Dark Bluish Gray
| 3 | | | |
 | Slope Curved 4 x 1 Double with No Studs  | Light Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Reddish Brown
| 7 | | | |
![Image of part Technic Plate 2 x 4 [3 Holes]](https://cdn.rebrickable.com/media/parts/elements/4211444.jpg) | Technic Plate 2 x 4 [3 Holes]  | Light Bluish Gray
| 3 | | | |
 | Brick 1 x 1  | Dark Bluish Gray
| 4 | | | |
 | Plate 1 x 4  | Black
| 4 | | | |
 | Plate 2 x 3  | Light Bluish Gray
| 4 | | | |
 | Headwear Accessory Visor (Star Wars Clone Trooper)  | Dark Bluish Gray
| 4 | | | |
 | Brick 2 x 6  | Black
| 1 | | | |
 | Hinge Brick 1 x 2 Base  | Dark Bluish Gray
| 2 | | | |
 | Plate 2 x 10  | Reddish Brown
| 2 | | | |
 | Seat / Chair 2 x 2 with Center Sprue Mark  | Dark Bluish Gray
| 1 | | | |
 | Bar 4L (Lightsaber Blade / Wand)  | Trans-Bright Green
| 1 | | | |
![Image of part Slope Inverted 33° 3 x 2 [Connections between Studs]](https://cdn.rebrickable.com/media/parts/elements/4211064.jpg) | Slope Inverted 33° 3 x 2 [Connections between Studs]  | Dark Bluish Gray
| 3 | | | |
 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small  | White
| 9 | | | |
 | Brick 2 x 2 Corner  | Light Bluish Gray
| 2 | | | |
 | Slope 18° 4 x 1  | Dark Bluish Gray
| 2 | | | |
 | Plate Special 1 x 6 with Train Wagon End Fence  | Dark Tan
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Green
| 4 | | | |
![Image of part Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4179355.jpg) | Technic Brick 1 x 2 [2 Pin Holes]  | Red
| 4 | | | |
 | Bracket 1 x 2 - 1 x 2 Inverted  | Dark Bluish Gray
| 4 | | | |
![Image of part Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]](https://cdn.rebrickable.com/media/parts/elements/4210828.jpg) | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]  | Dark Bluish Gray
| 4 | | | |
 | Plate Round Corner 3 x 3  | Reddish Brown
| 4 | | | |
 | Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank  | Black
| 2 | | | |
 | Tile 1 x 2 with Groove  | Tan
| 2 | | | |
 | Panel 1 x 1 x 1 Corner  | Light Bluish Gray
| 2 | | | |
 | Bar 6L with Stop Ring  | Black
| 2 | | | |
 | Tile 1 x 2 with Groove  | Dark Bluish Gray
| 2 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Tan
| 5 | | | |
 | Windscreen 8 x 4 x 2 with 4 Studs and Handle  | Dark Tan
| 2 | | | |
 | Bracket 2 x 2 - 2 x 2  | Light Bluish Gray
| 2 | | | |
 | Plate Special 2 x 2 with Bar Frame Octagonal  | White
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Metallic Silver
| 2 | | | |
![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211664.jpg) | Dish 4 x 4 Inverted [Radar]  | Light Bluish Gray
| 1 | | | |
 | Hinge Brick 1 x 2 Top Plate Thin  | Light Bluish Gray
| 1 | | | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Metallic Silver
| 1 | | | |
 | Plate Special 10 x 10 Octagonal with Hole  | Dark Tan
| 1 | | | |
![Image of part Dish 4 x 4 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/4211664.jpg) | Dish 4 x 4 Inverted [Radar]  | Light Bluish Gray
| 1 | | | |
 | Hinge Plate 3 x 4 Locking Dual 2 Finger, 9 Teeth  | Dark Bluish Gray
| 1 | | | |
 | Plate 4 x 6  | Dark Bluish Gray
| 1 | | | |
 | Plate 4 x 6  | Reddish Brown
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Dark Bluish Gray
| 4 | | | |
 | Wedge Plate 2 x 4  | Light Bluish Gray
| 4 | | | |
 | Wedge Plate 2 x 4  | Black
| 4 | | | |
 | Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye  | Trans-Red
| 2 | | | |
 | Brick Round 2 x 2 with Axle Hole  | Reddish Brown
| 2 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Bluish Gray
| 4 | | | |
 | Slope 30° 1 x 2 x 2/3  | Tan
| 2 | | | |
![Image of part Plate Special 1 x 2 [Top Clip]](https://cdn.rebrickable.com/media/parts/elements/4598526.jpg) | Plate Special 1 x 2 [Top Clip]  | Light Bluish Gray
| 4 | | | |
 | Plate 2 x 4  | Tan
| 3 | | | |
 | Plate 2 x 3  | Blue
| 3 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529240.jpg) | Cone 1 x 1 [Top Groove]  | Dark Bluish Gray
| 6 | | | |
 | Aircraft Fuselage Curved Aft Section 6 x 10 Top  | Reddish Brown
| 1 | | | |
 | Tile 2 x 2 with Groove  | Dark Bluish Gray
| 1 | | | |
 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End  | Reddish Brown
| 1 | | | |
![Image of part Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/4211441.jpg) | Technic Brick 1 x 4 [3 Pin Holes]  | Light Bluish Gray
| 1 | | | |
 | Plate 2 x 2  | Dark Bluish Gray
| 2 | | | |
 | Brick Curved 1 x 2 x 1 1/3 with Curved Top  | White
| 2 | | | |
 | Wedge Curved 4 x 4 No Top Studs  | Dark Tan
| 1 | | | |
![Image of part Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]](https://cdn.rebrickable.com/media/parts/elements/4271344.jpg) | Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]  | Dark Bluish Gray
| 1 | | | |
 | Plate 1 x 2  | Blue
| 3 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Tan
| 3 | | | |
 | Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots  | Blue
| 4 | | | |
 | Plate 2 x 2  | Light Bluish Gray
| 2 | | | |
 | Slope 45° 2 x 2  | Tan
| 2 | | | |
![Image of part Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]](https://cdn.rebrickable.com/media/parts/elements/6092659.jpg) | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]  | Reddish Brown
| 2 | | | |
![Image of part Slope 45° 2 x 1 with 2/3 Cutout [Original Version]](https://cdn.rebrickable.com/media/parts/ldraw/72/92946.png) | Slope 45° 2 x 1 with 2/3 Cutout [Original Version]  | Dark Bluish Gray
| 2 | | | |
 | Plate 2 x 3  | Reddish Brown
| 2 | | | |
 | Headwear Accessory Rangefinder for Helmet, with Holes (Star Wars Clone Trooper)  | Dark Bluish Gray
| 1 | | | |
 | Wedge Plate 3 x 2 Right  | Blue
| 1 | | | |
 | Hinge Brick 2 x 2 Top Plate Thin  | Black
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | White
| 1 | | | |
 | Plate Special 2 x 2 with 2 Pin Holes  | Light Bluish Gray
| 2 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 3 | | | |
 | Plate 1 x 2  | Yellow
| 2 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/370026.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Black
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Light Bluish Gray
| 2 | | | |
 | Lever Small Base with Black Lever  | Light Bluish Gray
| 3 | | | |
 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate  | Dark Bluish Gray
| 2 | | | |
 | Slope 65° 2 x 2 x 2 with Bottom Tube  | Dark Tan
| 1 | | | |
 | Technic Axle and Pin Connector Angled #1  | Light Bluish Gray
| 1 | | | |
 | Slope 45° 2 x 1 with Bottom Pin  | Dark Tan
| 2 | | | |
 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole  | Black
| 2 | | | |
![Image of part Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin](https://cdn.rebrickable.com/media/parts/elements/4210935.jpg) | Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4210660.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Dark Bluish Gray
| 2 | | | |
![Image of part Technic Brick 1 x 2 [1 Pin Hole]](https://cdn.rebrickable.com/media/parts/elements/4211252.jpg) | Technic Brick 1 x 2 [1 Pin Hole]  | Reddish Brown
| 2 | | | |
 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth  | Light Bluish Gray
| 2 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Reddish Brown
| 1 | | | |
 | Plate 1 x 4  | Dark Bluish Gray
| 1 | | | |
 | Plate Round 1 x 1 with Solid Stud  | Trans-Red
| 3 | | | |
 | Wedge Plate 3 x 2 Left  | Blue
| 1 | | | |
 | Plate Special 1 x 2 with Clip Horizontal on End  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265401.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | White
| 2 | | | |
![Image of part Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]](https://cdn.rebrickable.com/media/parts/elements/4263176.jpg) | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]  | Dark Bluish Gray
| 3 | | | |
 | Tile Special 2 x 2 with Top Pin  | Dark Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/254026.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Black
| 2 | | | |
 | Weapon Lightsaber Hilt with Bottom Ring  | Black
| 1 | | | |
 | Plate Special 3 x 2 with Rounded End, Hole  | Dark Bluish Gray
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4244627.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | Light Bluish Gray
| 1 | | | |
![Image of part Dish 2 x 2 Inverted [Radar]](https://cdn.rebrickable.com/media/parts/elements/474026.jpg) | Dish 2 x 2 Inverted [Radar]  | Black
| 1 | | | |
![Image of part Technic Axle 5.5 with Stop [Rounded Short End]](https://cdn.rebrickable.com/media/parts/elements/4508553.jpg) | Technic Axle 5.5 with Stop [Rounded Short End]  | Dark Bluish Gray
| 2 | | | |
 | Brick Arch 1 x 6 Raised Arch  | Dark Bluish Gray
| 1 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 2 | | | |
![Image of part Plate Special 1 x 2 with Clips Horizontal [Open O Clips]](https://cdn.rebrickable.com/media/parts/elements/6310268.jpg) | Plate Special 1 x 2 with Clips Horizontal [Open O Clips]  | Black
| 1 | | | |
 | Slope 45° 2 x 2  | Tan
| 1 | | | |
 | Hinge Plate 2 x 2 Locking with 1 Finger on Top  | Light Bluish Gray
| 2 | | | |
 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End  | Red
| 2 | | | |
![Image of part Plate Special 1 x 2 with Handle on End [Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4521187.jpg) | Plate Special 1 x 2 with Handle on End [Closed Ends]  | Dark Bluish Gray
| 1 | | | |
 | Bracket 1 x 2 - 2 x 2  | Dark Bluish Gray
| 1 | | | |
 | Tap 1 x 1 without Hole in Spout  | Black
| 2 | | | |
 | Wedge Curved Inverted 6 x 4  | Black
| 1 | | | |
 | Handlebars  | Black
| 1 | | | |
 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced  | Light Bluish Gray
| 2 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 2 | | | |
![Image of part Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/265426.jpg) | Plate Round 2 x 2 with Rounded Bottom [Boat Stud]  | Black
| 1 | | | |
 | Hinge Plate 1 x 4 Locking Dual 1 Finger  | Light Bluish Gray
| 1 | | | |
 | Tile Special 1 x 2 Grille with Bottom Groove  | Trans-Red
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | White
| 1 | | | |
![Image of part Plate Special 1 x 2 Side Handle [Free Ends]](https://cdn.rebrickable.com/media/parts/elements/4211632.jpg) | Plate Special 1 x 2 Side Handle [Free Ends]  | Light Bluish Gray
| 1 | | | |
 | Plate Round 4 x 4 with Pin Hole  | Dark Bluish Gray
| 1 | | | |
![Image of part Cone 1 x 1 [Top Groove]](https://cdn.rebrickable.com/media/parts/elements/4529242.jpg) | Cone 1 x 1 [Top Groove]  | Reddish Brown
| 1 | | | |
 | Plate 1 x 2  | Blue
| 1 | | | |
 | Plate 2 x 2  | Reddish Brown
| 1 | | | |
 | Plate Special 2 x 2 with Groove and Center Stud (Jumper)  | Reddish Brown
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Dark Bluish Gray
| 1 | | | |
 | Technic Axle 3 with Stud  | Dark Tan
| 1 | | | |
![Image of part Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4222017.jpg) | Plate Special 1 x 2 [Side Handle Closed Ends]  | White
| 1 | | | |
 | Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)  | Black
| 1 | | | |
 | Tile Special 1 x 2 with Handle  | Black
| 1 | | | |
 | Technic Axle Pin with Friction Ridges Lengthwise  | Blue
| 1 | | | |
 | Technic Pin 1/2 with 2L Bar Extension  | Light Bluish Gray
| 1 | | | |
 | Technic Axle 2 Notched  | Red
| 1 | | | |
 | Technic Axle 4 with Stop  | Dark Bluish Gray
| 1 | | | |